I Screwed Up… DAD IS NOT HAPPY

[@charlesmcdade9722]

Good show

[@marvincook4543]

"Daisy is "Beautiful " "Sweet" "Love her marv'

[@southwestiowacattlefeeding6720]

You need to move the 3rd link pin on the tractor to the lower hole. Then it will tilt the bale fork's up when it goes up. And it looks like you need to move the 2 3point arms down so it lowers more. You could add a Bale spear at the top by the third link. The center of your bales could be a soft center bale.

[@HartungFamilyFarms]

I guess I didn’t even think about messing with the 3 point itself, thanks for the tips

[@FuelMan]

I know one reason some people have the older John Deer combines cut wheat for baling is they do not grind it like the rotary combines do. I put up straw for a cousin one time and we had to separate the straw. The rotary straw was for landscapers and the conventional straw was for horses and cattle since it had less fines to cause sinus issues. Like the rotary straw has. Hope you and your family has a safe and productive harvest. A few have started shelling corn in Greene County Illinois.

[@josephoneill3197]

Have a safe trip, and try NOT to tear up stuff in Denmark. 😁

[@HartungFamilyFarms]

I never would 😉

[@daltonengel3327]

We made a cylinder to use on our top link but you can also buy them with ball ends. We had the same problem with our 75C that we soved with a cylinder so it will tip the bale towards the tractor. Extend to spear in and retract when you raise.

[@randy6650]

Enjoyed watching the video Ron 😊

[@rosshall641]

It is called the hot wrench the torches

[@stevehillman2658]

I like your video as a cattle rancher Google apache hay equipment that whole Spear is totally wrong. We have 3 of them, they picked up bale movers never get off the tractor.

[@HartungFamilyFarms]

Thanks Steve

[@johnberg4618]

Put a thread stick in the middle of the up right to the top and it will work

[@marlindykman908]

We all have a day like that from time to time

[@8950MAGNUM]

add one more spear in the top center.

[@heatherkohlwey8379]

Some fine tuning, and that hitch should work. It's a good idea. You'll make it work. Please stay safe, and God bless.

[@HartungFamilyFarms]

Thanks 👍

[@archcrump7256]

Need a Center Spear Welded on.

[@mikeross5927]

Put a long spear in the middle at the top and two short spears on the bottom. And that will fix your problem.

[@rosshall641]

Just get the right size pins

[@alexmikhael5061]

14:50 the ''SLOP form side to side'' SHOULD melo out after you do the PIN SIZEING THINGIE to firm up the 3point.... THEORYORIETAKALLY LOL will it be able to adjust enuf to pull it up at more of an angle??? or are you gunna have to get a SHORTER TOP ARM??? or some thing...???

[@kdh1309]

So you Father was right again ! You really should pay attention to what he has to say , he's a smart guy !

[@MagnumCamNZ]

Ditch the quick hitch, get cat II hook lift arm's. As factory fitted to every tractor not in the state's. Put spikes throu bale lower! Hydraulic top link. Jeez! The euro crew been doing it for years. Same here in New Zealand. Yet we get told don't know what we doing 🤷🏼‍♂️🤦🏼‍♂️👎🏻

[@johntemple9875]

You can probably buy 3 bushings for the going from class one two pins that if they are long enough. enough they will fill the gap. A third spike on the center member would solve bale slant problem

[@scottalspach8020]

How many videos have you done this year where you have tore something up? You can be costly to keep around. Lol.

[@HartungFamilyFarms]

It’s a little thing that I like to call… job insecurity 😉

[@allanhiggins8624]

Take back and get him to fix it pay good hard work money for something you can't use for what it made for mate 👍

[@HartungFamilyFarms]

If he didn’t live 3 hours away I would definitely do that

[@thomasleonard1846]

Buy a hydraulic top link!

[@brianshell4111]

Throw a top spear on it, be safe amigo

[@dougwitman9176]

Put two bushing spacers in top link to minimize movement. Add another spear, should have three.

[@HartungFamilyFarms]

Our one at the farm only has 2 so I thought I’d be able to get away with it but maybe not

[@robertfunk6304]

Take the quick hitch off and hook your implements up direct and that will get rid of your problems. Good thing you are a engineer cause you would never make it as a farmer.

[@HartungFamilyFarms]

The whole point of using a quick hitch is so my dad can do everything himself, kinda the point

[@artyomm9442]

Hello Gus. Great job. Just wandering to know, do you clean grains after harvesting? ( I mean before or after drying) thanks

[@joshuadransfield2900]

It just wants another spike further up in middle. 😂

[@pastorwaynemaddy]

I’d take that back to the manufacturer

[@FuelMan]

Will u be at F P S 2023

[@HartungFamilyFarms]

Sure will

[@FuelMan]

@HartungFamilyFarms This year's stinks I wasn't able to make it to half century of progress and and short handed at work so not able to go to Farm Progress either. I would have enjoyed meeting you and so many other people I only get see on KZbin. Hope have a blast while you are there. You should try to get a tour of the ADM ethanol plant next door, it's one of the largest in the world.

[@marvincook4543]

"Sweet Doggy "Daisy Reminds meogg "Fliffy: ps,, a Good Dog picks its "Mastr" and Sticks with them !"LIKE MU "FLUFFY! Marv'

[@joshuagunderson6065]

Needs a 3ed spear

[@robertmiller9645]

Where’d you get your engineering degree Walmart?

[@HartungFamilyFarms]

Obliviously, I work for Deere

[@peterjames2004]

im guessing the spikes are to wide

[@peterjames2004]

the top link need a cat 2 ball in there thats whats wrong

[@robertmiller9645]

You don’t have to be the tractor owner to wash the windows. That would be a nice thing to do for your dad in my opinion but your call.

[@alexmikhael5061]

spoosed to be part of the PREFLIGHT CHECK right??? ....check tired... tires... fluids... key in hand... IS DRIVING SAFE (windows can you SEE ??? IF NO it = NOT SAFE ...if NOT SAFE = STOP & FIX

[@thomasleonard1846]

Not using proper pins!

[@robertfischer8553]

Why not sell it and buy one that fits your tractor?

[@daveelborn204]

You need a top spear on there too

[@geesss8675]

What's up with your truck not starting? Is that a gasoline or diesel? How long have you had that New Holland tractor? The tires look new... are u happy with it? U don't get to use /test/evaluate equipment from JD? You think you would leave JD and work full-time at the farm or fucking way in he'll that would ever happen.

[@rosshall641]

The old term is a puppy f****** a football 🏈 and that's basically what you're doing get the job done and forget about this goddamn s*** on the social media

[@rosshall641]

I'm 56 years old and have no kids I know why your dad's pissed off you should just be doing the task at hand

[@rosshall641]

God you young fellows aren't that smart are you's

[@machineryworking4589]