I Got Myself In Too Deep with this Old Boat - DIY Yacht Restoration

In this episode of InTooDeep, I am literally in too deep in my 1968 Hatteras 50' that I bought on its side after Hurricane Ian. Now its a race against time to get the boat back together, in the water, and on the way south before snow flys! Can I do it? Tune in for my most epic restoration video yet, where the old Hatteras gets new running gear, major repairs, and a slew of systems upgrades all in preparation for another season of adventuring! If you like the videos, Hit Subscribe! To Support The Channel - Check Out My Website! www.Intoodeepmerch.com
Instagram@ intoodeepbro
Facebook: / 1306713703180465
#diy #dream #boat
Thank you PropGlide! PropGlide® is a foul-release coating that when applied to your propeller(s) and running gear will increase fuel efficiency and the performance of any vessel. This super slick coating keeps your propellers clean from marine growth for extended periods of time.
www.propglide....

[@jeffr6280]

When you have 88k subscribers and your video gets almost a half million views, it gives you an idea how many folks enjoy watching your work. It just goes to show what a younger person who dedicates him or herself to learn different trades, and who has the drive to work hard, can achieve. It's great to see, and I hope your videos inspire the next generation of potential trades and craftspeople to find people like you to learn from.

[@TheNutzandBoltz]

Well said Sir.

[@yenzen9112]

Too bad you are too busy to post more. This channel is something different is a sea of "will it run" channels. The mix of lifestyle with craftsmanship has potential for a profitable channel.

[@derekkessler7752]

Agree 💯

[@superjetnorcal]

Agree this channel could be huge

[@darrinrobinson4934]

😢😢😢

[@Andrew-hp1yj]

Agree. Record more, post more, make more money. I'm tired of the "lets get it started" videos and nothing else to them.

[@bobhorne8410]

Very true. He isn’t afraid of a challenge.

[@chipmiller9074]

I remember back when you did this how time flies! Your came a long way!! Big 73 ft Traller ❤

[@gilgamarsh]

43:18 Guys like Jay are the true heroes of the world, we're all thankful for them when we're young and hopefully become them when we get older

[@JoeBilello1969]

I've been thinking about doing something like this for the longest time, but being from a fishing village and having spent my life on the water, I know what's involved, you need tremendous resources, tools, the space, the time, the money, the know how, it's endless!!! You have such a leg up on any average person with the connections you have, the average person would be overwhelmed!!!! It costs at least 180 a foot to Moore, pay to take out, pay to put in, pay for shore power, the required equipment to do motors on a craft like that is ridiculous. The regular Joe would have to pay about 7 to 10 grand a year just to own that boat while it sits idle, big nut. I admire you young man, this is hard work and enjoyable as F when its going good, so enjoy it while you're young, healthy and have the energy to do all of this because before you know it you'll start moving slower and get more beat up, this takes a lot out of you 😮

[@alanaszkler1194]

Your passion for this Hatteras 50 and all boats shows. I watched all of the videos. I love this Hattie, all original with the best upgrades. Once I saw the video of the purchase I too would have jumped to buy that Yacht! Updated Engines, AC , auto pilot and all you needed was a lot of hard work and the expensive finishing touches to the shafts, electronics and a few other expensive goodies. The off grid electric system was very smart. If you ever bring her back to NYS Canal stop in Fairport, NY. I'd love to build a permanent roof over the fly bridge with you to hold the Solar panels and catch rain water to up the off grid game.

[@733DMPILOT]

Gus, me and my wife love your videos, and really appreciate your amazing talent and attitude. I will be buying a boat in the next 2 years; I may get in contact with you at some point. Keep them coming!! We call you " the kid".

[@jimboclox2252]

Ha! I call him "The Kid" too. Talented kid.

[@markthomas2436]

He is a hard worker, but he also has some other qualities-- he shows INITIATIVE. Meaning, he is not afraid of taking on tasks where there is a possibility of failure. Also, he is smart and a quick study. Really, I do not know a single 23 year old with as much amp to his game as this guy has. I would bet my condo that he does not do drugs. He has too much drive. Too much ambition. I also predict he will be a well known guy on youtube within a few short years.

[@erypify]

Hey Gus - I'm the guy that bought Quest! Sitting on her in Key Largo right now. Great videos. Look me up if you ever want a ride on Quest again. Craig has my info.

[@tbranch227]

I have so much respect for your experience, talent and will on this project. It's inspirational!

[@ducatiparts966]

you are a MADMAN!!!!!! Your enthusiasm and perseverance are both incredible. IN TOO DEEP doesnt even begin to explain your projects!!!!!

[@ArtThomas31061]

Hi Gus, just ran into your channel “In Too Deep”. The name got my attention and for the last few hours, I just couldn't stop watching and was so touched I wanted say, Thank You! I think somewhere along life’s journey we can identify and that’s where I am now. Sad, I missed you guys in Savannah, Ga, would love to have met you and given a hand. Until keep up the great work. --Art

[@bilgerat711]

From one old boat owner to another...I love the way you are so calm about being in too-deep, know the feeling pushing out dates on the hard-stand and trying to do everything yourself....I am enjoying your you journey and finding some motivation from it

[@retiredfederalie178]

Typical of all haul out projects it never is a long enough time frame. My boat is old, although 20 years newer than Bella, and every time I haul I usually find something like you did with the prop shafts. If you figure a week you need two, or a month you need 2 months. I love the name of your channel it sums up all boat owning!

[@miketee2444]

Many old boats aren't worth saving. I appreciate that you respect what you are dealing with and take it's value and safety seriously. Not sure my priorities were there at your age but at least I kinda always knew. She'll hold value and pay you back for the effort I'm sure.

[@donatoj.caputo4112]

First time watching and I must say, i love to see young people who are into fixing old stuff and not just buying new but, at the same time mixing old and new technology !!!

[@chipmiller9074]

Them cuttlefish bearings had Tobe very tough. Grate job getting passed it Gus congratulations to all your success ❤!!

[@motorv8N]

Awesome channel and great work on the old girl. You’ve got some great skills there. Looking forward to following along. The one thing I’d say being an older fart who has seen some pretty nasty workplace injuries - don’t shortchange yourself on the protective equipment. You’ve got only one set of lungs, eyes, ears, and limbs. Protect yourself and your buddies properly and you won’t be wondering at 50 why you can’t breathe, hear, or see properly. That will seem a long way away to you at your age, but it’s coming. I feel like I was your age just yesterday...Cheers!

[@oliverliddell613]

Hi Gus Came across you by accident. What a lot of knowledge you have for a young guy. I am impressed by your attitude. I hope you continue with your channel but if not I wish you every success in the World. You are a clever, creative young man.

[@nickviner9489]

I was going to make the same post as you have done Well done young man.

[@markclark5688]

Love the boat and your ability to bring her back to life. I have a 1974 Uniflite 42 on Lake of the Ozarks Missouri and I will be bouncing around the Caribbean next season on my Irwin 38 sailboat. Keep doing what you're doing and maybe I will see you out there!!

[@PPC6627]

I'm a 73 yr old greatgrandma. I LOVE YOUR POSTS!!! ❤I have a passion for mechanics, and your channel satisfies that love. I worked for 30 years for Newport News, and then GE turbines manufacturing as a draftsman before CAD. I wish I could do it all over again. THANKS FOR THE VIDEOS! I'll buy some merchandise. 👍

[@ironmule5200]

I've watched every minute of every one of your videos...they all leave me totally speechless! Total admiration for your expertise and your willing less to get "in too deep" and fso! Huge respect!! Can't wait for the next one!

[@danielcrawford587]

Great Job! I was a Engineman 1st class in the US NAVY. I am impressed with your ability and knowledge of the different systems and subsystems. Good job! Or what we say in the service Brovo Zulu.

[@Easterwood67]

So awesome you’re living life to the fullest bud.

[@squeak6773]

Hello Gus happen to find you and spent all morning watching your vids. When we found out you were only 23 yrs.old, we were blown away at the responsibilities you had taken on. We have a 87 412t. AMEROSPORT CHRISCRAFT THAT we picked up a few yrs ago and let me tell you, if there was anybody we would trust sailing her down to Florida, you would be the person we would trust to bring her there. You are extremely gifted with your responsibilities and to see somebody so young and enthusiastic with a passion like yours is something to be celebrated! We love your videos and the work you've put into them! Love the music as well. Hope to follow you on more of your adventures. The Bella Rose ahhhh a classic so happy to see that you brought her back!👍👏👏👏👏 love from Ontario 🇨🇦!

[@craigsenior6190]

Cause you are fulfilling my dreams and I am 75 years. Old so keep up the good work god bless❤

[@jamesr.epstein]

like catface, I'm 81 and keeping up with my 67 Glasspar . i've also owned for 11 years a 65 Owens Contessa. Total restoration on that boat that I truly miss. Keep up the great video's.

[@dougshirley3460]

The joys of a major refit. I have a 1996 Albin 32+2 that was mothballed and put into storage early 2007. All systems were working at the time of mothballing however I hate to imagine what it needs now. Topsides and hull have cleaned up very nicely with first a strong dishwashng liquid followed by a bleach/water 1-1 combo to to kill off any remaining organic growth on gelcoat. Worked well. Just completed the hull today with 3M cleaner wax. Remarkable comeback. Do it again with Mequires Flagship and it will almost look like factory. The interior will be another story. Engine should come out also for a thorough going over.

[@FREEDOM195844]

Please wear protective gear when working with fiberglass and all those chemicals! Great video with all your hard work. I had a 42' 1974 Hatteras Sportfish and the boat was built like a Sherman tank. Many boats that fall over during a hurricane would be totalled. This is a tribute to how well Hatteras made their yachts! I've tried prop speed and many other methods and it all comes off if you run the boat long distances.

[@5ShotProductions]

Hi Gus, I just found your channel two or three days ago, the first part of your journey video (Miami to Maine) randomly showed up in my YT feed, so I clicked on it, watched both episodes in a row and just right now finished watching this video. And I have to say it: Man, those three videos were a pleasure to watch! 🙏 I do have the utmost respect for all the blood, work, sweat and money you put into making Bella pretty again, and it pays off big time in my opinion. You know, I‘ve never been into the maritime world at all, I‘ve done a few short vacation boat trips with my parents (we chartered a 52ft MY for 10 days, back in 2010, 2011 and 2012) and for sure, it was a blast. But since then I‘ve had nothing to do with boats or boating. But I really can appreciate and respect the passion you do have for boats and for especially for Bella. 😍 A BEAUTIFUL ship ❤️❤️❤️, I really like the look of her and I would have never ever guessed her age by the first shots I saw from her. She aged really well 🥴🙏 I definitely will enjoy the other videos of her and you so I‘m really glad and happy to have found your channel, I subscribed immediately after the first „Miami to Maine video“. All the best to you and Bella, I‘m really looking forward to watch the next episode about you and your beautiful MY Bella 🙏 With best wishes from Germany 🇩🇪, Philipp 👋 EDIT: I do hope my English „skills“ were good enough to let you understand what I tried to write in this comment 🥴🫣😀

[@jtcrowder49]

Same here!

[@pduderocker]

Such a nice and thoughtful comment. Thank you for posting this for all to read. So well written, simply awesome.

[@saenole66]

Love thre trip Miami (my home town) to Maine. What a great trip.

[@houstontexas4658]

Gus, it's so fun watching a young guy going after what he wants...keep the vids coming! Bella Rose is looking my-T-fyne!

[@gblakev]

Like reading good book I couldn't take a rest. I can't believe I watched the whole video in one sitting. So much progress on the renovations and repairs. I can't wait for the video(s) about the trip south.

[@williamtalmage8076]

Just watched the whole video....I'm exhausted! Love the trick putting the bearing in the toaster oven and the nitrogen from the canned air container.

[@4snowdog]

She is one beautiful boat. Your doing a great job. Thank you for saving her. Best Wishes!

[@williammichels4464]

I’m 26 and almost done redoing my 42 commander right now, cool to see others doing the same

[@NicolaMs007]

Bella Rose has some beautiful lines on her, lovely name for an old lady, and she has some speed to her with her new running gear, wow really loved what you done to her in getting her ship shape again

[@rustysteel8714]

Your DETERMINATION in the face of adversity is beyond compare, Gus! The ingenuity to repair the running gear ...AWESOME! 💪 You're an inspiration to all of us! 🛟 Old guy approves. 👏🍻⚓️

[@hellodarren]

Great video as usual! Looking forward to the next one, stay safe out there!

[@chriscarlcm]

Whoever ends up with a boat that you've owned is a very lucky person! The amount and quality of work you do is incredible.

[@joemair4179]

You're a veteran buddy.. great to listen and watch ch while works ng on my 78 42' unflite sportfisher. . You carry a great attitude. Thank you 😁

[@linsayhenry920]

I applaud a bloke with your skills and obviously some money. Don't stop videos and any redesigning you do if it is not patented make sure you take out a pattern on your new designs.

[@jerylabrams8408]

Hey Gus, miss you, she a big girl and your boat projects are plentiful, she is amazing and will amazingly a Hatteras! Checking out the merch, lots of luck and keep us up on the refit😎👍

[@endlesssummer426]

The list of things you were able to do is longer than the list of things I plan to do in 3 years time. You did it in less than 2 months. I have no clue where you get the energy and the knowledge, but it is freaking awesome ! 👍

[@deej9367]

The money. So much

[@karaDee2363]

No doubt you've been one busy man. That prank throwing a body in the dumpster was hilarious. LOL and I know from experience there's never a dull moment when traveling by boat, which is all good because you'll have a lifetime of memories

[@Markb8608]

the gift of desperation yields ingenuity, My dad and I built a 55' sailboat in 198o out of steel. His wife sold it after he died. Lost track of it. You have enough mechanical sense not to destroy your boat. It looks it had safety pins in it. The alignment is real tough. Sometimes what seems to be tragedy works out to be a gift.

[@hookednrolling2009]

Gus, all the rust stains you can get bc rid of it with pool acid aka Muriatic acid great job on the glass work. Im getting every thing ready to do my transom on my 82Wellcraft Sportsman 248 with my08 Evinrude 300 etec

[@harryfatcat]

Amazing, I'm exhausted just watching the video!

[@bimodo1472]

Yeah, Break Out Another Thousand, aka BOAT… but you are doing marvellous. Nice to see that yacht come back to life. Cannot wait to see your journey back to Florida.

[@HOSTARMARINE]

Looking great Gus! Nice work. Kip at South Port is a very close customer of ours. My company manufactured the self-propelled boat handler that hauled the Bella Rose out of the water! Glad it handled her well!! Keep up the good work!! Dwight

[@humblestever24]

Great job. Right up to specification limit and handled it easily. Quality workmanship. Disclaimer: No financial connection :))

[@staggerinstanton56]

Gus, im still amazed at the amount of skills you possess. I myself consider myself versed in many different skills, ours are much different though. I really hope to see the Bella Rose back on the water. She's a beautiful vessel, and you just make such great videos. I really appreciate your hard work ethic it's something that's lacking in a lot of younger people these days. I wish you flat seas

[@sylvandespres7654]

Hey!! woaw.i'm not even a boater,and i'm captivated by your channel and your skills applied to fixing boats like that. that is an amazing channel.

[@born2soon]

My head is spinning with all the projects you have to do on this boat and your initiative to get them complete!

[@imkwuzn]

I absolutely love your videos. Your depth of knowledge, talent and ingenuity combined with your work ethic and sense of humor are a joy to watch. Bella Rose is beautiful and I can’t wait for the next video of your trip down South!

[@marcusleather1329]

Really great to see you back. Just wish you could do more video. But I do understand.

[@Rev1Kev]

What a summer of work, can’t wait to come along on the journey south

[@dmillion4527]

Great video Gus, amazing how much stuff you get done in so little time. Looking forward to part two, should be amazing!! Thanks for sharing!!!

[@michealarburn9861]

The video's of you and your buddy's on the boat having a good time are soooo much more awesome when someone watches the amount of work you put in to be able to do so!!! You are freaking awesome my guy!!

[@pokechopachunky2905]

I love your channel Gus. I have watched every video multiple times. Intoodeep is the best channel on KZbin

[@fposmith]

Now you need to re-target that Port shaft ! I worked with lasers in construction for years before they were used in marine applications. Namely, targeting shafts. I had just started working for Derecktor Marine, It was called Derecktor Gunnell back then. When they sent me to the next yard over (Lauderdale Prop) to show them how to set up and target shafts and cutlass bearings using a laser. Like everyone else at the time, they were still using the old Piano Wire method ! That was in 1984.

[@ichbineinegluhbirne4141]

This is the type of guy who will not cut corners regardless of timeline or money. If this yacht ever goes for sale, someone will be getting a very great deal. Nice work, dude. I can't stop watching your vids lol

[@stevem8112]

Dude, you are the Michaelangelo of fiberglass. Much respect to your abilities, perseverance, patience, imagination, just remarkable.

[@moodiblues2]

My friend, your channel is properly titled. I remember a little about the type of boat you have. It’s a multimillionaire’s personal boat. Not his yacht. This is the one he captains himself with little to no staff. This is the kind of boat that was more personal. His yacht was for more formal situations and was totally staffed. The owner did nothing on his yacht, but as much as he could on his little 50 ft Hatteras. My father had a very nice 33 ft Chris Craft and he was a physician. The 33 was all a physician back in the sixties could reasonably afford. My father wanted a Hatteras, but…So you have taken on a boat that takes the pocket book of a millionaire.

[@hankystang1]

Thank you. Amazing posts. Unbelievable work ethic. Stay healthy.

[@catface3473]

I.m 70..keeping up with my 50 year old searay is about all i can do..great job..bravo..i look at fantastic sometimes free projects and just have to keep walking..good luck captain !

[@wcguthrie]

Wow, I'm actually exhausted by all the work you did young man. Great video!

[@TheKelvala]

You have an amazing talent. You are a true artist. I am really enjoying these videos.

[@theoreinecke4867]

Well done I am impressed with your accomplishments you are a warrior

[@rogerroger7734]

I live about 3 miles from Wayne Beal. That thing was modified on the bow and the house. They are good work boats for sure.

[@brandonmcnaueal26]

Gus! Found your channel just recently and I’m getting caught up on all your endeavours and I’m absolutely blown away with your skill set at 23-24 years old it’s unbelievable. I’m 48 and I’m am very skilled at a lot of things but my man you got me beat in spades! You my friend are an incredible young man! I’ll be supporting all of your videos!

[@VooDooV6]

The whole time I was thinking to use the shaft to align it up..but I know jack sheet about boats..keep up the great work,when all is said and done you will be a master seaman,really love the drone footage

[@mrm4400]

SO happy to see you and your boat again and once again...a FABULOUS video. Cannot wait for the next one. Best wishes from Cape Town.🛥🎉

[@andyg6312]

Quite an undertaking but doable. Being a prairie dweller I sure miss the boating and open water. Keep up the videos.

[@davidh7142]

Much respect for your skills, you gonna have a nice home forever

[@daddski1]

Wanted to tell you, your shafts are not bad friend. As long as the pits are not on a surface that a seal runs on they are completely saveable. The things can be welded and returned or if you are good, ground and sanded back smooth. It depends on skill levels and you did fantastic on the glass work so you could save a lot of cash. (my experience?) 10 years navy followed by 50 years of marine shop owner and repairman.

[@Schieff4455]

Gus, another great video. Wow, you did a LOT of rehab on Bella Rose. Those are incredibly long prop shafts! Great work getting 55-year old cutlass bearings and other running gear out and reinstalled. Really fun to share your adventure, setbacks, progress and hard work.

[@GlendaMixer-jz7vc]

The ability to make things work when others would give up. Love this video. The best repair boot video.

[@sandman4384]

first time watching love it you are good at what you do i will be watching thanks most interesting

[@thebigguy8306]

Thank you Gus for sharing your journey. You are an Amazing young man. Safe and healthy travels Working for a marina a great Idea. I worked part-time at a car dealership, lots of work on my car

[@Jeffrose_]

I know it's hard to make money and make videos but I wait as patiently as I can because I love your videos. You deserve all the good things in life. See you on the next one.

[@scottcol23]

Im so happy for you! Bella Rose looks fantastic. I hope you are proud of what you have accomplished. Because although you make it look easy.. It is the exact opposite haha. Many years from now you will look back on these videos and smile ear to ear. I am 41 and wish that I had filmed my big projects from my 20's. Keep up the great work. A little advice. Try to keep up with 2 videos a month and before you know it you will be getting that Play button!

[@reggiefenner8646]

Simply WOW!!!

[@liamegan4303]

Hello Gus from Ireland again lol. Wow long time sinse we have Heard anything from you lol. But it's so Great too have you back. It's Great to see the Boat out of the Water, It will look great with abit of Love and a good Scrubbing 😅. It's a Shame about the Shaft, expensive, I hope they pay well at that boat yard lol, Joke Gus. I hope a Month will get everything done. Good luck Pal 😅 🇨🇮

[@danieldejarnette1319]

Can't get enough of these videos inspired to go and grind for what I want your smart as hell

[@johnnym7904]

thats gotta feel good knowing all that running gear has been gone through! maybe a little less stress when motoring. got huge respect for you and your knowledge, and when to use friends who know what the fuck they are doing!!!! thanks Gus!!!!!!!!!!

[@Adam-en4zm]

Wow mad respect man, I thought I was insane for buying a 41' 1972 Concorde motor yacht and fixing it up, but you went in even deeper. Your skills are insane, I one day hope to get up to half the adventures you have! Cheers from Canada

[@EternallyUnhappy]

How awesome you had a travel buddy/boat for the trip back, Can't wait for that video

[@mb56436]

Another great video, Gus! Thanks for sharing! You should Be really proud of yourself with all your accomplishments! You take “Messing about on boats” to another level Very much looking forward to your next video as always! Matt

[@tomsmithlydiaalexander2519]

So now having seen most of the restoration vid… I’m hoping for a bit smaller project myself. I was a career chemistry and trade school instructor until I retired three years ago.. before the demise of the family farm (VT /NH) I saw farm kids with huge range of skills and ambition… but very few in the general population . You are very talented and skilled…and have a hell of a positive attitude…. Keep on keep in’ on

[@MrJerobona]

Great to see you again! Wonderful work! Congratulations!

[@mikeneumann4660]

The level of respect I have for you words cannot describe.

[@samuelshearer8686]

I’ve worked a couple years in the yachting industry and we usually paint that green stuff on the shaft. You should look into doing that.

[@johnfisher7143]

I’m glad it was you doing those fiberglass repairs, my skin started itching all over just watching 😂

[@toddr2265]

Great work Gus. You’re an inspiration. Bella Rose is looking great

[@robertbodell7221]

Bringa back memories. When I was 12 I talked a marina into paying %500 for a storage tiyle on a 25 foot cabin cuiser with a blown engine and had been sunk. They also gave me two weeks to work ok it and a free launch. I anchored it out on bunch of engine blocks, left home and moved in and never looked back. I did odd jobs on boats moast of my life although I seemed to have a callling for delivering sailboats without engines. One yach broker bought pieces of shyt and said here bobby, get her ready for sale. I never got past the 6th grade so I figured that if people were turning their 200 and 300K boats 0over to me with a 6th grade education, I must have something going and just never stopped. I am SO GLAD that shyt is over. Id fix one boat up and they would launch it and give ,me anothjer piece of shyt to fix up. Thgse days were pretty cool. I had a sailboat so if somebody paid me enouigh to stop sailing for a while, I would and I really liked sailing over being shoulder deep in bilge shyt or covered in bottom paint. I never considered myself rich but if I wanted an outboard motor or another boat I baught5 it. I spent moast of my working life sailing around south America because it was harder to find me.

[@patchmack4469]

hey Gus, i don't mind the videos being few and far between, they are really worth it great to see you hard it (and working) in another yard, makes you a sort after kind of guy, and useful to have around, and means you must be welcome back any time you visit, earn your keep at the same time, and networking as you suggest, is always a very useful thing to do that trailer hauling your boat out, a crazy thing, what's the engine on that, looks small but powerful to lift the boat up a slope, very neatly done anyway i was going to suggest an air chisel for the cutless bearings, but your all over it, what a man, and great work on the forward one, that's a stubborn mother FR, personally i might have sacrificed the fibreglass and renewed anyways, but again, 10 out to 10 for perseverance and strategy and being the man you are 'in so deep baby' i thought perhaps if you had the shafts you might have refitted at both ends, with the two cutless fitted, the third (forward) one on the shaft at the correct length and simply fibre glassed in place

[@deeman77777]

Gus!! I just had to comment to say how much I admire you. I am most impressed with your vocabulary, lol. You know the term for every single item on the boat "shaft log tubes" and so on. I am learning a TON just based on your casual conversation explaining what every component is and what it does. Me thinks your an incredible smart, high IQ dude with your vocab. I am just devouring your content and learning a ton. I hope you inspire other young people to ditch the grind and being glued to a phone and get out there to push themselves and enjoy experiences just like you are. Anyway, stay humble and continue to be a great guy!!

[@johnhamilton9229]

Wild ride Gus. Hold on tight and enjoy the ride

[@JohnSmith-lj9dg]

Dude, you are amazing and so young! You have a real future in this industry. Stay on coarse.

[@thecroftericmiller496]

Loving these laundered and detailed videos Please keep creating and sharing

[@MakerNoKY]

New subscriber here. Watching these older videos. You must do great work. Those guys at the marina have respect for you and clearly want to help. No doubt that comes from your attitude and work ethic you put forth and the respect you show them.

[@bats_5]

Well said as I fit under your same situation. This channel def has grown to 1 of my favorites