I rebuilt my BMW e92 and now it’s dead again.

In this gripping video, join me on the rollercoaster journey of rebuilding my BMW e92, only to face the heartbreak of a non-responsive engine. Witness the anticipation as I meticulously install the freshly rebuilt engine, pouring hours of effort into the restoration. However, the thrill is short-lived as multiple attempts to ignite the engine prove futile. The frustration and determination unfold in real-time as I troubleshoot the issues, capturing the highs and lows of automotive restoration. Buckle up for a raw and authentic experience as I navigate the challenges of resurrecting my beloved BMW e92, only to grapple with the unexpected..
Check out my Instagram: / emsgaragee61

[@EMSGARAGEE61]

Sorry for the bad quality, the video is being processed

[@louieystberg]

N43…. Verdens største drittmotor. Har skrudd mye på de. Elsker bmw, men holder meg vekke fra 4cyl bmw… godt jobba, du gjør en god jobb 👌👌 kjekt og følge noen lokale

[@tuffgong3248]

I agree i had several. But the 4cilinder diesels are good.

[@zach.avenarius]

bro keep it up, your ability to talk to the camera comfortably and articulate is what kept me watching👍

[@JohnEvans-ct6mz]

Anyone that has built engines knows your pain brother. That oil separator is very common. VW Audi uses a similar setup. That rubber diaphragm regulates the vacuum in the engine. The cap that goes over it has a tiny hole for fresh air. When that diaphragm cracks, it creates a vacuum leak causing the misfires and won’t allow the PCV system to do its job. I hope the oil pressure issue is something simple like a check valve or something out of position.

[@BigHumz155]

Dude 😭 I think I would have just swapped an N52 in there man, my N43 had endless issues and I was so close to throwing it away and swapping one in, but then it decided to catch fire and take the car with it hahahahaha

[@DannyBoyGhost]

I’m so glad I didn’t know what I was looking for when I got my 2006 325i an ended with N52 cause if I did know my dummy self would of ended up getting the N54 only cause the turbos but once I did all my research and seen all the issues they come with I was like I’m glad I didn’t discover that engine cause that would been a bad choice haha

[@DannyBoyGhost]

lol 1 thing I’ve said are cars hear an know when we ready to replace or tired of there shit long story short back in 2022 of June my 2011 maxima got totaled well 2 months prior before the accident I was talking an looking for Mercedes even going to dealers to checking them out haha once the accident happened I was like my car was not happy at all I was disappointed too cause I put a lot of money in to it within the 2yrs frame before the accident so I was kind bummed out for sometime

[@bonafide9085]

I have E90 with N43 engine, and it is a nightmare. I took it to the mechanic with low oil pressure warning, first they replaced the oil pressure control solenoids, then I had to bring it back, then they said the oil pressure sensor is bad, they replaced, then they realized that the timing chain is stretched and hit the plastic timing chain tensioner which broke and then the small plastic fragments clogged the oil pump causing the crankshaft and its bearings to die. After this I will buy electric only. It is exhausting just to think about how many things can go bad in an internal combustion engine. Anyway, the content is good and it made me realize how many tools I would need to fix the engine myself. Thank you for sharing!

[@geekonometry]

my guy!, your content is like having a BMW shop teacher. I didnt know anything about BMW at all. Your channel is giving me that knowledge. Im an Audi guy, i drive an Audi and stuck with them and they have just as many faults and small things that can stop mechanics from fixing them. Through the love for cars we learn, what you learn on your end will help people learn from their side. Dont be discouraged and keep it up. Loving the videos, you say bad quality some times, from my end its not even noticeable

[@EMSGARAGEE61]

Thanks man😊, maybe an Audi some day on the channel😎

[@kevinasmykolas719]

​@@EMSGARAGEE61 Buy an Audi a6 c6 and try to change the timing chain's, would be an interesting idea for a video, btw, Geras video, sėkmės darbuose!!

[@EndstyleGG]

Love the videos, just a tip, render the final video in 4k (even if you don't film in 4k), the quality from the bitrate increase it quite noticeable. Also it helps to unlist the video until in fully renders, people might click off the video at first, which is bad for the algorithm

[@EMSGARAGEE61]

Thanks, i will give it a try with the 4K render, and i did actually upload few hours before release, KZbin said it was full HD but changed when I made it public

[@highze]

Great work, sorry you have to deal with this. Your video makes me appreciate my good old M57.

[@ahmedza9303]

Great video, I've been waiting for your upload, this engine is related to the notorious n42 n46, also very troublesome, however if serviced well can run for a long time. I switched to a 320d, best decision ever made, i will always enjoy watching drama related to this engines as i was always dealing with similar issues.

[@tehedx]

I can totally imagine the frustration. Wouldn't even know where to start diagnosing. Keep up the good work, you'll get it running!

[@Remusutul]

For the next episodes, try to publish your videos on 'Unlisted' and after the process is complete, you can change on 'Public' so everyone have the 1080p quality option right away. That's how every KZbinr with experience does.

[@EMSGARAGEE61]

Thats exactly what i did, youtube said its hd, glitch probably

[@jarrie77]

Well, the car is great, but when BMW started the N engine line quality when down massively. 6 cilinders ara better but also with there issues. I think the best way is to stick with original parts, clean the injectors and check the high pressure fuel pump.

[@retrofitman]

The best engine to quit the mechanic game 😅 I"m wrestling with n46 on my channel, there is a lot of footage that needs to be edited for it, but I cant even edit it cuz of the frustration. Great work and nice explanations. Kudos!

[@EMSGARAGEE61]

Hahah, thanks, nice channel, feels good that I’m not alone😂

[@retrofitman]

@@EMSGARAGEE61 thanks! Consider subscribing, I would appreciate comments and tips how to do things better or easier while doing this dirty jobs no one wants to do 😅

[@projecteuroau]

That sucks! All that work and you need to keep pouring time and money into it. Should have swapped it out for an N52 or something more reliable than the 4cy petrol. Live and you learn I guess! At least you get more content for your channel so it isn't a total loss! 😁

[@mifo1133]

as N43 118i owner i thank you so much for this content, i was hoping you would like this engine but there is no hope anymore i guess. I had problems with engine oil pressure too, chain guide fell apart and block oil schnorchel. Then after mechanic replaced both chains, oil pump goes bad while driving on test drive - oil pump main shaft had striped off teeth, i dont know what happen so i coulnt blame mechanic..bought new oil pump for 1000€, thanks for test if injector leaking i will do that for sure. Too bad market with injectors for this engine are very bad no new, only refurbished, leaking, not working injectors so its very hard to get properly working index9 (latest). Maybe you can show us what is high pressure dropping due t leaking injector and how it look after replacing. thank you so much for this N43 content and teaching smth new! im sorry for the oil pump even if i dont understand how can balacing shafts affect oil pressure?

[@EMSGARAGEE61]

I suspect the balancing shafts because the 2 shafts has small bearing that works same like crankshaft bearings, and you see the condition of the crankshaft bearings, so I am guessing balancing shaft bearings are shot😊 aswell as that’s the only thing that we didn’t check on the rebuild

[@mutti8305]

Keep on going, I feel your pain!

[@darius2640]

Id like to see you try working on something 90s japanese, like a 5 or 6th gen civic. see what its like from bmw drivers perspective. they dont break down like bmw but they are also a challenge to work on because of rusted bolts everywhere, getting creative with puting one good part from two used ones from junkyard, driving experience you wouldnt believe but surprisingly similiar the car encourages you to rev higher and go faster than you need to, a very high percentage of slammed, straight piped civic drivers later become bmw drivers

[@olivman4795]

You'll win this battle, no doubt! Thanks for sharing all of this with us, looking forward to seeing it fixed and you driving it. Some ideas for another BMW project : an M550D, a B58, a 7 series, an M, an Alpina.

[@pauliusmateika2359]

Stiprybes ir sekmes 😇 Video kaip visada labai geras!

[@mrlolas1010]

Bro your stuff is hella educational, keep it up! 💪

[@FrankDisseldorp]

Just for information: It is not recommended to re-use the decoupling element of the injectors. They work as a seal and are one-time use.

[@fabienpoupon8493]

Hang on, you found the problem, you are really an amazing mechanic. As far as other BMWs, why not an E38 ? Tyler Hoover and Sreten sold theirs when they finished the overhauling and we never saw them enjoying theirs. Or a car equipped with au faulty panoramic sunroof, like my F46, which costs 3000 € to repair ?

[@Coonandfriendsify]

I'm here for the journey

[@holakuna7969]

Dude its all a learning experience. Keep ur head up

[@aleksandarpesic5635]

Some E60 530d 💪💪💪

[@stefansahlin9476]

OMG! Du måste ha en ängels tålamod. Hoppas allt löser sig så att du får igång bilen. Följer....

[@mds2465]

You should talk to Sreten from M539 Restorations. He's rebuilt a number of these engines and really knows his stuff!

[@ChunkoMunko-kp8du]

What a headache! Still great to watch though. Really informative, cheers!

[@moreblessingncube6877]

Good content i love watching your videos

[@agentstalin6333]

Keep it up man! im quite interested with this, since I have been struggling with N54 with pretty much the same misfire condition and nothing has helped so far, including injectors, coils, plugs, valve carbon cleaning, vanos cleaning etc. i have had more problems with N-engine in a month, than 2 M57:s in past 6 years😂

[@EMSGARAGEE61]

Yeah same man😂

[@iman2730]

I had the same issue as you described in the video with the missfire, i read on some forum that only NGK spark plugs were recommended, even Bosch plugs which BWM supplies are not good on these N43 engines, tried replacing injectors, did not help, new plugs nope still not, tried again with NGK plugs, solved the issue

[@EMSGARAGEE61]

Damn, that’s crazy, will give it a shot, but I already have ngk

[@D4ni7i]

Hey, very nice videos you make. Currently one of my favourites on KZbin! I bought my fourth BMW last week, but this time my first petrol car. E90 318i N43 engine. Would love to learn more about it and see it on your channel. Best regards and keep up the good work

[@mc_frag8643]

Hvis du ikke gjør feil, lærer du ingenting💪 Hilsen fra Augsburg, Bayern

[@wheelieschulz1204]

Good luck for the E92 I hope it’s good after this

[@e36fanatics]

Worst thing is where you can locate the problem instantly and you keep throwing parts at it... Kinda in same boat with emissions for my E36 at the moment

[@ClaudiuBandrabula]

Keep up the good work! I would like to see an N57 engine on your chanel, like maintenance and stuff like that... Anyways great job! Peace from Romania 😊🍻😇😁

[@Sifsarmonikas]

Do an e39 next! Currently my daily and trying to bring it to its past glory when i have the time. An petrol inline 6 ideally as they are the most common here in Europe

[@EMSGARAGEE61]

Maybe, just so increadibly expensive they are

[@Sifsarmonikas]

@@EMSGARAGEE61 really ? Cars over 2.0 litres are relatively cheap here because of high tax due to emissions (I’m in Greece right now )

[@EMSGARAGEE61]

@@Sifsarmonikas yes, but mostly because they are dead from rust, and if it is not its expensive

[@julienpepper]

arrf very bad storie today, its not a good day, very strange problem on this car! all my courage for you!

[@Florin_Bolocan]

A nice project car would be an E91 M57 Manual (or Auto) and if you find one which is M Sport even better. You have pretty much everything in such a configuration (power, handling, practicality, control, fuel economy). M57 is a great engine if it’s well maintained, a proper torque 500Nm and around 230hp depending on year. I’ve bought one E91 M57 Manual (330d 2005) a non-runner. After a bit of digging, cylinder 1 has no compression at all, whilst all the other cylinders have very low compression 4-5bars only. I suspect the timing chain has jumped and lead to an interference on cylinder 1 and poor compression for the rest.

[@EMSGARAGEE61]

Sounds good, well its a good thing its not that hard to check the timing on m57 engine

[@sebdries]

Jeeeez, what a shitty Situation. Kudos for soldiering on, you got this

[@maryan7926]

o2 sensor,bank 1 is the problem for misfire cylinder 1 and 4. I changed the sensor ( bosch ), and the motor run like new. Sorry for my english☺️

[@Thaamas99]

Har samme problemet på min 2.0 tsi scirocco. balance shafts, jævla dritt, Eg e fra stavanger også, kom over youtuben helt tilfeldig, skal gi deg en sub :)

[@bimmernath]

Really enjoyable video as always. It was really sad seeing the issues unfold though. When you said low oil pressure I really felt for you. The balancing shafts really do help keep that engine smooth and they remove a lot of vibration and harshness. It’d be a shame if you have to remove them as your modification of the new oil pump to work with the balancing shafts was a really good idea. You’ll know more once you’re back in there of course. Did you check the engine was still in time when you replaced the cam cover?

[@memberzero3325]

i never seen a 4cyl for this car till your videos. probably cause im in America

[@RealDomce]

Ah the BMW the daily project :D

[@nielssen21]

Beina høyt, spent på denne :D

[@juangouveia8098]

bit unlucky with this one... you will fix it in the end im sure....

[@ovyys]

HI . I have a BMW 318 with n43. Exact same story, I completely rebuilt the engine then exactly the same problem when the oil reached high temperatures boom... low pressure error. exactly like you, eliminating possible problems with the oil valve pressure sensor etc... nothing, always the same error, then as a last solution I completely replaced the entire oil pump with a used one... nothing to do, same problem... For me it remained a mystery. I managed to fix the problem by simply increasing the engine rpm at idle with ISTA because when it was very hot the engine even dropped below 600 rpm, I raised the rpm up to 700 rpm and since then the error has never returned and the engine runs well . The problem with this engine is that it runs at very high temperatures... oil reached 118 -120 degrees water at 117 degrees all the fault of the BMW engineers forced by the Euro 5 pollution standards to make it run at these temperatures. .. I'm very curious if you can find another solution! I wasted months studying everything down to the smallest detail, I couldn't find anything else. I wish you better.

[@EMSGARAGEE61]

That is crazy, did you measure the oil pressure manually with a manual gauge?

[@ovyys]

no but I changed 2 pressure sensors. It is impossible to have wrong values . When it is really hot at what rpm the engine run?, because the manual says it should run at 700 rpm but it runs below 600. and when I increased the rpm to 700 the error it disappeared... I know it's frustrating@@EMSGARAGEE61

[@Mirska1]

Did you remember to code the new injectors to the ecu? Also if theres any problems with the nox system/nox sensor it can make the engine missfire. If you havent checked out yet bimmerprofs has a lot of info on these engines and on the nox system. I have a N53 in a F10 chassis and it has been quite a pain to diagnose problems, but when its working it is a brilliant engine.

[@EMSGARAGEE61]

Yes i coded them in, it actually seems like the nox is actually may be the problem so your right

[@archizLV]

I once wanted to try out n42 engine, worst idea ever!😅 So now I only stick with 6cyl M54 or M57, in my experience and opinion these are one of the best older engines and they are super reliable. So yeah man, don’t buy these N engines anymore, they are all crap.😄

[@guntrisstepins7380]

I would love to see you rebuild e46 330D

[@ianmcd7523]

Really enjoy these videos ,and it gives me inspiration to try to keep my BMW going well 😊 Have you worked on the BMW 316ti or 318ti Compact? Or have a plan too maybe work on one in the future

[@EMSGARAGEE61]

Unfortunately not, but I newer say newer, maybe one day?😊

[@ililiililliliill9498]

Uh oh😢

[@snafz1027]

so glad i found your channel! Great content, but how do you fint the manuals for ur cars?

[@EMSGARAGEE61]

Thanks, ista

[@7Janiel]

bmw e92 n54 :)

[@Framus-wm3ye]

Love your content on this N43, its a tough engine to work on. Do you have an update to finally sort it?

[@EMSGARAGEE61]

Thanks, working on it, hoping to finish the video on it soon😊

[@tired365]

Mercedes CLS next 😁

[@EMSGARAGEE61]

I like that😊

[@adimarcu4334]

👍

[@bigdeal87]

There is also an AGR maybe stuck open and sucks in too much gas / oil ?

[@user-dz2jy7ss2g]

😢

[@czrptr6849]

360p gang

[@kriss123kriss5]

Hadde likt å sett deg jobbe på en e46 har en du kunne kjøpt men er relativt fin da:) men bare ta kontakt hvis du vil vite mer

[@EMSGARAGEE61]

Kanksje, hva er Instagram din så kan me se

[@antonstenborg9746]

360 only

[@uz1404]

deilig å vite jeg ikke var den eneste med e92 problemene, for vi en cost break down på slutten?

[@EMSGARAGEE61]

Yep, gløymte det på siste prosjektet, men det skal jeg gjøre på denne, og den blir lang😂

[@benjaminberger9629]

- hydraulic lifters - piston oil squirters - worn bearings - worn turbo - oil pump

[@kingchaos4306]

Turbo on N43 😂

[@benjaminberger9629]

@@kingchaos4306 🤐

[@trxster.e30]

why is the only 360p ?

[@EMSGARAGEE61]

The video is being processed, soon 1080

[@ercanos8984]

e46

[@ahmetsuer5781]

What about an E39?

[@EMSGARAGEE61]

Maybe, just they are rusty here i Norway

[@ahmetsuer5781]

@@EMSGARAGEE61 yes in germany its the same. I have one which is arguably rust free(underside of the drivers door is rusty and the fuel filler cap place). They are also a bit expensive but very nice and reliable cars. When you buy one, buy the 530i or d facelift. The m54b30 is something else and a manual one cause the automatic gearbox on the e39 is not that good

[@Samal_ibra]

bro process the video quick im holding my food to watch it

[@EMSGARAGEE61]

Sorry bro KZbin glitching😂

[@ivanxd796]

Fuck this 4 clynder engine you need to put straigths 6 3.0i engine in it better engine or 3.0d this engine has so much trubble

[@projecteuroau]

This is what I suggested in the first video. The N42/N43 4 Cylinder is trash from BMW

[@EMSGARAGEE61]

I would if i would keep it, but i will get more for it in the original way with the original documents

[@ivanxd796]

@@EMSGARAGEE61 oh okay i am thinking that you myb using this car for daily driver for tuning

[@EMSGARAGEE61]

@@ivanxd796 yeah you know i want to grow bigger on KZbin, so after I’m finished with this car I will sell it so I can buy bigger and greater projects😊

[@ivanxd796]

​@@EMSGARAGEE61nice keep up good work❤

[@googlebad3540]

STOP BUYING TRASH