I mounted the Asus Bezel Free Kit on 32" monitors for $2.00 Here's how I did it!

[@2stopsbrighter]

Thanks for watching everyone, we appreciate your support! Please don't forget to subscribe, and like this video if you found it helpful.

[@sneipen77]

How thick is the foam your using? 5mm?

[@2stopsbrighter]

@@sneipen77 yup, 5mm 👍

[@SuperslowRacing]

I’ve got to comment and give a huge thanks to you, mate. This worked a treat. My bezel free kit had been collecting dust for months since I switched to 32” monitors. I tried a couple of different tape options but was never satisfied. This is all kinds of awesome. Thanks again for sharing.

[@2stopsbrighter]

Amazing! Comments like this make all the work worth while! So happy it worked out. Thank you for taking the time to comment! Truly appreciate it.

[@sethoselken9562]

Thank you for posting this. Where did you purchase your foam core from?

[@2stopsbrighter]

My pleasure and thanks for watching! I bought it a local dollar store here in Canada. The sell small sheets of it. I'd not check out any art supply store, they will have it.

[@WOojerVest3andQuest3onMe]

Heck Yeah, You’re Awesome! Thanks for sharing this wonderful trick! I just ordered some of these for my triple monitor setup. Hopefully, I won’t need to do this… but, if I do I will definitely use this. I ordered three 35’ Ultrawide monitors for my setup. 😉👌

[@2stopsbrighter]

Thanks so much for watching man, chances are you'll need to use this since the bezel kit is designed for 27" screens. You're going love the triple setup, so immersive!

[@WOojerVest3andQuest3onMe]

@2stopsbrighter It is absolutely amazing. It's like Magic! I was surprised how well these actually work. I got my Triple 35' Ultrawide Monitor setup and it is fantastic playing this way. Almost like being in VR without the VR. I ❤️ it. 😉👌☺️👍

[@2stopsbrighter]

@@WOojerVest3andQuest3onMe 3x 35" ultrawide must look sick! That's awesome man enjoy, and sorry for taking so long to reply. I totally missed the notification.

[@hank10198]

This works perfectly!

[@2stopsbrighter]

Awesome glad it worked out 👍

[@KenjiCL]

Amazing mate, thanks for the solution, I go to try this this weekend, my 3 monitor arrive the next friday

[@2stopsbrighter]

Awesome thanks so much for watching. Good luck and let me know how it turns out!

[@DrAlanQuan]

Clever solution! I love seeing creative problem solving. Thanks :)

[@2stopsbrighter]

Thanks so much, truly appreciate that!

[@C36B]

Hey man, this is phenomenal. I have the same monitors but struggling to find the right angle between them. Do you have any reference of the angle yours were set at?

[@2stopsbrighter]

Thanks so much for the kind words. I used the little angle tool Asus supplies with their kit and I'm at around 120 degrees. They state anywhere between 120-130 is good. Hope this helps !

[@scottydvintagevideos]

Very nice rig. I'm looking to get three 32" and didn't want to see the black bezels as I race. Thanks for the tutorial.

[@2stopsbrighter]

Awesome man, you won't regret it. Glad the video helped! Thanks so much for watching.

[@DaveOfRock]

U've saved me, man, thank you!

[@2stopsbrighter]

Awesome, glad the video helped!!

[@westeraz]

smart tanks!

[@2stopsbrighter]

Thanks for watching!

[@sneipen77]

Thanks a lot for this. One question: How thick does is the foamcore you are using? I found some 5mm sheets on Amazon but not sure if they fit? Cheers Kenneth

[@2stopsbrighter]

Hey, thanks for watching! Yup, 5mm is good, that's what I used! Let me know how it goes, appreciate you taking the time to watch! :)

[@igoodman2741]

great tutorial, this was super helpful

[@2stopsbrighter]

Glad you enjoyed it, thanks for watching!

[@lespaul7261]

Great and just got these, do you have to have the triple monitor angles as they recommend with the bezel kit? As my angles are completely different when i use the POV calculator? 👍👍

[@2stopsbrighter]

Hey thanks so much for watching. Yes, I followed the recommended angle, I would suggest it as well. Makes a difference on setup and realism.

[@gotzu357]

Great solution ! Thanks. How thick is your foamcore? Is it 3 mm?

[@2stopsbrighter]

Hey, thanks for watching! I went with 5mm. Let me know how it goes, appreciate you taking the time to watch! :)

[@gotzu357]

@@2stopsbrighter will let you know, now the hardest part, which display should I get ;) ?

[@2stopsbrighter]

@@gotzu357 yup! So many choices now!

[@mattshaffer83]

Awesome video. Thank you for this technique. Where did you get the foam core? I checked Menards and they did not have any. Amazon only sells in bulk. Gained me as a sub!

[@2stopsbrighter]

Thanks so much, truly appreciate the sub! I'm in Canada and picked it up at Dollarama our local dollar store. If not try out any art supply store they will surely carry it as well. Thx again for watching, let me know if there is anything else I can help with! 👍👍

[@teabagmcpick889]

Excellent. Thank you.

[@2stopsbrighter]

My pleasure, hope it helped!

[@katiedave1098]

Great upload very informative well done guys you just solved my 32 inch monitor dilema.

[@2stopsbrighter]

That's awesome, I'm happy to hear it worked out and thank you for the feedback. It's greatly appreciated!

[@LevelUpSimRacing]

Very cool Thanks!

[@2stopsbrighter]

My pleasure! Thanks for watching!

[@RigsideGaming]

Thanks for this! Can you tell me the angle of your side screens?

[@2stopsbrighter]

My pleasure! I used the little angle tool Asus supplies with their kit and I'm at around 120 degrees. They state anywhere between 120-130 is good. Hope this helps !

[@eNeruRacing]

Good sir, what an amazing find! One small question the foam is 3mm thick or what do you recommend?

[@2stopsbrighter]

Hi there! I appreciate that, thank you!! It's 3/16 of an inch or 5mm thick :)

[@eNeruRacing]

@@2stopsbrighter Thanks a lot and again much appreciated, you saved us a lot of money!

[@2stopsbrighter]

@@eNeruRacing Truly appreciate that, hope to gain you as a new sub !

[@kinglive2009]

Thank you Very much

[@2stopsbrighter]

Glad you liked it, and thanks for watching!

[@hazema.h2281]

Thank you for the video but can you tell me how much is the thickness for the foam core?

[@2stopsbrighter]

Thanks so much, It's 3/16 of an inch. Although if you have 1/4" I'm sure it will also fit, the standard one you find in most Dollar stores or Art Supply stores is usually 3/16 and works great! :)

[@hazema.h2281]

@@2stopsbrighter Thank you so much, really appreciate it 🙏🏻

[@2stopsbrighter]

@@hazema.h2281 my pleasure and thank you for watching!

[@jerryd4961]

How thick is the foam core you Used?

[@2stopsbrighter]

It's 3/16 of an inch. Although if you have 1/4" I'm sure it will also fit, the standard one you find in most Dollar stores or Art Supply stores is usually 3/16 and works great! :)

[@buzzcamtv4437]

Your foam board must be thinner than the stuff we get here in Australia. Sadly 5mm is to thick for the ROG mounts...

[@2stopsbrighter]

Are you not able to slide it in the clamps? It should be tight.

[@graeme111]

great solution, what is the thickness of the foamcore?

[@2stopsbrighter]

Thanks so much, I appreciate that! It's 3/16 of an inch. Although if you have 1/4" I'm sure it will also fit, the standard one you find in most Dollar stores or Art Supply stores is usually 3/16 and works great! :)

[@H.D.83]

that's 5mm in non yankee units @@2stopsbrighter

[@2stopsbrighter]

@@H.D.83 😂😂

[@PatrickHaggan]

How did you position the kit. I can’t seem to get it aligned so it actually works. A lot of overlapping.

[@2stopsbrighter]

Hi there, I'm not sure i understand the issue. make sure you have the monitors set to the suggested 120 degrees by ROG. Once you have that set up and you place the kit on, you have to go in-game and set your bezel width to zero. Everything should align perfectly! :)

[@Blooobster]

at what angle did you set your side monitors?

[@2stopsbrighter]

Hey! I have them set to the suggested 120 degrees by ROG

[@juniorbarra8296]

I was just looking for this things for my monitors...it's 92 euros...😮😮😮😮😢😢😮😢😢😮...wtf?!?!

[@2stopsbrighter]

92 euros for the bezel free kit? They aren't cheap but worth every penny if you're on triples.

[@EverythingSim]

I just got them for my triple 32s it’s so worth the 92 euros I also used this video and the foam core technique. Worked like a freaking charm. Genius. 👌🏻🤙🏼

[@2stopsbrighter]

@@EverythingSim amazing!!