I Made My Own Laser Measuring Tool - Here’s How

[@senorjp21]

Cool project. The case clamshell is great

[@JustMakeIt_YT]

Thanks man, glad you like it! 👌🏼

[@aryantiwari1263]

You just gained a loyal subscriber

[@JustMakeIt_YT]

Thanks for the support - really appreciate it! 👌

[@hectoraracena7076]

interesting aproach, well done! ... you have one more suscriber sr...

[@JustMakeIt_YT]

Thanks for the support friend! 👌🏼

[@EvilSpyBoy]

You should add a momentary button to the back so when you push it up against something you take into account the length of the device.

[@theuser810]

This is a fun project - the wemos looks like it can be used in my applications due to it's small size. I feel like you are going to become big someday!

[@JustMakeIt_YT]

Thanks for the support friend - let’s hope so!

[@filiepmaes9071]

Cool project ! where did you get this "things" for holding the pcb's for soldering, never seen before

[@sdfgsdfg3789]

Is there an ON/OFF button? How do you switch it on?

[@KilianGosewisch]

You should add a button or something to switch to inclusive mode which automatically adds the length of the case to the value. that would be super usefull

[@JustMakeIt_YT]

That’s a brilliant idea - definitely something I’ll implement if I remake this project 👌🏼

[@akaruiyami0015]

what a nice project!! but there are 2 things i'm curious about: 1. does it always turn on (since i dont see a switch to turn it off) 2. does it take in consideration of the depth of that hole between the sensor? since it looks like there is a bit of space between the sensor, (bit behind the enclosure case) that might affect the accuracy. additionally, if i put a glass to protect the sensor, would it affect the sensor in anyway?? well that made it 3 things... nice project btw!!

[@jeremyyounger5442]

So are you going to release to files for the project?

[@ShaistaCreates]

Right after u buy them yeah

[@hrmny_]

That tof sensor has a huge cone, not comparable to a laser at all

[@jacekf]

sharing is caring...

[@ShaistaCreates]

Buy it then like a good kid

[@AbdulHaadi-w6w]

Why not use an ultrasonic sensor which has a longer ranger

[@casbremer7793]

Ultrasonic sensors have a lot of noice. Further more, depending on the surface you are aiming it at it can disturb the reading or even not detecting it at all, just like when you are aiming the sensor at an angled surface. But the sensor he used also needs aan good surface

[@JustMakeIt_YT]

I've tried ultrasonic sensors for other projects, and as the other commenter mentioned, I found them to be quite noisy. The ToF sensor was easier to use and gave more predictable readings. That being said, it does indeed require a good surface. Thanks for the comment!

[@ShaistaCreates]

Better question yet! Why not just watch enjoy and move on 🎉

[@AbdulHaadi-w6w]

@@JustMakeIt_YT thanks for the info

[@mikelemon5109]

Why buy one when when you can't make a commercial one? because you can't. those can have range of few tens of meters while the little toy you made barely can do 3 meters...

[@ShaistaCreates]

the little toy you call a brain has barely 3 cells :/

[@jj_0]

Man, I'm sorry, but this hurt my soul. Why would you solder on the headers? If you design the whole case, why don't you create a place for the charging board to sit. If you are maker and create with electronic, buy more then one pice of the component so you can prototype and then have a clean product. I like you rugged design as well, but this had so much wasted space to fit all the the unnecessary pieces. You might not have a need to reuse, but please don't cut connectors clean off. Saving like a centimeter of wire to lose perfectly functional connector is not smart. I know all of this is not unusual here on youtube, but it does not make it right. I wish you the best and hope you will make much more, but you made me cringe as noone in a long time.

[@ShaistaCreates]

A Vision came to me! Yeeeeeesh…!. What A Sorry Sight , your Ancestors Surely feel the cringe , staring down or up on you 😢 ( and Your unseemly attitude) Whilst on the line.. you attempt wisdom ( a poor Choice , it suits you Not 😊 cringe. ) for You Have Nothing in your SOUL! a soulless, stupid Clown.. cannot be hurt . 😞 you silly little piggy oink swine 🐽

[@ShaistaCreates]

St NooNE also conveyed …. There is No Hope for 🏀✨🙏 for One with a 1 decade . 5 old KZbin With 11 SUBS! What have you DOOOONE ? NOOOONE ???? APPALLING !! 🅿️ “ you keep OINKING “ stop that infernal noise !!!! Delete comment and move on…… rehabilitation ✅ you foul stinky creature 😂

[@ShaistaCreates]

St NooNE also conveyed .... There is No Hope for for One with a 1 decade. 5 old KZbin With 11 SUBS! What have you DOOOONE ? NOOOONE ???? APPALLING !! P " you keep OINKING " stop that infernal noise !!!! Delete comment and move on...... rehabilitation you foul stinky creature

[@ShaistaCreates]

A Vision came to me! Yeeeeeesh...!. What A Sorry Sight, your Ancestors Surely feel the cringe, staring down or up on you ( and Your unseemly attitude) Whilst on the line.. you attempt wisdom ( a poor Choice, it suits you Not cringe. ) for You Have Nothing in your SOUL! a soulless, stupid Clown.. cannot be hurt. you silly little piggy oink swine