I don't really watch your videos to learn about speaker theory and building (although I have learned a lot from them) , I watch them to relax (It's a stressful world) . That said , I really enjoyed how you answered the guys complaint about you using your videos to promote your kits by using his comment to promote your kits ! (BEAST) Have fun Kirby , and keep up the good work . 😁
@torsionslo5 жыл бұрын
Haters gonna hate... keep on keepin on Kirby.. you are doing beautiful work and many benefit from it. Myself included.. and it's appreciated.
@KirbyMeetsAudio5 жыл бұрын
Thanks Joe!
@dennychimes975 жыл бұрын
Kirby! If people want to talk equations and parameters and theory, there are countless places on the internet to find all that information from experts and novices alike. I’ve been to them allllll. But this is the ONLY place I’ve found where the build process is so elegantly documented through well filmed, cleanly edited, and well balanced color ON THE INTERNET. Not to mention the woodworking skills add a lot of value. This isn’t a science Chanel, it’s a inspirational hobbyist doing what he enjoys. As someone who works in acoustic research of all people I should be annoyed by the inset speakers into baffle blah blah it’s a beautiful speaker, not a $20,000 engineering marvel. Keep it up!
@hardcorecap5 жыл бұрын
Looking back on it, one of my two regrets in the DIY audio community is calling out Kirby in the comments on the Impulse video. The other is not building enough. At the time, I had a much more dogmatic approach to design and building. If you weren't building flat frequency, wide off axis response, low group delay, perfect impulse response speakers then why were you doing it? Since then, my ideology, and consequently my criticism, has loosened up and I'm more apt to appreciate what each designer brings to the table, both aesthetically and aurally. If you haven't heard Kirby's interview on the Make or Break Show, I'd highly recommend it. When he mentions the 80/20 rule in regards to speaker building, it's pretty relative to the few times I've done builds. Doing the basics of speaker building - building the right size box, fixing a speaker to the box - gets you 80% of the way there and the next 20% is an uphill climb. And despite any criticism I toss up, I've always super appreciated the videos and enjoyed them.
@ScubaDude685 жыл бұрын
You answered the “called out” question in an eloquent way Kirby; the fun is in the design. Build the speakers the way you want, and enjoy doing it above all else.
@mcaddc5 жыл бұрын
You don't have to apologize for your videos. Speaker box building is an art, and many here appreciate & enjoy your skills, presentation and knowledge. Thank you for all your time & effort in providing us with interesting ideas and builds.
@ChmbrSE7EN5 жыл бұрын
Your response to the 'call out' was perfect. Some people just need a reason to challenge you because they have nothing better to do. They become popular by condemning others. You took that one in stride and I like that. Keep building speakers whatever you want to. I am glad you did this.
@ImpulseAudioSpeakers5 жыл бұрын
Definitely wasn’t calling you out lol. Excellent response and thanks for the link to the video. I break my own best practices sometimes :)
@jaredgray78725 жыл бұрын
Thanks Kirby! I think all your videos are great and it shows you put a lot of time into them I don't mind the plugs for your own work. Out of all the ways people monetise their time making KZbin videos you have one of the most pure and honest ways which most of us appreciate. I've learned a ton from you and picked up plenty of inspiration. Keep doing you!
@arthurwatts16805 жыл бұрын
In your defence, you've made vids that go into detail on crossover and box design - I don't expect you to repeat that with every build vid. Andrew Jones is probably the most accessible 'big name' speaker designer I can think of, but he doesnt bang on about a new speaker just to hear himself talk : there's a payday on the back of all those interviews. Keep em coming, Kirby.
@wicked650s5 жыл бұрын
Thank you for putting this out there, and thank you for having thick skin and not taking any shit from people. Hope you feel better soon.
@KirbyMeetsAudio5 жыл бұрын
Cant let them get you down! Thanks!
@1980JPA5 жыл бұрын
I like the fact that your vids are as simple as they are. I come here for inspiration and creativity. Some other youtubers that you've partnered with at times are the places I go for in depth testing and knowledge about diy enclosures. I love the calm, laid back serene aspect of watching you build speakers. Even down to the lofi music. Keep up the great work, and don't feel pressured to change your style if it's not what you're going for, and not a style that you can really express yourself the way that you'd like. Your vids have a very specific quality that keeps me coming back time and time again. Thanks so much for what you do Kirby, and keep doing it.
@Coreycry5 жыл бұрын
i love the fact you take on "hard questions" , your honesty is appreciated, your knowledge too.. on that part it's true we'd wish some "what/why/how" but hey, videos are free and you DID make instructionnal video before so don't take it too hard on yourself.
@1slotmech5 жыл бұрын
This isn't a channel about building a PC, and you aren't The Verge. (And yes, I can build a PC. 😏) Do what you do, we'll keep watching (and learning). 😌
@ACupOfDuck5 жыл бұрын
I love what you are doing and find your content calming and relaxing. I don't really care for professional critical listening, i want something that looks good and sounds good enough to support my cleaning, and your channel provides the content to make those speakers! Keep up your good work, you are awesome!
@InformatrIIcks5 жыл бұрын
*someone complains that it looks like an add* *Kirby uses the opportunity to make an add* Loved the irony of that scene ^^
@ACupOfDuck5 жыл бұрын
I thought it was funny as heck! 😂
@bradisley5174 жыл бұрын
We sometimes use Corian as a baffle. The epoxy should be fine but without check out if the speaker has a resonant frequency in the audible or near audible range it is not for certain. Harmonics could also effect this.
@gilo51475 жыл бұрын
I have been with the channel for a while now and I can say I like both the walk through and in depth videos. Your ammo box build encouraged me to build my own and from there expand to new build plans and components. Thanks for the inspiration.
@KirbyMeetsAudio5 жыл бұрын
That's so great to hear! Thanks for watching!
@ALEXTESKI5 жыл бұрын
Thanks Kirby, I appreciate your explanation and acknowledgement.
@KirbyMeetsAudio5 жыл бұрын
I appreciated your comment! Thanks for caring enough to comment. I hope you check out my more in depth videos!
@DrGeta6665 жыл бұрын
people use fiberglass for subwoofer enclosures all the time to get into custom shapes in car audio. it's fine as long as it is stiff enough, those thick front baffles would be way overkill so no way would your audio be effected.
@davekimball36105 жыл бұрын
Love the vids , always have, whether they be the 100% informational ones, loved the series going over all the software and such, but also love just straight up build vids with just cutting, assembly and music. Super relaxing like Chris Salomone's videos.
@KirbyMeetsAudio5 жыл бұрын
Agreed! Chris' videos are great to put on and kick back. Thanks Dave!
@arodic5 жыл бұрын
Hey Kirbdude, Your videos inspired me to get into speaker building again after many years! Thank you kindly, that made me happy :) I did Audio Engineering before I switched to computer graphics. Just did a conversion of an old pre-FM radio box into a 2.1 Bluetooth speaker. Made a tons of mistakes but managed to mitigate some of them and the speaker sounds quite nice but too directional in mids and highs. Outdoor listening in 30 degree field is quite alright and decently loud. I'm about to upload a video of my 16-month-old nephew dancing to some funk blasting from the speaker :)
@shanebarrett58274 жыл бұрын
Kirby, you videos are awesome. Although your videos make me stay up too late doing research lol. Keep em coming.
@alexkerrison4115 жыл бұрын
Only recently found your channel. Great content and I have learnt so much about speaker design (crossover video was a great introduction). Speaking as a professional designer, you have a wonderful aesthetic style to your work and superb creative craftsmanship. Keep it up.
@joshcosta4235 жыл бұрын
My goal would be a very decent sounding speaker that has the looks to make them a conversation starter and I think that's where your builds shine.
@eatdrinkwineguy5 жыл бұрын
Keep it up. I do actually quite like just watching various build videos on KZbin. I find it quite relaxing as well. And you have put out several great instructions videos too. You do great stuff and I like your approach. Specifically that you encourage people to approach speaker building with whatever goals they have in mind. If you are gonna sit back once you have made your speaker and be super stoked because it looks good, or sounds good, or is super small or super huge or super colourful or whatever you decide then awesome for you, particularly when you make it yourself.
@Boogerweldz4 жыл бұрын
A rear chamber and port can simulate the recess ed drivers in hornresponse . Use S and L inputs for the enclosure or even vice versa if sealed. There’s an upper band rising response if 2.0xpi with an excessive depth after 1.5-2” on these ‘full range’ 3-5” drivers. You don’t have a driver recessed so deeply and anyone with a comment should provide some info or testing (impulse did a good job of this with results ) to show otherwise.
@mikew76445 жыл бұрын
Kirby, Love the Q&A format. I built your fawn kit this week, first time ever building a speaker. Thank you so much for making these kits available. Everyone loves it and I gladly accept all the compliments I get on the design and sound. (I did upgrade the amp board to the Dayton BT 4.0 board but that's just because I like to roam around with my phone and the BT 2.1 wasn't up to it.) Keep it up! Thanks again.
@KMAaus5 жыл бұрын
Great vid, I did enjoy the Q&A so keep them coming. And I of course you should be promoting your kits in your channel, it makes so much sense, I can’t see why anyone would think that’s a negative. Keep the awesome vids coming, and thank you for putting great content out there.
@tavisi82975 жыл бұрын
Hi. Just wanted to say your great, thanks for the videos, don't let others discourage you in your video making. they are at least entertaining and helpful to me lol. :)
@KirbyMeetsAudio5 жыл бұрын
Thanks Kibble!
@JordanKL15 жыл бұрын
A rear mounted tweeter could be compensated for by using a lower order crossover and/or allowing the tweeter to have a rising response - since a rear mounted tweeter will have a descending response.
@theejoeylee5 жыл бұрын
Unfortunately the dispersion pattern and imaging is also affected but that's negligible in a Bluetooth speaker that's not for critical listening. Who cares about being correct all the time anyway to appease people . Build it how you want to build it. Eventually people will learn to respect the designer and appreciate all the work.
@SteveCarmichael5 жыл бұрын
I like the Q&A video. I used a parts express kit to make a bluetooth speaker on my channel after watching your videos. Thanks for the inspiration to try it.
@natemorales57315 жыл бұрын
Awesome video as always. It's an insight to your thoughts about what you do. Keep it up. Not every video is ment to teach but just to show. (All work and no play makes for a dull day)..... so keep being you and keep the videos as they come. Inspiration to anyone looking to be inspired.
@RTM4595 жыл бұрын
People need to realize that some people use youtube as extra income, come on guys and girls. Keep up the great work my guy.
@endall395 жыл бұрын
I've seen that Impulse video on recessed baffles, and he expected to find a much greater issue than he actually measured. It is negligible impact for a MUCH more attractive speaker. I can see where some off axis response could be affected, but come on. Keep mixing beauty with sound and ignore the nit pickers
@1980JPA5 жыл бұрын
endall39 Exactly. 👍🏾
@aug.jam.15 жыл бұрын
Love your videos man, I like all types of speakers and speaker building videos, both for high quality speakers and design as well. Keep up doing those great videos!
@KirbyMeetsAudio5 жыл бұрын
Will do! Thank you!
@turnersparadise83685 жыл бұрын
TotalBoat has sponsored a few channels, might be worth dropping them a line. I think they are interested in entering epoxy-related markets other than boat building. A couple KZbin creators have had good luck using their resin for casting.
@jdapaetz5 жыл бұрын
Really enjoyed the video; friendly and informative while staying true to what makes KMA, KMA. Keep up the good work!
@jdapaetz5 жыл бұрын
Also, your videos were the kickstarter for my first few bookshelf/monitor builds.
@RFHX2_6.05 жыл бұрын
Thank you for your hard work and everything you do, you’re doing just fine the way you make your videos.
@Azmodan9115 жыл бұрын
Hey Kirby, love the videos including the Q&A type. You definitely have woodworking talent. I would love to have the chance to design my own shop. Maybe a video on that? Still eagerly awaiting the super tower video(s).
@KirbyMeetsAudio5 жыл бұрын
Shop build video coming soon! Thanks for watching!
@deans67pala4 жыл бұрын
Like it, but prefer short commentary with the build. Keep creating!
@FriendlyMountain5 жыл бұрын
Your videos are great and very inspiring. Your personality comes across really well and shows off that sweet heart and desire to do more and better. Deffo a favourite channel.
@joedynamo13255 жыл бұрын
I have a question. Is there a way to make your own Dolby atmos?
@Mrtscrp305 жыл бұрын
Kirby just make videos we love your work this is not Burger king you cant have it your way.thats why its your channel and why we watch your work.
@Ryan_Tidwell5 жыл бұрын
Kirby, Love your channel. Just watched crossover building videos. You said you would cover phase later. Have you made that video? How do you keep your drivers in phase?
@mihaleban13235 жыл бұрын
make a video : mistakes that beginers make while building first speaker
@PokuPokuYeah5 жыл бұрын
Yay ! Kirby met RGB . Is there a chance Kirby wiil one day meet surface exciters ? :) i'd be very curious what kind of result you would get, visualy and of course, ya know... the sound :)
@markoduvall5 жыл бұрын
Thanks, Kirby! I wasn't expecting you to use my question. Are those wooden ear studs? If so, did you make them?
@KirbyMeetsAudio5 жыл бұрын
Thanks for all the comments, Mark! Yep! No, I didn't make these.
@RTM4595 жыл бұрын
Do metal shavings go to a metal shop and I'm sure they will give you everything you need a cnc shop would be best.
@Gradvlax5 жыл бұрын
keep on keeping on dude. Keep inspiring people.
@d3tach3d5 жыл бұрын
Hey, Kirby. You should build a set of Omni-Directional speakers. No one ever does. Have you seen the OHM Walshes? my god.
@BrucesWorldofStuff5 жыл бұрын
I agree with what @Joe Koenig said... Speaker on the outside of the front-face or on the back-side of it, who cares... It doesn't change it that much and at 65 my ears don't care but my eyes do! ... LOL Keep Building!!!! :D
@KirbyMeetsAudio5 жыл бұрын
Agreed! Thanks Bruce!
@nicknewyen5 жыл бұрын
I’d like to see the ultimate speaker build for the beach.
@kucukbarbaros5 жыл бұрын
Id love that too
@BinManSays873 жыл бұрын
If you check out Evan and Katelyn they make loads of resin stuff and they might give you some ideas on the best usage of resin and LEDs and the countless pigments you can apply to it
@amanmazleigh81815 жыл бұрын
Not related to the video, but need advice. I have a friend who asked me to build him a bluetooth speaker with bells and whistles of bass and treble control for 70 USD. I said its very hard for me to meet that kind of budget with the specifications he wanted. Am I being unreasonable?
@derekarmstrong10594 жыл бұрын
Your videos are great, don't change a thing.
@clee24235 жыл бұрын
hey, i've built my first bookshelf speakers with 2 way passive crossover, its sound good, but at high volume, the speaker sounds a bit boxy, how can i improve the sound, i already have a damping material inside, but still sounds a bit boxy, and recently my subwoofer box just finished, its about 65lts or about 2.3 cf, and i'm using 10" subwoofer, although i can fit 12" subwoofer, probably gonna replace the sub to 12".... good video as always ♥♥♥
@EjitWebDesign5 жыл бұрын
I've just found your channel and working my way through everything. Few questions .. Can you do a comparison from a build to off the shelf for price and performance. Also ever thought about a TV unit that could have a sound bar built in? Also when linking to prices can you link to stuff we can get in the UK
@boominc04205 жыл бұрын
Your videos are awesome. Keep up the good work brotha.
@jagdeepsharma17725 жыл бұрын
Hlo Kirby, why u use mostly Dayton audio drivers ,suggest some other good brands
@i_am_blur5 жыл бұрын
In the battle of love vs hate, love inevitably wins. Trolls will undoubtedly spew venom, but in return they are doomed to a lifetime of unhappiness, dissatisfaction and self-loathing. The only power they have is what you give them. So let love win and don't let haters dissuade you from turning out the content YOU WANT to create. You are an audiophile - an artist - a craftsman - and an innovator - and I respect the fck out of you. You keep doing you and all the rest will naturally fall in place. Oh, and I just joined your Patreon. Glad the link was available. No rewards needed Kirby. I'm happy to have the opportunity to support your content and your journey to the mountaintop. Good looking out bro.
@kevinh22725 жыл бұрын
i watch these for ideas Not gospel Keep on keeping on Would like to see a bigger speaker kit and build.
@shawnkarvonen5 жыл бұрын
Excellent ,your so nice ,good vid ,thks.
@benzuckerphotos5 жыл бұрын
Love it!!!
@KirbyMeetsAudio5 жыл бұрын
Hey buddy!
@lawrencemaithyamutie40135 жыл бұрын
To be honest.. if you start explaining some more specs in your builds... It's not gonna be interesting... Coz I always enjoy the simple builds and the background music
@chayannesani46755 жыл бұрын
My speaker is not connecting to calling
@realist12209PRO5 жыл бұрын
I don’t want to be that guy, but what’s the name of the outro song
@zmeon94415 жыл бұрын
Love that video, love your channel and love that promo ;) keep it up!
@KirbyMeetsAudio5 жыл бұрын
hahaha Thanks!
@jefgirdler72325 жыл бұрын
A lot of your videos are a certain sort of therapeutic so I never mind that you don't go TOO in-depth in the majority of the videos. You educate when you need to, but just let the content flow when it wants to breathe a little.
@michaeljohnaustin67455 жыл бұрын
Why shouldn’t your video be for selling your kits. It’s called promotion. And your videos are awesome keep it up .
@meltedfusitediy66255 жыл бұрын
I enjoy the speaker building porn, it's why I started watching. Relaxing to me, keep it up.
@meltedfusitediy66255 жыл бұрын
I've also learned alot too, especially about crossovers, and available equipment out there. Built some computer speakers from the knowledge learned from KMA.
@darronjknight5 жыл бұрын
If you built a motorcycle in 'the most efficient way possible' you would never use a hard tail frame, Springer forks etc etc. Sometimes cool outweighs efficiency...
@roriquevernonii84395 жыл бұрын
I will say I never considered your videos as your self advertisement. In fact, because of your videos, I probably won't buy your product: you have inspired me to build speaker projects myself, so now it's harder to go "backward" to building a pre made kit. (Then again, the fact that you put hands on every kit going out is making me look for an excuse to buy one...)
@KirbyMeetsAudio5 жыл бұрын
Haha That's a great thing! Thanks!
@bobkeller83834 жыл бұрын
The kits are too expensive
@ElectronicsForFun3 жыл бұрын
in all fairness I don't think anybody would watch if you went so much into the depth because the video would be an hour long. if somebody is really interested in building something then they should look into the basics first. these videos are more like idea creators for people who already have an idea of what they want to do, if you're just getting into wood working and speaker designing then these projects are a little advanced for most beginners. for anybody else who wants to complain, I would try a car stereo boombox thing first.
@billymurphy35 жыл бұрын
😂😂 that guy... "hey kirby, I don't feel like you gave me enough information for free. I don't care that you need to make a living. I don't care that I don't understand how much effort goes into these videos. I'm not able to use critical thinking, reasoning, and creativity to build something on my own." You're not entitled to free stuff and it's just good business to redirect viewers and fans to something that helps them, AND also helps you make a living of it. Moron. Rant done.
@jasonsalcido5 жыл бұрын
So I take it the "DIY 2.1 Soundbar" series was cancelled? I enjoyed the first two videos, hope to see more soundbar videos like them, been around since the first couple videos. Your videos don't seem "overly promo-ie" to me ¯\_(ツ)_/¯, but honestly I don't know why you wouldn't throw that in there. I'd rather hear about that than sit through 5 ads in a video.
@craigf90313 жыл бұрын
666th like. Rock on! 🤘
@jshobe41145 жыл бұрын
Bro, "promo video"? Nah. I found your channel by looking for different build projects. One of your builds actually helped me with a lighting problem I was having on a project that had nothing to do with a speaker. Everyone love the DIY build videos, if you want to learn more technical stuff than hit up google, the library, or try your local community college. Love your style, attitude, and video technique. Keep on it brother. Hope to have my own channel someday.