In this video I replace my oxygen and acetylene regulators. And I take the opportunity to upgrade to multi stage.
Пікірлер: 32
@andrewlyon27074 ай бұрын
I do a lot of work on commercial projects so lots of stairs I recommend upgrading to an oxy weld style kit for weight saving I got the components to change from acetylene to map gas and swapped to the Adam’s gas 2L oxygen then got an aluminium carry case made the whole thing weighs 12kg cost wise think it was about £100 and no more bottle rental
@slbleadworks4 ай бұрын
I really need to look into this. I need to save where I can and bottle rental is quite expensive. Thanks for watching.
@peteb33653 ай бұрын
stuart, dont know if boc still sell them but you can get quick release fittings for the gases, just unclip your bottles of the hoses then. that was back in the 90's though when i worked f or esab
@slbleadworks3 ай бұрын
Oh really I didn’t know this was a thing. I’ll have to look into it. Thank you.
@peteb33653 ай бұрын
hobbyweld make quick release couplings for gases. no more undoing nuts and loosing gas each time. buy extra and can swap between long or short hose setup. personally i like the other comment use small propane and rent free oxygen setup.
@slbleadworks3 ай бұрын
I need to look into these. Thank you.
@Czechbound4 ай бұрын
For us "civilians", it would be great to do a follow up video where you explain your set up : why 2 cylinders; why reverse threads; what does the regulator do; what does "2 stage" mean vs "1 stage"; where do you get the cylinders and what sizing options are there; do you need a licence to buy them; do you "rent" them ( eg just swap them at the supplier for a new one )or are they yours and they get refilled; someone in the comments mentioned "mapp" gas as an option : what other options are there and what are the pros and cons of them vs this set up; for what actions do you weld vs not welding. And maybe another demonstrating how to weld/ tips and what to avoid. You can tell I know nothing 😭 but very curious. All the best !
@slbleadworks4 ай бұрын
Thank you for all your suggestions. That would make a really good video. Thank you for the idea. I forget sometimes that not everyone knows all this stuff all ready. Thanks for watching.
@peteb33653 ай бұрын
think you were having problems because you were using metric adjustable wrenches, try imperial ones 😜
@slbleadworks3 ай бұрын
Ok thank you 🤦🏻♂️😂
@saschakarschner31183 ай бұрын
I thank you for your videos ! I need to get some lead work done on my house which I was born in and it is falling apart. I was wondering if for welding I can use oxygene/propane as well ?
@slbleadworks3 ай бұрын
Hi yes you can. I’ve never used it myself but I’ve seen other lead workers with that setup.
@saschakarschner31183 ай бұрын
@@slbleadworks Thank you very much for your reply ! Working with lead is not a big thing here in Germany, In the UK you seem to do it more. Here they just use it for chimneys usually. Most video instructions come from there. Even the biggest lead sheet manufacturer here has a manual which shows a lot of good technique and it is actually a manual that they translated from UK.
@tomalley7984 ай бұрын
You need quick connect on your hoses lad, It will make life so easy.
@slbleadworks4 ай бұрын
Oh I didn’t know this was even a thing. I’ll have to look into it.
@greatorex19914 ай бұрын
Do you have a link to the regulators please my dial keep getting damaged and those look like they would be well protected. Cheers
Have you seen the Hydro welders which run on ionised water? I have just got one to try out
@slbleadworks4 ай бұрын
No I havn’t. Can you let me know how you get on please.
@rbbuildsandleisure14704 ай бұрын
@@slbleadworks Its brilliant to be fair, costs hardly anything to run, I thought it was an April fools joke when the video came up, but its spot on
@Ashley-wx2fq4 ай бұрын
Hi where did you get your regulators from ?
@slbleadworks4 ай бұрын
I actually got these ones on eBay. Thanks for watching.
@adsaccuracy4 ай бұрын
Got to ask this , but why do you use acetylene instead off mapp gas ?
@slbleadworks4 ай бұрын
It’s what was used when I done my apprenticeship. And I’ve just followed on with it. Thanks for watching.
@Alexxx---1014 ай бұрын
Hi, what's the advantage of getting new regulators? I've not updated mine in probably 7 years or so. Thanks
@Alexxx---1014 ай бұрын
Just watched until the end the advantage is that the flame doesn't fluctuate as much? How much did they cost?
@Alexxx---1014 ай бұрын
My bottles are so fecking heavy carrying then up a ladder on the trolley, have you tried using the small oxyturbo bottles? I've not tried them myself but have been tempted to buy a set in the roof merchant to give it a go.
@slbleadworks4 ай бұрын
You’re supposed to change them quite regularly but I don’t think anyone does. Some come with dates of when they are supposed to be changed. I think personally it’s just a way to get more money from us. But I suppose an advantage would be less likely to have leaks. Also the advantage of upgrading is as you say Just a more consistent flame that doesn’t fluctuate. Thanks for watching.
@Alexxx---1014 ай бұрын
@slbleadworks Yeah you're right I should buy some new ones, I spray them with soapy water now and then to check for any leaks and other than the flame fluctuating a bit they work fine. Quite an expense for not a lot in return. Thanks