I Own a Golf Company (Takomo)

[@GrantHorvatGolfsTwo]

This is one of my first times hitting the clubs! Hope y’all enjoy

[@donaldwilcoxjr.5212]

Watched elite build your clubs last week ....

[@TheCjclaflin1]

I was looking to order the 301cb but I prefer graphite and the options available were only two. One a Takomo shaft the other was Atmos red. Not familiar with either. Wish there were more options

[@javiersalas7670]

Where in Los Angeles or Orange County can I test these?

[@codryatho10]

Do we get a Grant discount code???

[@ChicoGolfs]

Big congrats on the new partnerships and ownership this year, Grant!! As far as club selection goes, I was hoping Takomo lets me mix the set up a bit. I want to play the 101Ts in the 4,5,6 irons (1 degree weaker) The 301CB in the 7,8,9 and a 301MB in the PW. (PW 1 degree stronger, 46°) My handicap floated around in the high 20’s in 2024. Mind you I didn’t play much dew to recovering still from ACL surgery. I currently have Spalding CB’s from the mid 2000’s and the only thing I like about them is the spin I get. No question I could use more forgiveness but I really don’t want to lose the spin from the mid to short irons.

[@RJ-rm3fy]

As the owner, I hope you can persuade them to allow single iron purchases. I’d love to build a set with 301 CBs for PW-8 and 201s for 7-4. Either way, congrats on becoming part of the ownership! God Bless dude!

[@Mr.Pip_]

You can do that with custom buys and working with customer service.

[@Blurampage]

@@Mr.Pip_which is MORE expensive. Clearly that is why he’s asking. And I fully agree. Why do I have to drop 250-400$ for 1-2 irons?

[@cheesyQUESO]

THIS PLEASE

[@paulwags662]

@@Blurampage because it costs them more to produce partial sets and to hold the extra inventory

[@ElSchatzo]

That would increase all of Takomo's prices, bad idea.

[@GMilstead102]

Shout out to 1, takomo for not going the rich man sport route. And 2, grant himself for promoting a brand the working man can afford.

[@mikeshar852]

@@GMilstead102 if you think Takomo sponsoring KZbinrs won’t raise the prices of their clubs, you are wrong. They will use YT golfers to increase their market share, and soon as they got a reliable customer base, the prices will go up. Probably not to big brand prices. But they will go up by a pretty good amount soon. By 2026, MBs and CBs will be $1,000 maybe more.

[@famoussasjohn]

@@mikeshar852 Takomo sent an email with the promise not to increase prices shortly after they signed Grant. If they bump prices, they're going to lose customer loyalty in a significant way.

[@AndyGolfsYouTube]

@@mikeshar852I’m sure you know takomo’s business plan. Their entire pull right now is the quality of club you get for the price. If they begin to increase the price to the other big dogs, nobody will buy them because the bigger companies have more RND and reputation

[@brettknight2314]

@@mikeshar852yeah definitely that’s exactly where they are going with this to make more money

[@A1BASE]

‘I’ve bought an ownership stake in Takomo’… ‘I’ve never hit a Takomo club before now’… Think about that. Guys. Grant is a marketing machine. The clubs might be great. They might be garbage, I don’t know, but don’t rely on the fact that Grant is an owner to sway you.

[@ACHVPEAK]

I ordered the 101Ts head and put them on Mitsubishi MMT 125TX shafts. They are buttery smooth and love them. I played with Cobra Forged Tecs since 2020 with the $ taper 130 shafts as well. Last year I switched my Forged tecs to MMT 125TX and immediately noticed a difference in dispersion and feel. I still have my Cobras too. I might switch heads from time to time but the MMTs are there to stay. Right now I’m playing the 101T and enjoy them.

[@DanWessonSpecialist]

You’re going to need those Cobras in a couple years to get back the spin.

[@jjoddo4530]

Can you order just iron heads only?

[@DanWessonSpecialist]

@ Yes. It’s hard to locate the place but it is on each models page in a small block.

[@bluetoughguy]

The negative to Takomo is the lack of fitting options like G had with taylormade. It could be that with the correct graphite shaft, it would be a net benefit for him. That said, you can't deny the price to performance of Takomo.

[@TylerBaker-ky7rp]

He gain equity in the company. Which is a smart decision.

[@terryjohn686]

Grant can easily go to a club maker and try out any shaft for the Takomo.

[@demsareunamerican6800]

​​@@terryjohn686 Grant can, you can't. That's the point OP is making.

[@stephenhodge8417]

@@terryjohn686 they are DTC so club builder/fitters don't have the heads in their fitting matrix. It's the biggest miss Takomo has at the moment. They could really expand their reach by adding their heads to the smaller fitters out there.

[@builtat_the_beach1516]

​@@stephenhodge8417 they just started the company give them time

[@smashfactorfitness]

Grant you got it backwards with the MMT shafts, assuming you we hitting the 125tx version. Lower spin then steel and will keep you ball lower. Very high speed players will use shafts like these, your buddy Bryson being one ( he's obviously in LA Golf shafts)

[@iammars142]

Hard to take anything he says seriously when it's obvious he did no research on the specific MMT shaft he's hitting or the graphite market in general. He didn't once call it MMT and he didn't tell us the flex and weight. Just "Mitsubishi graphite" on the graphic. I get that his vibe is a laid back, go with the flow guy, but when you're trying to educate others and convey knowledge, you need to be prepared. This video was a miss for me.

[@wrhodes89]

Agreed, I actually think you get less recoil personally which is why I started playing the 125TX MMT's to being with.

[@jeffyboi6969]

@@iammars142 bro just wants to get paid and smile.

[@sc.bonder9900]

@@iammars142it looked more like he had no intention of giving the graphite a genuine try lol. Not stating what the shaft is or doing any research. Hear the same old, graphite stereotypes lol. Too cool for school. Or lacks confidence lol.

[@raybowles8587]

I ordered the 101T irons, suppose to arrive today. Excited.

[@kswan2234]

Welcome to the team!

[@MachoManAndySavage125]

Got my 101’s a few months ago. The faces wear incredibly fast compared to most brands, just a heads up. My 7 also has a weird clanky sound even when middled. Maybe something is wrong with my 7i, I don’t think that’s the norm, but lots of people have complained about how fast the faces wear. Maybe 100 balls with my 8i and it has a very noticeable wear mark out the middle Edit: I really do like the clubs and the price is great

[@nelsonapontejr.6793]

Had my 101ts for 2 seasons now, no noticeable wear issues for me.

[@MachoManAndySavage125]

@@nelsonapontejr.6793 interesting. Mine is pretty noticeable

[@riprock31]

I have the 101s and 201s. 3 years with them. Zero wear issues. I primarily use the 201s, but sometimes play a mixed set with the 101s. Also, a shout out to the sky forger wedges. 52,56,60 great setup for my game.

[@jordanlambert2618]

Would’ve liked to see a launch monitor included so we could see numbers. Still a great video, keep up the amazing content!

[@Jrgoldenbear]

Yeah, why wouldn’t he put his numbers on there?

[@bryansmith7490]

The Fujikura Axiom graphite shaft is hard to beat. I switched my Mizuno Pro 245s from Dynamic Gold 105s to Axiom 105s, and the feel, distance, accuracy, and dispersion greatly improved over the DG.

[@nataliedeyton6829]

I have the same shafts and love them

[@riprock31]

Ditto on the Axiom shafts. I have them in the 201s.

[@PetSKi67]

Nearly any shaft is more accurate on the dispersion than DG.

[@BloodySoup74]

Actually I loved my DG's but made a change just to make a change. Nippons are awesome for me.

[@PetSKi67]

@@BloodySoup74, had Modus3 120 TX on my set for a season. Really good, but did not like the height they launched. Just did not fit my eye. Back to KBS C-Tapers now and really like the flighted ball I get with them.

[@dinosaur6756]

There's two types of weight on a golf club. Static weight and swing weight. Static weight is the overall weight of the club if you were to lay it on a scale. Swing weight is how heavy it feel when you are holding the grip end and swinging the club. An advantage to graphite is that the static weight of the club can be made much lighter while maintaining the proper swing weight. If you grab the clubs by the clubhead end and swing them upside down you can really feel the weight difference between steel and graphite shafts. Steel tends to be more consistent and can lessen spin rates in irons. Graphite is ideal for golfers with lower swing speeds looking for a higher trajectory. These are generalizations because modern graphite shafts come in a variety of weights and flex points that will fit a wide range of golfers and skill levels. The deciding factor might be for some lower handicap players that graphite tends to be more forgiving. This is the case on both mishits and on the golfers body. Especially the hands, wrists and shoulders. You play a lot of golf and if staying physically healthy is an issue, perhaps it's something to consider in your decision. Rick Sheils did a review of all 3 irons (steel shafts) and provided spin rates, clubhead and ball speeds, carry and overall distances. You should check it out. He's not sponsored and he absolutely loved the irons. He definitely had a preference though two of the models performed extremely similarly as far as spin rates and distances were concerned. The look of the irons are amazing, whichever way you go. Good luck, Grant. Hopefully this was somewhat helpful. I was a club fitter back in the late 90s thru the mid 2000s, when we didn't have the tech they have now, so you really had to know your stuff. The other thing i should mention is torsional stability. That's the twisting motion of the shaft at impact. Steel tends to have less torsional movement, making shots more consistent directionally. Lastly, Phil has psoriatic arthritis. He's likely controlling it with meds but as a sufferer myself, it's an extremely painful condition, meds or no meds. That might be the reason he's playing graphite shafts. It's a good resson. Especially if you want to avoid these types of ailments down the line

[@PetSKi67]

@@dinosaur6756, and the swing weight depends on the static weight as well. With heavier shafts it is tougher to get the clubs feel more head heavy and it depends on the clubhead weight and how much extra is possible to put in the head. The traditional scale is intrestingly still in use, yet frequency matching is also available. Had a set once with graphite going from E to C every other club, and the clubsmith was stunned at first, but put them into frequency analyzer and heureka! The clubs were frequency matched and felt really solid and similar all the way thru the set. That said, I am puzzled, that the old alphabet+number ancient scale is still in use today.

[@nelsonjames1272]

I had the exact same problem that Grant describes with his feet a bit open and trying to feel a fade instead of getting stuck in a hands like draw feel. I believe it’s just a natural development in a golf swing and you need to go with it and not fight it. Fade fade fade.😊

[@DanWessonSpecialist]

I’ve had the Takomo 101T with KBS Tour shafts for 2 years. They work as good as any and are clean looking. I had them made 1° flat and 1/2” off length for my height. I like a smaller head like the 101T. I hit a lot of range balls. The grooves are not holding up like other brands. Softer metal I would assume. Not sure if the spin will hold up. The 101T look exactly like a Taylormade P series iron with a different logo. Customer service on a number of questions since I’ve owned them have not responded. They did once when the clubs came in with box damaged and a grip torn from a forklift fork thru the box. There response- not our fault. I changed the grip and went on. Head separated from my shaft on a club. I needed the tip size and emailed. Zero responses. Took 9 weeks to get my clubs also after the credit card cleared day one. Basically I was funding their orders.

[@MidwestFarmToys]

Well that's what you get with startups. They probably did not expect to get that popular that quick and are probably swamped

[@PJo336]

Yeah my order took 12 weeks and their support responded pretty douchey when I asked about it. I just did midsized grips and 0 other customization which was enough to take 12 weeks and couldn’t be cancelled and reordered with stock grips

[@RJ_S_182]

Speak to Grant, he is the "owner".... The wear is concerning to me, i have had my JPX 825 for about 10 years now and i play alot... As you can see, i dont buy clubs every 2 years like these guys, golf is expensive enough as it is, but my clubs are still perfect... yes they have a slight wear marks but nothing that would make me second guess the quality of strike... so the idea that i buy cheaper clubs like these that wont give me 10 years like my Mizuno irons is concerning... All the you tubers with brand deals are getting new sets frequently, so for them its a no brainer, but im wondering if this would be right for me... i dont mind the shitty service, i will not deal with them in any case once i receive them, i just want them to last

[@benmm2044]

@@MidwestFarmToysgetting swamped with orders is not an excuse to have bad customer service. If you are swamped that means money is coming in, hire people to answer customers.

[@DanWessonSpecialist]

When they began they processed credit cards then we funded their orders. How about a company have money before they buy Chinese clubs and not use mine. Maybe they got better. Ever been to that Promo site. Oh boy. No stock in many sizes for 9 months. As far as Grant, he has no management experience and could care less as long as a check comes. I doubt he owns a percent enough to even open his lips. “Hey Grant want fund our company and be an owner. I’ll give you x% for xxxxx amount of money and you be a silent partner.” Does anybody think a company that starts on it’s own needs Grant other than for advertising views? Think about it.

[@MatthewDunne93]

Big shout out to elite fit golf for fitting all your new takomos also Grant, he does awesome work and a very enjoyable channel to watch also

[@bobsofia68]

Bryson plays graphite shafts in his irons ... he swings pretty fast I'm told. Don't fall into the old way of thinking about graphite iron shafts, the technology is worlds away from where it was in the 1980's -90's. What ever gives you the best dispersion is the shaft you should play.

[@BOnYTB]

Ridiculously helpful comment section. Always liked that about Grant’s channel. People are always willing to answer questions from their experience in a civil manner. Obviously it’s still YT so nothing is perfect but this is an above average community no doubt.

[@solson223]

I bought the 101Ts last year and played a few rounds with them. They just didn't have the feel I was looking for. It's definitely not the club though because you are striping them and they look amazing. Congrats on the new company ownership Grant. 👊

[@Golfing-AddiCt]

There is a big difference between being the owner of the company and being a share holder in the company. The CB's look the business... As for what you should go for 6-4i they are longer clubs a fraction more difficult to hit purely, especially from irregular lies out on the course, I'd suggest you use what ever is easier to hit. I've never heard someone say damn it this club is to good, I need a tougher club to hit to make it harder. 💭💭

[@johnmoon9143]

@@Golfing-AddiCt being a shareholder is the same as part owner. Even if it is 1% ownership, still part owner is technically right. 🤷‍♂️.

[@JonCuEDC]

Using that logic, I just want everyone to know I own Apple, as well as Google and GameStop.. 😂

[@Rvbeus]

Played Mizuno mp32 for like 10 years. Just switched to 301 Mb/Cb combo set. Pw-8 mb 7-4 cb and man does it feel pure. Mizunos are known for their feel, and after 10 years of only playing mizunos ive noticed no difference in feel. Incredible feel and that signature pure flush when you strike them in the center, that players irons give you!

[@geoffdrew5207]

A pro like Grant may have a different experience with a set of clubs than a weekend golfer. I use Tacoma 201's, when I swing well they are extremely nice but I don't find them particularly forgiving. It is very easy to move the ball left or right with them. A friend just bought a set of 101T's and is having even more trouble hitting them, when he hits them well he loves them but has no confidence in the shorter clubs.

[@nickj1663]

Grant please don't mess with your natural swing mechanics chasing a fade. Have the fade in the bag, but only use it when need be. Your swing is gorgeous and very sound and will stand up under pressure. When people try to move it the opposite way to what's natural, this is where things go majorly wrong. Ask Victor Hovland.

[@gregorybolin4672]

Hogan would disagree

[@BOnYTB]

@@gregorybolin4672according to Gary Player, Ben got the worst yips ever. So maybe not the ideal person to model after 😂 No disrespect to the legend. Just had to point that out because I had no idea until that recent video.

[@gregorybolin4672]

@@BOnYTB full swing yips? Putting ? That's always Ben bad.

[@robgom777]

I was always a Project X 6.5 or x100 guy. I tried the MMT graphite shafts once and I was hooked. Better feel with very similar performance.

[@alexbutterworth4679]

Grant as an owner push for them to offer more mixed sets. I know I speak for a lot of golfers in the 5-10 handicap range that would love to mix the 201s with the 301 CBs or the 101ts with the 301cbs. Unless you scratch or plus handicap the current 301mb cb mix is a hard sell

[@TheSlickDonovan]

Think you should do the 101T in the long irons. More and more tour players are doing the same going forgiving in long irons and I think it will really be beneficial to you and give you the best of both worlds. Also the 4 iron being a ulitity 101T wouldnt be too bad either get a graphite in there or your $ taper! then regular 101T in 5,6

[@calebbarnes6071]

Grant, love this channel and the amount of conversation and learning that happens through it. Can you help us out on how you score inside 100? I’ve seen chipping lessons from you and some other stuff, but I haven’t broken 90 yet, and I seem to average 4 shots inside 100 or less and know that is killing my game! Love your work and thanks for all you post!!

[@toddholl8881]

I love the feel of graphite shafts in irons! Allows me to feel like club head better!

[@Glipglop886]

Honestly I forget how good Grant is at talking through his mechanics. If KZbin doesn't work out for him he would be a top tier coach for amateurs lol

[@JeffPassageCPA]

Grant already IS an instructor.

[@brawrecords]

I had a set of one of 101t about eighteen months ago. Look great. However, I just did not feel I got the distance with them. I felt like they were five percent behind another brands. The shaft options were pretty limited as well. The import tax was another downside in the u.k. They were something like £580 but tax was £130. You are not far off being able to get top brand irons after a year of release for that amount. Plus you can probably get them fitted. That said. D2c It's definitely a way forward. The key for these companies will be coming up with new and innovative ways to make sure people get fit into the right clubs. Whether that Is online video fittings... who knows.

[@TESLAenjoyer]

They’re a little too lofted for a players distance iron

[@bobbys4327]

I use the Recoil graphite shafts in my Mizuno MP-54 forged irons and I love them. Went to graphite long ago because steel gave me golf/tennis elbow. Graphite stopped that.

[@francoisdesmoulins-lebeaul4273]

I've been playing Takomo irons for the last two years (combo set CB-MB) and relate to a lot of what you say (albeit, I'm "trying" to play a fade... ), but you won't convince me to drop my 301CB 4i for a 101T... These things fly too high and go too far! (plus I'm not totally sold on the sound, too). Welcome to Finland, Grant!

[@dinosaur6756]

You could always play the more forgiving model (101s) in the longer irons (4-6) and the cb's from 7-pw. I was always a proponent of finding wedges with similar weights as the rest of your irons. Some of these modern wedges are pretty darn heavy.

[@knee1499]

Grant, since you are maybe looking into graphite shafts - maybe try the Axioms? You don't have to try as hard to add spin to the ball and they are incredibly stable/accurate

[@randallking2250]

I have an older set of graphite shafted G5 Pings with Golf Pride CP2 wrap jumbo grips and I love them. Would love to try the Takomo's. I would like to buy an individual 7 iron to evaluate them. Love your channel, always look forward to each and every video. Congratulations on your partnership with Takoma!

[@monk3608]

Ive been following Takomo since they were introduced and they look amazing. Reviews are really good as well. Congrats

[@johndomutz1052]

As a part owner, can't you get sombody at Takomo to come out and fit you? If not, that is a GAP you might think about filling in the future: Takomo fitting centers...

[@CBREWER85]

Just ordered the 56, 60 wedges. Excited to see how they feel

[@Pud56]

I was fitted into graphites a few years back, felt they were a tad spinny, so last year mentioned this in my new fitting, hit KBS steel 95g shaft, lower flight, longer and much better feel. So I am back in steel shafts and loving them

[@johnmoon9143]

why are the 201's not considered? Either 101 or 301cb?

[@ColdxBlooded]

they are described as for players with higher handicaps.

[@MilesVP16]

@@ColdxBloodedno 101 are for the highest then 101t then 201 then 301cb then 301mb

[@johnmoon9143]

@@MilesVP16 - yeah was curious why grant is skipping to 101 instead of 201? I am guessing it's similar to? 101 - p790 201 - p770 301 - CB

[@bmlaforge]

@@johnmoon9143 Because the 201 are ugly

[@MilesVP16]

@@johnmoon9143 it’s more of a 101 - 790 101t - 770 201- Cb 301cb - P7mc 301 mb -P7tw I’ve hit all the irons and that’s my closest, used to game the tws but just moved to the blueprint ts

[@psilver063]

I find it fascinating how golf is reverting to heavier head feeling so you can feel the head weight when swinging. Those graphite shafts are the way to go if you like feeling weight in the swing. GH isn’t built for the graphite shafts. Needs to pump some iron 😂

[@tommarks1039]

Thanks for testing out the graphite shafts!

[@56dlp]

Bought the 301cb heads last week. Can't wait for the fitting!

[@bp8067]

Graphite is less stressful on the hand and elbow joints. I really like my Steel Fibers

[@cace81]

Love your content but your take on the MMT shafts is way off brother. You didn't give us any context as to weight or flex of the shaft. I was fit into MMT 105 stiff shafts recently and they perform really well compared to the steel shafts I gamed previously. To each his own but if Phil is hyping them up, Bryson games them, etc. they might be worth a little more consideration. Aside from that, love that you're an owner now of Takomo. I just got a set of 301CB's and they're amazing.

[@mikecoughlin4128]

I was taken aback when he said graphite is kind of a new thing. I told myself he must not have meant that literally. Must have meant that in terms of pros or something. I and a buddy built ourselves a set of clubs over 25 years ago with graphite shafts and used them for years. He handed his down to his son who still plays them as an occasional golfer.

[@roofna]

Grant, you should consider the 201cb's for the 6-4. They are forged with a bit of forgiveness that should fill the gap nicely while giving you slightly longer shots than the 301cb. I just got my 201's in recently. Can't wait to hit the links when it warms up.

[@brianjohnson8918]

I got into a partial set of Miura PI-401's last year. Very spendy, can't recommend them to as a 'good' option on that basis, but was able to get them thru a club fitter, which is a big deal when looking for your "last" set.

[@karlcoke2309]

I play the 101T and the Srixon ZStar ball and have found my spin rates are such that the ball stops where it lands. It allows me to play to a number and not worry about release. I would definitely go with them in 4, 5, 6 assuming you can get your gaps right.

[@gregpare6]

Really need that putter to finish up my Takomo set. 🙏

[@D-Moe909]

So awesome to see your hard work payoff. Can’t be more happy for you. Although I don’t know you it is still awesome to follow a golf content creator and be happy for their success. Great job, enjoy everything in life bud.

[@silverfox4898]

Biggest complaint I have with golf equipment is the outrageous high cost....Still using a TM Nubbins putter because who wants to spend $350 plus on a dam putter. Like TM equipment but they don't like me with cost like that. Glad to see a set of clubs that are affordable by Takomo.

[@robertnelson2719]

I love the look of the irons (and of course the price) but any serious golfer knows you absolutely need to be fit for the clubs and that is the downfall of Takomo. How can I hope to buy a set of irons online without hitting them? I can order the heads then get fit for shafts and grips, but that will cost nearly as much as buying name brands locally. Surely as a quality golfer you can see the dilemma. Any ideas forthcoming?

[@MikeActual21]

Great video and insight! Loving this second channel, keep em coming Grant!

[@willlazenby1050]

I think the biggest surprise to me is that Grant hasn’t ever hit a graphite shaft even just in a previous iron fitting.

[@hartattack0725]

I bought the 101T's last summer and have loved them

[@davidtomsett]

The pros get so much height on their scoring clubs, that, combined with spin, gets them staying closer to the pin.

[@jimreynolds2837]

Can you do a video showing pros and cons of using a blade and mallet putter?

[@WhatTheCroxxx]

Ive got a set of 101s and as a beginner theyre fantastic, everyone who has touched them has loved them.

[@timothyliberatore3730]

Ordered the 101s last Friday and they're supposed to arrive this Saturday. Looking forward to trying them out this year.

[@UraniumAtom]

I find with graphite shafts that my head control and awareness is a lot easier. Plus they're lighter and easier to swing for my lack of muscles. An extra stiff graphite shaft would probably be similar to a stiff steel shaft.

[@chrisb9478]

Congrats! Please offer graphite shaft options 👍🏻🇺🇸

[@Confessionalgolfer]

Congrats! Have been thinking of giving these a try.

[@Tim_Ruiz13]

Actually disappointed he didn’t hit the 201’s bc I really want to buy some Takomo’s but I’m stuck between 201 and 101T. I’m long with my irons and I’m a 7.1 hcp but not sure if I should try and make golf slightly harder and go 201 or have some more forgiveness and go 101T

[@tjintown]

I bought the 101 irons with the Atmos Red shaft last year. I really like them! So glad to see you are involved!

[@GoBlue6745]

how is the wear on the face?

[@Stank_Johnson]

I just got their combo set. MB's PW-8. CB's 7-4. Love.

[@asagers]

Curious why you didn’t try the 201s?

[@chriswhalley8317]

I ordered them in December.... I was thinking the same 😅

[@jefformsby5604]

I just got a set but I haven’t hit them yet. Heading to my sons soon to hit them on his simulator. Can’t wait. I may have made a mistake on the shafts though. I went with the KBS Tour lite stiff. Any feedback with reference to using standard weight vs the Tour lite?

[@ryderbrunken]

@@jefformsby5604 I also went with the 201s in the Kbs tour lite, ive only hit on a simulator but they seem to work well for me, I have a pretty moderate club head speed aswell more focused on tempo than anything else.

[@asagers]

I’ve been playing them for over a year. Had my best season last year with them, they are fantastic! I have the KBS Tour 120 stiff shafts. My previous clubs had DG S300 shafts which were heavier and stiffer. I referred to the KBS website where they have a shaft selector page based on your 7 iron swing speed. Ended up being perfect for me, I love the feel of them.

[@seancobb7653]

201s are Takomos version of a game improvement iron. Not designed for scratch players. The 301CB/MB are their players irons.

[@16pennynails]

Nice cb's, are they really any better than those sharp looking p7CB's? For a suggestion on what to use make sure it's the clubs that work on an average or even below average day not just the best swing days. You may want to explain to people why you build up your grips like so many of us do, there was much controversy on elite mobile's video about building your new irons. Thanks

[@thomasching46]

The pricing for Takomo's in Australia isn't very attractive after tax and shipping. High handicapper TM irons e.g. Stealth irons, Qi10, M4, M6 are actually cheaper than the 101's. With the 301's there is a slight discount vs 770's P7CB's etc, but not attractive enough. Any chance Takomo will review Australian pricing on these clubs?

[@jamesjames369]

I am almost sold on these clubs…just waiting for Grant, George or Wesley invite me out to a fitting…LOL

[@MrMuthachugga]

Maybe try like a 3 or 4 iron in 101t coule be a weapon on par 5s especially if they going 10 or 15 yards further than CB counterparts. Also in pretty sure takomo has a utility type iron maybe a 2 iron. Could be worth checking out

[@EXTRON240]

Grant hit Phil's left handed shafts pretty well for a righty

[@toddwelch486]

This is the best your swing has looked!

[@MrJohnr47]

I would think about the 6 iron being the 301cb. Help you move it around a bit

[@atgrints]

I don't see you approaching with long irons very often so I'd say go the mixed bag

[@richardboag8827]

Picked up a set of Takomo 101s for my first irons last season after my starter Top Flite Men's set. These Irons are amazing and more than half the cost of TM or Titleist. I had mine extended and lie angle change, $700 for 4i-PW. Can't be beat

[@barneystone1715]

Yes, they are good value irons. I went with PXG for $ 99 a stick ..great irons as well

[@alexbrowngolf]

This is insane to see. Even the ad before the video was grant putting an iron back in his takomo bag

[@hanknorton3150]

Question Grant - When you are hitting the graphite shaft well is the clubface more open or closed at impact than the steel? Other words is the flex in the shaft bowed away from or toward the target at impact? Gr8 content. I watch them all.

[@JoeySouthpawGolf]

Just bought my 101’s can’t wait em to come in brother! 🤙🏻🔥🔥🔥🔥

[@JoeySouthpawGolf]

I also plan on grabbing some 101T’s bc I see a benefit in throwing both mixes in the bag

[@jglowe74]

Good for you, Grant. I recently purchased the 101s in graphite and they're absolutely money. I get they are 2-degrees less per club than my Mizuno JPX921s, but the contact is butter. Love them and would highly recommend the quality of Takomo.

[@GoBlue6745]

how is the wear on the face?

[@toddaman2229]

Go with the 101t for the 4-6, or 4-6. I play the 201’s and love them!

[@Popusimy]

I had no idea this kind of book existed The Censored Guide to Wealth on Bovolorus is wild

[@Speedy28Gonzales]

Wut

[@ColdxBlooded]

bought 101t a few months ago and they feel fantastic, feel as good as any top of the line irons out rn, the only thing in my opinion that i have to wait and see is if the lifespan is dependable. hoping for the best because if so the company is awesome so take the risk and buy now seems like this brand is only goin up.

[@CharlesFox-xl7pm]

Suggest 101T in the long irons but you would need to get the lofts adjusted so they would go the same distance in between irons as the 301CB irons.

[@805kong1991]

I bought the 101s about a year ago and i love em. Good irons

[@Jrgoldenbear]

Pretty amazed by those fades

[@Pazuzu158]

Congrats grant .. Would love to see tokomo release a left handed utility iron in the future

[@Hazzo88]

I use the MMT 125tx and its WAAAY stiffer than steel

[@willthrower2380]

As a 15 handicap I’m leaning towards the 101s. What do you think about shaft choice. Appreciate you!!

[@Three-13]

GRANT IS ROCKING THE SUN DAY RED SHOES! Why did you decided not to try the 201's? It often times seems like the 201 gets left in the dust and people make the move from the 101T to the 301CB. What's your thoughts on that?

[@jindabyne9823]

My takomos arrived tomorrow so stoked with how they look! 🎯

[@TuMadre1337]

I'm using Axiom 105x graphite shafts in my irons, love that there is reduced weight and vibrations but keep the stability of a heavier iron.

[@jjoddo4530]

Basically an entire video of Grant just talking to himself and we're the audience🤣👍

[@robgom777]

Not sure which one you used but the 125 TX is what is comparable to the money taper

[@andrewyoon9620]

loving the fade shot grant!

[@jamesdonaldson2257]

STRIPED. As an owner, please convince them to allow combo sets to be builtttt! I emailed them about a 101T and 101 combo set, but they said not yet😭 Maybe you can get something going before I order in April🤣👏🏼

[@strisrobith4782]

You could adjust the lofts of the 101T to fit the lower end of the set.

[@zigazackwrx17]

You should do a video on the Takomo Obsidian graphite shafts...there's no info on them anywhere!

[@rockett9053]

You should go with the CBG graphite, more forgiving irons

[@terryhurley1362]

301MB... I'm sure you will do a hybrid set!

[@JL-qf3hq]

101Ts for long irons, it’s not about how good your good shots are, it’s about how good your bad shots are on an off day. The 301s will just magnify variance and be extra punishing on bad days for incrementally more workability on good days. Not worth it IMO.

[@TonyP-ft1tu]

I ordered 101T’s 3 weeks ago. Waiting for them to come in!

[@PRYVTgomerPYLE]

I have played graphite before. It ballooned entirely too much for me. Lost yardage. However, I can generate some crazy spin sometimes! 🤦‍♂