I Made Bicycle From 3D Pen (and it works!)

Challenge accepted is a channel about challenges and new trendy stuff on KZbin. DIY, tips and tricks, myth busting - subscribe for more and feel free to write your ideas below the videos.
We always welcome for a fresh ideas and glad to see you here!

[@tcgfant]

Why do i feel this would be more expensive than buying a bike?

[@carlyyiannou8833]

Totally agree!

[@loser6972]

Film isn’t too expensive actually ( coming from another 3d pen beginner ) it’s really cheap on amazon and such! But it would take a ton of time.

[@tcgfant]

@@loser6972 Oh. I always thought it would be kind of expensive.

[@loser6972]

Mystipig _ nah not really, look it up. Some big packs cost a lot tho, around 10 to 20 dollars American but Canadian is like 40 dollars. ( I’m Canadian. ) sooo yeah

[@theevilpleb9719]

@@loser6972thats not that cheap is your using it alot

[@erenozturk9402]

“Oh for me?” Then she sits on it and the whole thing snaps in half

[@hectorramos7725]

Lmao I said said the same thing.

[@pumpkineater69seven17]

Exactly what it would do if I sat on it and just before I ride off for my big rehearsal darn you plastic bike,my fat ass and mass,gravity force. Lol.

[@yassinkhadraoui5894]

They broke up after

[@Matthewmoo32]

Well they ended the clip early so it probably broke

[@chickencurry7642]

@@yassinkhadraoui5894 the bicycle broke before they did lol

[@ZOMBIEZAHNpakuto]

I want to see her actually driving around - I can't believe a 3d pen bike can support an adult' s weight tbh... Awesome work though!

[@zuul2591]

My guess is that it broke the moment it had to bear weight. Or that the pedals stripped or that the pulley belt wasn't tight enough . . . or all of the above. If it had worked, she would have put her driving around in the video.

[@samanthawit4348]

If you look closely at the end she didn't put all the weight on the bike. One of her feet was walking on the ground

[@pigeontoast6727]

I wish there as a thick enough filament to hold an adult’s weight. That would be awesome!

[@Lollee28]

It would probably have to be a lot thicker with the material used but it might hold someone with anorexia

[@rome.u]

It will work but for a short period of time, because of her weught and also they use garter

[@zigzag_gaming139]

I am getting troom troom vibes

[@macadelic8923]

More like flashbacks. I think their finally dead😌

[@GeneralTale1110]

Rest in peace troom troom i always liked the funny videos

[@kathryn4160]

I thought it was a troom troom video at first

[@kenneith312]

Me too

[@sledge1693]

Same

[@drpunking4766]

If only the filament was stronger imagine the possibilities.

[@ssoforlife]

abs is stronger than PLA, which is probably what they used, so yes it can be stronger

[@Drewheeler]

This feels like an artist pretending to be a mechanical engineer and failing/lying about it.

[@margauxbrisson2495]

true

[@dineshjoshi1681]

Wow

[@andreacoones1587]

I bet it cost more to make that bike out of this then just buying an actual bike lol That aside this is super cool and fun to watch. Nicely done!

[@SaDFTV]

Did nobody else notice how when she started turning the pedal her right foot was still on the ground and the rubber band chain never actually turned😂😂

[@livaanabdulla7338]

AGAN NOT UOY

[@dineshisharma2848]

You are right😂😂

[@asmitachakraborty2698]

Yesss you're right👍👍🤣🤣

[@carolinejarvis2080]

Alright actually it could break at any point so that comment I just put them up on he is right👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🏼👍🏼👍🏼👍🏼👍🏼👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻

[@rnangar4788]

Seller of the Filament be like: Yep She's trying to craft the sky.

[@PowWowAnimations]

Even though it definitely can’t be used, it’s a pretty cool and unique display piece.

[@ggagaaga7316]

It could if u were 50 lbs

[@xxstranger._.thingsxx1303]

It can be used u would have to be light so you don't snap it the wheels spin because we saw that and it even holds her weight a small bit it might work

[@xxstranger._.thingsxx1303]

@TBB747 maybe if she makes it more stable and ads more to it

[@محمودالمصرى-ن7ش]

بقم

[@kurisurisuku]

Nice

[@LuisCederborgDesign]

I am curious about how much time and filament went into building this

[@bethgrinnell1164]

Oh yeah? Let me see you ride it. 😂😂

[@denizlehmann6757]

"it works" camera doesnt ahow how she is fully riding it

[@priyankak9454]

It works only when the camera is turned off 😂

[@polinlinnnn]

Mhm

[@ABitOfMemes]

ahow

[@cuphead7061]

You need a extra iq

[@Create_new__handle]

doesnt

[@YourGoodLuck..]

0:08 she doesnt have money for buying cycle but she have money for making cycle from 3D pen LOL

[@l.ramarao8407]

Yes correct the 3d pen sticks are costly then the cycle because she use many sticks

[@yyabay]

@4:37 before it breaks video ends.

[@pastoryoda2789]

Yağmur Bayrakdarlar lmao 😂😂😂😂

[@samanthawit4348]

She didn't even ride it therefore it never broke. You can see her foot on the other side of the bike stay on the ground

[@divine308]

PLA isnt that weak you would be suprised

[@Swyzz7]

REALLY?!?! REALLY?!?! ARE YOU SURE YOU CAN RIDE IT?!!! 4:35

[@hyunjineom6034]

I want to see her riding the bike

[@dusty6964]

on the swiss alps...dowhill...

[@somenoobanimeguy7480]

Me too

[@noufalnishath1937]

That wont happen 😂

[@Create_new__handle]

the bike dont work!

[@hyperhektor7733]

naked??

[@ambreenbilal1412]

Some times I think making it is more difficult and expensive than actually buying it

[@istp1967]

How filament went into that?? 😂😂😂 Right, I'm gonna draw a house 😆

[@izziebeabea]

Lmao if you have like 7000000 filaments you could probably make the hype house

[@bluelight7official]

@@izziebeabea how could you count filaments

[@Spike-Spi3gel]

@@bluelight7official you just count them in spools not kg😁

[@eamonlee159]

The drivetrain on the wrong side triggers me

[@jpx2133]

That's not gonna last long at all Now that I think about it that's probably why the camera pointed towards the road

[@SidStudios-]

Omg- imagine how long it took to make this and it still didn’t work

[@helloguys5365]

Me:mom I want a bicycle Mom:we have a bicycle at home The bicycle at home:

[@DawsonsMemes]

Filliment prices probably cost the same as the real bike

[@Jack-kz5fy]

Bike definitely broke at the end of the video that’s why we couldn’t see her riding it 😂😂

[@klaasj7808]

Sure she can ride something else

[@kakusandu4587]

@@klaasj7808 y0uuuuu,,,

[@moonfluff459]

*Me sitting here thinking this was clickbait*

[@It_Is_Oylenox]

Just thinking here, it was probably still expensive to get all the plastic stuff 😂

[@o_o............]

@@amethyst1885 yes, but 3d pen aren't that cheap...

[@o_o............]

@@amethyst1885 Mmm... I don’t know, you and your weird coins confuse me...

[@o_o............]

@@amethyst1885 yes, like me.

[@kathryn4160]

Haha yeah

[@jennatoolsarenice2978]

Your arguing about god damn plastic 😑

[@tiobiovr]

Mom i want a mountainbike Mom: We already have a mountainbike The bike:

[@fairymairah]

So creative I want to see her actually Ride it 🎨🖌✒🚴‍♀️ !

[@mycreations4527]

It’s not gonna work! If you even try to write that thing it’s gonna snap straight and a half most bikes are made from metal Metal can actually support someone’s weight plastic not so much

[@iampototo2540]

This ideas probably more expensive than the actual bike

[@notsam498]

its cool from an art perspective but i see a lot of stuff like this that is almost deceptive. that bikes doesn't work functionally and you'd be insane to try it.

[@domz7_]

I can just imagine the seat breaking off while riding lol

[@zayne16]

It’s all fun and games until the forks snap out of frame.

[@mathewskmangat6378]

I too feels like its too shiny and i love it very very much

[@killallkarens6847]

Click bait

[@seanrizzle]

Guaranteed they just used a normal 3D printer and just coated it with a 3D pen, otherwise this would have taken months

[@dontbeakaren9059]

Straight as i saw this it was fake. I already knew

[@zakiraversi3983]

yh it will break

[@taju3d374]

Klicked because I wanted to watch you ride it, but stayed to watch the whole process anyways. Nice work.

[@folzitz6137]

This is how many packages of filament she had to buy | | |

[@TheG96]

Wish you all have fun watching videos and have a good time I made a video on the theme of cardboard that people came to watch and gave me more power to make the next video

[@JulianTrainKidProductions]

“and it works!” *bike breaks as soon as she gets on*

[@elsiefoster9987]

All of the plastic in total would probably cost more than the bike anyways

[@obsidian4900]

Am i the only one who is thinking how much did the filament cost

[@virxtigo]

NinjaSlayer it normally costs like 10 pounds per roll depending on which diameter it is so that bike would probably be over 100 pounds on estimate

[@tofluffybunny6780]

It just depends on how much they use and depends on where you live because it may cost a lot where you live but it may cost less somewhere else

[@ara.genova]

“Aw shucks! I’ve got no money for a bike😞” “mAKe ONe🤠🖊”

[@josephchacha9871]

The probability that the bike collapsed when she started riding is 1 😊

[@gellona90]

Joseph Chacha more like 1000000

[@wrldondrugz666]

dude just casually said I made a bike from a pen

[@skygamer3440]

i legit thought he was going to make a barbie bike

[@kyler8881]

it doesnt work, yep maybe she falls when she turns because she has no rubber in her wheels. ://

[@StanQA]

Looks like it' s cheaper to buy a bike rather than buying so much rod for 3d pen)

[@hagki]

4:36 must be broken 😂

[@Manyaa2810]

Hey everyone I wanted to say you all that if you can't do good comment so please don't comment don't make anyone feel sad she had made the video with so many hopes please don't make her hopeless 🙏🙏please it's a request for everyone who is giving bad comments

[@tzeemi3211]

She: Makes it all by herself Also she: "Oh, for me?

[@Kubafalkowski97]

Stupid x2 😂😂

[@daniellafferety4025]

Possibly it was a plastic shooting device u remember. But it did the exact same thing. Just with black plastic.

[@crispychris8399]

THIS IS AMAZING!

[@reshmar7896]

Please make a video of making badminton bat andcork

[@narutogaming705]

She can't afford a bike but she can buy this much filaments

[@atorastars7445]

كم عربي هنا لو بس انا ؟

[@yazihanjusoh6175]

At the end . I want to see her ride it . but insted i think they cut the scen before the thing broke hahaha 👇

[@masterwolff4378]

Dont have a bike? Life hack: Buy $10,000 worth of blue plastic and make your own :D (Power drill, ruler, paper, and people not included)

[@ognoskin_866]

1like = 1 km filiament 😂

[@shahnawaz_shaikh97]

Bro now you have 3like = 3km filiament

[@grshift]

13 likes 13km filiament thats alots of damage🤣

[@bluelight7official]

17 Kilometers AKA 17,000 Meters AKA 1,700,000 Centimeters AKA 17,000,000 Milimeters of filament

[@daplaguedoctor7487]

They didint have enough for a money bike but they have enough money for a 3d pen ammo

[@valsala487]

She is tallented..I admire it..🥰

[@nicoletigress2152]

this looks like a huge byscle minecraft build

[@arjun_s_001]

It would melt if you ride in the hot sun🌞😂😂

[@everything_blue3662]

Wow that's really amazing can you make it for me can you make Barbie doll from this 3D doodler pen with dresses are you can also make accessories in your next video plzzzzzzzzzzzzzzzzzzzzzzzzzzzz

[@prasanthvk1105]

ഓ പിന്നെ ഞങ്ങൾക്ക് തോന്നുമ്പ ഉണ്ടാക്കിത്തരാൻ ഞങ്ങൾക്ക് വട്ടല്ലെ🤬🤬

[@artshurin]

это самая лучшая реклама 3д ручки. нет любого подобного продукта для творчества который я когда либо видел :3 я просто куплю это и все 3

[@imapenguin591]

No money for bike but an awesome pc I think that pc is built by 3d pen

[@jethro2521]

Will yall stop hating she just wanted a craft that was fun

[@nathanielthomas4437]

No way that thing supported the weight of a human being. Still really cool though.

[@aniazaw6379]

Wow The bike is AWSOME!

[@KarthuOfficial442]

I appreciate you guys because to make bicycle with 3d pen, it take lot of time to make the body parts of the bicycle....

[@anuradhapai5012]

This girl : OMG it's a bicycle!!! Harry Styles : orr iss ittt?

[@commenty6233]

The textures are missing all over this bike SEE WE LIVE IN A SIMULATION AND I KNEW IT ALL ALONG

[@serolam]

buying all the materials should be more expensive than actually getting the bike...

[@yourfriendami]

suzannae larend Filament is actually quite cheap on Amazon, and especially for only one color. I think a big roll was around 10-20 usd. We aren’t sure how much he used, though.

[@alecs.23]

I think that the filament would cost more than that bike... but good job

[@ShadoSlayor]

Tbh the music kinda sounds like Rick astleys never gonna give you up... Because it's a COMPLETE JOKE

[@dynamictalenthunt6758]

She doesn’t have money to buy a normal cycle but have money to buy this expensive stuff

[@HarmandKeaVLOGS]

I honestly think this is pretty cool

[@spacerock5455]

I bet that cost more money than a real bike because Plastic cost quite a bit of money

[@naughtygamers3364]

Make a car with 3d pen

[@GOMANGO-p4j]

That’s a lot of string usage…. That’s still money right there for the string…..

[@uwaisyusuf3186]

Challenge accepted:doesn't have any money Also challenge accepted: fine,i'll make it myself

[@dennisshaw4161]

Who wants them to make a whole car 👇

[@ime9669]

How about make a mini house out of that awsome pen lol

[@JaffeLing]

it's a beautiful 3d bike, but definitely it will collapse with your weight, even a kid

[@jeanstv1852]

Wasi Karan:- This is beyond science

[@macer4640]

wow the practise test was definitly 100% legit. Just look how lose that rubber band is. And it's not intended that the camera moves away. Also you can even see the feet on the ground that is moving the bike foreward. OOF

[@trumanbuller8256]

4:36 -annnnd then she fell

[@1985karatekid]

I feel like when I’m riding this bike it’s gonna break

[@SkAzUtONaGaSaKi]

Lots of filament and time.. It look cool but won't hold long.. The melted filament turn harder than the original one... I made some smaller 3d items, its quite durable

[@domeyjofficial]

Making some lamborghini aventador over 48 hours for making

[@sunitagupta7653]

Nice cycle

[@bhupeshsahu8117]

This would most expensive than a bike

[@mycreations4527]

Amazing work but you basically just made a prop

[@penguin3864]

Instead pays the same amount of money on filament and a pen

[@al-aswadhajj-umrah4793]

Doesn't have money to buy a bicycle but has a Mac wonderful

[@manashiamita1898]

OMG What a talented person made a bicycle with 3d pen 🤔🤔😨😨

[@shellysmalley5921]

A this would cost more than a bike B highly doubtful she's a engineer C I wanna see you ride it 2 ft. D lies.

[@soyabeanrenaissan6151]

Lol point A is exactly what I thought and, it makes her acting pointless. And let alone riding, one step on the pedal and she's sitting on the road duh.

[@jakovdavchevski5218]

0:18 she can't afford a bike, but she can afford a Apple Computer. No hate though love the video

[@quigonjinn.]

It can’t hold her weight it’s fake it didn’t even show here riding it.

[@jenniferdas8338]

Why do I feel this would be more expensive than buying a biycycle

[@TheG96]

Wish you all have fun watching videos and have a good time I made a video on the theme of cardboard that people came to watch and gave me more power to make the next video