Clear instructions. I will try doing this myself 😀
@Adventuresincreation11 ай бұрын
Excellent!
@j6077xxd11 ай бұрын
Wonderful cheers!
@Adventuresincreation11 ай бұрын
Thanks!
@thxdxn5 ай бұрын
The end points and rim points curve, how do you curve it precisely? I’m trying to model a Reflex Sight, the amount the side curves stick out from the width of the sight is 10cm, so each curve would need to be a total of 5cm, but it seems that the radius is calculated based of off the curve, and then it’s centre point which is pulled way back and most of the time out of the sketch, I also can’t do a measurement constraint from the curve to the main box my curves come out from, which means I can’t take that space into consideration for manually measuring and adjusting the curve, I know it’s probably really simple, but I just can’t seem to figure it out, and can’t find any videos specifically on precise curves.
@Adventuresincreation5 ай бұрын
Can you share your sketch so I can better visualize what you are trying to do
@skutahuniai483010 ай бұрын
Newly subscribed and a newb to this world. I started at your "Freecad for Beginners" at #1 and am progressing. I started making a "Bloomin' Onion" mold. It is basically just a 4" diameter cylinder with a 1/2" base, enclosed bottom and numerous vertical slots equally spaced around the perimeter. I got the cylinder formed and one slot cut(using Boolean) but am now stumped. I have tried Datum plane but don't have enough experience to properly execute. Could you do a video explaining or possibly get me going in the right direction? Thanks for the excellent series.
@Adventuresincreation10 ай бұрын
Absolutely, can you show me a sketch of what you want. I will create a video to produce it.
@skutahuniai483010 ай бұрын
Thank you. Just traveling for a couple days. How do I get a sketch to you?
@Adventuresincreation10 ай бұрын
@@skutahuniai4830 you can post it somewhere that I can download it. That's the easiest way.
@skutahuniai483010 ай бұрын
@@Adventuresincreation If I drew a sketch and posted it to Flikr, could you get it there?
@skutahuniai483010 ай бұрын
@@Adventuresincreation I joined your Patreon and left you a message.
@k1u010 ай бұрын
What is the purpose of creating the body inside of a part? I read one other person saying they do this too.
@Adventuresincreation10 ай бұрын
You can create several bodies inside a part. You can create several parts inside a file. You can assemble parts.
@paulradford410011 ай бұрын
That modes has some nasty edges in the middle.. I would probably go with a third curve between the 2 curves to smooth the hard edge. This certainly wouldn't print well.. Happy new year to you...
@Adventuresincreation11 ай бұрын
I agree Paul, definitely would smooth that out if I was going to print it. Was just trying to get the concept over in a simple way.