First PC Building Experience

[@bogxd]

I also learned that it's possible to unlock +15% CPU performance by scrolling back up to SMASH the like button

[@glxycozmo]

You should of got a 7800x3d and 7900xt it’s more expensive but a lot better for not bottlenecking

[@caseyzx]

kinda cringe call to action ngl but the video is solid 👍

[@jackietechlabs2081]

Also enable SAM (Smart Access Memory) (Resizable BAR)

[@jackietechlabs2081]

Also I suggest PBO Tweaking if you want to squeeze more performance and lower temps and overclock the gpu (this won’t up the power unless you bump the power and voltage)

[@NicheNick2003]

@@jackietechlabs2081 ReBAR is usually enabled by default on these newer boards, also PBO is nice to have on and all but it isn't needed with the 7800X3D in particular.

[@jhawar-ji]

I stopped watching PC assembly videos like 3 years ago. But for some reason I watched this entire video without a skip. Good work!

[@hikki134]

same here, loved it

[@skano1949]

😅😢

[@spicychess]

This is some sorcery cause I watched Hella a lot of pc building 3 years ago and stopped and watched this video from start to fi ish without skipping

[@devjyotimondal3066]

@@spicychess same man, this video was addicting

[@celyon6299]

same

[@melon7232]

The best (probably unintentional) PC-building tutorial on YT. Great job!

[@bogxd]

Ayee thank you!

[@CellzElite]

​@@bogxdsimple tip not necessary but recommended to put ur mb on its box that way nothing has a chance of being damaged

[@danielschultz3682]

Facts!​@@CellzElite

[@yacobe9968]

Real shit. I made a "Frankenstein" PC with a bunch of old parts just now. Experienced almost all of the same problems he had, especially with the fans and case.

[@nico2441]

agreed

[@GetWellSoonR.E.M.]

Considering you’re a first time builder, like myself, you actually made this experience way easier to understand than most of the pros! I felt like you were speaking my language as a first timer and included EVERYTHING I needed to know. Thank you so so much

[@Spawndex]

Hows it going, have you finished your build?

[@GetWellSoonR.E.M.]

@@Spawndex Not yet, actually. I’ve just ordered my parts and was watching some of these videos to keep my mind fresh on how to put the parts together. I’ll definitely update once the build is complete 😁

[@IwrsTheKing007]

same, I'll be getting the last parts soon and will also be building my first pc, and this is the first video where I was able to understand what all the cables connecting to the power supply are, I was always confused where what goes

[@Spawndex]

@@GetWellSoonR.E.M. @IwrsTheKing007 You're both gonna do great at building, just remember to use a bit more force than you think you should, the mistakes tend to be when you make yourself worried about it and you just need to make sure things are definitely plugged in properly, the RAM got me when I first did it because I was so scared of breaking something I didnt push it in enough! I actually thought maybe the dimm slot clips just didnt come up by themselves on my motherboard so i put them up myself like a dope but as long as you line it up properly you can push them in and make sure they CLUNK and the clips come up. If its not seated quite right you can feel it kinda pushing back a bit when you try to push, but it'll all go fine and just make sure you read the manual to check what slots to put the sticks in, its probably the 2nd and 4th slots. ALSO when I build I flat pack the cardboard box the case comes in and stand on that because my floors carpeted, and you wanna stay away from carpet cause of the static, but dont worry too much youd have to be really trying to actually damage something. Sorry for the ramble but I know how nervy I was the first time I built something, youre gonna be so happy when you flick the switch and it works!

[@ashketchum1244]

​@@Spawndex Yeah same thing happened to me when I build it last month, I thought the ram was fully in and when I finished the build, it wouldn't post and showed the CPU and Ram error LEDs. I even reseated the ram and it still didn't work. Until I did it a third time with so much more force than I originally tried with, it went in all the way and the PC booted up

[@a.s.805]

I've built close to 20-30 pcs and let me tell you that from all building tutorials I've watched out of interest (including linus etc) throughout the years, yours is the most beginner friendly out there - covering and explaining literally everything. Well done!

[@vlad_brk8732]

Hey man, is it important to ground yourself as you are an expert compared to me😅

[@a.s.805]

@vlad_brk8732 man dont worry about that - ive built like 90% of those without any grounding Touching your radiators should be enough to prevent any dmg but even without that you shouldnt encounter problems

[@vlad_brk8732]

@ thanks man for the confidence, how often do I touch the radiator and also should I pick everything up carefully as in by the sides so I don’t touch the actual pins or anything?

[@a.s.805]

@@vlad_brk8732once before you start building is more than enough Yeah thats a good Idea, just be careful but dont worry Follow this video guide for comparison and you should be good to go :)

[@Kylosgrande]

i want to build one for Sim Racing but ive got no idea how to start, hope this video helps

[@evandaignault]

I’ve built over 40 gaming PCs in my time (personal use and resale for spreading the hobby) yet I still find myself watching videos like this. Good job btw! Although personally not switching to windows 11 yet lol

[@shmoud99]

Geez that SSD instalation made sent chills down my spine

[@JusTheVex]

how so, and what did he do wrong?

[@turkeyisawesome]

@@JusTheVex bro didnt fucking watch the video

[@PS5CPU]

SSD: IDC

[@memesterlizer7536]

​@@turkeyisawesome no need to swear pal

[@turkeyisawesome]

@@memesterlizer7536 FUCK FUCK FUCK SHIT BALLS FUCK FUCK FUCK

[@golden_words0]

Step one: find money

[@vangelisandreakos6495]

Done

[@annaschlosserova3622]

😂😂😂 but same

[@Rasupubegasu]

I’m stuck on step one.

[@imab0t274]

Just commit tax fraud

[@Agonal]

Get a job and save buddy

[@Koozoie]

The fact that even though in this video you were still a new to this whole pc thing, and yet you explained things better than most *tutorials* out there, good work man!

[@LaugeHeiberg]

You're a very good explainer, I think a lot of us IT-folk that have built our own PCs cant really explain the difficulties because we built our first PCs in middle school - couldn't really explain back then; can't remember now. You're going through the different phases of this late enough you already have a good sense for how to explain what you're doing. I think that's a great recourse for many kids and others that are considering building their own PCs. Props!

[@eugenewong81998]

amazing work for building a computer for the first time. you did all the research on hardware compatibility, how to assemble a pc, what to look out for when you do it, trouble shoot it afterwards and made a really entertaining video for other people to follow it.

[@ALEX54354]

“I heard Linus say” the most reputable source😂

[@rockiecraft]

linus doesn't drop things. he just puts them down very quickly

[@gebackenebananee5743]

@@rockiecraft linus drop tips

[@truestbluu]

@@rockiecraft i wonder if linus put his children down very quickly

[@rockiecraft]

@@truestbluu oh no 💀

[@Ali_Malekiii]

LTT y e s

[@ankur-dhama]

If windows doesnt have the ethernet or wifi driver you can connect ur pc to ur android phone with a USB cable and enable USB tethering in Android and now windows will have internet connectivity so u can download drivers.

[@shakapaker]

Wow

[@bogxd]

Oh nice, didn't about this

[@hiddenguy67]

one of my favourite things

[@hiddenguy67]

I use usb tethering alot because of my trash wiif card

[@kristheredpanda]

i do this because my computer didn't come with a wifi card

[@nadtz]

Well done for a first time build. Solid no nonsense PC that met your needs.

[@eggyolk3157]

I cracked up at every “that’s what we’re dealing with”, but the best one was 16:28. Nice vid

[@impossibleisaac]

This video is so good. I’ve been wishlisting a PC for about half a year now, and I’ve finally got one. I used your video as a guide and found it incredibly helpful, especially with the cable management junk. Every second of this video was incredible and has saved me so much time building my own PC

[@janhradil]

Great job building your first PC man, welcome to the club! I built a few pc's and I have some notes that might help. 13:35 Daisy chaining PCI-E power like this is a bad idea. You should use two separate power cables because one of those can only handle 150W. Your GPU can go as high as 300W. You will probably be fine overloading it since you got a high quality psu - but it's better to be safe than sorry! 15:48 There's no reason to partition an SSD for OS. People used to do it on HDDs to have their OS on the outer side of the spinning disc which is faster. It can cause you problems since all the drivers and os updates will be forced to that (C:) partition. Even some programs refuse to install somewhere else than on C. You should be ok with that 100GB though, you'll see if it causes you any trouble. 23:20 The coil whine usually happens when your GPU outputs high FPS. For me it occurs at 500+ (usually just loading screens for me lol). If it really annoys you, you can get rid of it by limiting your framerate. You probably won't see a difference if you set it to 300 FPS.

[@OleksandrPanasiuk-h2e]

There is a good reason to partition any drive. If you decide to reinstall windows, you will format C drive and loose all data, that's why I prefer to keep all my data on D drive.

[@Comet1310YT]

about your daisy chaining comment, while you are correct running daisy chained off of one pcie 8 pin is usually fine. the 150W power rating is for an 18 AWG cable, which can only handle ~150W. the corsair rm series and other high end power supplies typically use 16AWG or sometimes 14AWG cables, which can handle well over 300 watts with no issues. i used to run my rx 6900xt daisy chained off of my corsair rm850x, and drawing over 400 watts and was perfectly fine. even still, using multiple power supply cables can help deliver "cleaner" power which can be better (although you will only probably notice it if you are overclocking a LOT, and i mean a lot, like subzero overclocking). theres no harm in running daisy chain (unless maybe its a 4090 or you have a really bad power supply), but theres always no harm in running all the cables.

[@uFii-V]

its also bad moneyise, you're telling the gpu and th cou to give it every ouncee of power it can when leaving the fps uncappedwhich means running on higher wattage levels which leads to more electricity leading up to a higher electricity bill. Just cap the fps to the hz of the monitor because you won't see the difference above 240hz assuming you wouldn't buy a 360hz or 540hz monitor.

[@uFii-V]

one of the best 1500$-1600$ budget gaming PCs i have seen, great job on the parts selection, it's nearly perfect.

[@dharmikpatel8439]

What would’ve been better as you say nearly perfect?

[@luukschouten9108]

how is that budget xdd

[@JaronPalone]

@@dharmikpatel8439I don’t think you need a 7800x3d for a 7800 xt so you can def save money going a lower end cpu and getting a better graphics card. Can get cheaper ssds, and the power supply is kinda overkill

[@maximus3294]

@@luukschouten9108 do you not understand the fact that there was literally a number next to it? any amount of money you set aside for your pc is a budget by definition

[@GOGOGOGOGOGOGOGottaGoFast]

is this the new price for building a new pc from scratch now? I remember 5 years ago doing under 1000$. When he said reasonable price I was expecting 500-700$ and then was shocked at the actual price.

[@NostraDavid2]

All in all, congrats with your new PC, and congrats on this excellent guide on how to build a PC!

[@ItzFyliop]

I'm still in the 7th minute and I alr knew how to build PCs, BUT, you basically resumed every single youtube tutorial in one so great job, I will recommend this video to anyone who wants to build their own PC. so much value in this video. what u are saying in one video, I had to go through 3 or 4 that are longer to get the same information. well done (my english isn't my 1st language so apologies xD)

[@ItzFyliop]

update, I didn't even know that Edge Startup thing! i also didn't know you could disable the snap windows features (the first thing I do when I get anything new is to see everything I can change and customize)

[@jeffisded1222]

This video that randomly appears on my feed a month after it was uploaded is unironically better than any PC Assembly video I searched for. Thanks man! Haven't built a PC yet but this video gives me the confidence to try. It's also nice to see where can things can go wrong or easy mistakes to make in the process.

[@galilelollel9658]

Fr. Imma build a pc soon myself and videos like these kind of relax me. Of course the first half was kinda easy plugging in but the second one was just selecting stuff on youre pc to install everythg and get itgoing.

[@danon3_3]

literally the best pc building video ever made, its gonna help me so much in a month when I'll be building my own pc. KEEP IT UP

[@bogxd]

Cheers!

[@PrincessofKeys]

Its nice seeing another first time builder build their own pc. Im still on the process of getting all of my pc parts before I can do that though. Gives me conference to try it myself. In all doesn't seem too hard if you follow the instructions and carefully put it together which is good!

[@voltavidTony]

I have some tips for your build: 9:40 The usb-c connector (type E connector) only goes in one way. Notice how one of the edges is wider than the rest. Specifically, at 9:45 you can see how the pins are slightly off-center. 10:40 NC is short for no-connection, meaning that pin is just a piece of metal used to fill out empty space (it's there so other connectors can't be plugged in). As it is, the reset switch is not functional and instead needs to be connected to RSTCON# and Ground (notice the two lines below these words at 10:42). 11:05 I happen to have the same case as you (except white). The 3.5" hard drive "shelves" can be entirely removed from the case so you have more room to work with the power supply. It also results in an opportunity for better airflow (not that it really matters down there).

[@soupdrinker72]

+ put the PSU in and route the cables around first

[@RMPInitiated]

🤡

[@ras.51]

@@RMPInitiated🤡

[@RMPInitiated]

@@ras.51 🤡

[@1600elo-s3c]

​@@RMPInitiated 🤡

[@NoIdeaReally]

I am currently building my first PC too, the youtube algorithm must've caught up to that and recommended me this vid. I got pretty much the same main components as you do in your build, I honestly didn't have the patience for the whole thing, especially cables, they really discouraged me and I couldn't find tutorials that made it any easier to understand the many cables, as a first time builder it can be really frustrating especially if your mobo brand isn't the finest with manuals (I didn't get a manual for some reason). You seriously delivered on a tutorial that I couldn't find anywhere! I am not a smart guy and now it's idiot proof. Thank you for motivating me finishing my build.

[@markolacic1519]

Clean, informative, all the way through, no BS, no time wasted, wonderful for beginner builders as it does save a lot of time and headache. Just a very well done tutorial, straight to the point, nicely done!

[@Spegando]

Actually great tutorial, ive watched alot of pc building tutorials and this is by far one of the best. One tip for you, your card is a very high end card that consumes good amount of power, i advise you to buy an extra pcie cable for your gpu (very very important for it to match the psu brand and cable type). That insures that your card gets enough power, and i strongly believe it would reduce if not eliminate the gpu coil whine you’re hearing. The main reason for this tip is that a single pcie cable supplies up to 175 watts, the motherboard gpu slot supplies 75 watts, you used a pig tail cable ( the split cable in the gpu) this doesn’t make the cable supply more power magically, though its totally fine for a lower-mid range card, an extra cable would give you the sufficient power needed. Excellent video and i hope i helped someone.

[@xxwraithxx8827]

the only thing the gpu will do if you run pig tail is it will try to draw the power it needs through the 1 pcie cable. 7800 xt needs around 266 Watt. so it shouldn't cause a problem. the only time I would go out and buy an extra cable for it is if i want to use a graphics card that needs more power or if the current pcie cable are bad quality. If the psu came with 2 pcie cables go for it, use both.

[@user-bm7ll1cu7f]

Interesting that you’re mentioning this, i just ordered a new gpu, the XFX AMD Radeon RX 6750 XT and i currently have the Corsair TX650M PSU. Not that this gpu is high end or what not, but i was just wondering if it’s just a plug and play situation or not. The 2060 i’m currently using uses one 8pin atm and the 6750 uses two 8 pins. I have two 8 pins available tho

[@TristanBurgener]

this is my favorite pc build video yet. so calm and relaxing. with subtle goofs along the way

[@ClappOnUpp]

I don't think you have to switch the power supply on before you touch it.. as long as it's plugged in. They're telling you to touch it because the metal is attached to the bond wire, which is bonded to ground. As long as the cable is plugged into it, you shouldn't need to switch it on, as that just connects the line and load sides coming from your service panel, completing a circuit.

[@natsu975_7]

i'm not new at all to building a pc but this video is the more complete 'ive seen i think and the fact that this is your first time is absolutely mindblowing

[@twentysevenkey]

I'm just about to do almost the same and for the same reasons, with a little higher budget and probably over prepared. The hardest step for me is probably just hitting the "buy" button, because i tend to over compare and analyze every single part with dozens of other options and combinations. Your story / tutorial is amazing, was fun to watch in entire length without skipping a second. Wish me luck and i hope you are going to enjoy this PC for a long time!

[@obeyobay9146]

This is actually a very helpful video for when I will eventually build mine, learned a lot of things thanks to you.

[@Classy_Car]

Amazing documentation. Everything in this video I feel like I went through. The only parts that I didn't experience myself was the SSD torture (hurts my soul), and the fan connector issues. You read directions perfectly, and got it looking professional. Props to you! Amazing first build.

[@PS5CPU]

SSD: I love torturing souls...

[@Ki6465]

I've been building my own PC's for the past 10 years. This was a great first time build! I love the subtle jokes and gags, really made me laugh. 😂 Congrats on your first build.

[@bogxd]

Cheers! I'm glad u enjoyed it!

[@vfgoditachyyy8446]

this video made me feel super confident in being able to build a pc. Greatest tutorial ive ever seen, cuz it was made by a guy that is also new to pc building, but informed himself thoroughly

[@tonyjohnson1580]

For anybody who is a first time builder, I would advise putting your cpu power cables into the motherboard, before you mount it into the pc case. This is where having a semi-modular or fully modular psu comes in handy. There is very little space for you to put the cables in these ports, while the pc motherboard is already installed. You'll have to get a flash light and if you have big hands like me use two to three fingers to push the cable into each 'cpu power' connector. This saves you a headache and time. You can then route these cables through the back before screwing down the motherboard. Also just like this guy read the manual each motherboard is different.

[@toebear]

i wish i saw this yesterday

[@tonyjohnson1580]

@@toebear you live and you learn. This used to not matter all that much back when motherboards used to put the cpu power in a more convenient place. Nowadays, they seem to want to put them in the back top close to the io and the top of the case, which means when you install your cpu cooler and then mount the motherboard you barely have space.

[@strange_thing-arra-3692]

LMAO you're timing is PERFECTO woah dude i literally just started looking into pc building a week ago

[@bogxd]

Nice, are you going to biuld it for gaming?

[@strange_thing-arra-3692]

@@bogxd not sure if i really will buy anything but yeah

[@starrymohannad]

I started look at building a pc YERSTERDAY

[@strange_thing-arra-3692]

@@starrymohannad lol noice

[@PomegranateJuiceSmoothie]

keep in mind all the new gen parts are coming out this year, and AMD just announced their new CPUs

[@halvardfoss9182]

Damn! I just bought almost exact same pc yesterday! And are also building my first pc! Have had the same scary thoughts about the grown up legos, so thanks for the video! Its kinda more easy to understand from someone in the same shoes!

[@ben-hurray]

Good luck 👍

[@LakayFTW]

I am an It-Specialist. Everytime i build a PC, i get nervous, i hate it. Nice to see you go down that path. EDIT: And i acutally learned something from your video.

[@dsk_1337]

You're a software developer. Not an IT specialist. You know how to type on a keyboard, nothing about system builds/servers and networking, etc. I'm an IT engineer, and it's literally impossible to have learnt anything new from this video. It was, however, very catchy, quirky and extremely funny with all the small jokes he made. I understand how appealing it is for people that have an interest in building machines. Great video, keep it up bud!

[@LakayFTW]

@@dsk_1337 Whats your problem man? 1. Yes i am a Software Developer. 2. system builds/servers and networking, etc. are basic subject areas in the training programme for IT specialists (regardless of the specialisation) in my country. That concludes that i am a IT Specialist specialised in Software Development. 3. I, in fact did learn something new from this video, how would you know? 4. It's nice for you, that you already did knew everything he showed. 5. Even if you are an IT Enineer, that does not mean you know everything about Hard and Software, most IT Engineer as well as Specialists and even Developers or System Integrators or Admins, can now a lot about other stuff of the big IT and are also be able to not know everything. What kind of IT Engineer are you, there are a number of subject areas in which IT engineers work that don't always all mesh together. 6. I do know a lot more than just "Typing on a keybord" but you seem to not know more than just being a dick. 7. You just cant know everything. No one does.

[@LakayFTW]

@@dsk_1337 nice of you, to just assume stuff 1. Yes i am a Software Developer 2. system builds/servers and networking, etc are a fundamental part of training as an IT specialist (regardless of specialisation) in my country. I also work on server systems as a hobby. Saying i know nothing other than just typing on a keyboard, is not very nice of you. Software Developer ist just my work title. 3. Since number 2 already specified what a IT Specialist in my country is. I can tell you, that i am in fact a IT Specialist, specialised in Software Development. 4. I did learn something new from this video, because you cant know everything. How can you proof that i did not learn something new, or that others did not learn something? You are basically saying that Bog's video did not give any useful information. Thats not very nice of you. ("it's literally impossible to have learnt anything new from this video") 5. Good for you that you already knew everything from this video. 6. You are an IT Engineer? Tell me, what did you actually do? IT Engineers are not doing everything, they also specialise in stuff, like Big Data, AI, Software Developtment or Hardware Maintanance like IT Infrastructures. Hardware and Software Troubleshooting and Helpdesk or first/second level support are not IT Engineer work. 7. I in fact did work as a Software Developer in a big company and i did work as a System Administator in a small company. Better yourself.

[@LimpurtFan6969]

@@dsk_1337you’re a loser 😂

[@dsk_1337]

@@LakayFTW Nice of you to take so much time out of your day to reply with absolute bullshit. Clearly clueless. Have a good day

[@APortugueseHome]

in my opinion, this is better than most of the 3 hour detailed tutorials

[@animatt1881]

I think the best thing about this video is the thumbnail. You spoke the world when you put the highest fps possible there instead of the price. Champion, you are the champion of marketing. You know what actually matters man.

[@BLASTIC0]

congrats on your new PC and your first build!

[@AzithromY]

Suprised how great you managed your first build! 3 Advices for your build I have which will boost its performance even more are: - Turn off core isolation in Windows ( default ON in Win11 and it c h o p s performance ) - Turn on resize bar in bios ( double digit fps boost in some games ) - Your GPU coil whine also could be managed trough undervolting it, but dont dig to deep. Undervolting is a too big of a rabbit hole xD

[@fornax985]

then SAM after resize bar in adrenaline

[@SportezMemes]

0:13 motherfu--

[@Fast-L-A]

Yes he is a ....

[@B_Kaizo]

This genuinely helped me so much and it was your first time? That's crazy

[@RicardoFlores-rd2cx]

Thanks!

[@bogxd]

Oh damn, thanks!

[@ethanxu7934]

So at 5:47, we can clearly see that he's using the AM4 Brackets, but yet the CPU he's using is an AM5 AMD Ryzen 7 7800x3D.

[@YourMothersFavouriteTerminal]

AM4 and AM5 require the same brackets

[@kuroibullen1639]

3 pin fans are voltage controlled, 4 pin fans are pwm controlled. You can just change the 4 pin plug to do either in the bios.

[@SohamNag12321]

This was an end to end instructive video! Really well done!

[@bogxd]

Cheers! I'm glad u liked it!

[@fundekz2617]

Couldnt find a video where i could figure out all the cables, but in this video you just really speaked my language. Thanks.

[@grdvncnt]

The MOST detailed Tutorial I have SEEN on KZbin. Great Job man. Amazing Video!

[@brentopp1ermore]

Bro made a tutorial with no experience

[@brentopp1ermore]

But really tho this is really helpful

[@askeladden450]

​@@brentopp1ermoreyeah far more helpful than those expert guides as they leave a lot of this stuff out

[@bruhhh69]

You made me watch your entire video without skipping. You got the flow!

[@DonLorcha]

Your such a good explainer Ive watch couple of pc building tutorial , and none of them is as clear and simple as you . No bullshit , pure info and tips.

[@princebanini]

Easy one of the best pc building videos i have watched this year. simple, funny and straight to the point. no gymmicks just great content.

[@likilikiki]

Honestly, this is better than watching a "pro" build a PC. Because they won't show the little problems you run into like you did.

[@velitasali]

You should route 2 pcie power cables to the gpu from the psu instead daisy chaining single one. Also, the fans that come with Corsair 4000d are not PWM, that is why they are only 3 pins.

[@MoutonBinoclard]

Very instructive and and fun to watch, very nice vid ❤

[@bogxd]

Cheers! Thx for watching

[@_GreyMatterTech]

This build was more fun than a LTT build. Noice

[@pheldsparr]

21:30 reminded me that a UPS (uninterruptible power supply) is a very important thing to add to your PC build. You won't have to worry as much about the power going out because if it does, the UPS can provide power for a short while.

[@zami3333]

unironically this could be used as one of the easiest and beginner-friendly PC building tutorials ever, very informative

[@vvsabro]

"All within a reasonable budget" bro the R7 7800X3D is one of the best processors out there

[@BamberBains]

holy moly the parts selection is litterally perfect

[@luukschouten9108]

rtx 4070 super wouldve been better imo

[@azure4718]

@@luukschouten9108 nah 7800xt price beats

[@xovgamer]

​@@luukschouten9108yeah

[@elijah_m]

This is the best tutorial I've seen on you tube, good humor too. Nice 1 bro.

[@GamerBryce]

i like how this video is better than every other pc building tutorial i have ever seen and its your first build. nice job!

[@overspend]

great channel bro (btw when windows app iceberg part 2)?

[@bogxd]

Ay, thanks! that's a good question

[@darkmadrap]

4:23 thermal pads not thermal paste .

[@Panvi10]

Me on my old acer 2013 trash intel celeron laptop rn:

[@Dizzy_again]

You can honestly build a pretty functional gaming pc for $300, you just need to know what parts to get.

[@Panvi10]

@@Dizzy_again the point is that its from 2013 so i can't buy a new one (i am broke)

[@vinson3725]

​@@Panvi10 Mine is from 2005 lol

[@Panvi10]

@@vinson3725 oh damn

[@Panvi10]

@@vinson3725 i dont use it but i have one from 2006

[@Red_car8]

The best pc building video ive seen so far. no bullshits, straight to the points.....

[@umm_toastness9033]

u easily earned my sub. this was enjoyable to watch as i waited for my parts to come in the mail for my first build and your windows setup part helped me a lot because linus doesnt talk much about the actual step by step guide that I saw. the "thats what we are dealing with" and the hmph noises were super funny and engaging

[@medivyanshsingh]

18:45 The hell! isn't this by default? so i have been running my monitor at 60hz all this time??? Edit: oh man! day and night difference... my life was a lie🥲

[@noelvalenzarro]

Ignorance truly is bliss

[@Glowzz_Btw]

2:13 do i acualy have to do that with my power supply

[@mrcreeper194]

its only for the static electricity

[@Glowzz_Btw]

@ ok

[@pattyd343]

@@Glowzz_Btwno

[@Glowzz_Btw]

@ok thought it was kinda weird

[@AlwaysPumpedTV]

excellent work

[@jess2690]

Well Done! I've always believed the little front IO cables are the most tedious (i messed up so much on my first time there). This is so comprehensive that I wish i had this video years ago when I first stated building them. Great video for first time builders!

[@max_wav]

Absolutely loved this video, you explained everything very well and precisely. I'm helping my friend build his computer soon, and I wouldn't have known about the bios update, let alone motherboard drivers lol. Thanks for the great video!

[@Wombat19]

8:09 Thats what HE said???

[@Okitseroleh]

😢

[@sanchogodinho]

Your PFP makes it much better 😂

[@MttlJonas]

W for going with AMD nvidia is just overpriced atm

[@Lelouch-]

What about 4070s?

[@Lelouch-]

Oh sh.., in my country they are sold at the same price, although on Amazon the 7800xt is $140 cheaper.

[@Coverpage2568]

But everyone don't buy a GPU just for Gaming , Productivity is also important in which AMD is bottom of the barrel even 4060 is better in productivity than any AMD GPU even top end ones.

[@JoseBSL]

​@@Coverpage2568 From someone who used both, just don't get started there, don't. Even those ARCs from Intel are almost as good, with interesting features (although they lack a lot of others)

[@Warned.]

womp womp

[@gdplayer667]

Step one: Fight the urge to buy a rtx 4090

[@Aei_1985]

Step 0: find the money for the rtx 4090

[@uudta-panchii]

Step -1: have a will to live

[@racergsxr1]

Been building PCs now for 12 years and I still sat down and watched the entire thing for some reason. Gonna be making my own 9800X3D + 7900XT build after the GPU and case come in on Dec 2nd, can't wait. I've never heard about the "Start Boost" with MS Edge, thanks man.

[@Faasvaas]

This video was my guide the whole time. Down to earth and super helpful

[@carlabouantoun6152]

3:15 what HE said?! 🔥💀🔥💀🔥

[@sirviver4708]

this is literally my build

[@SwordistSoda]

Step one: Somehow get amazon to work in your country 😭

[@Horizontalclashes]

Real Detailed , Many things Which I didnt Knew Before !! Thanks Bro

[@munyvgm]

This is a great video! I'm going to build my PC tomorrow and turns out you're using a ton of the same components as me (CPU, cooler, case), so this is incredibly valuable to help me! Your presentation style is incredibly intuitive and easy to follow along! :)

[@Alccce]

I haven't money

[@toads8748]

The Motherboard you chose is terrible value for the money, you could've gotten something much better for the same cash. Other than that, stellar video

[@Stefan_Uros_IV_Dusan]

Good for a 1.4k pc💀

[@almightybogza]

Nicely done for a first time build ! Good part selection within budget ! I love this video, it reminded me of my first time when I was scared to not break anything. 1 thing to remember going forward is that the components are decently strong. You wont break anything if you apply a bit of force.

[@nodo8840]

In 1.5 years of watching PC tutorials and bro really did it. The best tutorial out there. Beast of a PC, and good luck. Thank you.

[@bogxd]

Cheers!

[@mybeautifulcat7011]

​@@bogxd price ??? why you didn't mention the total cost of the pc ??? Not good 😐

[@Lil_curlyhead_02]

@@mybeautifulcat7011he did at the end

[@johnalexandrevasquezgodoy8743]

0:55 i just use chat gpt lmao

[@coleprins8381]

Literally

[@larserkelens1645]

you are sooo underrated the content is so great that i didnt even skip ONCE

[@Venikkk]

Congrats comrad! And also thanks for the tutorial and sharing the info you gattered!

[@darkkillerx29]

I think this is the most entertaining commentary on a pc building video ever

[@stefanso44]

Honestly this is my favorite pc tutorial by far. Love your content man 👍 👍 👍

[@MatCendana]

One of the best, most informative and helpful "How-to". It gives me more confidence to build my own for the first time. Thank You!

[@bogxd]

Glad to hear it!

[@buggy9643]

I was so on the fence about building my own or buying a prebuildt. But this video just made me decide its worth doing it myself, thinking of going with a similar build so i can use the video as a guide. Thank you!

[@michaelikupa8331]

Best tutorial that isn't exactly a tutorial. You're amazing bro. New subscriber

[@valerialtergott5782]

this bro first time he build a pc and instead of just building it he made a tutorial for other rookies searching for help love it :D

[@amiralingames]

Dude with you telling everything that i didnt know in simple terms now i know everything about pcs! Thanks man