I got an RTX 3060! (Installation And Setup Guide)

[@gamersseries7827]

Congratulations on the rtx 3060

[@Nodly.]

you are the best man love you so much i hope you just get the moste luck in the world

[@xxsir_slackxx9091]

I have watched a few of these vids for the rtx 3060 instillation and all of the people so far have something in common. None of them remember to change the battery in their smoke detectors. Beep*

[@M20UBR88]

Lmao 🤣 SAME

[@arielbustos9498]

i am the 555 like Sr thank you for your video

[@azy3929]

Thanks gentle dude from the other site of the sea

[@dgmaffi]

Complete noob question: If I am uninstalling a gtx 1660 ti and installing a RTX 3060 do I need to uninstall drivers before replacing GTX 1660 ti. Or is that only if I was switching from Nvidia to AMD?

[@M20UBR88]

Hi personally, when I swap out gpus, I don't delete the drivers for the old one. I just install the new drivers for the new card, and everything works fine

[@dgmaffi]

@@M20UBR88 Great! thank you for your reply! Much appreciated!

[@dgmaffi]

@@M20UBR88 Success. I did not delete any drivers before installing and everything works great! Thanks again!

[@F1n13y]

What graphics card power cables do you have Becuase I don’t have what one I need

[@M20UBR88]

I have a 650 watt psu from cooler master and that had the cables I needed but to make it look nice I order custom cables from easy DIY on amazon

[@DLore-ew3bt]

@@M20UBR88 by any chance could you put down a link, or the name of the product I've been looking for the cable a while now and I haven't been able to find or make sure that I've found the right cables, it would help a lot thanks!

[@johnhamilton6205]

Hope you saved some money to buy a 9v battery for your smoke alarm?

[@MegaVortex]

Came here to say this. lol

[@johnhamilton6205]

@@MegaVortex no it’s called a drive bye!!!!

[@xAdrianstf]

Hello, Little to late but i got a rtx 3060 and I can't seem to find a PCI-e with 8+6 can you provide me the link pls?

[@pradipkumarkar5106]

great video

[@arisblask5663]

nice Video

[@ANONYMOUS-wr9qu]

8:09 why is only 1 fan rotating and not the other? is that used when a certain temp is reached or during overclock?

[@M20UBR88]

Unfortunately my GPU had a fault with the fan but I was able to send it back and get a replacement it looked like it could have been repaired but the technician said to just leave it and get the free replacement

[@M20UBR88]

If your having any issues try returning the gpu if you can

[@AJediSurvivor]

You should also be using ddu to wipe the drivers before installing a new gpu

[@alejandrolovato8064]

What cpu do you run if you don’t mind me asking? I’m just getting into building a pc and am looking to purchase the same graphics card. Im not very well versed in all of it yet but im looking for a cpu that’s not too expensive but also won’t bottle neck my gpu. Any help would be appreciated!

[@M20UBR88]

I have the ryzen 5 3600x however if you want a solid chip that new the Ryzen 5 5600 and 5600x are a good choice aswell if you have any more questions feel free to ask also a sub to the channel would mean a lot. Thx

[@dirty_aztek619]

Kool video ez installation...but u didn't show how u uninstall the driver of the old gpu or u don't have to?

[@SeagulzzJenkins]

TY I was wondering why my fans werent spinning.

[@fex8821]

i got a rtx 3060 and in mw2 i get 140 fps and in warzone 80fps how can i fix this beacuse my friends get like 100 fps and they got a 2060

[@M20UBR88]

If your running high settings that seems right so there's nothing wrong although one thing you can do just to make sure it check your drivers to make sure they are the latest ones

[@fex8821]

@@M20UBR88 i play low and got the latest drivers

[@M20UBR88]

In that case try and return the gpu as it might be a faulty unit you should not be getting 80 fps on low settings that's not good

[@M20UBR88]

In forza horizon 5 I was getting almost 120 fps on extreme settings so theres a chance that your gpu is faulty

[@fex8821]

@@M20UBR88 aight

[@kx5517]

Did the case come with power cables or is it only the graphics card?

[@jeremyjones8737]

the cables would be with power supply. no power cables with GPUs

[@abeck78]

In this video the MSI 3060 shows to have 6 pin and 8 pin connectors. On Newegg and other sites, pictures show only one 8 pin connector. No 6 pin. Are there two versions? I need an adaptor for my PSU, but I want to purchase the right one.

[@M20UBR88]

Yes I have also seen this as well the RTX3060 gpus from MSI have a 6 and 8 pin connector like the one it the video but other brands have different power requirements hope this help you if not feel free to ask for more information

[@chrisbauer9434]

But you can't seem to replace the battery in your smoke detector. Ridiculous.

[@M20UBR88]

😂👍

[@ibraheemali3562]

Hi I ordered a asus GeForce rtx 4060 and do I use nvidia GeForce to download drivers?

[@ibraheemali3562]

@randommatrix4180 hi, yeah I got my pc over a month ago and is a beast 😊

[@M20UBR88]

The card I showed in the video actually stopped working after 2 weeks so hopefully you guys have better luck the good news is I got a refund within that same week

[@M20UBR88]

Yes or you can use G force experience

[@ibraheemali3562]

@@M20UBR88 yes , I use GeForce experience and works amazingly

[@danpryle313]

do i need 2 plug in both 8 pin slot or just one? im not OCing. kind of new 2 this. dont want 2 fry sumthing.

[@M20UBR88]

Hi yes you will have to plug in both 8 pins as the card is factory OC and its advised that you do. If you don't mind could you drop a like and subscribe it means a lot thanks. If you have any further questions feel free to ask

[@abeck78]

There are actually 8 pin and 6 pin power connectors. Question: I have an older 650 Watt Ultra PSU with two 6 pin PCIe connectors, but no 8 pin connector. Can I use a 6 to 8 pin adapter for the second connector?

[@yazandabbour3980]

Do you think rtx 3060 with i5 10th gen is good ?

[@M20UBR88]

Unfortunately, yes, the core I5 10th gen will bottleneck the rtx 3060 it will reduce the performance by almost 10%, if not more. I'd recommend the core i7 10th gen or if you want to switch the ryzen a R5 5600 would work hope this helps you if you have anymore questions feel free to ask.

[@davidchoni799]

What about core i5 11th gen with rtx 3060?

[@chemonunez12345]

How did you make the logo light up of the gpu? I can’t figure it out

[@M20UBR88]

Unfortunately I can’t figure at how to do it as mine was already on out of the box 📦 if I do find out I’ll make sure to post it in the comments 👍

[@kostaricagocrazy]

What case is that ??

[@M20UBR88]

Deepcool matrexx 70 MID Tower

[@dugolo]

what are the two cables you connected to it ?

[@Singh93031]

you found out yet?

[@azy3929]

I have a default pcie cable from 750w source, is a 8 pin pcie cable with 2 of theme little longer. Card has 8 pin entry but cable enter full only on those 2 longer, other six half way and no click sound of any type. Is this normal?

[@exonova9796]

Does it work though and is it stable

[@ZEROCh_KJCh]

I'm prefer doin full uninstall with DDU first.

[@kellyfaria863]

i got the same 3060 that you have but i don't have 2 cables to connect

[@M20UBR88]

You can use the cables that are on your power supply there are no included cables in the box hope this helps you if you have anymore questions feel free to ask

[@kellyfaria863]

@@M20UBR88 i dont have a 8 pin one, but i had a 2 pin and a 6pin so i put them together in the 8 pin slot and still not working, when i turn on the computer there a light on the mother board

[@M20UBR88]

You need 8 pin plus a 6 pin to power this graphics card it won't work with just a 8 pin

[@kellyfaria863]

@@M20UBR88 nvm my mother board wasn't good enough and power supply so i bought better ones and it should work ill kept you updated they arrive January 1-12, if anything goes wrong, thanks for the help

[@M20UBR88]

Your welcome and also thank you for letting me know with this info I can help other people who might have thr same issue.thx

[@carlosvolpe8781]

What is case?

[@M20UBR88]

Deepcool Matrix 70 mid Tower case

[@blackburn8060]

You forget to fix screws lol

[@M20UBR88]

Lol don't worry they're in 😅

[@blackburn8060]

@@M20UBR88 ok lol

[@mr_super_kinky600]

in my opinion... i would not press the case against wall like you you ... this machine need breath air :)

[@timmyjohnson2285]

Change the batteries in your smoke detector!!!!!!

[@unknownuser-ff2xx]

how to turn on the rbg on the gpu?? mine doesn’t work

[@fgioxz91]

bro all gpu dont have rgb what do u mean lmao

[@joshdaniel8009]

👍

[@stealth_meister4939]

I have actual screws, not thumb screws... I don' have a screwdriver and my PC is just fucked right now because of a possible seating issue with the card. fml

[@grahamhall2662]

bad technician! spinning the fans like that can ruin your gpu.

[@AJediSurvivor]

It literally won't hurt it whatsoever.

[@judidiahjudson9213]

Shut up nerd

[@juzzwAA003]

Lol it can't produce static electricity on low rpm

[@imreallynotfunny4423]

Shut up