I Switched to the NZXT H9 Flow PC Case

[@PhatChantz689]

Dan uploads the best tech content. (Please let my family go)

[@DanKamYouKnow]

👀👀👀

[@amb_13]

😂😂😂

[@beanspud1623]

What?

[@Nameismonkey]

​@@DanKamYouKnow why do you have 6 eyes 👀

[@muanpuiafanai5604]

​​@@DanKamYouKnowthis ia the best case for a budget and for normal for me...i also use it and loved all the edges and the design of it oh i mean the h6, not the h9

[@ohgodhelp.]

I literally just made the decision to change to this case thanks to this video!!! Havent started the work yet but I am so happy with the case and cant wait to get started!

[@DanKamYouKnow]

Congrats! It’s a really fun and easy case to build in, lots of room. I just ordered a vertical GPU mount that I’ll be installing next week. I will hopefully drop that video next weekend if you’re interested in that process 🤝

[@ohgodhelp.]

@@DanKamYouKnow Ill for sure be watching that!!

[@justanotherfng556]

I just got this case and got my new setup put together. Sadly a repair shop has it now because there's no display when you turn it on. I7-14700f 2x32gig trident ddr5 sticks and a 4060ti 16gb. Can't wait till it's up and running. Yours is so much cleaner then mine is though. I'm terms of cables​@@DanKamYouKnow

[@danielhodgson7583]

Only 9 months later, and it still looks a sick build! I have just purchased this as an upgrade from the H510 Elite (Terrible airflow) thinking it was going to just be a nice case change... oh no, need new PSU to handle all the extra fans, going to change the fans as the NZXT have went backwards with the FAN connectors and now a 360mm NZXT Kraken series AIO cooler. Wish me luck 🤣

[@Chuck____]

Dan the cable management man💪 looks unreal 🔥

[@DanKamYouKnow]

My man 🤝🤝🤝🤝

[@Screave]

I honestly took inspiration from your videos to start upgrading my own setup from scratch. Just recently ordered the H9 Flow and a Kraken elite and also the Lian Li fans (mostly because it looks super easy to use). The most expensive parts are still on hold, but it will definitely worth it :D

[@Lorraine7]

Where do you order all that?... Amazon?..a specific website?

[@ion_force]

I'm trying to build one of these on a budget and I am learning some hard lessons about reality right now. Almost got it running! But it's not super pretty and I seem to have installed the pump backwards. You live and learn.

[@brotherjason2871]

I just built my first computer using the NZXT Elite. Super satisfied, and still kinda in disbelief I did it. No problems with temps because of the AIO and ten fans. I did mount the AIO on the side though because I wanted to see the RGB through the top glass. She looks beautiful. I love this case.

[@MidnightMan1961]

After watching the ease of installation and how good the H9 looked, I literally just cancelled by order for an H6. Was worried my 360 aio wont fit as an exhaust (top), and that the GPU power connector would hit the glass, with the H6. Thank you very much for your H9 review (including the vertical mount workaround suggestion). I just subscribed for thanks (and and to see how the H9 vertical mount looks). Affiliated links to the case and vertical GPU kilt please.

[@DanKamYouKnow]

Thanks so much for the comment! While I have not done a build in the H6, I really enjoyed building in the H9 Flow. Used that build for almost a year until recently. Here is my affiliate link to the case: amzn.to/4c0iyZA And I highly recommend using the NZXT vertical GPU kit: amzn.to/452OnhQ I did a video where I installed the Cooler Master vertical GPU mounting kit, and it worked fine. But the NZXT vertical kit is more of a perfect fit for the case (because it’s made by NZXT). And thanks for the sub! I appreciate it.

[@MidnightMan1961]

@@DanKamYouKnow case ordered from provided Amazon link above just now, but going with the coolermaster in you installation video which looked fine and saves $50 over the NZXT version which has a two weeks shipping time from Amazon Japan-lol atm).

[@LilVexxed]

This is one of the cleanest builds ive seen

[@wazjoony]

Lovely build ! I have the h5 flow myself and it’s a vibe.

[@bigd6326]

Im in the same boat as you, got my h9 flow, wanted to add NZXT rgb fans but they make no financial sense, they require 2 controllers and the wiring is a nightmare compared to the lian li infinities.. looks amazing and thanks for giving me a tour before i make the jump with the fans! Just a heads up that lian li does do the infinites with a reversed blade. So you can have the infinity mirror showing even with intakes.

[@DanKamYouKnow]

Yeah, the one cable per fan group is the way to go. Easiest cable management there is with this many fans. Only thing that sucks is the Lian Li software makes my PC idle much higher than normal, so I have to make sure I turn it off after it boots and loads my profile. The reverse Infinity fans look cool, I don’t think I can spend another $200 to get the 6 I need for intake though 😭😩.

[@DatHondaBoi223]

If you can find the reverse blades in stock anywhere 🙄🙄 I found an Amazon listing, tried to order some before Christmas and they never shipped after 2 months so cancelled. About 2 months ago I saw they had reviews of people actually receiving them again so decided to try it again, it’s been 2 weeks, still not shipped again lol. Idk where else to get them as the nearest microcenter is 5 hours away from me

[@mikari0YT]

I really love the way you do your videos!! The way you go into detail and show the little intricacies of the case (like the mirror on the inside) is really nice to see. No useless money shots or overedited scenes to generate clicks. Just a really honest view of the build youre doing. Youre the best ❤

[@DanKamYouKnow]

Thank you so much!! I appreciate that, more than you know. 🤝

[@Brigade069]

Just switched to this case from the Cooler Master Cosmos M. Much smaller but nice near same build have a 4080 super, 5900x also.

[@Zettifar]

Got this case coming in the next 2 days, Really excited to move my build to it this weekend!!!

[@Merknilash]

I think it looks fantastic. I'm a sucker for these types of looks. My last 3 builds were fractal r6, fractal r7, and then a corsair 5000d. I like them all, but this one looks exquisite.

[@4ujase]

Great video, thanks. Only just purchased the NZXT H9 Flow in preference to HYTE Y90. The latter, not as thermally efficient and if I had gone with the Y90, my vertically mounted GPU would be right up against the glass. My system will be based on the AM5/Ryzen 78003XD. AIO is 280mm Bequiet and supporting case fans also Bequiet 120mm fans. I will go along with the exhaust 3 case coolers for the side panel but since my GPU is vertically mounted, I think it would be better to place the intake at the base (3 fans), because there's no obstruction from the GPU and the cooler air would push up the warmer air upwards into AIO 280mm exhaust fans top of the case and side exhaust fan 120mm. I may opt to change to your setup if I'm not getting the desired outcomes :)

[@CC-bn2ws]

Used this case as part of my first build in about a decade. Probably the best cable management I've ever done, still poorly done but looks like a pro compared to my old builds. Nice watching these videos to see how I can improve, what I can add to it, etc. Kinda miss adding a cd/dvd/br drive, so was my first use of a usb drive for adding an operating system, using ubuntu for the first time in 15+ years too, missing windows 98, xp, and 7. Overall happy with the build I've had for about a month now. Your build looks really nice all lit up, and clean. Curious on switching out fans. This is a super quiet computer compared to my last one, a clearance prebuilt...but wondering what changes I would get switching to say be quiet fans, or the power output needed to ones that light up, how much of a difference those make.

[@luisordaz10]

I been missing out 😢 keep the grinding

[@DanKamYouKnow]

Good to see you Luis! Hope all is well. You’re still rockin’ that same PFP too!

[@kanive1566]

The build looks really cool. If you wanted closer to neutral pressure you could decrease the rpm of the 6 intake fans relative to the 4 exhaust fans.

[@Hartley94]

💡

[@DanKamYouKnow]

Thanks Kanive! Positive pressure is usually more ideal for temps and they’ve been great so far. I usually keep them all at around 900-1000 RPM, up until about 60c, where they slowly ramp up and up. Good blend of quietness and performance.

[@DatHondaBoi223]

@@DanKamYouKnowdo you use bios for fan control?

[@austinjackson9650]

​@DatHondaBoi223 I know this is a really old comment lol. But I'm prettybsure he used Lian-Li software for fan colors, speed, etc. Then you disable the app so it doesn't keep coming back on randomly in the background. You can use Bios, but normally bios limits you to a certain color(or full range "rainbow fans"). But, if your fans are only one color(like blue-white in the video) you can use bios only.

[@joshyomama9979]

I really hope evga start making gpus again. The ftw3 is just riddled with rgb and i love it.

[@DarkHorizons78]

I just used this case for a gaming build last week. I also don't like the placement of the psu mount. The 16pin gpu connector barely reached to my gigabyte OC 4080super. My card has a weird spot for the connection. But i kind of like it that way tucked in there.

[@rx5714]

I am Japanese.I'm sorry if it's unnatural because it's an English translation. Coincidentally, the configuration is exactly the same as the PC I'm trying to make. As a result of wondering whether it was black or white, it seems that it was the correct answer to order a black case and fan. The uniform white color of the lights shows your good taste. Although it is a mirror fan, it is recommended because the reverse rotation version came out.

[@DanKamYouKnow]

Hello! Correct, for this color combination, you will want a black case and black fans. I use the Lian Li software to make my fans white.

[@StillMasoroni]

Absolutely love the vid! ❤ (my family is starving and I miss them. Please let them out)

[@DGCastell]

It was a matter of time for NZXT to catch up on this desing. It's funny because when I saw this case launch, I inmediately remembered your build on the HYTE, I guess it was memorable because I saw it first in your channel. It sucks that there's no stock on the GPU bracket, that's one downside from NZXT, they never seem to have stock on a lot of products.

[@DanKamYouKnow]

Yeah, their availability for products is bad. Don’t know why they don’t up their manufacturing process, like you said, everything is always out of stock. I miss my Hyte Y60 build, really fun case to build in.

[@ZioGiGi]

Looks awesome dude, this case was in my sights but opted for the lian li vision. either way beautiful build buddy.

[@gefo0]

I like the aesthetics of this build, but personally I prefer classic format. GL

[@RDBTheTechGuy]

Can you do a review or overview on your keyboard? It’s so nice!

[@samuraiinate8772]

This build is awesome man! if you want a sleek board, try the NZXT board. i love the way it looks in my case.

[@DanKamYouKnow]

Dude! NZXT boards look so clean, and I love your build Nate. I believe they only make a B 550 I believe, while I currently have an X570. For aesthetics, the NZXT would be so clean.

[@theexpatgunner]

Looks good, I was considering the H9 but went with an EVO in harbor grey in the end for an upcoming build.

[@DanKamYouKnow]

Great choice! Love those cases.

[@ThatXNMdude]

I’m looking to buy this case for my next build. I want to use the NZXT DUO 120mm fans, and each fan has 2 cables running off it, and just picturing the cables from 10 of those is haunting me.

[@TheOneLandox]

A new upload, a happy me

[@DanKamYouKnow]

Appreciate the support, as always my friend 🤝

[@izenbice]

LETS GOOOOOOOO

[@DanKamYouKnow]

LFGOOOOOOO

[@adyanbtw9590]

bro this is insane looks sooo clean

[@DanKamYouKnow]

Appreciate you Adyan

[@Bhelzebuth]

Lianli Sl120 Infinity reverse blade looks amazing much better compare with your variant.

[@DanKamYouKnow]

They do look good but I already owned these before the reverse ones came out. Not sure I want to spend another $200 for them, maybe one day

[@niemoikein4330]

Awesome guitar man

[@DanKamYouKnow]

Thanks! I love my USA Fender Strat ❤️

[@AstralEclipse1]

Man I have a decent build but when I get enough money I'm going for this exact build

[@blackie75]

Now that Sid Haig is gone, you a shoe-in for the next Captain Spaulding dawg. Hit up that Rob Zombie someone!!! 😎

[@IamJack7777]

I'm in love with this!!!

[@DanKamYouKnow]

😎❤👍

[@YaboyOli101]

Love the case, getting it for my bday

[@kenpi1365]

I have the same case the front panel can be removed by the screws there are screws on the bottom of the case. side, and top to take it off. Also the elite version only has glass on top but the temp difference is minimal with proper fan setup. (1-3 C). You can side mount the rad and have 6 fans on it for better cooling as well. And the y40 is hotter cause the gpu is next to the glass which causes it be hotter. The cooler master vertical v3 vertical mount works with the case. The nzxt is impossible to get atm. With a vertical mount the gpu is 2-10 C more depending on your room conditions and the gpu. You can remove the plastic cover if you want on the cable management thing.

[@DanKamYouKnow]

Thanks for that. I should have specified more on the Elite version. How do you like the case and what build do you have?

[@kenpi1365]

@@DanKamYouKnow The case is awesome imo plenty of space for future gpus. My core specs are i9 13900k with the z73 and a 3090 ti by evga. (rip). The rad has 6 fans in push and pull on the side of the case. I compared the side and top, the side was better for temps. I would have upgraded to the 4090 but with the way current games are I'm just not finding the want or need to upgrade. I play at 4k but the 3090 ti gets enough fps for me. I have the vertical mount by cooler master it's nice but the higher temps are noticeable compared to horizontal mount gpu. EVGA claims that the shroud is supposed to be designed for vertical mount. However, in the case of the 3090 ti not great cause the memory modules on the backplate. I have 10 lian li al 120 v2 in my case. I also debated between the flow and elite got both but ended up with the elite. The flow did have better temps but only by like 2 C on cinebench r23. The elite also comes with 3 duo fans which have rgb on both sides of the fan and a controller which retail value is worth it but if you don't use nzxt fans then not really. I at first used nzxt fans but the cables were way too much so I went lian li. So that value was lost lol the controller only works with nzxt products. I also have lian li strimmer cables which is why I got rid of the plastic cover. I didn't care about cable management and shoved everything at the bottom tho lol

[@DanKamYouKnow]

I might have to try a push pull with the rad on the side, that would be a fun little experiment to try out. Honestly, EVGA’s departure from the GPU space is such a bummer, there isn’t any other cards on the market that I like, as far as looks go. I’ll probably stick with my 3080 until I decide to go 4K. For now, I am pushing 2 1440p / 144hz monitors ( one is an ultra wide ) and the 3080 does just fine, so it’s staying for a bit.

[@skullbones1014]

NOOOOO for the ASMR you need to include the sound of the clastic being pulled off the new computer!!!! lol beautiful build

[@lilbrogamer12]

Kratos making pcs before gta 6 😂

[@frog7118]

Have been enjoying your shorts for awhile. Just today, I was wishing I could subscribe to you and bazinga, found this video.

[@angeluorteganieves2539]

I own one its amazing. I wanted to see you do one of does fansy smoke endings

[@lindabreda6548]

@DanKamYouKnow has reportedly forgotten to install the motherboard shield 😮😮😮😮

[@Shakir_Mash]

5 thousand dollar setup is crazy

[@S4DB0Y_97]

A year on, what would you recommend... a lian li 011, the nzxt h9 or the nzxt h6... i personally would like to do a push-pull on the side inlets but i thought id ask 😂

[@_deadpool_reynolds_]

It looks super cool

[@DanKamYouKnow]

Thank you!! Appreciate it.

[@jz_mzf]

Might be a little late but I have to ask since the build in planning right now is almost identical. In the part list you provided in the description you typed ( x4 / 3-pack ) does that mean that I should buy 4 units of the 3 pack fans? And isn’t the rear fan different? And if I do buy the 4 units of 3, wouldn’t that mean I would have 2 fans left over?

[@rilenixx]

Hope you're well Dan. Great video. What do you think of the H9 black elite case?

[@i_Lndr]

Lovely build, i just bought this case to do my first build. Trying t figure out the fans, going to do the same setup as you and wondering if i should get reverse blade LIAN li for the intake.

[@WallUser]

LOVE YOUR VIDEOS

[@KingDiaz559_]

Gonna be ordering this fan would you let me know how what order your fan sync is with the controller for the infinity mirror fans please ps love how your pc came out 🔥

[@egsalty4170]

Hey Dan! Would you recommend to place the one rear exhaust fan (lian li) first, or put the motherboard on first instead? I’m trying to fit the same fan on, but it feels like a really tight fit. But seems you were able to do it.

[@obxerve]

Love the PC and all, but I gotta know.... where'd you get that lazy Susan you're using to spin the case around?

[@1sysop198]

looks good, bro...

[@DanKamYouKnow]

Thank you ❤️

[@mckenziecurry7511]

This case looks awesome I’ve been debating on getting it myself but how is the noise levels though is it relatively quiet? Awesome video again!

[@DanKamYouKnow]

With a bit lower fan curves, honestly not that bad at all. Depends on which fans you’re running but acoustics are pretty good

[@ASB14_Baraka]

Thanks for the video Dan. regarding the Lian Li fans, there are reverse blade fans, you mentioned that you've installed bottom and side as intake (I think the default direction for those fans are intake where the mirror is) and the reverse blade ones are for exhaust on the mirror side (for the looks) to be installed on the AIO and back, am I correct? as I'm planning on building the same case with fans however maybe a different AIO. Thank you

[@digiaotearoa5897]

Its a mean case bro ive been looking at geting this one

[@real_zepx]

hey dan love your videos. what parts would you recommend for a 2000 dollar pc?

[@roberttaylor9298]

Very nice!

[@DanKamYouKnow]

Thanks Robert!

[@kimhansendk]

It looks amazing! I'm doing the same build this weekend. I'll just be using NZXT fans and a vertical GPU mount. The only thing that I'm a bit unsure about is the position of the radiator (NZXT Kraken Elite 360 RGB). I'll have it as exhaust in the top or as intake in the side (push/pull). What would be better?

[@DanKamYouKnow]

Thanks! I have been running the 360mm AIO on top, which works just fine, but I’m curious as to whether a push/pull intake setup on the side would be more beneficial. I’ve had better luck with the side mounted intake on other cases, so I wonder if it works better for the H9 Flow. I will have to try this in the future.

[@nikko]

Awesome build. I would like to ask if the tempered glass is tinted? I am hoping that it is not(like on the white version) so that it'll have max viewing. I am also planning to put a figure in front and I can't decide what is the best color to get. White or black... Hoping to get your inputs. Thanks

[@DanKamYouKnow]

Thanks! The glass is slightly tinted on the black H9 Flow. With a little bit of RGB, you can clearly see all the components though, depends on the lighting you are going for. I do love white builds, but I feel like you have to fully commit to all white components for it to look really good. Some black and white setups do look good though. I normally always lean towards black, but that’s personal preference

[@jadedforlife17]

why the 30 series.. I can't recall. Was the 40 Super series now out then?

[@GerryI1]

Thanks for the good video. I have a question. I'm currently using Rog Helious (with all 4 stock 140mm fans) and Rog Raujin 360 MK I (with the small display) and stock Noctua fans on it, thinking about changing case (Phanteks NV9 or 7; O11 Evo D XL or NZXT H9 Flow). So question is which one is better for GPU and CPU Temp if any? Thanks.

[@RandomInternetUser69]

Having trouble fitting my single exhaust fan in place. You seem to have popped it in there quite easily. Do I need a bit more dad strength or am I missing something ?

[@SomeJustice19k]

Do you reccomend changing out all the fans? Or did you do so because you already had them on hand?

[@Škofa3]

Which one do you prefer? Hyte Y40 or nzxt h9 flow? And great content❤❤❤

[@csn2300]

i reccomend buy the gb - 001 anti sag braacket from lian li, it works very well and is hidden

[@DanKamYouKnow]

That’s a clean looking bracket. I ended up going with a vertical mount actually, and made a video about it 👍🏻

[@Chewy6909]

Dude please tell me you have a video on the MSI EZ fans?!?!?! I’m having big issues right now. Any help would be greatly appreciated.

[@toddmichael7501]

following your build to the letter- ? did you leave the screen filters on the top and bottom- will that dampen the air intake from bottom?

[@otisg3812]

Hey man, what desk to you have? and the size? attachments with it? thanks

[@spacemane_official]

just thinking about to switch from the h7 flow to the h9 flow bc im running a matt black build rn and i want a rgb build now XD

[@doom7652]

Yo I will soon use this case for my first PC built but you said that it could fit a 280mm radiator and I am pretty sure the one ur using is a 360mm radiator which isn’t the same one as in the links in the description…besides that you showed me that a 360mm could fit too so it’s alr

[@DanKamYouKnow]

The link used to be correct, but NZXT actually doesn’t make that AIO that I used in the video. The link now directs to a different cooler all together. The closest one now would be this 360mm NZXT AIO: amzn.to/3WlnGCl And you’re right, I used a 360mm in the video.

[@yoadknux]

Love your build, the fans look AMAZING. Do you have additional comments now on the GPU temperature? I'm interested in upgrading my Cooler Master H500P Mesh into this case and I'd be happy to hear your opinion (do you recommend any alternatives?)

[@DanKamYouKnow]

Shortly after making this video, I changed the GPU orientation to vertical (I made a video for it), but even set as vertical, the GPU temps are fine, even with a warm running card. The Phanteks NV-5, NV-7, and Liam Li Dynamic XL are all very comparable and better than the H9 Flow in some areas.

[@Wrxnchx]

i'm about to switch to the Corsair 6500X

[@LarryMcDonald08]

Do you like the Nzxt H9 or the Hyte 70 case better with the vertical gpu mount and cooling?

[@aang6421]

This, or the Lian Li O11 Vision Compact?

[@Hartley94]

Congrats.

[@DanKamYouKnow]

🤝🤝🤝🤝🤝🤝🤝

[@Hartley94]

@@DanKamYouKnow After Thanks for watching, I've been thinking "damn that's an awesome case". BTW which headlamp is that 🙏?

[@DanKamYouKnow]

Thanks! The headlamp is a Streamlight Bandit Pro. I used to use them all the time when I was a auto technician for Toyota. Now I use them for pretty much any project. Rechargeable, non bulky, and pretty cheap too: amzn.to/3Q7vbKp

[@Hartley94]

@@DanKamYouKnow Thanks, about the liquid cooler. Does it raise the temperature in your office easily?

[@DanKamYouKnow]

Even though it’s the same amount of heat output as an air cooler, I do feel like a radiator heats up a room faster than an air cooled PC.

[@calebfrancis8874]

Did you need a fan hub for the Lian Li fans if so what did you get?

[@Raven3557]

I was gonna go for the H6 flow but I wanted the arctic 3 liquid freezer so I ended up picking the H9. Do you think I can mount the aio on the side panel as intake?

[@loicbarthoulot197]

Yoo ! On the GPU Cooler, it's NZXT Fans or Lian Li on your build ?

[@LucaPerri-cy2mr]

What are the fans called? Love their rgb

[@explainercamp6073]

Bro, I'm your well-wisher from Bangladesh. I have a question, Where did you find these NZXT velcro cables that you used in the Water pump? Thanks!

[@DanKamYouKnow]

They came with my NZXT AIO. It’s the Kraken Z73 360mm AIO

[@explainercamp6073]

@@DanKamYouKnow Thank you for your reply and information :)

[@whitenukezz9481]

First person I heard that said the cable management is bad/horrible in this case.

[@Prokitess]

Will a corsair 12VHPWR cable be long enough for this case? It's 60 cm

[@a-animal1206]

Yes I use it right now

[@foggyrl]

How would you suggest a pc buisiness?

[@EmsSaLsizZ]

I have same case bro, nzxt H9 flow What should be the correct air flow in the case?

[@DanKamYouKnow]

Bottom and the side fans should be intake. The rear fan and top fans should be exhaust.

[@birdchips6886]

do you think its necessary to add 3 fans to the bottom? I'm going to use this case for my 4090 build.

[@DanKamYouKnow]

Yes, the more airflow to the GPU, the better 👍🏻

[@_B4rnaa_]

i have the h9 flow too, but in white😀

[@DanKamYouKnow]

😎🤝😎

[@qwordie]

im trying to build this somewhat same bulld but white but im having problems as its my first time building. the back fan wont fit on for some reason but multiple builds use the same fan and can fit on and im worried ive damaged my motherboard

[@Art-ef5vn]

Beatiful

[@Scrappygymrat]

What is that stand your computer was on?

[@christopherbutera4928]

question, does the elite version come with RGB FANS?

[@ThatOneBeatBoxer_BTK]

Is there a Way to take off the front glass panel?

[@doctorqwerty]

What desk is that? The tabletop is beautiful

[@DanKamYouKnow]

Thanks! It’s the IKEA KARLBY 98” kitchen counter top. It’s Walnut/Veneer, very nice cut of wood and craftsmanship

[@doctorqwerty]

@@DanKamYouKnow oh wow! I didn't realize how big it was in the video!

[@DanKamYouKnow]

It’s definitely a chonker

[@celianbsht]

wait so u can change the nzxt watercooling’s fans to lian li right?

[@CandieEdits]

Yes

[@gabrielwbi]

Did you manage to close the case with the RTX 3090 or was it tight because of the power cable?

[@DanKamYouKnow]

I had no issue with closing my side panel. It’s close but fits fine.

[@AtanEngessa]

Why did you go for the nzxt kraken with Lian Li fans instead of using the Lian Li GALAHAD II 360 with inf fans?

[@DanKamYouKnow]

That AIO doesn’t have an LCD screen like the Kraken does.

[@AtanEngessa]

@@DanKamYouKnow ah that's what I thought. Thnx or the reply! I'm going for almost the exact same build but with the GALAHAD II instead of the NZXT. Can't bring myself to spending so much more for just an LCD screen. Fantastic looking build and great explanation. Can't wait to start my build. Subbed because of the very clear and chill content.

[@DanKamYouKnow]

Appreciate it! I like the Galahad II a lot, because you can swap out the pump heads for different looks. When I bought my Kraken AIO, I don’t think the Galahad II was out yet, not sure. Sounds like you’ll have an awesome build! Appreciate the sub my friend 🤝

[@ZeJiXx-1]

Price Sir?