Icebear Champion 125cc Honda ct70 clone and mods

[@713cool7]

Where did you get the 12 inch wheels from??

[@jcb0249]

Not sure if you'd be interested, but the front rack for a ct90/110 fits the ct70 clones pretty well. It's rated for way more weight than it's safe to have riding on the front (I carried a 40 pack of snapple home on mine so it will at least handle 40lb. Good video duder.

[@BIZMOTO]

nice good to know thanks !!

[@damacmachine4u991]

Love watching your videos and the progression of your micro machine addiction spin out of control like me!!👍 Told my girl my bike is growing up as I unboxed the 212 Monster 👹 70 mph on 10 inch tires 😳 Ford Festiva's back in the day ran 12 inch tires. Let the Good Times Roll!

[@BIZMOTO]

Thank you

[@chadcarter9581]

You can do a BBK, take a look at rolling wrench, they even have a fuel injection kit... I like these bikes!! Can’t wait to see you rolling around on it

[@TheRealKalEll]

Yes the 140 fits but its HUGE and u need the wider footpeg bracket and it EATS gas bigtime. Your back rack has a gas tank that bolts on underneath.

[@nuckinfutz1270]

Cajun Maddog’s has a great reputation. If you buy from any of those places in Arlington Tx, you’ll get screwed. 😮

[@edwarddilegge4307]

Wow Mike, I Truly and absolutely love all the mod’s you did on this beauty. Congrats Mike, I would have it set in a deep plexiglass frame and hang that beauty on the wall hahaha. All joking aside in 1974 I had the Honda CT70 In that gorgeous red. Back then that bike was ahead of its time. You literally could not ask for anything that was better for a trail bike. To this day 50 years later the Honda CT70 looks as though it is modern and just designed 2024. It does not look prehistoric (lol) or outdated. In my opinion and how I view it is like it just came off the assembly line. in any event your Mini bike is beautiful MIKE,,,,😊

[@streetglideglide9755]

That’s a bad ass little bike I have been looking at them might have to get one now bad bike bro much fun

[@randylenart9674]

Good review wanted a trail 70 when I was a kid

I put gas nitrox shocks in the rear of my ST70 clone, and is oooother bike now! I recommend that upgrade, there’re some not expensive brands btw. Will be hard to get close to the grom maybe, the grom is fuel injected.. but you can change the CDI too.. a progresive one. The stock CDI in Chinese bikes its close to ok, but sucks 😅

[@BIZMOTO]

nice!

[@tinkerer222]

Hey, great video. Did you have any problems getting it titled and plated in Wisconsin? I live in Illinois, and the DMV is far from customer friendly. The whole MSO thing makes me nervous. I am assuming Maddogs just sends you a MSO. Thanks!

[@BIZMOTO]

did not register yet but I have registered 4 bikes with mso with no problems

[@SymonSaysTV]

OMG this thing is a beauty! I want one.

[@98katman]

Have you tried for top speed yet? Thing looks like a Hoot! Original Honda 70's with 4 speed and stock sprockets maxed in low 40's with a skinny 13 year old!

[@BIZMOTO]

No I won't be able to test it out till spring time once all the salt and snow is off the roads

[@twatson6252]

Yep mine was the same good old days lol.

[@robertedge6902]

Where did you get your wheels and tires.

[@joshbeideman5021]

You can do 140 big bore kit there’s a video on youtube

[@earlyculyer4103]

Nice looking bike man I got the green one coming from Cajun could you please tell me where you purchased the rims I definitely want to go to 12s.

[@98katman]

From my understanding" not personal experience" those that want lots more power tend to upgrade the entire engine to 140cc or larger. When I get mine I will ditch the very quite and restrictive exhaust and rejet/replace the carburetor.

[@pauld3o2]

Old video but worth a shot. How did you dimple the front fender to hit the right angle? Just tighten the bolts up real tight?

[@BIZMOTO]

Yes

[@brianholz9882]

Were you at road America for the indy races?

[@BIZMOTO]

no i wish

[@jamesferron5388]

Good looking bike!

[@Eduardo_Espinoza]

My small bike is also in the middle of the kitchen lol 😊

[@marcmihelich971]

Yo dude I'm your neighbor from the west, Minnesota. How are you liking the bike now that you've had it for a while. Is it actually worth the money, and is it any good on trails?

[@BIZMOTO]

Loving the bike I have it setup for Street right now so I don't do any off-road but in stock form I bet it would be great

[@marcmihelich971]

@@BIZMOTO Thanks, just want two small bikes for me and the lady to mess around when we go camping. I have a 30 ft camper and want something lightweight and easy to load. 😁

[@Revdonlee74]

Did your aluminum rims mount right to the stock hubs? Thanks.

[@BIZMOTO]

yes they did

[@Revdonlee74]

@@BIZMOTO So just order ct70 12" rims? With what size tires? Thank you again for your time.

[@johnholt3752]

I have the same Ice Bear and I am doing something similar. However, after raising up the front fender, I ended up cutting it because it hung so low in front of the motor. The original CT70's fender is a bit stubby in the back. Are you concerned about cooling issues?

[@BIZMOTO]

Nope not at all

[@jellogod]

What did you use to Cut back that plastic rear fender piece ?

[@clawsonbob1]

Can you post source of upgraded wheels & tires? Thanks

[@cliffrogers2206]

Where can I find the wheel combo.

[@joshbeideman5021]

What size wheel and tires?

[@Edward-Norton]

Will the center stand not clear the wheels or is it too short? I'm just wondering why you had to take it off. Also what is the size of your 12" tires?

[@BIZMOTO]

Center stand won't clear the exhaust

[@Edward-Norton]

@@BIZMOTO I found out after talking to David. None of the under mount exhausts will work with the center stand. I do believe the under mount exhaust is a superior design because it keeps the heat away from the rider. I will have to take my center stand off.

[@arlenewolf5260]

@@BIZMOTO Hi I thought you stated there was center stand interference with the larger rear tire. I do not understand the issue with the exhaust. Although yours looks much better than mine did, I just put 400X10 tires on the stock rims, it made it a litttle taller, faster and rode I little better.

[@lavery0365]

Where'd you get those Honda decals?

[@KennyRider137]

Did you order it without the Icebear decals and how difficult was the assembly?

[@BIZMOTO]

just took them off. assembly was easy

[@froilanrosano331]

Why Honda champion CT 125cc and Honda CT 125cc did not distribute to the Philippines?

[@BIZMOTO]

these are ice bear champions a Honda clone

[@jjpjjpjjp1]

Where did you get the new rims and tires ? What model ?

[@98katman]

I just ordered one in red.

[@BIZMOTO]

sweet you will like it

[@98katman]

@@BIZMOTO Did you get a chance to ride yours yet?

[@BIZMOTO]

@@98katman not yet to much snow and salt

[@scooterbob4432]

Can I buy a new 2021 model in California?

[@streetglideglide9755]

We’re did you order the rims from and it should take the bore kit no problem

[@BIZMOTO]

david bullock on facebook

[@streetglideglide9755]

Ok thank you rite on bro like the bike

[@ashleyevans9363]

I just ordered mine. I know its been 3 yrs since you posted this. Anything you would do different or any recommendations? Thanks

[@BIZMOTO]

I would have bought a Honda Grom clone they're a little bit more reliable and easier to work on

[@roygumpel8415]

@@BIZMOTO…. But they’re ugly!

[@KipBurbank1]

Price is great. Ordered one today. I’d like to get the 12” wheel. Where?

[@BIZMOTO]

david bullock on facebook

[@rhumesable]

That’s a clean front fender mod. Can the brackets that attached the fender to the forks be removed easily? I’d love to do this to mine. I also ordered the tail light from Trailbuddy. Great videos!

[@BIZMOTO]

had to cut it off

[@Fjord_Driver]

Police in some areas will pull you over if that plate is not vertical. It wouldn't surprise me if some of them carry plumb bobs to check.

[@mrpaci3542]

What size bolts did you use for the fenders? I know 1/2 inch spacers. Thanks

[@BIZMOTO]

honesty i don't know i just bought the old bolts with me to the hardware store

[@Revdonlee74]

What did they end up doing for you as far as the front brakes? Thanks for your time.

[@BIZMOTO]

I installed braided brake lines

[@Revdonlee74]

@@BIZMOTO Thanks, and they work fine now?

[@BIZMOTO]

@@Revdonlee74 yup

[@Edward-Norton]

Since those are one piece wheels are you running inner tubes or just valve stems?

[@BIZMOTO]

Just Valve stems

[@joshbeideman5021]

How did you get your taillight to mount to the rear like that?

[@joshbeideman5021]

You should have done a how too video

[@1972mercurycougar]

Able to register at DMV, no issues? I'm curious. Herd stories go both ways.

[@BIZMOTO]

yes no problems

[@jtv62161]

where did you get the wheels and are you using your stock hubs? or did the 12 wheels come with them?

[@BIZMOTO]

david bullock on facebook yes stock hubs

[@victordohleman953]

Does anyone know if these are street legal in California?

[@1972mercurycougar]

Hey bro. I'm in Wi. Also. Did your bike come with, a manufacturers state of origin, (MSO) So you can title, and register, in Wisconsin? If I buy one, I want to blast around town, for sure.

[@BIZMOTO]

yes easy to do

[@dodgehemi5045]

is CMS 125 a good clone replica ? Fair price

[@BIZMOTO]

not sure

[@Revdonlee74]

Where did you get your 12 inch wheels from?

[@BIZMOTO]

david bullock on facebook

[@davegoodwin1848]

Can this take the 190cc motor like the Vaders?

[@BIZMOTO]

Yes

[@davegoodwin1848]

@@BIZMOTO wow, I'm surprised. The seat height is about 30" I think and the seat height on a Vader is 42 (41.9)....it might be nice to do the motor swap but terrifying sitting that low at 85mph!

[@BIZMOTO]

@@davegoodwin1848 and the wheelbase is shorter

[@CodyCha]

@@davegoodwin1848 Vader sear height is 30".

[@danbradley8103]

Hello. Can you get me the "David Bullock" where you got the 12" rims. I run that name and nearly a dozen come up. Thanks!

[@BIZMOTO]

Facebook on the zs 190 swap shop

[@danbradley8103]

@@BIZMOTO Great videos brother! These are hard to find, but the guys at Cajun MD say they have one for me, so I will order from them and have it shipped to Az.

[@NshsShdh-jx9ob]

👍👍🥰🥰🥰♥️♥️♥️

[@hook86]

Your fender is dangerously close to the front of the block. Frame flex over a bump could catch you in a turn. Recommend you get longer bolts and some washers and drop the fender a half inch or so. Nice ride!

[@GoldbergPatriot]

Sometimes ya just need longer nuts.

[@perfecto-wtransporterzzpin6380]

Nice what Is the dealer phone number? I would appreciate that. Thk u.

[@BIZMOTO]

1-877-701-0111