I Removed The Speed Governor On My 200cc MINI BIKE!! *FAIL*

Turns Out There was a Pt.2 Video made and I didn’t watch it before we put everything back together..LOL we may have ruined it already😭 It for sure made it faster but not safe right now😂
SOCIAL MEDIA: ⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Instagram: / darrius.anderson
SNAPCHAT: Darrius_01
TIKTOK: ybd.bacc
🎥 MORE VIDEOS ON MY INSTAGRAM! @Darrius.Anderson
🤩MOTOL0KO: www.moto-loko....
USE CODE: YBD14
🎶 🎤 Music in video: / @vthealienchild2721
⛑ 🦴 Wrist Brace Guy: www.allsportdy...
Instagram- @WristBraceGuy
⬇️🛑DIRTBIKES FOR SALE⚠️⬇️
SouthGeorgiaMotorsports: www.southgeorg...
⬆️⚠️DIRTBIKES FOR SALE🛑⬆️

[@that_yeller_foreman1529]

U need a spring on the throttle pulling it back so it dont run wide open, and when you go to start the bike always use the choke itll start first pull every time, and when you bought the bike they dont come with oil, it just has a little in there to protect the engine parts in shipping, and another super easy speed mod you can do is there is a screw that only lets the throtle go so far, so the tab it screws in you bend it back, and itll go really fast with that and the governor you just took out

[@jetsonburtis3240]

Smart

[@trates4849]

Great tips

[@jeffrey769]

bout 55

[@sebastianmatney9162]

If you do a jack shaft delete and do direct drive they go pretty fast for a "trail bike" me and my buddies got some and we had a car follow us and they were going 61 and we still had some rpms left

[@iknobetter5961]

Thanks 👍

[@ADAMROCK78]

All you have to do is bypass the governor spring with a zip tie on the throttle body under the gas tank, it's just as accurate and you don't have to take the motor apart, just search governor bypass with a zip tie. 🤘

[@skiiizx10]

Is that all you have to do or does it depend on what mini bike you have because I saw a video of some guy who did that on a frp gmb100 and he took out the limiter

[@ADAMROCK78]

Yeah zip tying it pretty much does the same thing, it just prevents that limiter spring from releasing, it's just less work zip tying it instead of completely removing it

[@SeanBulicki]

⁠@@ADAMROCK78I just zip tied mine and it started to stall and now won’t start. It was running completely fine before hand and now doesn’t even start. I just got a new carb and still won’t start. I checked the spark plug and everything else and I don’t know the issue, any ideas?

[@reezymfb7764]

Bro when that shit took off lol😂

[@ADAMROCK78]

Yeah it basically keeps that governor spring from engaging, and yes you'll definitely go faster without that sluggishness when you reach top speed 🤘​@SeriousandfunandJesus

[@azpitbikerider4031]

Put a return spring on the carburetor butterfly because it stays open 👐

[@lucassarrazin6306]

Exactly

[@RagingWithGene]

Thanks bro cause I did the same

[@nys.zaza6315]

Yo can u make a video on this please

[@LifeWithJay22]

kzbin.info/www/bejne/iorTaIadhMR5qLc thanks in advance

[@LifeWithJay22]

kzbin.info/www/bejne/fpauo3tnjs54b9U

[@fabianpatino4229]

Bro the fact that you can jump on that thing so fast 🤣🤣🤣

[@pumbacoolmaster6629]

Put the governor back and put a torque converter on it I’m done that with mine and it makes it go like 45 miles an hour

[@ericcooper2174]

Whenever you remove the governor you need to add a return spring opposing the throttle otherwise it’ll just run wide open….. take off the air cleaner and you’ll see what’s going on

[@isaiahdorsey-bv2dp]

Yo I did this with my ct100u and I did everything added a spring and everything and it still is wide open

[@DroSmoke420]

My 212cc predator engine for my Go-kart was set up the same way bro. U gotta remove all the linkage to the governor arm, then (with the engine open again) from the outside top cut that metal governor arm off that u left in there when u removed the governor. After that just tap the hole to make threads where the governor arm was and put the correct sized/threaded bolt in its place w/ sum thread locker on it. Then close the engine case back up, fill with oil, connect a return spring to the throttle linkage and also back the throttle screw out a bit that's on the engine.... Once all that's done, ur ready to ride out.. NOTE: Very Worthwhile Upgrades to get more horsepower n speed are as follows---> performance intake air filter& carburetor w/ upgraded carb jet, Heavier/bigger valve springs, high flow exhaust pipe kit (w/ high flow exhaust muffler tip for the neighbors sake, lol), adjust gearing ratio to your preference by installing a smaller/bigger sprockets in the right places.... After those upgrades, it's like a night n day difference w/ power&speed gains and makes it into something u could seriously hurt urself playing with if ur not careful lmfao... I Hope that helps and I hope u guys get ur minibike set up on point like u want it.. oh and btw, I did it all using YT vids. My YT playlist labeled "Go-kart Stuff" contains every video I used as instructional reference to do everything I just explained, but for my predator 212cc engine on my Go-kart.( I also disconnected and removed the oil sensor cut off box thing)

[@ratdad48]

This thing is way to complex for this guy. Needs to stay with simpler things with out too many moving parts.

[@MapsAndCaps]

​​@@ratdad48the throttle linkage is pretty confusing how it connects with the governor. I put like 5 hours into it and couldnt get it original again before i gave up and ordered a slide carb and a different throttle cable.

[@1koolblue]

You need to upgrade the carburetor to a mikuni style one, this will allow you full control of throttle, no more running away bike!

[@doobietwo1]

Put the chain a direct link right to the rear sprocket form the clutch, this gears your mini bike to higher speeds

[@mlindsay527]

You will go fast, but have very slow takeoff.

[@xaviermccloud4586]

@@mlindsay527 Very, Very slow.

[@chan-pk1ei]

ppl in these comments trippin but ye u wasn't posed to take that out you need to go watch black66 video on taking the governor off he did it right

[@etiennehagg6625]

It has a centrifugal clutch so when u take off the govener it allows it to spin fast enough to engage the clutch i have a 80cc gocart and i had the same problem when i did it

[@heavystarch100]

I couldn't even finish watching! Too painful! Ignorance is hard to watch, It's like watching a fatal crash in slow motion!!

[@justinthomas5003]

u ain been alabama have u? I keep seein someone who looks jus like u

[@vuzionboy3k441]

not every rich black guy looks like him

[@jordangibson6073]

@@vuzionboy3k441 lol

[@justinthomas5003]

@@vuzionboy3k441 the guy that looks like him jus keeps lookin at me whenever im around him

[@troymccoy2654]

Ain’t nobody trying to go to that country ass place

[@1LuhG6]

Why did I do the country accent reading this

[@keithcola9104]

U didnt get the washer out under the governor there is a lil washer there go back in n get it bro!!

[@southtownloc_beats_4277]

So stoked this came onto my yt feed, I love this dude and I’ve been watching his vids since I got my first bikes in spring 2020

[@seandubiel792]

This made my day haha. Y'all are a trip. Hope you got all the kinks worked out.

[@minhtinnguyen594]

Lol I think he left the governor washer in there

[@MrHonxican]

I caught that too 😂

[@tylerhatch231]

U need to put a return spring for the throttle linkage it’s just stuck wide open now cause u removed the governor lol u have to find a way to connect the throttle linkage to the little black piece on carb this way your not stuck in wide open throttle I can get u pics if need be

[@fuckface8944]

Wym

[@_shtboxgarage]

I zip tied the spring and took out the throttle stop screw and I ran 33mph (in CO) just ordered my stage 2 kit aswell hoping for 45-50mph once that’s installed

[@chrisgonzalez2799]

Bro this vid funny af the bike got a mind of its own 😂😂 keep up with the vids

[@lilmockme8821]

has anyone thought the throttle nut on top of the arm might be to tight, keeping the throttle wide open?

[@tristain8534]

You need to loosen the idle screw to the carburetor and it would bring your idle down enough to control it

[@louisianarebeltv4878]

Your problem is the linkage... yes you took out the right part. but you need to fix the linkage. so on the carb you will see the linkage. step 1: drill a small hole on the throttle lever. step 2: the linkage you see on the carb needs to be bent and cut into the right shape to fit in the throttle lever hole you just drilled. then once you rerouted the linkage from the carb to the throttle lever you'll be good.... here is a video too show you how to do it. kzbin.info/www/bejne/gYmndpmPaMyiqM0

[@leedemarsh3159]

I swear I seen the washer still in there to

[@shotgunz124]

This works good easy to do I done it on one

[@user-wk8gg2uj8b]

No that video link is to bypass the governor. He actually took the governor out so this is useless for him

[@louisianarebeltv4878]

@@user-wk8gg2uj8b yes the video is to bypass it.. but that doesn't matter because if you take the governor out and/or bypass it you'll still have to redo the linkage 😂

[@giannivaglio587]

you should go to Harbor freight and buy a 420cc lawnmower engine and throw it in there😭

[@tnctbone]

I was wondering is it worth doing that. It seems fun but will it just be the same as the 212 cuz of the added weight

[@jessesaucedo6203]

Put a racing 2 stroke carburetor on it and a nice muffler and it will fly just with that

[@ryanbarnett2464]

I had that same problem it was my clutch bc it was messing it up and I fixed it by buying a torque converter and instead of taking the governor out I zip tied the spring trick.

[@flamboiianic]

Yeah you always think you're first till you refresh💀💔

[@wags9777]

I think the Governor linkage pulls the throttle open when at lower rpms. It has to be disconnected because it's not there anymore. there should be an arm on the outside of the block from where you removed the Governor. Remove all linkage from that arm. Then adjust carb idle screw. Watch a video on how to remove the arm. It's easier than trying to explain.

[@juanpozo6952]

What video?

[@joeymarqez1730]

I have one put greesw it it so ya

[@CS-mi3yu]

Omg ..I enjoyed this video so much... You guys are crazy ... Good dad and son stuff right there ...your gift of jumping on a moving bike is unparalleled in this world..

[@xdtacocat312]

I have a Coleman CT200U and put a predator 212cc engine and straight piped it. It wants to wheelie a lil when I full throttle from stand still

[@BoNd-z2m]

The dog be like: 😐

[@backyardprojects8153]

Yea you took out the right peace Look up red beard garage

[@dirtvolt0]

So is the Coleman worth it I kinda want one

[@gulfbankflocca1436]

If u wanna go slow but big bike Yh it’s real big in person but kinda slow I recommend buying a stage 2 or stage 1 comes with exhaust and some air filters and more and it will do like 35mph

[@dowofdoowkw7559]

yes

[@Tikijoe101]

Ok so I got the same bike from lowes a few weeks ago. I'm no mechanic. I have my HUD display goggles from Zeal. With limiter 21 mph tops even with my 190 lbs fat ass. My nephew is not even 100 lbs wet and same result. Seeing if I need to take mine to taters for the removal.

[@fenderbassfan]

Man. You almost had a great Fail video. I don't know how you got on it . I thought that thing was gone!

[@reneainley2600]

teket off fuel tank you look the speed GOVERNOR SPRING TAKE OFF BECAUSE THROTTLE STUCK LOOK LOOK GOOD AFTER THE TEKE OFF WORKING PERFECT

[@commandercuda]

Lucky your neighbors are cool I have the exact same mini bike and the last time I road it the cops were called on me

[@EdythButler-ye6ub]

You are hilarious!!! I'd chill with you any day!!! You never said the speed afterwards though. I'm curious to know what it was. Lmk. great video.

[@heathenprojects2639]

Zip tie the governor spring would have done you better the 196 is a tough platform you can modify it but may I for argument sake check out a ducar 212 and why I say this motor for modify 196 or predator 212 with governor removed or bypass will only spin to 5k rpm tell your valve spring float the ducar has a shaved governor it's set for 5300 rpm its a stage 2 motor out of the box it's over built and cost around 200 just building a predator or this motor will cost over 400 food for thought new sub

[@yessur4753]

Check out our EBeast fully size electric dirt bike with a Honda chassis/ plastic with 4 gears and a manual clutch. Also we have our new EFox a mid size electric dirt bike also with 4 gears and a manual clutch.

[@MrsFlutterby4]

I could use some help with my son’s axis 200 mini bike if anyone would care to help me. I don’t know much but I sure will try and learn as I have most household repairs over the years being divorced.

[@jessesaucedo6203]

21 mph my bicycle 49cc friction drive 4 stroke motor went 25 stock and I put high falutin 2 strock carb and high flow muffler and now I get it to 45 damn thing screams

[@troyholland3436]

It’s pointless to remove the governors on these engines it’s way better to straight chain it and you’ll get about 45-50 max speed but u won’t risk blowing the motor

[@garrettromer8499]

Man u catching and then jumping on that bike that fast was impressive. Lol I would have just let the thing go.

[@taterisbell5336]

Put the bike on a concrete block with the back tire off the ground then put a return spring that little flappy thing for the governor needs to come out and be replaced with a bolt and you need 18 pound valve springs or it going to float valves be careful turning to high or the oil dipper will break off and destroy the motor.

[@adynnzanetti9029]

Make sure there is a return spring on the throttle arm

[@kylesyx8432]

You did pull the washer out after you removed the clip and gear ?? If not …. You ll find out!

[@Minininja-h1r]

The reason it wouldn’t crank write away is becuase u either Have that switch on the handle bars turned off or either the gas’s is off or u can turn the choke on

[@dayleeday797]

i had the same one but sh*t went to slow for me🤦‍♂️ so i sold it & got me a dirtbike instead but the thingy that makes it go faster it takes a special screwdriver but it’s whatever

[@LeeLeexs3]

If it was smoking that’s because there is too much oil trust me it works with every motor if it’s smoking sometimes the first thing you want to check is the oil because I have a push mower and Apple way too much oil in it oh well my father did so set my father put too much in it Smoked

[@moflyboyblanquito541]

Mine just did 55 stock. Just took off jack shaft. Inverted clutch straight chain.

[@mitch3782]

Yea I did this but tied the cord as it pull the throttle all the way back it’s dangerous but I still drove it cus I’m a gremlin 😭 It is now for sale

[@peniaji_yt5762]

I have the same mini bike like you have all you have to do is use the supplier and bend the thing down that is touching the governer screw, bend that thing down and it will go 23 it happened to me

[@deniephoenix3204]

Can you please help me out I have been trying to get one but I can only find it online and it is Way too much can you please help me

[@cfdavid3457]

Bro bro bro if you wanna go fast just get a pipe and a carb and springs and the motor don’t take off by it’s self it’s has to do with the spring that pulls the throttle back

[@jacobthery8982]

all im gonna say is nice freaking save when it started going withnither of you on it. That coulda ended really bad

[@quesoblanco469]

Maybe you need to adjust the throttle I took my throttle stopper off and my bike went off on its own, so I just had to adjust a throttle

[@brycelabtv9685]

Bruh I think it’s the choke when you rev it and the choke is stuck it’s gonna go crazy like you said it has a mind of it’s own

[@joshhawn3988]

that shit takes me 2 mins, i get a really sharp pocket knife, tap it in between that little circle clip then twist it, it pops right out. screw drivers are too fat to grip that little cclip.

[@GEEBUZ89]

Remove that jack shaft and run the chain from the clutch directly to your rear sprocket

[@beastonbro530]

Hey dude it was only smoking because oil got on the engine and the engine got hot it’s not gonna catch fire or anything like that

[@peppermint9627]

It would be easier to just take the governor off the outside of the motor throttle cable right up to the carb

[@tezzylord2565]

Not a 200cc Ik because I have tabt bike it’s a 196 as market but it’s really not that big

[@MikeBeatzcom]

Take all that out and tap 7/16 self tapping bolt

[@stephenrivera8611]

Throttt Return spring watch red beards garage 212 predator governor removal

[@kevinjohnson9372]

U took the Gove out there's a rod that goes from the carb to govner arm shortn the rod and make it go the throtle lever on the motor then hook the cable back up

[@thunderf4]

So many things wrong in this video. Please find someone that knows what they are doing.

[@ariannadustin4985]

You could bypass the governor with a zip tie not know more but it's cool

[@ratdad48]

Why even show this??? I just wasted 10 minutes of my life???????

[@javiervillafuerte1869]

Dude you know that thing that you said oh put it on the stud no you have to remove that and plug it up with a bolt and loctite

[@mooseman4950]

If you pull the gray lever aka the choke out when u start it it will start in 1 or 2 pulls

[@Zexkey]

Bro it’s not the throttle cable mine is dining the same think

[@azpitbikerider4031]

Upgrade to a torque converter for a 5/8 shaft on Amazon 👍

[@iluvdrugsike9976]

I have the 100 version of that and it hits 35 with governor on it so I didn’t remove it

[@memfusboi]

Open the side cover again and that arm has to be removed. That is apart of the governor

[@carlonhubbard6399]

you just now doing mini bike videos,smh damn bro you late to the game

[@Flurids]

There's a little metal washer that was behind the govener if you didn't get it out

[@hastyone9048]

Bro, question for you. I have the ct200u ex and just put a stage one kit from gopowerdports. I have to choke it every time to start even when warmed up. Any suggestions?

[@nathanallen6007]

Yea u have to use the choke to crank any bike then when its cranked cut the choke off and ride off u always gotra use ur choke

[@emilio2868]

what bike do you have and where did you get it from please?

[@Shizz_215_OG]

No, you need to take that thing out. You gonna fuck up your engine.

[@nathanialhulsey6900]

I haven't even removed my governor and mine already goes 54.5 mph

[@jamesrobison127]

hes stressing me out trying so hard to start the bike with the choke off lmao

[@IntelligentElephant]

If there's no follow up videos to this then this was a complete waste of time

[@jasoncraft9659]

Carb slide in the wrong way turn it 180 degrees and adjust idle

[@ivancounsell4077]

You will eventually throw a rod... you have been warned.

[@AidenKing-w6r]

U might have thrown the valves off by accident

[@ghikjedv5442]

And you won’t have that problem and the will go way faster

[@MikeBeatzcom]

16 oz is all you need for this motor

[@jamesrobison127]

i used a ziptie on the govener spring on mine it took 3 mins and made mine go 30 ez

[@ghikjedv5442]

He didn’t remove the washer from the governor

[@gahvinschulze7968]

Way too much oil 😂 i’m surprised it didn’t Hydro lock

[@MrMikeyprats]

U cut the spring on the throttle u just needed to take the screw out

[@Jordan_Yo_boy]

If you turn your idle down the throttle won't stick

[@rich2s0lid_]

It was prolly slow cuz you didn’t change the oil

[@Peacexenergy]

My bike starts but want go is it bc the chain to loose or something elew

[@ronniepape6752]

The idle just ejust it down and your good it happen with mines to

[@Cadance_Bigboy_]

When you start it pull the break so it dose not take off like that

[@matthewhall1190]

If you have a giveaway on this bike I claim it already

[@river7721]

Removed my governor bike wants to start won't run