As retired paint and body man you would have been better off with scuffing the entire frame and addressing the areas in the frame that were scratched down to the carbon and hitting those with a skim coat of filler then building your base of primer from there. Once you media blast carbon frames or anything carbon for that matter you begin to see the many seams, imperfections and joints that were covered by the manufacturer. I have never had good results with it and frankly unless you are repairing a crack in the carbon there is never a good reason to take the finish down that far. Love the build. You did a great job
@BuildaBetterBike Жыл бұрын
Thanks. I appreciate the feedback!
@whiskeydelta4073 Жыл бұрын
Thanks for good advice
@georgeelgar5986 Жыл бұрын
you seem like a great mechanic who is not only skilled, but also understands the customer and what they can do for a bike
@cyrilvillarosa2421 Жыл бұрын
Love the build. I wish your were my next door neighbor. I have a 2004 Giant NRS3 that could use a new paint scheme. I’d love to see your artistic creativity on that frame. Keep the video’s coming.
@mvp_kryptonite Жыл бұрын
Enjoyed the build, hope your son enjoys the wheels! It’s dope it’s light a custom colour way. 1 of 1! Keep up the great work and cool on the website & store
@alangarrett2292 Жыл бұрын
What a great looking bike components and paint job really suit it👍
@BuildaBetterBike Жыл бұрын
Thanks!
@kswsquared Жыл бұрын
I love how the colors seem like a nod to the classic Yeti ARC. Nice. :D Almost missed the Manitou fork which was also specced on the old ARCs...
@BuildaBetterBike Жыл бұрын
Glad you caught that. My son requested the "old yeti colors" for this build.
@kswsquared Жыл бұрын
@@BuildaBetterBike The kid's got good taste. 👍 Best of luck to all the racing!!!
@texasermd1 Жыл бұрын
Wow! That's my bike except mine is a 2016. A couple years back, I replaced everything except the frame with the best components at the time and I love it. 👍👍This turned out awesome!
@johndef50755 ай бұрын
I just bought a nos 2017 Sworks Epic frame. Put xt 12 speed and a Fox 32 Stepcast on it. Very fast and light. 25.2 lbs. with pedals and Only $2800 total. Really happy with it.
@docongtam7 ай бұрын
Nice paint job
@denniskurama19742 ай бұрын
Epic indeed ❤
@breakshot7451 Жыл бұрын
now no more "battle scares" on your frame, but now your hands/fingers are looking bruised and beaten;)) i know i know i can t work with gloves ,too. but you have to look after yourself;) great bike
@Tobias611 Жыл бұрын
I can really recommend "working hands handcream", they managed to get my dad's hands somewhat in good shape again, and his looked even worse. Amazing stuff.
@benjaminfitch5695 Жыл бұрын
Always watch your videos, glad to see you blasting a frame again! Have you tried a gap filler that you can scrape on? Maybe one that is a lot softer than the carbon and then get a sandpaper to finish it that wont cut the carbon but will get the filler smooth. Would love to see you material blast every component and use other cheeky weight weenie engineering. No dropper?
@BuildaBetterBike Жыл бұрын
Yeah I need to use a gap filler. Filler primer is not enough. No dropper. It's an XC bike for a short kid.
@DavidRynda Жыл бұрын
I’ve never heard the contrary, but I’ve always assumed you shouldn’t sand blast a carbon frame. Can anyone confirm/deny?
@BuildaBetterBike Жыл бұрын
It depends on the medium you use. You have to use a softer medium than carbon but a harder medium than the paint. It's a very fine line. I use walnut shells and it does not eat away the carbon.
@jacisjake Жыл бұрын
Have you tried walnut shells or cherry stones as a blasting media yet? harder then the paint softer than the carbon.
@BuildaBetterBike Жыл бұрын
I use walnut shells
@druiz127 Жыл бұрын
Love watching your videos,can you recommend large mudguards that fit manitou forks?
@casperfabia Жыл бұрын
great buiild
@tomfoster8228 Жыл бұрын
Love what you do, considering some updates to my 2015 Epic WC. Noticed you didn’t use a slackened headset on this one. Any reasons why not? Wondering if I used a 110/120mm fork, slackened headset and shortened the rear travel I could get close to the $$$$ new Epic WC - or ruin the bike 😂
@BuildaBetterBike Жыл бұрын
Slackened headset not necessary for XC
@tomfoster8228 Жыл бұрын
@@BuildaBetterBike really? That 2018 bike is 69.5 HTA and the latest XC bikes e.g. Specialized Epic WC 2023 is 66.5 HTA and epic evo being used in XC races
@johndef50754 ай бұрын
I just built a 2017 Epic with 71 degree head angle. Handles fine.
@fjodorgrigorow3851 Жыл бұрын
Thank you for this project! Do you mind sharing the total weight please? Cheers!
@mtb_mechanic Жыл бұрын
it seems you need a thicker almost gel coat for that frame, lots of diviots
@NallePu83 Жыл бұрын
Looks like 2020 Trek Remedy 8 now
@andrewstopford2121 Жыл бұрын
Did you flat and polish the clear coat?
@BuildaBetterBike Жыл бұрын
Yes. But not enough
@mtb7177 ай бұрын
Hi. What camera do you use for filming?
@BuildaBetterBike7 ай бұрын
I believe this was filmed with a Canon r5
@mtb717 Жыл бұрын
I’m 16 years old and I very love your channel. Hello from Ukraine 🇺🇦
@grigoryrechistov3040 Жыл бұрын
11:24 Those "brain" units are not known for being very reliable. And servicing them is all but impossible because of dropped vendor support. How is it holding up for you?
@BuildaBetterBike Жыл бұрын
Yeah... We'll use it until it goes. Then we'll swap it out. Fortunately, my son using it is a very chill rider.
@nahuelise4055 Жыл бұрын
Didnt knew you could sandblast a carbon frame,it doesnt get damaged at all? I tought that sandpaper was the only way to remove the paint
@BuildaBetterBike Жыл бұрын
As long as the medium you use is softer than carbon, it's fine. I use walnut shells.
@nahuelise4055 Жыл бұрын
@@BuildaBetterBike thanks for the info
@Whitehawkvisionfilms Жыл бұрын
Pure awesomeness! Make your son build the next one 😉
@1st2nd24 Жыл бұрын
No chainstay protection‼️
@BuildaBetterBike Жыл бұрын
It's in there. Just forgot to do so in the video
@mioszbrzozowski4657 Жыл бұрын
Great build, but sanding carbon frames makes them really ugly up close
@oftankoftan Жыл бұрын
great work, but I would've loved to see more shots of the finished product, as well as shifting and maybe a test ride by your kid.