You understand you still have to do the shed roof 😂
@williammedford58914 жыл бұрын
Fun stuff. lol
@aprilb8354 жыл бұрын
Bezel setting for a pear shaped facet. I have a tiny one I'm fighting with!
@teresapool75944 жыл бұрын
Oh yes! Me too
@jessieclover10254 жыл бұрын
Bezel settings for marquise facet stones to. They are a fiddle
@dancingwithnature53034 жыл бұрын
Thank you for your request! I'm going through the same process!
@jokevanderheeren31934 жыл бұрын
@@jessieclover1025 I would also like to see how Andrew makes a marquise setting :D Good idea!
@gabrielkirkbaca29104 жыл бұрын
@@przybyla420 , now I use a impact hand piece. Before I got that, hears the best I can suggest. First try a burnisher, starting at curve do not make contact , a gental press . Then do at 3:00 o'clock, then, 9;00. Remember gentle. That will stabilize the stone, when you start tapping, do just like with burnisher, couple mm then directly opposite. DO NOT DO TIP TILL LAST. Then I buff with 600 grit emery stick. I'm really sorry this took so long , I really want you to succeed
@Alancclive4 жыл бұрын
Please show us a video showing how to set stones into rings , I struggle doing this . Thanks Andrew keep healthy 👍
@monaradu30344 жыл бұрын
Uuu setting is a long story..But NICE👍
@refeicul4 жыл бұрын
i think you need to be more specific flush setting, using burrs to cut for a setting.. i struggle with flush setting myself.
@Alancclive4 жыл бұрын
refeicul any help would be helpful, I struggle with forming a setting that’s not flush but any help would be helpful 👍
@stellagirl76254 жыл бұрын
I would like to see a flush setting🤔
@HouseholdDog4 жыл бұрын
Various home made jigs for soldering. Work holding for soldering odd shapes. How to use binding wire.
@kristiethomson53094 жыл бұрын
great idea for a video. I’ve got two chunks of fire brick I sawed off to make “solder furniture” but they aren’t even even enough to use as props, and that’s it. I bought the titanium strips, but can’t figure out what ways they’re best used. Aaaand I’m still stuck at “bending a T-pin and hope it holds.”
@irenedebruyn27964 жыл бұрын
I find bobby pins (hair clips) are very useful for holding pieces together. They can also be bent into various shapes
@juliegodseyjewelry4 жыл бұрын
IRENE DE BRUYN oh interesting idea! And they don’t burn or melt or anything? I guess I’ve never thought about what bobby pins are made of 🤔.
@juliegodseyjewelry4 жыл бұрын
Yes would love this! I have lots of ideas for random cuts of wire to be soldered together but like how the hell do you keep them in place and how can you make the joins neat when they are not uniform?
@Dan-ji4db4 жыл бұрын
There's a disturbing lack of claw setting tutorials on youtube. Would love to see how you do them.
@jstralis72774 жыл бұрын
Me too 😀
@juliegodseyjewelry4 жыл бұрын
Same!
@eivindkofod17744 жыл бұрын
Me too
@sas1uk1854 жыл бұрын
Great! Could you possibly show us how to cast a seashell using delft clay please? Thanks Sas
@stellagirl76254 жыл бұрын
Rivets, how to make and set, tube and solid. Different solder joins, round to flat, soldered sleeve/thin sheet around thick wire. Forming, specialized hammers and how metals will move and the degree they move at
@juliegodseyjewelry4 жыл бұрын
Anna name Oooh yes to all of that 🙌🏻
@eivindkofod17744 жыл бұрын
There are good points here
@admirathoria00734 жыл бұрын
Bezel settings using cabochons with corners.
@alcanobeeone74204 жыл бұрын
I know you’ve covered this but it’s often tough; properly polishing finished work with different metals on the same piece, brass and silver for example. Or maybe a new video on how to properly cut metal for various pieces like flat cutting, cutting curved metals etc.
@gabrielaeperez68734 жыл бұрын
Andrew Thank you for staying in touch us during this virus lockdown. I have been watching your videos for about 6 months now. Love love love them! In this time frame you have taught so much . And I still have so much to learn. May god keep all of you safe. 😷 💝
@DebbyEarthJewel4 жыл бұрын
It would be helpful to see tips and techniques for more complicated soldering - mixtures or heavy and light gauges with some structure.
@ingridsaab54134 жыл бұрын
Yes, please 👍🏻🤗
@safi1014 жыл бұрын
I second that!
@ScottishLM4 жыл бұрын
How to shine jewellery by hand.. for beginners who dont have fancy tools
@carlaavogadri65924 жыл бұрын
Me too!
@julienaybour714 жыл бұрын
I also agree. Have requested same. Would like Andrew to show all the options once you've finished a piece - from the pickling, sanding, etc, both by hand and with optional tools
@julienaybour714 жыл бұрын
and also tumblers? are they necessary? Any alternatives?
@julienaybour714 жыл бұрын
@@wildrose2748Thanks Angry beaver. That's a help but would also like to know which attachments are the best
@amygreen54374 жыл бұрын
Would love to see a video showing you setting different shaped rough gems in different ways!
@eivindkofod17744 жыл бұрын
One (more basic) could be: How to make square, conical settings using a square-holed bezel block? Everybody demonstrates round ones, but please do a square one. Another one: how to harden and tempering tool steel/stainless steel. I am playing with bending tubes and need to make the pig-tails to form the curls. You could also make one about making tubings to measure. Or: a bit about making tiny coil-springs for clasps Or: correct use of tiny tap-and-dies for nuts and threads Or: How to use a ring bender without getting all sorts of sharp marks on the outside of the ring Or altogether how to make our own tools. I am sure, you have a collection, you have made by yourself. Or: How to make round wire on a square rolling mill
@Tesseltjuhhxx4 жыл бұрын
I'd love a video on the square settings as well (the first suggestion). Thank you Andrew!
@nadinewouters44794 жыл бұрын
I m also very interested in the square conical setting please!
@tressaamir5664 жыл бұрын
Eivind Kofod all great suggestions!
@refeicul4 жыл бұрын
I personally would like to see stone in place casting and flush setting stones. ty for your content you have helped me with soldering and keeping my bench clean and tidy.
@refeicul4 жыл бұрын
but yes as you mentioned hammering an ingot into a sheet or wire that would be a good video to watch! Polishing a 50lb anvil or resurfacing one to get it ready to do such work.
@Kat-hb2mo4 жыл бұрын
Argentium silver tips and tricks. I need help with centering an earring post to a back without a third hand. Because Argentium silver is so brittle when heated the third hand will shatter the earring post.
@bonniecarbon88474 жыл бұрын
Bezel blocks...how to use square, circle and oval shape for faceted stones. Thanks for all of your shared knowledge!!
@marianneoxley57174 жыл бұрын
Soldering a back plate onto a decorative back plate - I love the look of stacked back plates on rings and pendants!
@mariaprice50984 жыл бұрын
Prong Setting And sawing out detailed patterns.
@dancingwithnature53034 жыл бұрын
First, stay healthy! Second, making prong & partially open backed bezel setting for freeform & non-standard size cut stones. Third, we (Washington state on NW coast, USA) just started our lockdown. I plan to binge watch this and Mock The Week!!
@drewmcewan29984 жыл бұрын
Anything to do with repousse and chasing, especially making your own punches if you do it.
@juliahatch63604 жыл бұрын
How to avoid or deal with firescale, I find everything seems to be going well, polish up and then the firescale is visible. Not sure what I’m doing wrong.
@petrichor71214 жыл бұрын
A lot of suggestions already here, all of which will be helpful to me so I won't add any, but I will say 'thank you' for the opportunity to focus on something else. Looking forward to the uploads! Prayers for safety and good health to everyone in the community and the rest of the world. God bless!
@safehavensanctuary-hollyg.88144 жыл бұрын
Oh I love that question! I am a poor novice metal jewelry artist so can you start a new step by step series? What’s the minimum supplies needed to get started, best places to get equipment on line, what to look for, what to avoid, thinking outside the box for ways to get metals (for instance copper pipes,) and making simple jewelry pieces to sell and build the business. I do work with polymer clay, metal clay, and beading so incorporating these pieces into metal clay and also collaborations with these polymer clay, metal clay, and beading artists on KZbin would be awesome. Thank you and stay well!
@ingot_buddy4 жыл бұрын
Can you show us how to solder multiple rings together? (2-3 rings)
@sharonspiers47404 жыл бұрын
Soldering tips when using gold with comparison to silver... ie. This works for silver but doesn't/ for gold. I'm experienced with silver but only have theoretical knowledge for gold solder . I piece of gold is sitting in my bench draw waiting to be transformed. Many thanks for sharing your expertise. Stay well.
@wendyshaw69854 жыл бұрын
Sharon Spiers I agree with you Sharon. I am just starting to work with gold and would like to see projects using gold. The gold prices are dipping, still expensive, but better. Maybe on you At The Bench venue.
@cnenails37544 жыл бұрын
Andrew can you show us your camera set up please for birdseye view type working
@jasonsgems33694 жыл бұрын
How about how to make 3mm bezels (especially when your fingers are sized z+)? How to make and use impression dies? Making and using pancake dies (including without a press) How to make bezels on a curved cuff bracelet? Flush setting or gypsy setting a cab and faceted stone into a ring, bracelet or other curved surface? What to do with a stack of pre-decimal copper coins (apart from the obvious coin rings, lockets, rocket ships, zepplins, steampunk goggles, conchas and squash flowers).
@kristiethomson53094 жыл бұрын
“Show us how to make things out of this particular coin I have, but it can’t be .”😂😂
@jasonsgems33694 жыл бұрын
@@kristiethomson5309 yeah, well, I'm running out of ideas but not coins 😁. Done rings, necklaces, pendants, cufflinks, tie pins, stick pins, goggles styled cravat pin, desktop ornamental rocket and currently working on a concho bracelet (but need to make 3mm/3.5mm bezels for some coral and turquoise). I'm working in copper, brass and nickel which gets sealed to prevent tarnishing.
@timsresources074 жыл бұрын
Anything on shaping and sharpening gravers. Which are the best tools to help getting the angles correct. Thanks very much Andrew, keep well. 😊
@almac25984 жыл бұрын
How to drill small holes without breaking the bit. Thanks for sharing.
@twanbox52534 жыл бұрын
Constantly Turning
@lijungchan91464 жыл бұрын
These are the steps that work for me: 1. Use center punch to mark the piece. 2. Put a piece of wood under your piece 3. Keep the drill in a 90 degree angle 4. Hold the drill steady, do not put pressure on drill to force into metal, let the drill do the work.
@billyc20104 жыл бұрын
I'm struggling with trying to set a split shank on the side of a bezel cup without bending it. I just can't get it right, everytime I think I've got it, the cup ends up deformed and unable to fit the stone in.
@jessieclover10254 жыл бұрын
use a very thick gauge for the base of the bezel cup too.
@glencolwell59294 жыл бұрын
I would love to see how to properly use setting plates to make different shape settings from emerald, oval, triliant shapes and the correct size in relation to the stone size.
@Suburbanstoneage4 жыл бұрын
Hi Andrew! Perhaps a video on how to make jewelry from found objects at home, or re-purposing antique jewelry we may have lying around? We're on lockdown too and would love to work along with you!
@johnfore94784 жыл бұрын
Where to find fine tools. Like files, pliers, tools that will last a lifetime
@moxnyx94514 жыл бұрын
If you're in USA, use Rio Grande Jewelers Supply
@norrinradd35494 жыл бұрын
John Fore. In the UK and EU(for now) Cooksongold is a good supplier, who often does free delivery too. But I would stay away from amazon if you could, because they don’t treat their suppliers very well...
@jasonsgems33694 жыл бұрын
@@norrinradd3549 Betts Metal is another supplier of jewellery tools - they took over Sutton Tools last year. Cousins and HS Walsh also provide decent ranges of tools. I aso got some extras for the foredom from metal clay limited that i couldn't find elsewhere (duplex adapter & extra long flex shaft)
@norrinradd35494 жыл бұрын
Jasons Gems, thanks for that, I am fairly new to this, and so I have only bought things from Cooksongold so far. And I have been happy with their prices and range, so that is why I suggested them.....
@johnfore94784 жыл бұрын
The problem is I am not new to this. And it seems just about all profit is going out into crap tools. I am to the point of almost quitting because of it.
@mitsospapas33064 жыл бұрын
Granulation and the mixture that solder the granules with the silver or gold surface. Thanks a lot stay healthy
@RichardTymko4 жыл бұрын
Id like to see a youtube video on Kembu techniques on sterling silver. Thanks for the education, I have learned alot from you.
@jokevedehaa4 жыл бұрын
Maybe some spring cleaning tips? Eg how to store pliers, stones, metal scraps... And how to clean tools and the top of your bench...
@OutOfNamesToChoose4 жыл бұрын
Working with wax! How to sculpt it, how to achieve a good finish, how to attach a sprue/channel for the metal to flow, etc. Edit: Also, thanks for providing so much content. I love learning new techniques; I'm not a jeweller, but a surprisingly vast amount of what you talk about has been useful to me in a practical way.
@katharinak95244 жыл бұрын
How to construct a rub over setting for an emerald cut stone. Please!
@lesleydavies11114 жыл бұрын
I would to have a go at simple filigree but I have been told it's very hard. Stay safe everyone xx.
@yunlin8324 жыл бұрын
Kudos Andrew! I'm trying to solder a very fine chain directly onto a diamond already set in a 4-prong basket setting. It was previously soldered to my mother's old box chain, which over the years had gone a little wonky. I've cut the old chain away, but I melted the new chain a few times trying to attach it to the setting, so have ordered some easy 18K solder to see if it will help. Some pointers will be much appreciated! I can send pics!
@LittleCherryHill4 жыл бұрын
How to get a proper polished finish on a sterling piece ~ right from fire stain to the finish. I’ve been hand making for ten years and am mostly self taught and I Still struggle to this day with a good even shiny finish!! And thank you and stay safe/happy in lock down!
@mariekepb4 жыл бұрын
Thanks Andrew! Silver granulation and how to solder it, please. Plus prong settings if possible. Thank you :-)
@harrietwilson79184 жыл бұрын
Hi Andrew. I'd like to see techniques on how to create brooch backs, fixings and pins?
@faby64514 жыл бұрын
I'd like to know how you make prong setting for cabs!
@JayDub_1434 жыл бұрын
We are quarantined starting at midnight. I would love to see all the ways to bezel set faceted stones without having to have tubes and special burrs etc.. I am a beginner with limited resources but there has to be ways to do it with basic wire and sheet 😁🙏 Stay strong everyone we will get through this!!! Hugs and love to everyone. Thank you Andrew your vids are always BRILLIANT!
@dancingwithnature53034 жыл бұрын
We started our state lockdown last night, as I was staring down at bezels I have to work on! Great question!! Stay healthy!
@JayDub_1434 жыл бұрын
@@dancingwithnature5303 thank you so much wishing you and yours all the health and safety as well! Its scary for sure but we need to keep faith this too shall pass...
@Lazywatchsmith4 жыл бұрын
Make some jewellery from house hold items with basic tools. Something that people can relate to.
@julieteeples53364 жыл бұрын
Soldering a larger sized bezel flush onto a curved ring or bracelet. Stay safe and thank you.
@PUNKXAI4 жыл бұрын
“The Life Aquatic” You are so Team Zissou!
@Dazzledust224 жыл бұрын
Hi Andrew, I'd love a tutorial on flush settings.
@heatherelizabethallen85634 жыл бұрын
I love to see flush set d shape band ring
@albertpartridge67164 жыл бұрын
hi Andrew, would it be possible for you to show some stone setting not bezel settings more in the way of prong settings or very small stone setting as in less than one mill please, different ways of soldering very tricky pieces as you did with the ear ring chain without putting the flame anywhere near it you just heated the solder pick that would be great, take care stay safe and lets hope we all get through this terrible virus.
@page76metalcraft194 жыл бұрын
Little more detailed tips and tools for carving wax. Like actuall techniques start to finish
@dianemorris91264 жыл бұрын
Thank you Andrew, I've just joined at the bench.com, and watched your film on channel setting. I'm lucky, my workshop is in my house so no stopping for me. Got some pink topaz so I'm going to try out that setting! I'd love to see more on casting. Stay safe, and thank you for all your inspirational films.
@gloriaredmond51724 жыл бұрын
You are an awesome instructor. I’m new at jewelry making. I am trying to make bezels for sea glass. As you know sea glass is irregular shaped. I’m having problems picking the right size bezel wiring. Help needed. Thanks
@allanthompson9695 Жыл бұрын
257 comments, wow. Should keep you busy way after lock-down. Thankyou guys for all the content you create. You are a great educator.
@safi1014 жыл бұрын
How about showing the steps for pavé settings and how to measure out the placements for the stones? Also would be great to learn how to solder more complicated pieces that require many joins. Thanks for everything you do, I've learned so much from you!
@ceesteven4 жыл бұрын
Hi Andrew. I work with silverware of different compositions. Stainless, silver plated and sometimes sterling. Many times I find difficulties soldering some of the plated pieces with regards to heating techniques, which solders, fluxes and such. As you know, silverware varies in size and shape so that’s also a large factor. Since following your channel, I try to use the borax cone and dish but sometimes, when I’m have difficulty, I found using other fluxes may help me. Regardless of the wonderful channels on the subject out there, I thought you would certainly have good info and techniques. Thanks.
@girleddy4 жыл бұрын
How about a video about how to set up a small torch? I bought one but haven't found much info about what to do "out of the box". Kinda afraid of it!
@UnlikelyVentures4 жыл бұрын
I'd love to see a practical example of a "cut card stone setting". They seem to be fairly uncommon, but it's such a fascinating setting. I only see them in books so I would love to see someone actually make one and attach it to a piece.
@masterpeace45984 жыл бұрын
Andrew👍 a live stream jewelry build and answering super chats would be very cool 😎
@AmericanCoinHunting4 жыл бұрын
More on soldering unlike metals. Such as sterling to gold , sterling to bronze and brass etc .
@TheSassyone24 жыл бұрын
Yes :)
@Junoshelly4 жыл бұрын
Andrew, I love the idea of live webcasts. We had such great fun in the Periscope days. I was going to suggest a live broadcast of some sort.
@jasonemery17424 жыл бұрын
Channel Setting Princess cut stones PLEASE PLEASE PLEASE !! Always love your videos and have learnt so much , but really struggle with channel setting princess cut stones . How to cut the best channel and get the fitting correct , what are the best tools to use , how to best ensure the stones are level with each other & secure to stay in place ?? Fingers crossed , here's hoping for more expert advice . Thanks
@jschalk74 жыл бұрын
Turquoise inlay ring - using square wire on either side creating a middle channel.
@bluefernlove4 жыл бұрын
Andrew, how about a video using different metals, like aluminium? It is easily recycled from cans, hypoallergenic and soft to work with. The only caveat is you can't solder it like silver so riveting and other tricks might come in handy.
@gemmaster93694 жыл бұрын
Hi dear ANDREW , will that be possible for you please to talk about “how to start a jewellery shop” and how to get into the market for beginners?? And talk about the relation between Jewellers and the Gem Cutters and Facettors and Gemologists in the Market? It will be very much appreciated. Cheers, from Sydney.
@julieshipman-rockley6064 жыл бұрын
I am still collecting tools to start making jewellery so I am quite happy with all that you do, I want to try and make my jewellery natural and coastal themed, so rustic silver rings and cuffs with pearls and melted silver that looks like waves etc will try find some pics and send to you, please keep safe and wish you and your family well. Xjx
@runeodinsson7654 жыл бұрын
Maybe pin point set? I see a lot mounts with them but I’m not too comfortable trying it.
@dlgraves114 жыл бұрын
please make a video on how to do inlay jewelry, particularly the metal part of the process
@danceswithaardvarks32844 жыл бұрын
about a year ago you bought a durston jewellers bench. could you do a second review now you have had time to find the pros and cons?
@Carte-Blanche-NZ4 жыл бұрын
Why don’t you do concept to object! So we can see you develop an art piece including coming up with an original idea. It helps to see that process in action.
@dancingwithnature53034 жыл бұрын
Exactly what I was going to ask!
@Carte-Blanche-NZ4 жыл бұрын
Dancing With Nature I come from a curatorial background and see artist do it all the time. So valuable. Every artist does it slightly differently. Andrew could also connect it to good products as well eg art supplies , computer programmes. Untapped area as far as I can see Andrew.
@johntartaglia26724 жыл бұрын
How to make locket and bracelet hinges. I'm going to try cold turkey, but a little advice wouldn't hurt. LOL
@faaqcee78964 жыл бұрын
A contemporary decorative piece commemorating the lockdown. How about a gem tipped model of the Coronavirus in silver or gold? Thanks for the video!
@roylewis53864 жыл бұрын
My problem is this: Jeweler's saw blades, how do you tell which is which once they are out of the package? I only have one saw frame so I change blades depending on what I am cutting. I put the blade I removed aside because it is still usable, however I do not put it back in the envelope with unused blades. When I am finished cutting and move on to another task, I do not always remember what blade I had/have in the frame, so it may not be the right one for the next project. As a result I have a collection of used, but still usable, saw blades with unknown TPI. My eyes are not sharp enough to attempt to count the TPI, so what is the solution? Thanks so much, I have truly learned a great deal from you. My personal favorites are the soldering tricks, my metal melting and soldering failures have decreased greatly thanks to you sharing your knowledge.
@noelblanchet69294 жыл бұрын
I would like you show us how to draw on paper a ring model to glue on the silver before cutting. Thank you Andrew.
@terrybrann52544 жыл бұрын
Mr. Berry I would very much like to see an in depth video on fishtail setting and calculations for eternity bands.
@mahtoosacks4 жыл бұрын
Do an eternity ring. I really want to see you do this as everything else out is junk. Especially touching on gravers
@johndrewniak89134 жыл бұрын
I would love to see different type of chain styles and how they are made.
@TheTubeofjo4 жыл бұрын
I see you’ve had lots of input already, but I’d love to see some more enamelling with a kiln if you could or some PMC creations.
@slappymchappy4 жыл бұрын
I would absolutely kill for a video/series on how to do investment casting
@jacquialves39494 жыл бұрын
How about a variety of claw settings for different shape stones, thank you
@irenedebruyn27964 жыл бұрын
Hi Andrew Thanks so much for all your helpful videos. Could you do one on bezel setting a two sided or reversible cabochon? Especially those with an acute angled edge... Much appreciated and stay well Irene de Bruyn
@julietatkin82614 жыл бұрын
I'd quite like to know how to dome an oval shape - either using an oval doming punch or a round one.
@SquishyMit4 жыл бұрын
How to sand and polish in hard to reach places of jewelry? Tips and tricks. Thank you!
@jessieclover10254 жыл бұрын
try a barrel polisher. Not cheap but saves loads of time if you want to run a business
@robinjacobs35534 жыл бұрын
Also how to get a bezel like daggers to stay flat on the back plate. Everything I try it winds up lifting on one side then they melt! Even balling wire won’t hold it flat enough to solder . Thank you for all you do!
@pupuleniu4 жыл бұрын
Love your videos! I’d like a tutorial on how to make backless bezel settings for faceted stones. Thank you!
@johnsmalldridge63564 жыл бұрын
I think you should show videos on how to make commonly used settings and findings.
@lijungchan91464 жыл бұрын
Hi Andrew, thank you for all the wondrrful videos. Can you make a video of "bezel setting with cabochon corners stones"? I had a difficulty find a good online training video. Thank you
@portnoithegroundhog4 жыл бұрын
Stuff to do with cheap metal, awful flux and awful solder. I have lots of steel wire, solder and also a few fluxes. I made a net needle that did OK with outrageous amounts of solder. I'm afraid it's too toxic to gift but I like it anyway. I don't have a budget for fine materials but I do want to learn filigree before I die.
@jamesbarisitz47944 жыл бұрын
Could you make a video on a silver ring with an irregularly shaped opal in a bezel setting? I have quite a few opals that are not "standard " I'd like to try making them at the bench, but am a new learning maker. Thanks Andrew.
@brendawhite2434 жыл бұрын
Hi. I've bought some solder and I'm having difficulty cutting the solder into pieces. I've bought several different shears and still can't cut it. What are the best shears for this job? Also how to make t-bar and toggle clasps would be good. Cheers x
@yunlin8324 жыл бұрын
Hi, did you try either rolling or hammering the solder thinner? I had the same problem with solder I bought from Cookson Gold. They came in nearly 1mm thick ribbons and I couldn't cut them with my shears until I flattened them down to half a mm or less.
@brendawhite2434 жыл бұрын
@@yunlin832 Hi. Thanks for your advice. I will give it a go. I bought my solder from Cookson Gold too! Why they make it that thick I do not know.
@irenedebruyn27964 жыл бұрын
I use embroidery scissors to cut sheet solder.
@lilielouise35764 жыл бұрын
Hi Andrew, I would love to learn different ways of replicating pieces using lost wax casting, for example for building collections to save time. Thank you!
@gordo62024 жыл бұрын
I would like to see a video on "How to channel set stones". Thank you.
@aisoalboaiso4 жыл бұрын
Thank you Andrew!
@0-0.s724 жыл бұрын
Hi Berry, I am a fin your video. I will be interested in the GALVANIC EQUIPMENTS what you should pay attention to equipment or process. thanks for your support Opel from German
@sheena88694 жыл бұрын
I would love to see a video about working with step bezel wire. When I've tried to use it it tends to end up sloping rather than vertical
@stellasanteu4 жыл бұрын
Hi Andrew, Could you please show your viewers how to make a signet ring or explain at least the concept of the construction at one stage?? Thank you for all your videos I'm learning a lot from them!!
@Livvpivv4 жыл бұрын
a cuff &or bangle tutorial with a bezeled stone on it!
@odblacksmith25624 жыл бұрын
I'd love to see a video about silver and gold solder, what I already know: silver solder has a lower purity like 60-75% silver content and lower melting temp alloys added. What I would like to know: Does gold solder like 9k or 10k contain 9k or 10k gold content just with alloys added for lower melt temp? (Easier put is 10k solder basically 10k gold just with different alloy than standard gold?)