I played a guitar whose inside was solidified with candles.

Рет қаралды 85,056

Күн бұрын

Пікірлер: 230

@squirrel-1969 Ай бұрын

Super fantastic restoration/custom mod! Using the laser cutter to engrave your logo and make a custom pickguard took this project to another level! It's nice to see you take the time to give guitars ready to be thrown away a second life!

@jmpmusicve 3 күн бұрын

What a beautiful job, it is incredible how you give life to those guitars, congratulations on this great restoration

@AS__77 Ай бұрын

That Creality machine is cool! Love the new logo process on headstocks, too! Looks great 🎉

@kurokuroe6451 Ай бұрын

個性的すぎる素体ギターだ

@madaura4208 Ай бұрын

R-E-S-P-E-C-T ! I really appreciate who takes care of used guitars.

@hydeaspire1 Ай бұрын

I’m wondering how this sounded when still working, reminds me of EVH’s tone chasing on the frankenstrat. Active pickup circuit and wax potting the whole guitar to prevent microphonics.. Seems like the old owner was chasing a very particular and individual sound. I bet this was a beast in its former life.

@solarismoon3046 Ай бұрын

Until whoever put all the wax inside got a hold of it!

@junksmith_wizard 18 күн бұрын

@@solarismoon3046the wax probably wasnt there for looks sake . The guitar even had a opamp circuit or some sht. IT OBV SOUNDED UNIQUE

@akakage390 Ай бұрын

蝋で固められているだけでもインパクトあるのにサザンクロスは流石に不意打ち過ぎるｗ

@ezeriamoore Ай бұрын

I love your videos. You give new life to trash guitars. This one is special. I like your experimentation with the laser cutter and the wood stain. Beautiful.

@AlexandreF.Hampel Ай бұрын

Congratulations man, of all your videos I've watched, this one was without a doubt the best! Wonderful work!

@russellmorgan5611 Ай бұрын

The combat style ASYL IS a bit strong. The lower case"a" pyramid logo would be enough. Not sure about the two piece scratch plate. Enjoyed watching it anyway. Great work. 👍

@TheHamnicam Ай бұрын

やべえ機械登場した。

@DoctorBollocks Ай бұрын

You've done an excellent job. Especially refinishing the headstock. Good work.

@wyattsdad8561 19 күн бұрын

Man, that headstock looks so smooth it’s yummy.

@washi555666 Ай бұрын

毎度どこからこんな感じのギター見つけてくるのか

@smokinvalves Ай бұрын

He creates them. I became suspicious some time ago and since then it's only become more obvious.

@juancarloscuaocastellanos8813 Ай бұрын

Flea market, I presume. 🤔

@岩田邦彦-b1q Ай бұрын

ギターの墓場から掘り出してくるんですよ、きっと

@shiraga0516 Ай бұрын

@@岩田邦彦-b1q 黒魔術やん（笑）

@Sammywhat Ай бұрын

Outstanding work! Love the creativity in both the design and your playing! Cheers!!

@liviorock2026 Ай бұрын

Woooooouuuuuu!!!!!!!!!!!!! Spettacolare tutto il viedo è una strada di meravigie una dopo l'altra il risultato laschia senza fiato e a bocca aperta stupendi come sempre i tuo lavori da sballo Sinceri Complimenti

@MaskedRiderChris Ай бұрын

Again, your prowess of guitar necromancy shines as only you can make it shine! That went from being a piece of junk to a piece of art , and that's a very impressive engraver machine you used in this project, too. Excellent work! 繰り返しますが、ギターのネクロマンシーの才能は輝いています。それはジャンクから芸術作品に至るまで行きました。これも、このプロジェクトで使用した非常に印象的な彫刻家のマシンです。素晴らしい仕事！

@wyattsdad8561 19 күн бұрын

It would be cool if you had subtitles so we could read what certain products, equipment, etc is. Beautiful work!

@dominictohill4322 Ай бұрын

Thank you for another amazing restoration. I really do enjoy watching you work.

@dougstanley7662 Ай бұрын

Man for a dumpster fire of a guitar that turned out really nice.Fine job Sir.

@tmcm1968 Ай бұрын

One of my favorites you’ve done so far

@juanrrodriguezBassist Ай бұрын

one of the best jobs you've ever done

@Chuck1798 Ай бұрын

Very good work on this old customised Strato. The pickups are quite goods ❤😊

@joepaskowski9091 Ай бұрын

Wow…that went from ruined to an absolute professional level instrument!

@shiraga0516 Ай бұрын

プリアンプ内蔵でザグリごとロウ漬けかぁ。クリエイティブだなぁ。

@OscarAndres_214 Ай бұрын

great finish! love the wood pickguard and logo engraving. great job!

@robertbeer2584 Ай бұрын

I have watched alot of your work, this by far is the nicest.... great work... thanks from Canada

@ilovejapanesemusic3858 Ай бұрын

It's too bad you weren't able to determine the brand, but I love that it's your brand now!🎉 The headstock looks fantastic! That laser machine is amazing!👍🏻😂 All the other parts to cut out with it or perfect 😉

@mixentrik Ай бұрын

Another amazing restoration from the Guitar surgeon general studio Asyl! What a beautiful guitar it turned into. I was so heartbroken 💔 to see the condition it came in at the start of the video! But You are an amazing guitar doctor! Love your work ! ❤❤❤ Some nice licks there at the end 🤘🤘🤘😎😎😎! Also, can I have this guitar? 😅😅😂😂

@JohnBaker-vm1wf Ай бұрын

Another beautiful transformation!

@jscan Ай бұрын

good idea with the gloves man, I've never seen a more toxic guitar!

@rogersgonc Ай бұрын

Turned out to become really awesome! Great work!

@dbsound882 Ай бұрын

This one was really very cool, way to go.

@antsleep Ай бұрын

nice to hear some Karate riffs. excellent restoration.

@osamadessouky802 Ай бұрын

I wish you would annotate on screen what chemicals you are using to strip and remove paint etc, since all the cans and chemicals you use are in Japanese. Will help your wider audience. Great work! 👍

@rossmiller7778 Ай бұрын

Way more new parts than normal. And brand name strings😊

@blacklikethesun Ай бұрын

One of your best

@cowboyconey Ай бұрын

This one is a nice level up for you. Really nice results. Cool new toy.

@edwinh7908 Ай бұрын

Awesome As Always!

@satoshimori2380 Ай бұрын

電子回路では、防錆、防湿、防塵、防振等を目的に、ロウで部品を固める事がありますが、その目的でしょうか。入っていた回路は、トーンコントロールの様なので、気に入った音を出そうとしたのかも。にしても、弦のテンションどうしてたんでしょう。ともかく素晴らしい再生です。

@e-gitarristalexsweet3889 Ай бұрын

You has done a very good work... 👍.... ROCK ON 🤘

@andrewpartington7274 Ай бұрын

Your finish work is excellent!

@emiliojosegraobenedi450 19 күн бұрын

Impressive work!! A beauty!!

@carlyoung6561 Ай бұрын

Excellent job, video, and playing! WOW!

@skalewilly Ай бұрын

What an amazing job in this guitar!!! Congrats!!!!

@BBQ1953 Ай бұрын

I’ve watched several of your videos, so far. I am shocked at the condition so many of the guitars are in when you receive them. I don’t understand how people can treat their guitars as if they don’t like them. I appreciate the meticulous patience you use as you restore those guitars and how beautiful they are when you complete the work on each one.

@TeleCaster66 Ай бұрын

These videos are fake my friend, he does this to the guitars himself.

@BBQ1953 Ай бұрын

@@TeleCaster66 Evidence?

@PHILCOLLINSism Ай бұрын

lol that’s a lot of effort just to fix it all. I smell bs.

@angelonemo5551 Ай бұрын

THE MASTER AT WORK !!!!

@morrinsville23 Ай бұрын

This is what a relic'd guitar should look like

@sergiomastriaco8960 Ай бұрын

Si las velas eran de parafina... tiene sentido. Eso es exactamente lo que se usa para inmovilizar los bobinados de los pickups de calidad... ahora, la mano de obra parece un tanto rústica... Drácula me daría menos miedo...

@juninhocisco5135 Ай бұрын

Parabéns pelos trabalho! Projeto limpo, agradável, de muito bom gosto Eu gostaria de ver você ajustando o braço e ponte Parabéns pela dedicação!

@LeonardLangford Ай бұрын

I would be proud to own it

@PedalEffects Ай бұрын

Hiciste un gran, gran, gran trabajo. De los videos que he visto, en este has hecho una reconstrucción mayor. Te felicito, tus habilidades van creciendo y estoy seguro de que seguirás ascendiendo en este camino, cada vez con más equipo, más técnicas y más creatividad! Súper!

@donnieellis9305 Ай бұрын

Gave a whole new meaning to Wax Potted Pickups... lol Excellent work and an awesome end result! Cheers!

@rockdfunk Ай бұрын

amazing transformation

@projectox.x Ай бұрын

Com habilidade, conhecimento e ferramentas certas, até parece fácil.. 👍👍👍

@RZLAND Ай бұрын

I enjoy your channel. You do very nice work. Thanks.

@bamboozledbox Ай бұрын

I've enjoyed watching how much you've grown with this craft on this channel, you do excellent work. This one turned out great and loved the creativity with it!

@tensixtythreecomics Ай бұрын

Looks amazing! Great work!

@terrybotts2109 Ай бұрын

excellent job

@pony-boy3822 Ай бұрын

Literal Frankenstein at first reveal!

@RevGerryRM Ай бұрын

Excellent job 👏👏👏👏👏

@leokrissandy5579 Ай бұрын

nice pickguard and i don't know if it's the pickup or the wiring but that guitar sounds really good

@コップカップ Ай бұрын

完成するギターのイメージはどこから来るんだこの人は…

@stevanrose7439 Ай бұрын

I just got a used fender and it’s in pretty bad shape I’m gonna try and bring it back to life.

@Ho2Seine Ай бұрын

Super mon frère un génie de grand art ❤️🤘👍

@gc6391 Ай бұрын

You made a beautiful guitar. But, you could have created your guitar from a new cheap guitar. The original guitar was also cool and just needed your TLC to get it running again..

@frankburcham6991 Ай бұрын

I think you should have glossed the face plate and put in a clear scratch plate on top. Install matching stainless screws. But it do look better then the I don't give a snhit what it looks like punk rock vibe it started out with!

@hpblack1953 Ай бұрын

There are some sick puppies out there who treat guitars like they are disposable, like toilet paper. Great job bringing this poor thing back to life. Bravo.

@joseribamar5556 Ай бұрын

Ficou top demais,seus trabalhos são muito bons

@goodjoe6410 Ай бұрын

エフェクター仕込んであったのか？色んなパーツがもやもやするなぁ

@thomashalley7258 Ай бұрын

Wonder if it would have worked with a new battery at the start? Crazy what some people do to guitars.

@well7464 Ай бұрын

After all, there's something wrong with the sound. The thin strings are not sonorous. And there are a lot of dirty overtones on the high Gain. Try other strings instead of the Elixir. But the guitar is beautiful. Great job.

@mdrumt Ай бұрын

Laser engraver is so cool! Now how about that Ultrasonic cleaner for all the metal parts? 😊

@robertopreatoni Ай бұрын

Nice job, I would have used golden screws and mechanincs instead and build a better shielding as it is really nosy. I also have a laser engraver and I use it a lot for my guitars :D

@shaunstephen9761 Ай бұрын

Beautiful!

@Metalcop5150 Ай бұрын

建設的な批判を一つ。トレモロのバックプレートの木目を垂直ではなく水平にすべきでした。全体的に素晴らしい仕事です! あなたのチャンネルを本当に楽しんでいます。 🤘😎🤘

@ARWest-bp4yb Ай бұрын

Superb work my friend!👍👍

@astu.pradipta Ай бұрын

amazing man👍

@StephenLight-oc3tl Ай бұрын

So beautifully done. I would love to play that.❤

@m.r.vanderburgh3757 Ай бұрын

It looks beautiful!!! But you didn't level nor re-crowning the frets. Nor adjusting the truss-rod. Only buff it up. Why???

@ast3663 Ай бұрын

haha, the modder obviously just tried a ' pickup waxing' but inside the body itself..lol but I like when somebody does his own mods like the electronic circuit board in the back..the original parts like tuners/bridge/cheap body wood suggest this was a cheapo guitar

@Stoobers Ай бұрын

Excellent job... I love it

@luuluuluu333 Ай бұрын

ピックアップのポッティングでノイズ対策をしようとしたんですね笑発想が大胆すぎる…クリエイティブ😆

@RobDay69 Ай бұрын

great video as always, the ONLY thing i would have done different is put a new BLACK nut in, instead of using the worn out old white/cream one.

@llojdmorgan3224 Ай бұрын

It's. Just. AWESOME!!

@madmadoka Ай бұрын

ピックアップをロウに漬ける（ポッティング）とハウリングしにくくなるのを聞いて丸ごと埋めたんでしょうかコイルの部分にロウが入るのが重要なのに

@erickoliveira7039 Ай бұрын

*Essa guitarra estava Nojenta 😱😱😱😱 Ficou extraordinária depois do Trampo ! Parabéns 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 😃🙋🏻‍♂️🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🎸🔥*

@solarismoon3046 Ай бұрын

You put expensive USA MADE pickups in what is essentially a garbage guitar. Good job! Those pickups cost more than the entire guitar is worth.

@cawfeedawg Ай бұрын

Gorgeous!.

@maxbar64 Ай бұрын

Good work but I would have changed the frets and not just polished them; the knobs are awful and while you were at it, you could have painted the jack plate black too. Of course it's just my opinion :-)