I'm really excited for these - Solink budget brushless motor and improved gears!

[@jhqtech]

So I’m interested in the solink motors with the single direction bearing. But if there’s no arl then what happens when the motor is pulled out? Wouldn’t the gears spin backwards possibly damaging the rear of the piston? Also, if the entire gear train is being held by just the bearing in the motor tower, how much stress can it really take? I can’t see a bearing alone supporting the force of a high power spring like a m160. And if that bearing fails wouldn’t you need to replace the whole motor? Thanks for the advice!

[@wyz2285]

The axis of the motor is the best place to brake as it has the lowest torque/stress applied. You do need to mind to remove the precock before removing the motor or remove the main spring (which is what I do, all my aegs allows me to remove the main spring before having to remove the motor)

[@jhqtech]

@@wyz2285 ah I see. Removing the main spring would certainly solve that problem. Unfortunately not all gearboxes are quick change or quick change enough to remove the main spring without removing the motor first. But even without precocking, most etus cycle detection stops the sector so that it slightly picks up the piston meaning it would always be under some load unless the main spring is removed right?

[@wyz2285]

@@jhqtech I can't think of an AEG (that's worth dropping in a brushless) that needs motor removal, also these motors has built in active brake. Anyway, if you have an old AEG without QD spring, just use their cheapest brushless without the anti-reversal.

[@FrozenByFire3]

​@@wyz2285 Krytac are arguably the best AEGs out there. Don't have a quick change from the buffer tube. G&G and VFC also don't have this for like 99% of their guns. The guns with actual QC springs from the buffer are actually pretty shit like Cyma, Specna, Arcturus, etc. So actuslly the good AEGs dont have it

[@asheleydavies]

Just got their 39k brushless. And it really tranformed my aeg, with 13:1 gears the trigger response is immediate with no precocking. And the rps is about 35. Insane.

[@drewmurray6480]

What are your thoughts on infinity brushless motors

[@wyz2285]

Should be about the same as T238, they are from the same OEM.

[@--lg9swrgyert]

Does removing the ARL make the gun quieter?

[@wyz2285]

A little bit

[@T238dotnet]

Hi, interested in doing a review on t238 blue brushless motor?

[@ikharus1]

any ideas if such a beast would work on my Hera Arms CQR (which i transformed into a DMR, i'm using an m40 spring) ? the computer inside is SSS 2, it has precocking and theres no way to deactivate it i think.

[@wyz2285]

It will work, the SSS2 isn't an issue.

[@ikharus1]

@@wyz2285 ok cool, thank you

[@HikiZIMA]

Is the SHS motors better or solink.

[@wyz2285]

The genuine SHS were OEMed by Solink

[@DrDuck7700]

Release date?

[@wyz2285]

Already out on their website.

[@DrDuck7700]

@@wyz2285 Appreciate it. Loved the vid, Just found ur channel and subd.