I Snorkeled A Street Bike 🤿 (Part 1)

In today’s video we see what happens when you snorkel a street bike! I hope you enjoy the video and thanks for watching!
KENTUCKY KUSTOMS SHIRTS - www.kentuckyba...
CFMOTO - cfmotousa.com/
INSTAGRAM - / kentuckyballistics
TWITTER - / kyballistics

[@KentuckyKustoms]

Would you like to see a part 3 or no? I hope you enjoyed the video and thanks so much for watching!

[@coltonhowe527]

Yeah part 3

[@michaeldaugherty2293]

Yes

[@jordantibbetts8470]

Yes

[@samsadventures9900]

That poor honda rebel love it there the best brand..

[@junkfarm1174]

Yes!

[@rogermitchemjr6722]

I'd love to see a part 3, Scott always get his dad to get in the water never fails 😂😂😂

[@Watthead80]

Third times a charm. I'd say extend the snorkel and get the exhaust up there too. You could be getting too much back pressure on the motor from the water. If that don't work, look into getting a small diesel, maybe a Duetz, this will eliminate the need for electronics. And get full waders, for you and POPS. I was expecting Scott to take a spill when he was trying to get the bike unstuck.

[@jessemattison8139]

I was going to say the same thing on the exhaust

[@garyeaton5719]

Yes, raise both the intake and the exhaust as well as waterproof the electronics including the instruments. Might also consider floatation, might make recovery easier and you know it will need recovery sooner rather than later.

[@DC4EVA]

Great show scott, your verry lucky to have your dad still in your life, i wish i had that chance, keep bringing us this cool stuff

[@satori8761]

Went to get the milk. (Sorry, had to)

[@DC4EVA]

@@satori8761 no bitch he passed away! Not sorry had to

[@gideonvanniekerk6418]

Same here bro, it changed my life so much and I know how you feel

[@scottydu81]

@@satori8761 Mine went to buy a pack of smokes across the rainbow bridge back in '05, I miss that mustachioed motherfucker

[@forrestgraves4022]

There are 2 ports on the carburetor (one is a vent and the other is an overflow drain) that will need hoses routed up to the highest point possible.

[@jdemeter4357]

And the vent shouldn't act as a funnel, extra wide opening that catches more water and add a purge valve of some sort.

[@tbthedozer]

Good idea! Maybe also silicone the spark plugs and coil wires. Flex sealing the whole engine wouldn’t help what your talking about and it’d jus be more likely to overheat. The folks running deep water mudding and such probably have a few more good pointers to pick up too.

[@404nitro]

For what you are using the Rebel for, you should swap out the rear sprocket to get a bit more low end grunt. The truck looks great. Dad did a nice job! Also, make a cover for the air intake snorkel so water splashed up from the front tire doesn't go down it.

[@wranglerhenry3339]

It is good to see that Dad is still out there playing with his kid(s) even though they're grown. That how it is with my son and I, and he Blessed me with (3) Grandbabies and counting.

[@Enigma-Sapiens]

Nice job on the bike and the truck Dad! Yes, part however many it takes! Extend the exhaust above the water level too so water can't get into the engine if it dies. Seal the spark plugs and all ignition components. Put one-way vacuum valves on the carb overflows. Put a deflector and screen over the air intake. Etc., etc...

[@paularnold3789]

Yes a part 3. Also try running the exhaust up about 2-3 feet above the seat.

[@drfrankensteinscreations]

This was what I was thinking too.

[@gordtron]

really diggin the engineering on this channel. i would like to see further development.

[@BI9638R]

Bigger sprocket, and bigger more aggressive tires. Get the exhaust up out of the water. Great video. Glad to see you and dad having fun. Looking forward to #3

[@goldenwheeledbanshee9160]

Yes we need more of this! I love these 2, Scott's. Great video. 👍

[@007twm]

Yes a part three please. Also That truck paint job is superb. Nicely done. 👍👍

[@MrDuck39367]

You need to go with a bigger sprocket ⚙️ on the back so you don’t have to ride the clutch so much. 👍

[@user-SgtArmoroldtanker]

Fact!

[@tubeonline629]

Smaller front sprocket is cheaper than bigger rear sprocket.

[@redbeardoutdoors4914]

Yea definitely needs regearing!

[@davedave9552]

I love your content, please love every second that you can enjoy with your father. Not all of us are so blessed.

[@brandondone2888]

3rd Video please! I loved the first 2 and love to see you guy trip out the bike. It made me have more faith in street bikes going off road.

[@Thegoofyairgunner]

You guys are definitely living the good life! Your pop reminds me of my father in a good way. My pops could basically do ,make or fix anything and he always had fun doing it. Thank you for bringing us along

[@yomomasface]

Dude! I’ve seen that GMT900 from almost it’s start(years ago at KSP) when I hade one like it lol….being a grandpa truck to being a now GRAND papaw glorious 9 hunnid son father project. The rebel is hilarious and kinda badass but the Chev truck is a whole new level. Love you Scott and Scott! Fellow hotrodder Calloway/Marshall countier here! God bless!

[@asafpelleh7594]

Standard home door in Israel: The "Paldal" door is constructed of 2 sheets of galvanized steel (to prevent metal damage in oxidation-reduction processes) with a thickness of 1.25 mm with welded longitudinal reinforcements. The door is equipped with a multi-bolt locking system consisting of 7 bolts that connect to three door jambs the door: 5 bolts connect to the frame next to the lock. One bolt connects to the upper frame. One bolt connects to the frame to which the hinges of the door connect. In addition, the doors contain special cylinders that make it difficult to break them. Please do an episode

[@jamiecurtin2259]

Dude! Way more fun and natural! first time watcher of this channel compared to ballistics. Keep it going this channel will beat the charts!

[@toothless01]

That is awesome.. might put a higher tooth sprocket on the rear to gear it down a little and it'd be unstoppable. 🤘🇺🇸

[@rickcimino5483]

I hope you appreciate how special it is to be able to have fun with your dad at your ages. What a treasure. Makes me miss my dad.

[@andrewmyers1313]

Yes of course do a third we love this channel as much as Kentucky ballistic if you make the videos we will definitely watch them !!!!!

[@TC-bz9dz]

yes do a part 3 flex seal sounds like a good idea....love you and pops

[@Driveby-Viktum]

Scott & Scott ........................................ Best redneck car channel ever. This is what we did in WV when we were teenagers. " Lets make a Honda scooter into an offroader" was one of our bright ideas. =)

[@fuckbiden3677]

Definitely need a part 3, you guys are killing it, keep up the great work

[@cooltechdreamer]

Extend the exhaust above water also just incase it dies, won't suck water back in, great video keep up good work!

[@rlo5626]

They raise them kinda nutz in Kentucky. Luv seeing you and your pops doing videos.

[@DinnerForkTongue]

7:49 sounded like the front fork bottomed out. After all, Scott is a big guy and that's a steep drop.

[@BionicFreakOfficial]

YES, do a part 3! These are my favorite kind of videos!

[@choppertcp1045]

Extend the exhaust that way when it cuts out or shuts down no water will run back into the motor. This was great!

[@typical_jahh]

Scott say flex seal everything🤣🤣🤣17:00

[@zachw9128]

Whenever you have a waterlogged motor like that you need to pull the spark plugs and then turn it over that way the Pistons won't be compressing the water with really just breaks things and it will evacuate the water out of the cylinder heads. Very cool idea and it was awesome to watch as usual!

[@anchopanchorancho]

Scott, you're a treasure and put a lot of thought into all of your channels. Thanks for the content! I'd love to see you set a good example for the little'uns and protect that brain/asset by wearing your helmet.

[@van7887]

Loved it!!!! Your dad is a flippin’ genius!!!

[@kenrussell1093]

Scott, you are the man, along with your dad. He's pretty cool, and it's clear where you got your craziness from! I would offer a small suggestion on your snorkel. Turn your vacuum head/snorkel around to face you. When you hit the water at high speed, and the wall of water hit it, I knew you were in trouble. So much for my armchair motorcycle expert input. If you reply, say hi to Leo, my nine year old son, who is a devoted Scott fan🙂

[@sputsputskeeskee7113]

Definitely do a third video. And looking forward to seeing you in Sturgis with the truck and matching motorcycle next year. And please,by all means, enter the bike in the custom bike contest.

[@user-SgtArmoroldtanker]

Sometimes, when you get a bike drowned out by water- you can pull the plug wires off and attach the wire boot loosely enough that it makes an arch between the plug wire and the plug and it will increase the spark to the plug and the motor will start after turning it over several times. I don't know exactly how it works, but I've done it many times on several different make bikes after going through deep water in rain storms. Also, on carburated bikes you can also open up the drain screws on the carburetors and let them fill with fresh fuel.

[@alexmichael6796]

Hey scotts, I'm not sure about the laws in Kentucky but Mike from Streetspeed717 just got in legal trouble in Pennsylvania for driving his truck in a creek. The state said it was a form of pollution and he got fined a good amount for it. Just letting you know in case you could end up in the same situation.

[@wildkat222]

We have 2 rebels and I have been in the woods so deep on the one I used to own...crazy! My new old one is just eye candy and looks and sounds good!

[@dennyliegerot4021]

Has potential...but, couldn't help myself and have compiled a list of simple but needed improvements. An interesting idea would be to set up an offroad race/fun run using modified street bikes for a course consisting of creek riding, hills, woods and fields. Think Enduro similar terrain with more creek time (snorkels) set up either like a short lap Hare scramble or vintage ISDT qualifier. You would have to use stock engine/frame in all bikes and classes could be based on modifications, displacement, number of cylinders, running chains or knobbys.... you could even have a pre 1975 vintage offroad class...just a thought. I live in NC so I'll make the drive.

[@justinfrazer2431]

G’day Scott’s . You need to Turn the snorkel around , Bring the exhaust pipes up the same height as the handlebars and Seal the battery in box …love you work .ps I’d like to see some build videos too Scott senior 👍

[@danefoss9679]

I really liked the chains on the tires! Funny, it was the first thing I noticed and the last thing you talked about...

[@thebigokie6.4_392]

I love the fact that your dad does all the filming on the Kentucky ballistics channel. And I really love that he gets camera time on this channel. 👍🏻

[@joeyhardin1288]

That was fun. The snorkel was pointing up when it should have been turned down. I think you need to get Ralph down there to that log and teach it a lesson with some 1/2" chain. God Bless and stay safe.

[@JohnsAwild1]

Hell ya I would get a smaller front sprocket for it if it where me it would give it more power less top speed. Great video bro. And yes flex seal the coil and plug wires

[@mustafaabid485]

We want both part 3 and other projects. Well it held pretty good in the creek

[@EddieSprouse]

I had no idea you had this channel. This is the first video on this channel I've watched. Durrung the intro before I saw Scott I was like, there must be something in the water in Kentucky! 🤣🤣🤣

[@ryanwesthoff5746]

I seen the title to the video and was immediately like, "This is gotta be the coolest thing ever." And it was.

[@Reldez_1]

Man, I've been planning on turning my little Rebel into a scrambler for a while now just as a goof. Can't believe Scott beat me to the punch.

[@jeffwestbrook6570]

Try this Scott, put some check valves on the exhaust if you can. similar to what a tractor has. That should keep some of the water out of the pipes. Also cut at log out. that was the issue, that log makes you loose momentum. If that was out of there, I bet you make it no problem.

[@billbeal9308]

Love it! Great Fun! Try snorkeling the exhaust.

[@milesra22]

Scott I love the new look on you truck! It looks awesome!

[@eightfooter88]

That was great!! Definitely need part 3

[@wylecuplin3044]

Scott I think you’re crazy, and I love watching your adventures. Definitely a part three.

[@jamesfrady3798]

Seeing you on the bike reminded me of the terminator in T2 so much! For halloween would you do a scottinator/terminator video? I think that would be so cool on either the Kentucky kustoms channel or Kentucky ballistics!

[@bobbywolf9644]

Maybe that should be used also on Kentucky Ballistics as well for getting to & from your targets at long range. Love both shows Kentucky Kustoms & Kentucky Ballistic.

[@jakebeasley3578]

I think we need some more videos of good ol Ralph running stuff over.

[@zakk5887]

I used to hate the way your truck looked, but Holy crap does it look good now.

[@CurtF94]

8:27 the way he moved his legs 😂😂😂

[@generallymexican8978]

Yes and no to water proofing. I want it but you guys always do good work so I'll be entertained by anything

[@thomasreimer1767]

Hilarious as always 😂. I hope for a part 3. I bet when the engine died water came through the header into the engine. As long as you won't let it stall you can't stop the little Rebel.

[@justinf3278]

That was awesome. It did great for a bit. You are definitely on to something. U guys got it next time

[@redbeardoutdoors4914]

Dangggg riddddeeee that clutch 😂 great content as always man!!

[@kakka_karot_cake]

Make a part 3 PLEASE!

[@mauricioruiz9021]

Definitely keep going with this project!

[@chadm6805]

Came over here from your main channel on yelp latest video.. good stuff, part 3! Wonder if the plug is out and you crank it if water comes out. Maybe sand got in the exhaust and clogged it.

[@Random42]

My first bike was a Rebel. Kinda wish I had kept it for projects but I traded it for a LOT of tattoos so no complaints.

[@biohazard20161]

Flex seal paste around the snorkel. Extend the exhaust pipes up at an angle so they are above the water level.

[@pariseau23]

Part 3 and part 4 keep it going .. Makes for fun videos !

[@adambrooks257]

Absolutely and positively YES. Waterproof it.

[@patsypjr63]

Yes! Bring us part 3, please

[@postaroland2014]

Really nice job on the little rebell! Thanks for the great follow-up video, I really like the motorcycle content on the cannel. I hope, that there going to be more of it🏍️🏍️

[@austinbeckett6475]

Loved the video Scott's! Thanks for taking the time to entertain us! Take a jet ski through the creek! Love this channel, keep it up guys and I'll keep watching!

[@MudSluggerBP]

lol major Ghost Rider vibes when you were going through the creek 😂

[@jacoblenting3742]

Absolutely a part 3!

[@lianguini4642]

This shit straight out of Hill Climb Racing 2 that’s sick

[@Rebelx251]

That new paint on the truck is sick kinfolk

[@americanjoetv1390]

It's the exhaust. Love the sound shorter. But without constant high RPMs you'll have water intrusion. Exhaust extensions is the answer. That and keeping the water out obviously. Solid work though.

[@MrLilgump]

Drain bowls on carburetor. Pull spark plugs and turn over to blow cylinder dry. Dry plugs put back in. Drain airbox as well

[@carrollnorwood5133]

I am glad to see that I am not the only awesome person in this world you and your dad rock stay the path Godspeed son

[@brenthaymon280]

Hell yeah!!! We need a part 3. 😊

[@NitroAero]

Damn right man! Love to see part 3!!

[@aggrosaxon459]

Hell yes!!! 3rd video for sure both Scott's lmao

[@ArseniosHarrington]

Nice! Also repping that Jocko merch I see!

[@bryanhenry6876]

Love to see part 3 !!!!!!

[@TheMotionlessGrave]

We need a three!!! Random thought, maybe put just silly straight up☝🏼pipes on it. So like the tips are over you head Scott.

[@lindsayweyrauch7419]

Keep the exhaust out of the water you need to snorkel it to and then you can run it up to the handle bars love it keepnit up

[@christianmuller9800]

Yes i would love to see a part 3 !!!

[@timothystern5827]

Add a skid plate, and snorkel your exhaust pipes... also put a clutch drive on your front wheel, where the power can go to the front @70% the clutch back to the rear... especially if your main purpose is off roading.

[@kevinkemler1367]

Yes! Go for a 3rd!!! That bike looks awesome

[@jeremybasham68]

Scott brother I hope you are staying high and dry from all that water you are getting you people need a big dam boat all that water you are getting in Kentucky it's bad here in Tennessee too I would like to see part 3 sir your Cousin from Tennessee be safe and God bless the people who are getting to much water in Kentucky . 😶‍🌫️🚣‍♂️

[@mightywhitey946]

I wish I had imaginative neighbors like Scott Sr and Jr. Awesome video, guys!

[@Rob-sr9rj]

Use electrical grease on all the connections. It'll keep water out. Check the fuses. Also maybe some high octane fuel.

[@williamapple9550]

Definitely do a part 3 I want to see smoke stack exhaust

[@JaySlow7]

Make sure the carbs overflow ports are routed out of the water or just plugged up since they arent going to drain anyway. Also might want to try to waterproof electronics somehow. Good luck with part 3!

[@robseguin2712]

Yes a third video... Some type of snorkel on exhaust too....

[@matts4852]

Hell yeah, more motorcycle content!

[@addos7965]

Bring in part 3 completely sealed up bike would be hilarious 🤣

[@carrollnorwood5133]

My mom has a rebel it’s been sitting in the garage for like 10 years plus I’ve been dying to do this to it thank you for the encouragement and like I said two more hands I can give them up for thumbs up