I Made Lego Pieces Fly!

[@RC.Bricks]

The gear ratio of one pair of gears is 1:5, and 5x5x5 is 125, so the ratio is 1:125. It looked like you were spinning it at about 2 times a second at top speed, or 120 rpm, so the speed on the propeller is about 15,000 rpm, or 250 rotations per second!

[@cindyisamazing]

6 likes and 0 comments? Let me fix that

[@GggGgg-nc8fo]

Nerd

[@GggGgg-nc8fo]

Lol

[@Blocks1400]

@@GggGgg-nc8fo he's not, he's just better student than you. LOL

[@Brick-dx3lw]

@@Blocks1400agreed

[@nikolasproctor7061]

I work at an aviation museum and something a lot of people don’t understand is that a 4 bladed propeller actually has more drag than a 3 bladed propeller so the thrust benefit is outweighed by the drag unless you have it going at very high rpm.

[@LachlanHoran-xw7qz]

2:02 the gear speed is 18 times faster than rotating the handle

[@RC.Bricks]

I disagree because 5x5x5 is 125, meaning it would be 125 times faster, but if I’m wrong let me know.

[@LachlanHoran-xw7qz]

@@RC.Bricks I remember hearing early in the video he said 6 times faster

[@RC.Bricks]

@@LachlanHoran-xw7qz if he did it would be 216 times faster, for gear ratios it would be 6x6x6 not 6x3, it’s a little complicated, and 40/8 is 5 so it is 1:5, I think

[@BrannonAerospace]

Regarding the rather large prop, you could fix the skipping problem by adding one or two more 24 tooth gears on top of the first one. This should allow it to raise the axel out of the bar while still being powered, and then actually fly.

[@iamactuallyoreoboreo]

airjistzu ripcord, used it when i built beyblades

[@DavidOglesby-f7v]

if you use 2 gears on top of each other and another set of gears stacked it gives it more Tork solving your problem pf harder to crank.

[@rc-fannl7364]

Lego pieces can also make people fly, when they step on one

[@qmml]

In my basement😃

[@theconsoleinthecloset]

No, It won't make you fly

[@mistercat739]

Lol

[@tr2k500]

most likely will make you trip and fall

[@Machironi_22]

I love the Airjitzu sets. My friend had the Morro one back in 2015 and just recently I got pieces to rebuild my Kai one. Update: pieces shipped and now I can’t put down the flyer

[@qwertyjeffMC]

For the rip coord I don't think there are any but ik that in set 42152 it has a mechanism that might work

[@Attemptedburger]

The issue you're facing is that the lift you're getting is causing the gears to keep disengaging, so the propeller slows down, losing lift and dropping the propeller back down onto the gears. you need a way of rotating the propeller's axle that doesn't disengage from the gear train while still allowing the propeller to gain height.

[@kittengoddess4259]

3:50 when you slow it down you can see that the turning motion also jerked the propeller end up and it looks like it knocked it into the air instead of it getting lift… I think a future video where the launcher is stationary or locked down would be a better test

[@Fugitive_8]

Makes me remember about the toys back then where you had a spiraled stick and a propeller you would push the propeller as strong as you can and it always flew hella high pretty nostalgic

[@neuronoc.7343]

Lego engineers inventing the rhotuka launcher from bionicle

[@brix_max]

I did the same with 2 buggy motors and in a specific configuration the propellers managed to hit the ceiling of the room. If the gear ratio gets too high it wont work properly due to limited motor power and friction

[@qwertyjeffMC]

SUGGESTION:Make the axle longer so that it has more time to spin: it will fly better

[@qwertyjeffMC]

Kinda like a guide that will guide it upwards until it flies

[@xiaoranfan9804]

Naaaaaakkkkkkhhhhhh

[@grass_cutter1236]

Should make it powered by one of those "pull back to wind up" car motors

[@pokemontrainer9285]

I remember doing that with those tiny drink umbrellas when I was little I would have fun doing that for a while.

[@ΝικολεταΤσιφτση]

Nice

[@elbinopaper4629]

100% you definently need to give yourself a longer handle and a bigger crank just to hold it way more firm instead of pinching two plates together while rotating a single lego peice with no handle that could definently help alone

[@NicJourney1KK_awesome]

I have one compatible with gears It’s the Old Lego red NinjaGo BayBlsde set just like yours but in red

[@Kraxel-North]

My little guess is that what you want isn’t light weight, but low efficiency. It sounds contradictory to normal logic, but hear me out; the propeller needs to build up some speed to actually fly up when taking off, and if it’s too efficient, it’ll flop out before having had enough time to get that momentum going. Plus, more mass = more innertia = slower descelleration = longer flight time (hopefully).

[@Chezkak]

While this is cool, it already exists. The Lego Bionicle line featured a disk launcher with a ripcord mechanism.

[@flynn.czlowiek]

8:17 theres some in lego spike set

[@FaisalMajeed-ts2fk]

Cool Legos

[@worldofsongs247]

Use the bayblade loncher up side down

[@nicksbestvideos8256]

Metal fight launchers are compatabel with lego gears 8:16

[@nikolasproctor7061]

Reminds me of the 2005 bionacle spinning propeller disc. Exact same concept

[@EasyMachine]

This channel never fails to impress me!

[@ShadeTheDragon505]

I loved those 9:20 they were something special 😂

[@krishkumar7999]

now adjust it to make a vortex in water

[@harryrigdon8496]

Can u make the longest lego train or make a train that is all sets in one

[@puppygamingwttb8525]

This reminds me of the nostalgia of the circuit game there’s a little fan and he had to connect to the battery box so it can get the fan working and it will eventually fall off

[@triview129]

Can you try launching wheel on water to see which one can roll on it

[@ranjandeb1159]

good job and i love your videos like your wind turbine one that you made

[@FaisalMajeed-ts2fk]

Cool 🎉

[@glitchygamingshorts6187]

Great video man

[@brickstudiosYT]

Thanks!

[@ScopeLab]

Almost as many revolutions per minute as France!

[@Orange_AvengerYT]

I can't

[@MOONLIGHT-x6z]

8:32 u can make your own ripcord you just might have to super glue it so it doesnt combust in your face like it did to me once

[@Alex-v4g5s]

8:18 you could use the ninjago rip cords

[@LegoBoomSG]

cool video bro 🤙👍

[@nathanloupee9337]

Try to use the ripcord to make the original design spin

[@Hood5944-k1c]

City update?

[@thebros4178]

Yessss

[@Colin-v1x]

Do you mean Gtag?

[@OccyP]

Just saying that small propellor is meant for water so its kinda unfair for it

[@brickstudiosYT]

Yeah, but I just wanted to try it anyway.

[@OccyP]

@@brickstudiosYT fair enough, but still, you should try it submerged

[@WillBinge]

Airjitzu used a ripcord compatible with the black gears

[@Haker111-ch7vv]

Beyblade made out of lego

[@Eatsleeprobloxrepeat24]

Bro acttualy explained gerar ratio in 5 secs

[@JoshyBoi7832]

shouldve used a string instead of a lever so u can oull the tring and use ur whole arm to spin it instead of just ur hand

[@feryhalim2207]

Lego Ninjago airjitzu flyers😂😂

[@theconsoleinthecloset]

Air raid siren

[@Star_gazer-yt]

10:32 bro is a professional upstairs and downstairs neighbor

[@Cyroid_1]

love ur intro

[@Sat0shi_]

10:16 You had to click it in (more than you did).

[@RJTheBuilder]

You should of used the city flying helicopters

[@stickman20233]

1:04 could you use this technique to make a friction motor and make a friction motor powered toy car thing??

[@brickstudiosYT]

Probably

[@extrascott9977]

could've used a pull-back engine

[@donaldmasci]

I also made one fly

[@Tubelixuno]

Use Pullback motors

[@Abagail-h9w]

try it with lego motors

[@roopeliikka7511]

4:08 the propeler is wrong way

[@ZACKII_MEXIPINO]

THERES NO WAY THAT WAS 2015!!!! ITS ALMOST BEEN 10 YEARS?!!?! I REMEMBER WHEN THAT CAME OUT LIKE YESTERDAY! I REMEMBER THAT ENTIRE SEASON OF NINJAGO!

[@Thehuntingbunny]

I had some of the bade blade lego set that was made in 2015

[@Goofyducky23]

Make it ×50 speed of you cranking and see wat happens

[@lePirateMan]

It's already x125

[@elf0n]

Lego Airjitzu flyers can fly

[@smantel3653]

The Ninjago spinjitzu sets. Have ripcorde

[@cibimonflf147]

who is bro like uh brother you’re all alone 😂

[@ZahirKelley-Laird]

W vid

[@bennm-ct5qm]

dude i used to make that 3 blade propeller with a wind up motor an with a technic wheel to make it easier to twiest and it went flying sorry i ment 2 blade

[@J56601]

Lego bayblade spinner😂

[@bryanb3627]

Bro same thing with me for that lego set

[@c00lm0d5]

Bro, the Lego gear tiles 8:22

[@theconsoleinthecloset]

Air conditioner

[@SkylerShwe]

2:20 Sky Dancers.

[@Кирилл-б9ц1в]

Ratuka spinner exists....

[@JayDodgeYT]

A death machine

[@SomeDudeWithoutContent]

@annalloyd9939 NO ONE CARES THAT UR FIRST anyways nice video

[@moritzhoffmann2210]

I got a prop that was on a big boat or something but I did that and it works much better then yours im talking 20-25 meters but I used a rope around a stick glued to it to propel it

[@bailx.1]

Try with a friction motor and

[@Turtle095]

Hi guys 👋👋

[@brickstudiosYT]

Hi 👋

[@Galaxyplayz-kp2ip]

Beyblade ahh lego

[@Ben-q9k]

Use a motor!

[@children4415]

Take this device and add a motor so you can make a helicopter

[@SomeOrdinaryJanitor]

Peter sripol made an rc plane out of lego

[@aaronzulaski4234]

The gear ratio is 1:125

[@bkb415]

what would happen if you added a fourth 40 tooth gear?

[@brickstudiosYT]

It would be so hard to turn I could probably barely or not even turn it.

[@bkb415]

@@brickstudiosYT thanks for letting me know before ordering the peices to make my own.

[@bkb415]

or what about attatching multiple lego motors and see if they could turn it.

[@brickstudiosYT]

@@bkb415 I'm not sure if the motors would be strong enough.

[@pemalhaden209]

Rc bricks the calculator😂🎉🎉🎉🎉🎉🎉

[@krissy01837]

bro make beyblade with this

[@fortressandroidpldn9758]

Beyblade gliders

[@Richard-uc2bp]

Already did that

[@play-dl9nz]

8:04 I know what you mean😊

[@random_things66]

❤❤❤❤❤❤❤❤❤

[@MotionMaster123]

Hello

[@brickstudiosYT]

Hello

[@MotionMaster123]

@@brickstudiosYT how is your day going

[@brickstudiosYT]

@@MotionMaster123 It's going great! How about you?

[@MotionMaster123]

@@brickstudiosYT good

[@goodtheme-wl1he]

bro just 3D print one

[@somenoob1021]

then it’s not a lego piece

[@Romanator-r1f]

Could I have some Legos please

[@codingzfun]

NINJAGO!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@glendalasac6370]

Gear ratio 1:75

[@TiffanyGill-j4q]

11:03

[@Just-sap]

I have a few but other colors 9:11

[@randomguyinyoutube4834]

Wait, 9/11????

[@Blocks1400]

easy

[@Zax_66719]

Beyblade

[@kariwardle8948]

214