⚠ iC-7 Fuel Level and Direct Sensor Input Update | TECHNICALLY SPEAKING

#haltech #ic7 #update
The iCC software 1.04.1 has dropped and with it comes a major update to the best 7” display on the market! This video explains all the new features and how to use them. Enjoy:)
Got a question about the iC-7 dash? Leave it in the comments section!
------------------
What’s new in iCC 1.04.1:
• Added: 4 AVI Input Channels directly into dash.
New analog voltage inputs give you the option to add and configure sensors like the much requested Fuel Level sensor! You also now have the option to specify smoothing filters and/or optional pull-ups for each sensor. Global unit settings are available for Temperature, Pressure, and Volume.
• Added: Pre-Configured Sensors
Alongside the four new AVI input channels, are a host of pre-configured sensor calibrations to get you up and running as fast as possible! With support for a variety of our pressure transducers, MAP and temperature sensors, as well as popular GM and Bosch sensors, you will have no trouble getting your new inputs configured.
• Added: MaxxECU Support
MaxxECU users can now connect the iC-7 to their ECUs. The included Help file provides basic configuration instructions.
• Improved: Day/Night Behaviour
You can now configure day/night behaviours using the Parking Light On/Off or Ambient Light threshold. ICC software can also simulate day and night settings for testing your new gauge layout.
-----------------------------------------------------------
Liked this video? Here are more like it:
iC-7 Connectivity Update: • 💬 iC-7 Connectivity Up...
iC-7 Setup Tutorial: • 💬 How to set up your i...
iC-7 Product Overview: • 🔍 iC-7 Display Dash | ...
How CO2 Boost Control Works: • 💬 How CO2 Boost Contro...
---------------------------------------­---------------
Don't miss out on our next video - subscribe to our channel.
---------------------------------------­---------------
For more Haltech goodness check out our:
Website: www.haltech.com
Facebook: / haltechenginemanagement
Instagram: / haltechecu
~-~~-~~~-~~-~
WATCH NEXT: "🏅 Jason Waye's Barra Powered Fox Body | HALTECH HEROES"
• 🏅 Jason Waye's Barra P...
~-~~-~~~-~~-~

[@haltech]

What’s new in iCC 1.04.1: • Added: 4 AVI Input Channels directly into dash. New analog voltage inputs give you the option to add and configure sensors like the much requested Fuel Level sensor! You also now have the option to specify smoothing filters and/or optional pull-ups for each sensor. Global unit settings are available for Temperature, Pressure, and Volume. • Added: Pre-Configured Sensors Alongside the four new AVI input channels, are a host of pre-configured sensor calibrations to get you up and running as fast as possible! With support for a variety of our pressure transducers, MAP and temperature sensors, as well as popular GM and Bosch sensors, you will have no trouble getting your new inputs configured. • Added: MaxxECU Support MaxxECU users can now connect the iC-7 to their ECUs. The included Help file provides basic configuration instructions. • Improved: Day/Night Behaviour You can now configure day/night behaviours using the Parking Light On/Off or Ambient Light threshold. ICC software can also simulate day and night settings for testing your new gauge layout.

[@VeteranTuner]

If I measure with the IC-7 Dash fuel presser like in your video. Can this measured pressure also be read in the Haltech CAN? For example with an ELITE 1500? To show this value with other data log values?

[@haltech]

@@VeteranTuner not at this time.

[@messiahjustin1964]

instaBlaster.

[@nspnutritionsportsperforma6804]

Amazing, having the fuel level was the one thing I wanted before replacing my Cluster with the IC7. Can't wait to put in the IC7!

[@1stMjolnirMarkV]

This is really great to know. Now I can order an IC-7 holder/ Gage cluster replacement and not worry about fuel levels

[@bvward]

Thanks, Matt! Very informative.

[@Andrew260RS]

I really really hope Haltech lets people code their own gauge layouts. Allowing the community to share and swap customer gauges and I also hope that allow customer logos for start up sequences. This would make it the best dash in the world.

[@haltech]

It would also make it super difficult to do tech support for. We're not saying NO outright but that's one of the reasons we haven't done it as yet.

[@Andrew260RS]

@@haltech Get your tech team to make difference gauges layouts and allow people to buy them. I would pay for custom gauges.

[@haltech]

@@Andrew260RS It's worth noting that customising the background and changing the logos IS currently possible. Contact the tech support team for hints.

[@TheSaif78]

Please add in the ability to change the logo in the software. I can already do that outside of the software extracting the map package. But it would be cool if it was an official feature. Also it would be cool to how our own custom layouts just like AEM is allowing us to do with the CD7

[@nspnutritionsportsperforma6804]

So true, why not make it a feature to put your own custom logo, rather than a workaround to get it there. We all know its a Haltech, don't need to advertise it there. I know so many people who said if the layout and logos were customizable they would get one. Why not listen to what people want. Really happy about this update though, I guess they are listening, I hope they see this.

[@TheSaif78]

@@nspnutritionsportsperforma6804 yeah exactly. I might be going with AEM CD7 because that thing is customizable from A to Z.

[@WickedTRX]

Will the 4 inputs be broadcasted on can bus so the ECU knows the values?

[@tommydoimo2749]

It won't the can is a one way channel, you'll have to wire it into ecu for it to display on ecu and dash together.

[@JessopVTS]

@@tommydoimo2749 that's interesting. As the AiM Strada MXG is a two way CAN interface between dash display inputs and ecu

[@exidous6831]

Haltech says they are working on this. I believe they said somewhere at the end of 2021. I just hope all the can data is provided so I can get this info into my MaxxECU.

[@DigitalFl0w]

Keen for some more visual updates in terms of more customisation, background colour and uploading a logo from the firmware instead of manually overwriting files will be sweet.

[@jorgemartola846]

Awesome job guys that's fantastic addition!keep up with the awesome job HALTECH 🤘👊💪

[@mushasho]

MaxxEcu getting love

[@warrickdyson2281]

Will it be possible in future for your GPS speedo module to be plugged into the dash rather than the ecu itself like you’ve done with the avi’s cheers :)

[@sardengineering]

Can I send data from these AVI channels on the IC7 to the Haltech ecu over CAN?

[@haltech]

Not at this stage.

[@sardengineering]

@@haltech Thank you kindly for taking the time to make this reply with confirmation. This steady progress for the product is very respectable, and equally commendable. Thanks for keeping at it 👍🏻

[@incolink]

"at this stage" oh you tease

[@nspnutritionsportsperforma6804]

@@haltech is this something planned to be released soonish? I'm getting my IC7 wired in, and would like the ecu to also read fuel level. If its a feature coming in the future, I will tell my auto electrician to wire it to the IC7 only, not to the ECU. Please let me know :)

[@v8tergt653]

@@nspnutritionsportsperforma6804 it sure took a while 😅

[@BrianCrofoot]

So the fuel level sensor wiring uses resistance? Or do I need to use your signal conditioner to convert resistance into voltage? Edit: I found the wiring diagram and see that it uses only two wires! Awesome!

[@xXPUNiSHER310Xx]

Link?

[@peopleschampgarage7869]

I love the ic7

[@haltech]

me too

[@user-pr2pe4mc1i]

I love very product fro you.❤❤❤❤

[@jordanlab999]

Can a tacho be wired directly to the dash if you're not running a CAN or obd2 ecu? Like a nistune.

[@TinShed]

Can we use this for cruise and traction control as well?

[@razor1505mf]

Last thing I'm waiting for is the option to get a speed signal via GPS. I have an old car with speedometer cable and did an engine and transmission Swap, so at the moment I have no speed or odometer information

[@jarrodpeirce7694]

Haltech have a GPS module for this. It connect into the ECU.

[@designer__030]

Can we configure the resistance points for fuel level? If not, it seems odd to have a few fixed configurations when OEM sending units vary wildly...

[@sheltonswimmer4142]

So you have 4 inputs wires but only 1 signal ground and 1 only 5 volt do you share these for the other 3 inputs?

[@camm6991]

Will there be more fuel sender options added in future eg - a lot of older cars run a 0-30 ohm sender, or will it just be a case of needing to upgrade to an appropriate sender?

[@jackprice6599]

You can set custom values, just need to pick which way the sender goes (0 is empty for example) Like Matt said; it's still best to measure what the sender reads at full and empty to get the most accurate results.

[@davids251]

Could you use AFR sensor? Also can you do it along with the OBD option or it must be separated? Thanks

[@stevenharford3126]

Can you add two fuel level sensors for duel tanks? Thank youn

[@illusiv1ify]

Hi Is there an input/provision possible or in progress to operate an ABS light ? Also there is only an option in the ESP software to turn on check engine light and transmit to dash? No charge or oil pressure output available to the dash ? Clarification would be appreciated thanks

[@boostedinsanityracing7245]

Will the dash connect to a laptop with out it being connected to the car

[@BourneThisWay]

If the IC7 is connected my Haltech ECU, would it receive the same sensor feed back on the display?

[@leewatkins504]

Can you connect the Haltech GPS speedometer module to the dash via AVI?

[@jackprice6599]

Not yet, only 0-5V analog signal.

[@MATTBOMERRACING]

Lap timer please!!!

[@TheTapin1]

Is there a confirmed timeframe on when we'll be able to read the IC-7 AVI's in an Elite/R5 ecu?

[@haltech]

There is not, sorry

[@joshpaine4055]

How do i wire up the fuel level?

[@abdelazizalhammadi8902]

Hi there, im running a haltech platinum pro on my rb25det swapped z31. Is the ic7 plug and play on my ecu ? Or do i need more setup?

[@xXPUNiSHER310Xx]

It's plug and play

[@markoliver7951]

Can you please make the ic7 work for fueltech please

[@jamiewhittaker1814]

Does the IC7 do data logging that can be viewed on the dash

[@haltech]

This is a display dash only. The logging is done on the ECU.

[@poddy20V]

Is it possible to display AFR via link g4+ yet?

[@GregLysien]

Link G4 compatibility was added in the previous update: kzbin.info/www/bejne/mp2tY4OnYt9khM0

[@poddy20V]

@@GregLysien yes I have my ic7 installed but it doesn't display AFR only lambda.