I think I found my next case for the perfect casemod!

[@skrufff]

I'd love to see you do a mod on this, and near the end you expressed wanting to have solid panels to have more space to work on, and fyi this case DOES have a solid side panel version! Fractal is one of the few companies left that still does them and I love that. If I'm being honest it looks even slicker than the TG versions. Something about the entire shape is really enticing

[@carpenterpants]

This 👆🏻

[@deechvogt1589]

Yes please get the metal panels and case mod away! Loved your space mod cases of the last couple of years!!

[@kevlsnutt9967]

Same here, I'd love to se this in a build

[@eriklehman3175]

Will you start this one before or after the v8 theme build? Or is the v8 build dead?

[@evol3852]

If Jay builds something in this case I will be happy because we will have at least 3 episodes to look forward to!

[@KhaledAlfaris]

yes mod it, we'd love to see it.

[@ResumedPausing]

2:20 There should be a trophy given to companies that says "Gamers Nexus liked it."

[@matasa7463]

Steve Burke Award for Computer Hardware Excellence.

[@kevinshaw7670]

If I walked into a store and saw a GN stamp of approval on any computer part that would be what I would buy. No questions asked.

[@ThumberBulls6]

@@matasa7463 lol

[@ElTeeger]

Gamers Nexus Approved sticker coming soon

[@northwiebesick7136]

@@kevinshaw7670 I definitely agree, but, watching Gamers Nexus long enough, has taught me that I should never buy ANYTHING Because of BS stickers and badges... I mean, what if they faked it, and it is really a steaming pile of, well, crap??? Always watch Gamers Nexus for information first

[@phydeux]

Jay, the word you're looking for is "cavitating" rather than percolating. That's where the pump is flailing around unable to achieve a fluid seal and move liquid. Also, I could see you being able to do a "damage" mod like you describe. Just epoxy a sheet of similar steel on the outside of the glass panel. Or better yet, ask Fractal to make you one that you can then deform. 😁

[@fredscott3408]

I can see pulling all the cables through the huge top hole. Branch off and custom sleeve. Looking like a black root system. With all the slots in the mobo tray, you can tie down the cables on the inside of the case. So, it is plausible to make a nice clean wire harness for all the cables coming out at one place. It is plausible to make non modular and even semi modular cables look appealing. So many ideas for a nice and unique look.

[@IamSwarley]

I would love to see a case mod with this case. A naval “Admiral Jay” case mod. I’m sure you could make it work.

[@zwerker]

Are you implying that Jay likes boats?

[@user-ke1gn3ql1g]

Jay said he already had something planned for it :( But that's a cool idea ngl

[@75zackattack75]

Jay always acts like he's out of ideas for content, yes of course we want to see a build in a brand-new case. just do it.

[@IamSwarley]

@@zwerker Yes, I do! :D Could imagine that World Of Warships would sponsor such a video.

[@ilitsa]

Every time Jay says "Fill", I expect Phil to photoshop a picture of himself with a big smile onto the case somewhere. "Fill-ports" become "Phil-ports".

[@Destector.]

same :D

[@Metmovie]

Dangit, now I cannot unhear this.

[@robbiemer8178]

Yes, please do a modded case build with this one! And, it seems like this case with two 280s in the bottom, 2 in the front, and one 140 in the back would make for a fairly quiet air cooled pc. Lots of air movement and not too much noise.

[@bothellkenmore]

You really don't need to touch the fans in this case at all. 140's at the bottom get a bit too close to the bottom of an ATX MB connections.

[@jeremybarber2837]

Yes I want to see a case mod on this one! Also, love that they give you the tools/brackets in the box to flip the 180s to bottom intakes and the 140s to the front for AIO installs. If I was doing a full-sized build, it’d be in this case.period. The option for a solid panel would also be cool or buying the brackets piece meal to make your own.

[@captcaveman69]

I agree! That case is screaming for a full makeover, I like the idea of an 'Impulse engine' front lit in cyan, edging details in red-ish with a 'pulse' type of effect running from the front to the rear with some yellow coloured pipes inside the case all leading to the rear of the case being lit in a white light. Oh and I would just like to say loving all the vids you do, they are generally fantastically funny but definitely informative and always one of the first places I come to when I wanna watch something. Please keep up the good work and hope to see many, many more. Thanks for them all.

[@Fazeshyft]

"If you guys want to see me do a case mod with this case..." DO WE REALLY HAVE TO ASK, JAY?? Of course we do, an actual Star Citizen build? Hell yeah! Do you guys play Star Citizen? Stream that *beep*!

[@click3897]

Meh, what's the point of doing a case mod on this? It's not like he'll see it through and finish it. Where's that "engine PC" he was working on? 🤔🤦‍♂️

[@Fazeshyft]

@@click3897 Good ass question! I was really interested in seeing the rest of that. But, I can understand why he hasn't finished it yet. Just give it time. Edit: a case like this is very plain and easy to modify and map out. An engine block is much harder to plan.

[@LarryGanz]

Yeah but if it’s anything like the game, it’ll never be finished… bah dum bing Kishh!!

[@Fazeshyft]

@@LarryGanz Oooooor... It'll take for bloody ever and change the industry when I finally does.

[@andrewfarrugia2688]

Ditto

[@drtaru]

8:54 Those panel designs aren't unnecessary, it allows them to use a thinner gauge metal yet still have structural rigidity and prevents the panel from warping and making a popping noise.

[@MrBadclyde]

Was watching on my TV and had to open the app to make sure someone said it 👍👉👉

[@ImDudePlayinADude]

Jay is into cars, he should know this. a lot of fire walls look like that somewhat.

[@YOEL_44]

@@ImDudePlayinADude In fact in a lot of modified performance cars, some of the panels have drilled holes that are warped like this to increase rigidity while reducing weight

[@MrBadclyde]

@@ImDudePlayinADude meh we should let it slide. Jay doesn't script his videos as far as I can tell so I certainly will give him a pass. Not really misinformation but a bit of oversight in an otherwise enjoyable video.

[@ImDudePlayinADude]

@@MrBadclyde did Jay say they had no point? I don't recall I was just throwing out a use of them he would know of for sure.

[@gregorysheppard9392]

This case definitely reminds me of a ship engine pod, love to see a build, solid damaged panel like your corsair one mods. I would love to see if you could adjust the feet to offset it at a 45 degree angle think would look quite special.

[@32krod]

I also think it would be interesting to try to mod the glass side panel. I don't think I've seen anyone do this, but it might be a cool challenge. It'd be tough to get paint to stick, but maybe something like window tint or something with a fitting pattern?

[@carlosbatalha76]

Absolutely case mod Jay. As a star citizen build you could paint the tubing and rusting it a little bit in shades of grey, or blueish maybe, to make that kind of spacey starship old battle stations. That would be sick!

[@bigmaddad7689]

NIce case. If you took the panel in for a vinyl wrap, then you could do your airbrush graphics over the wrap. Or you could design your own wrap with fo metal tearing right in the wrap, then build your stuff over the damage. You could also get a metal side panel made in a machine shop, that can put vents and louvers right in the metal if you wanted to do something really Jay.

[@bbreaper4737]

I'd love to see that case modded out. You do some beautiful magic when you get creative. Big fan! Keep up the amazing content

[@michaelthompson9798]

That ''I-fix-it"' ad is still gold🏆🏆🏆🏆🥰🥰

[@Dudae_]

I love the previous case mods Jay did, but looking at how the Red Dead and the Engine builds went (having it been by creative stagnation, overall distaste for the concept after having started or whatever it was) I sure hope this time the creative juices flow into a worthwhile and memorable project! Can't wait to see what you come up with next!

[@citizenblue]

What happened with the engine build? I saw a video or two but then zilch...

[@YOEL_44]

@@citizenblue That

[@citizenblue]

@@YOEL_44 oh ok. I thought was a great idea for a build though...

[@YOEL_44]

@@citizenblue Yeah but he didn't feel like the material was up to the task, I think he explained something more in a Q&A or something, but it was essentially to much work to make it doable

[@northwiebesick7136]

@@YOEL_44 he said he was still thinking about it, but that he thought he might have a different, or better, idea, that might fill his needs better... Or something to that effect... I don't remember if it was a skunkworks build log, or an episode of RTFM he discussed it in though...

[@jacksontint]

I bought this case a few weeks ago and love it! I'm currently trying to fit a Alphacool Monsta 360mm (2x180mm not 3x120mm) in the front of the case. I think I may have to modify the radiator to fit.

[@DavidSiebert]

I really like this case. It is funny because I see it as an ideal choice for someone that wants a very professional-looking workstation. I f I was building systems for a firm that needs video editing, CAD/CAM, FPGA development, or just software development. Lots of cooling Big GPUs, multi-core CPUs, and big air coolers. The one downside is a lack of drive space but you can fit two 3.5s and you can get some huge drives now so you could have two in RAID which should do for most uses and if you need more drive space than that then a NAS or SAN is probably what is really needed.

[@thomasrulon3979]

I'd love to see a space battleship sort of themed case mod. I loved the destiny 2 mod and the star wars mod, I'm interested in seeing what you and the team come up with this time.

[@smoketinytom]

All you need to know is Steve at Gamers Nexus is very pleased with this case!

[@angeltensey]

well, it looks like properly ventilated case. but when it comes to watercooling and putting bunch of stuff inside...this case has quite compact usable space, to say the least.

[@YOEL_44]

@@angeltensey I've been thinking, if there's a way to dissasemble the feet and put the top cover in the bottom, it could make for a damn great inverted case.

[@wimpyhugz_TGK]

@@angeltensey Well, not every case has to be a watercooling case. I'm surprised Fractal even put fill ports in this case because you wouldn't buy this case to just rip out the two 180mm fans (which are 38mm thick btw, not the standard 25mm) and instead put a 120/140mm-based radiator in the front. There's some 180mm-based radiators like the "Alphacool NexXxoS Monsta 180mm Dual" which might be an interesting match though...

[@angeltensey]

@@wimpyhugz_TGK I saw some reviewers say that this case is a real full tower and has great watercooling potential which is ridiculous. Looks like they just fulfilling promotion task from fractal. Its limited watercooling options is unfortunate for me, because im actually looking fora new case (bored of my view 71,which is generic fish tank) and torrent's front panel is absolutely stunning. Reminds me of...kinda mid-20 century science fiction illustrations with monumental geometrical buildings made of mix of shiny metal and concrete.

[@kalichrome]

Jay’s iFixit ads are the only ads that convince me to buy the product advertised.

[@DifinityRelin]

You're saying you like your interruption being interrupted by an interruption of an interruption that was interrupting an interruption?

[@kalichrome]

@@DifinityRelin 100%.

[@Dingbat1967]

@@kalichrome Agreed -- Definitely the best iFixIt add evah

[@jdgindustries2734]

While I bought mine at Best Buy, I did buy iFixIt tools specifically because of Jay's ads.

[@kalichrome]

@@jdgindustries2734 Hell yeah!

[@kjevers1]

I remember when we used to mod the fans and intakes to look like turbo props with smooth transition zones. Jay, You must mod the holy crap out of this. Have a sweat lodge vision tour and GET TO WORK!

[@ImOnyxRS]

I think this would make an excellent automotive theme build. The first thing I thought of when I saw it was a Bullitt Mustang. That high gloss highland green exterior, the front mesh area black to look like a grill maybe if there is a way to make the filter itself a chrome like color underneath too. Chrome or brushed aluminum accents on the inside, maybe paint some matching green accents on waterblocks etc.

[@JudgeRightly]

"YES I WANT TO SEE THAT!!!" Am I doing it right?

[@knghtbrd]

U r doin it rite! Yeah, hey Fractal, send him some solid side panels and a couple of ARGB 180s for that engine! And Jay, don't feel like you can't redo the shape off the front a bit. 😃

[@deminybs]

Yes

[@pinsandscrews6459]

Yes, I want to see a modded build in this case. Jay, you're a Case Modder, MAKE A DAMN PANEL!

[@Outland9000]

You can get this case with solid sides.

[@xeekk]

I would love to see you do a build in this case. I’m also disappointed with not finding this case for sale anywhere.

[@SkyForce6700]

@Xeek Strange here in Sweden there is plenty of allocation one retailer have over 200 of them in stock!. But I guess Fractal design being a Swedish company put priority in this market. What country are you in?

[@xeekk]

@@SkyForce6700 USA

[@raydenhorde7214]

@Xeek Newegg has it

[@tech-adeptzeth1648]

Yes Jay, please mod it! There's so much space to play with in that case. Makes me really wonder what you can do with it all.

[@melvinbullock5674]

YES! Please do the case mod, I love to see the progression on those vids!

[@98Dime]

Jay speaking to motherboard: "Nobody wants you any more!" Me: I'll gladly adopt it!

[@MistedMind]

MY THOUGHTS exactly xD The board can have a nice relaxed retirement with me, too :D

[@misodent9794]

boo hoo my 9900k is so old and obsolete, sighh and my 2080 ti, cant even game in 16K at 300 fps, im soo unfortunate

[@kamakrazi]

Everytime Jay says fill, I picture a little Phil head bouncing around on the screen. 🤣

[@KillaBitz]

the Phil port

[@artisan002]

Same! It's to the point that I'm a little disappointed Phil hasn't done a little cutout of his own head, just bobbing and smiling, traveling along the fluid lines.

[@XiaolinDraconis]

I read this and didn't even think of the person. I imagined a little animated Phillips head screw bouncing around like Clippy. Now I want this as a digital assistant that pops up with stupid puns like "That's tight!" if I upvote something or "Screw it" when I downvote things.

[@ASOTFAN16]

Probably the only time you'll ever enjoy watching a sponsor spot, when Jay has an iFixit sponsor spot!

[@Dragon_Void07]

I can see the explosion

[@nocturnal101ravenous6]

He does it right, even his "World of Warships" add is entertaining. They should pay him double for the ads considering people actually watch them

[@seanripperger]

I interrupt this interruption to bring this interruption... Best sponsor spot ever.

[@willanrac]

Ifixit add is like the ONLY creater add i never skip. I literally just scream along with the commercial. AND THE NEW MINOOWW~~~~

[@determinedeyebrows4191]

I love this case. Built my first PC in it and it's fantastic!

[@Magnum.Bloodstone]

Love Jay'z video's, and the Star Wars case was incredible, so I hope he follows through with whatever he's about to propose in this video. Follow through, Jay!

[@cp37373]

Doubtful.

[@bigmike4133]

Absolutely yes I want to see that. I love the case mod videos.

[@kenzieduckmoo]

id love to see a case mod with this case, especially if you got fractal to send you the solid case door (they make a solid no glass one)

[@stevenkelly8999]

This case is awesome. I would enjoy watching you build in this case.

[@joshuamartindale4124]

Now you can get the full size atx torrent case with a solid side panel.....so...yeah...would love to see you mod it up! Love learning from you how to cut open, remove, add etc! And air brush! Love it!

[@StudioBrock1337]

"The manual said it was stupid easy!" I'm having one of those days too, Jay.

[@ScottHusted]

Yes, definitely would love to see a mod done with this case. Something with an industrial or military feel would be cool.

[@TheMitts]

Would love to see a star citizen mod on this case, pretty sure CIG would too!

[@Eugomphodus]

Yup, I want to see more case mods! Bring them on!

[@rashkavar]

I think you may have found me my next computer case. I was a little dubious with the top mounted PSU, but there's lots of good features: - full filtration on the intakes is real nice, as is a positive pressure design for my living space (I have carpets that generate a ton of dust, so keeping the dust from circumventing the dust filters is a really nice feature I wish my current case had the capacity to do.) - The $300 price tag (I'm Canadian, numbers get bigger up here) would have pushed it well outside of my acceptable price tag for a case, but the fact that it comes with pre-installed intake fans very nearly covers the cost of cooling for me: I'd just need one exhaust fan and whatever I go with for the CPU Cooler (I'm not a water guy, I'm both not the best at keeping up with maintenance and my attention to detail can vary wildly...I've seen enough of your videos to know these are bad traits for someone who uses water cooling systems) Looking at the prices, 5 of those same 140mm fans bought without the case would cost me $115 (I couldn't find a price for the 180mm fans, so I'm just using the 140 price for those...it would be more, of course. - The amount of open space makes it look very nice to work with. I'm used to fairly old school cases with massive racks of drive bays (my current case has 3 5-inch and 7 3.5-inch bays), and given the lack of need for an internal optical drive, I'd be delighted to just go to something simple like this.

[@benkonczal4584]

I’m just glad to see Jay super excited about a case. And that it gets his imagination going. That’s how cool things end up happening on this channel.

[@Davesretrodungeon]

Yes do a mod, am sure you can get solid side panels for this though might be worth checking out

[@mikemaskarinec3616]

That sounds like it would be a pretty sick build, I'd love to see it happen!

[@TheVibralux]

I'd love to see a casemod done with this case as I've had my eye out for a great air flow case for my next build.

[@ericsimpson336]

DO IT JAY! I love the idea of the solid side panels being all damaged! Everyone can use a little carnage!

[@vijayvinith4154]

The icegiant pro siphon would be awesome with this build like a full air cooled tower but the prosiphon would be performing close to a cuatom water loop

[@TParkcasual]

This Fractal case is a winner, would love to see you throw your jayztwocents flare on this one. Cheers !

[@andydsm]

I'd love to see a Star Citizen themed mod, using this case! Jay please make it happen :) Also, the case has solid panel version.

[@mr.r_theodd1686]

Hell yes! I love all the case mods. The Destiny 2 one is still my favorite to this day. Makes my inner Warlock main smile.

[@SpectreWraith]

@16:44 ...listen! Definitely would love to see a sci-fi/cyberpunk build in this. It kind of has a Rey's speeder from The Force Awakens vibe.

[@annedreikandt7361]

When I first saw this case I immediately thought of a Star Wars build! Only just played Jedi Fallen Order and I'm getting those vibes right away!

[@kidbob44212]

Love how Jay just completely disregards the meshify series.

[@TheJacool23]

i was thinking the exact same as i look at my main rig in a meshify c

[@mattjones4285]

@@TheJacool23 Same here, looking at mine going.. no Meshify?

[@northwiebesick7136]

@@TheJacool23 I love my Meshify C, what do you think about yours overall???

[@jellorelic]

Meshify was nice, but outta the box from Fractal it wasn't great for airflow. The chassis was great, but they skimped on the fans. It desperately needed at least one more fan to make it work.

[@kidbob44212]

@@jellorelic my meshify 2 compact came with 2x140mm front and 1x120mm rear. That thing has excellent airflow with that setup, no need for exhaust fans at the top

[@gladtbx]

Jaz should update his intro to use a Gigabyte PS for the explode visual effect.

[@AB-bu8ti]

LOL

[@bigpapichristo]

No, Gamersnexus should do it 🤣

[@northwiebesick7136]

@@joeschmoe5009 actually, the H1 rizer cable isn't bad, if you're modding, and not using screws, or else just using zip ties or something, to hold graphics card rizer cable in place... Also, it should probably only be in builds that only you would use, guaranteed... And I'm not recommending the H1 case, just saying that the cable itself isn't that bad, or has the potential to not be, cuz it's only that hole that's the problem in the certain circumstances...

[@ChristopherHailey]

@@northwiebesick7136 I have a Gigabyte PSU in my H1 case, is that OK?

[@northwiebesick7136]

@@ChristopherHailey I'm not saying that it would be good in an H1 case, I am just saying that the rizer cable itself isn't bad depending on how it's screwed down, and that a few people might have a use for van H1 rizer cable, where you wouldn't even need screws, like say using glue, however, the gigabyte thing is a different story, because if you use the rider cable without that hole screwed in, it won't break, but a gigabyte PSU can fry at any time...(also I'm talking about using the GPU rizer in such a fashion that you wouldn't use screws ever, no matter how hard someone might try, like, as I mentioned, with glue, in any case that's not an H1, say a custom built bubble iMac PC to desktop conversion, although I have decided to go with a iGPU, so that point is moot

[@ThreeForks]

Just bought this case last week, excited to see what you do to it!

[@KeithSnyder23]

Yes!! I just bought this case and would love to see you mod it!

[@VortexSigma]

This is a really interesting case. I'd definitely like to see a case mod with this!

[@DarinRWagner]

I'd like to see this case in a pure airflow/air-cooled build using nothing but Noctua stuff.

[@sixtus2318]

Solid side panels. Some of his car sounddampening and noctua ! I even would like to hear 5x NF-12x25 vs 4x ap181s/183s.

[@frijin490]

Nidec all the way. Noctua is overpriced and overhyped.

[@Outland9000]

@@sixtus2318 Full Dynamat case interior! 😆

[@DavidSiebert]

I would keep the stock fans at least for the front because I do not think that Noctua makes 180s. You could use them for the bottom and the rear but I would probably stick with the stock but I would use a Noctua cooler like a DH-15. You could use solid panels and sound dampening but glass really isn't that bad since it is very ridged. My guess is as it is pretty quiet at low settings but you would have to see how the heat vs sound works out.

[@sixtus2318]

@@Outland9000 Well, i myself chose a thicc boi: STP Bomb Aero 4,1mm with a scoond layer of Surga Performance Comfort Mat Integra 6.0 mm to boot. You can stiffen the case with it and fully decked out it modulates the sound to the humm of a spaceworthy engine room ;-) At least in my FT02 case

[@NorthernCanadain]

Oh yea, I would love to see a build with this case.

[@munkywrench00]

For your space/engine mod idea - I always wanted a case that had full height intake at the front, and direct venting without passing warmed air on to other components. Difficult and ultimately not much cooling advantage, but it would look great. This case looks to have enough room behind a front mount setup to vent out both side panels. Or even V-mount two radiators up front - shrouded and vented straight out one or both side panels (with some serious frame cutting).

[@TheGameBench]

I'd love to see a mod in this, especially what you described. Sounds really cool. I just bought the RGB version and it'll be the first case I've ever bought where I'm not going to replace the fans. Going to go with air, but might do an open loop when EK's new 360mm (2x180) rad comes out. Also, just a heads up, they do have an optional vertical mount bracket, and you don't have to remove any fans. And I've also seen some testing where adding the back fan is a waste. It's results ranged from doing nothing, to actually hurting temps.

[@narviz]

This case looks great and the internal design is interesting. I'd like to see a closed loop build in it.

[@Shkalim]

If an ITX version of this comes, I'll probably build a new PC

[@WayStedYou]

Don't think they can make it that small. 2 140mm and 1 front 180mm is still like matx sized

[@venzuan]

I have an In Win A1 Plus. Just two 120 mm fans in the bottom. One 120mm on the back and one 120 on the side. I would love to have full front airflow instead of using side vent. On the same case size but it's quite difficult to fit in sff case

[@YOEL_44]

@@WayStedYou Obviously, an ITX case wouldn't fit such an amount of fans, I don't think he expects that either, just take the design elements and distribution, and shrink it to be tighter...

[@Shkalim]

@@YOEL_44 exactly. This case is just perfect for me, but it's also too big, and if possible, it'd be really cool to have

[@ChristopherHailey]

@@YOEL_44 It will be bigger on the outside than on the inside.

[@michaelthompson9798]

The ultimate “Phil” case featuring: - Phil port for radiators - Phil-ters for removing dust build up - 180mm fans to Phil-lup the front panels w/ air flow 🏆👍🎉🥰🥳 brought to you by “I-Phil-It” *explosions 🔥💥💥 🤯

[@mr.velocitystack4133]

I certainly enjoy watching your videos and this is the first time I've heard you mention Gamers Nexus. No harm, no foul; just a interesting tidbit. Two totally different angles of information between the two of you. OCD relates to any build being done, leaving specs of equipment in the rear view, which I like.

[@davidmoffitt981]

I really like the idea of a Star Citizen themed mod - Aegis or Crusader style perhaps? Great review/vid Jay!

[@KarmaWolf63]

Some of my favorite cases are GIANT cases. They give me plenty of room! Yes case mod the crap out of it please!

[@greenmonalisa]

Love my c700m

[@_shadow_1]

SFF is where it's at for me. I don't really want my pc to be an extra piece of furniture in the room or for it to take a desk all to itself.

[@cherrypoptart2001]

Same. But ngl, small cases and builds can be cute

[@First-Name_Last-Name]

I like big cases and ATX boards too. Ample space for parts assembly and cable management, and also easy to clean because there's lesser small gaps. Never going to do SFF, not because I don't like SFF, but due to my Neanderthal level of cable management skills and hand dexterity.

[@KarmaWolf63]

@@First-Name_Last-Name Me too my hands are too big for little bitty junk! lol

[@CoalitionGaming]

How Jay feels at first glance: Fractal: hey cooler master, can I copy your homework? CM: sure but change it a little *Fractal releases this case*

[@everestcomputer]

"I think I found my next case for the perfect case mod!" i think you just found the same case all the tubers are pimpin right now....

[@gonzalovargas5049]

That's just hating. Jay-Z obviously has been searching for the perfect pc for his thoughts and finally found it

[@WayStedYou]

Almost as if it just launched.

[@everestcomputer]

@@WayStedYou kinda my point...

[@nomercypercy2166]

YES please do a case mod with this case. It's been a while since you made a complete build with modding!

[@louisharkna9464]

So I just watched a video from Major Hardware where he 3D printed a shroud to direct cool air at an air-cooled GPU. His results are staggering to say the least, and because you tout liquid cooling on a regular basis and enjoy casemods I figure that this would be right up your alley in a juxtaposed fashion.

[@khaychi]

Jay: "Front panel comes easily off". Phil: **Cuts during both times the front panel was taken off**

[@xpaxpl]

Hey! it says that it comes OFF easily it doesn't say that you can put it back just as easily doesn't it?

[@mjc0961]

10:35. Look with your eyes, not with your mouth/fingers

[@chewyfoks1840]

I would go with the white version of this case for a SC build, this battleship gray one would make an awesome WoWs build.

[@voltadynam7cs705]

Too bad WoWs is in a bit of hot water at the moment.

[@chancewilson1161]

How quite is it? I would love to see the “star ship engine/Star Citizen” build happen. I can totally picture it!

[@Outland9000]

It's a cool idea.

[@jordanhooper1527]

I'm pretty sure they do a solid side panel version of this case Jay!!

[@greggv8]

The craziest fan mod I ever did was installing a high CFM all metal AC fan with a 12 volt relay to turn it on. I cut the case metal so it exactly matched the shape of the fan inlet and used metal tape to smooth the transition. Then I cut out the bottom of the plastic front panel and made some cuts up the sides between the case and front. Behind the panel I put in blocking so that the fan could only draw in air from outside the case. It would take the fan a bit to get up to speed but once running it was pulling air like a vacuum cleaner. Couldn't leave small things around the bottom of it or they'd end up inside the computer. I still have that case from 21 years ago. Massive full tower with 12 drive bays. I got fed up with cramped mid and mini towers.

[@TTMR1986]

I'd love to see a Star Citizen build personally

[@kuzugu671]

How did I guess it was the torrent before I clicked on it lol

[@zatharos6427]

Cause EVERYONE is worshiping this case apparently

[@tobiyokageyama6449]

Silhouette

[@kuzugu671]

@@zatharos6427 lol ikr

[@kuzugu671]

@@tobiyokageyama6449 true I honestly didn't look at the thumbnail I just saw I found this next case for caseload was like its the torrent isn't it

[@internetfamous5491]

Called review cycle

[@elloco99999]

Yes, please mod this case! Preferably with the metal sides, that would be awesome. I'd been hoping you'd do a casemod soon.

[@PCTechHustle]

Mod it! I like the warp engine idea!

[@lillemann3951]

Oh hells to the yes! Id love to see that case being used in a mod of like a scifi engine!

[@i4dat]

Damn straight we wanna see you mod this case! Bring it on Jay. Can’t wait to see what you do.

[@shaberer]

Another idea but certainly _way_ more involved: light strips somehow _in between_ the front panels slits so that you can highlight different patterns in different colors, perhaps even animated. Like some sort of crazy AI calculating stuff or something like that.

[@nxnja_]

just built a pc with this case a few weeks ago at the recommendation of gamers nexus, loving it.

[@Cob_daBear]

I've enjoyed watching your creative process when doing the mods to cases in the past. Would love a new one, too! :)

[@robcaffey2653]

Yes please! This case could lead to so many ideas for you and I would love to see what comes to fruition!!!

[@HollowHeartless]

Yes please! I'm looking at getting one as soon as they're available here, so I'd love some inspiration.

[@ninez5740]

First, YES I’d like to see you build this out. I really like the unboxing/initial review, and own a Meshify C(looking for bigger now). Kinda reminds me of of a O-11/Nine Hundred case. I’ve never done a PSU top mount; I think I’ll never have enough cord length.

[@NickArach]

Just got this case excited to build in it! Would love to see you do a mod for it. The whole warp drive core theme you mentioned sounded awesome, definitely something from Sci-fi would be amazing for this case

[@markdattage1996]

Yes! Please Mod that case!! I like the idea of a futuristic type engine. Like the Warp coils on the USS Enterprise from Star Trek the next generation.

[@RozyShaman]

Going with the starship idea, I'm a fan of the aztec hull painting scheme from Star Trek. I could see that painting scheme working well for this build.

[@MrTommyprochy]

This case mod would be amazing, please go for it, Jay!

[@sxnthwave]

To me it looks like a variant of the Meshify S2, but with some things on the inside changed around. It actually looks really nice, I’m interested to start seeing builds in there. The watercooled builds could be cool, especially if you wanted like a gunmetal theme

[@Maladriel]

Yes, I wanna see it. And also I agree with the fusion engine idea - teal would be great. 👍

[@KurisuSamurai]

The front of this case looks like the rear engines in Starbase! Good idea, go for it!

[@fahadal-asmari6893]

YES !! Mod it!