A small way to lower the temperature at KS0 about 2-3 degrees! I have looked after opening the Miner times the internal structure and I noticed the following. The motherboard is screwed with the 8 spring screws against the upper part of the housing (heat sink). I noticed that the board has a relatively low contact pressure against the heat sink. I have therefore removed the board and the lower brass spacers filed off about 0.5mm and then ground clean. Cleaned properly afterwards with isopropanyl alcohol, the Asic chips again with new thermal paste and then everything reassembled properly. You have to imagine if the contact pressure is too low, the heat generation of the Asic chips can not be transferred properly to the heat sink, this is now much better and you can feel it clearly in the heat generation of the case! Only as a small suggestion for those who want to open the KS0 also. My temperatures before the modification and after: Temp1: 36 degrees Temp2: 41 degrees Temp1: 32-33 degrees Temp2: 37-38 degrees 50 percent fan speed
@Adam-fs3bo Жыл бұрын
I bought the KS0 and it worked great, I also bought a KS0 auxiliary kit which made it work even better! I recorded it on video, KAS to the moon!
@Financial_Failure Жыл бұрын
Welcome to the IceRiver club! I think they are undercutting Bitmain with the price reduction. Smart business move imho
@RabidMining Жыл бұрын
Could be
@marcsimmler6176 Жыл бұрын
How come no one ever tells us when you're done to buy them you wait to buy them yourselves and make money on them like yeah yeah it's worth it it'd be nice if you said hey you know what I just put an order in for this how about that All your KZbinrs do that and it sucks another thing doesn't have a USB port can I use a fan with a USB and stick it in there
@m4gaminglive841 Жыл бұрын
Awesome, can’t get June batch. 2x order for July batch but scary to buy big one.
@ulrichheinzelmann7967 Жыл бұрын
I've been running three Icerivers KS0 on a server PSU from HP 800 watts (Titanium) for 4 weeks at only 12 volts! This works without any problems! Iceriver only chose 19 - 20 volts, since at 65 watts only approx. 3.3 amperes run through the cable and the hollow plug. At 12 volts this is about 5 amps. I got extra special hollow plugs that have 10 inner spring contacts, which can be loaded up to a maximum of 10 amps. With 3 Iceriver KS0 I have a total power consumption of 188 watts! And this even with the installed fans, which alone consume about 3 watts. So a single KS0 consumes only about 61.6 watts for me. And since the server PSU is only being used at around 25 percent, it's not even using its highest efficiency! I will be installing 3 more KS0s in the near future, so that the server PSU is utilized at around 50 percent. I think I'm well below 60 watts consumption for an Iceriver KS0.
@RabidMining Жыл бұрын
Nice !
@imaginariumpictures Жыл бұрын
Except for some flexibility, this is a deathblow to Osprey. It will be interesting to see if the price stays down, but serves as an example. In the GPU world this is the equivalent of buying a 1660 Super for ETH back in the day. Perhaps the end result is $1-2 a day, but how many of us was dropping $1k on a gpu just to get the same results during ETH days.
@RabidMining Жыл бұрын
Everyone lol but osprey still has options radiant is almost here, kylacoin, think novo is coming, ironfish.
@jgreat4785 Жыл бұрын
@@RabidMining But one has to think that IceRiver is going to make one of these KSO's for RXD....right? Why stop at Kaspa?
@RabidMining Жыл бұрын
@jgreat4785 depends on the algo will see could be possible
@04DetroitLS Жыл бұрын
@rabid mining - from IR The fan at the bottom is blowing to the inside of the machine, and the heatsink above has ventilation holes. The external fan is recommended to use 12038 and 12025 model fans with M3 thread specification. usually there is no need to install external fan, the miner working temperature is too low will also cause hashrate instability. your fan is upside down
@RabidMining Жыл бұрын
Fan is working fine and blows across the fines nicely and is helping for sure based on thermals will swap and check again.
@04DetroitLS Жыл бұрын
@RabidMining try blowing across the fins (fan vertical) Also from IR they are working on a solo mining solution
@RabidMining Жыл бұрын
@04DetroitLS ya last month they mentioned it should be a option with new firmware coming
@RabidMining Жыл бұрын
@04DetroitLS will try a few different ways
@04DetroitLS Жыл бұрын
@CryptoOutlaw according to them, it doesn't necessarily NEED one, and if it runs too cool it won't hash properly
@SterlingSpecter1 Жыл бұрын
Might buy one just to cook my breakfast on in the morning
@doctorbootygood2511 Жыл бұрын
whelp just made my first ASIC purchase
@blackmennewstyle Жыл бұрын
You are making it so hard for me to watch these videos my brother Rabid lol There are so much things i don't like packed here: specialized hardware, hardware wallet lol Well at least everything is very entertaining as always 🔥🚀 Little advice: Do not fight against thermodynamics, hot air rises so place that fan as an exhaust, meaning blowing air to the top of the room ;) So i will ask again until someone gives me a proper answer: What are KASPA utilities? Anyone? Enjoy the rest of your week 💪🏽
@RabidMining Жыл бұрын
True will try it and see what thermals look like it is a nice even blow inside all the fins right now
@Torrezno420 Жыл бұрын
Kaspa utilities: -Send value around the world almost instantly with extremely low fees, in a secure, permissionless and private way. -Smart contracts will allow for the tokenizarion of assets and the creation of dApps in the fastest, most scalable and most secure way worldwide. There are probably more but I'm lazy right now and with those is enough for me.
@blackmennewstyle Жыл бұрын
@@Torrezno420 Basically any other crypto can do that even ETH but thanks for your answer 🙏🏽
@v.cotoiu3568 Жыл бұрын
@@blackmennewstyle not at kas speed
@ThatGuy-sh5ib Жыл бұрын
kaspa is in its infancy stage, right now it doesnt have a big utility but it is the only blockdag and solves the trilemma all other blockchains face. that being said its also the fastest to date and has room to be even faster and more scalable, once it has its legs under it developers will build on the network and build its eco system, once that happens then we will have utility on top of everything else mentioned. Think of kaspa right now as how solana or eth started out, no utility until the eco system was built on top their main networks'. we need to crawl before we run.
@jiggajhood2 ай бұрын
Iceriver is the last company looking out for little home miner
@noel.sk03 Жыл бұрын
I just ordered one on miner bros for 1.4k $ including shipping. Lets go
@theheadiestfisherman Жыл бұрын
Why didn't you buy from iceriver? 899
@tomaszzajac5362 Жыл бұрын
hello, I have a question, is it possible to get the CE Iceriver Ks0 certificate that I have such a problem, I am from Poland and my miner is at the customs agency and they require such a document to pass clearance, maybe something will help
@nilarmstrong Жыл бұрын
Nice i thought it was fake but here you are nice one
@TestatinromaniaRo11 ай бұрын
Iceriver had release official a new firmware for all miners.
@RabidMining11 ай бұрын
Yup
@fullyelectric Жыл бұрын
Wow Rabid awesome 👏 your KS0 came in congratulations 🎈🎉🎊 welcomes to the Iceriver party! also your temps are amazing, what if you flip the fan around pull vs blow which will net the best temps? Remember the bottom fans are trying to push are out the top you blowing down on, see how it looks with the thermal camera I don’t got one.
@RabidMining Жыл бұрын
Am trying it now but went up a degree already
@fullyelectric Жыл бұрын
@@RabidMininginteresting, keep me posted, can also let others on DM know the results so save people from doing it if it does not work out best.
@Frenzy2019 Жыл бұрын
I’m wondering if this can be pointed at unmineable
@RabidMining Жыл бұрын
Good point not sure can try
@alexcoffey7211 Жыл бұрын
How is it possible that nowhere in the KS0 manual is mentioned what the only “button” on the miner does? Thank you Rabid!!!
@RabidMining Жыл бұрын
Lol np
@TeriSneky11 ай бұрын
Now that the network difficulty reaches 50 Ph, what do you think? Is it not really worth getting a KS0 anymore?
@GeneralXxX9XxX Жыл бұрын
thanks @RabidMining keep it up
@dominicgravel6605 Жыл бұрын
Hello! im minig on k1pool with my KS0 on port 3112 and my hashrate is very stable.
@RabidMining Жыл бұрын
Interesting how's the earnings looking might have to try it out
@aozhiminer_Louis Жыл бұрын
I got a great deal on my miner
@ericvalentine1497 Жыл бұрын
Good Content Today! hmmm might have to pick a few up.
@RabidMining Жыл бұрын
Thank you
@ryanvox1 Жыл бұрын
hopefully mine ships soon.
@Pasotintojas1 Жыл бұрын
Just ordered one hope i didn't make no mistakes in that transfer 😂
@TheButcherAtterhagen11 ай бұрын
woke up this morning to see that my KAS0 was offline but it was blinking as it worked. so i unplugged it and after 1min i powered it back on. and try to log in into the admin panel. but it says that the password is wrong but it isnt, its still the factory setting. i try to factory reset it but i cant still get access to the admin panel. what have happed? did i get hacked? how do i fix it?
@Koopjeonline Жыл бұрын
what is the best pool to mine kaspa. I am now on F2pool. ????
@Farlok2088 Жыл бұрын
I pre ordered a KS0 on June 18th. The next day, I received an email with this tidbit "Additionally, we have specially issued discount coupons and are offering a complimentary PSU (Power Supply Unit) to customers who placed orders for KS0 before 5 am EST on June 19th, as a gesture of gratitude for your support and to mitigate the impact of the website price adjustment."
@RabidMining Жыл бұрын
nice
@Farlok2088 Жыл бұрын
@@RabidMining After applying the aforementioned discount coupon code another KS0 with power supply is running me $445.90
@AbdulHaq11901 Жыл бұрын
Whens your delivery date?
@LCW-mn5nh Жыл бұрын
May i know which website you all order
@RabidMining Жыл бұрын
@LCW-mn5nh iceriver.io
@ttlargura11 ай бұрын
I had a power surge and now my KS0 won’t power on. Do you know if the KS0 has a fuse and if it can be fixed ?
@RabidMining11 ай бұрын
Not sure try unplugging for a bit plug back in?
@xKurama96 Жыл бұрын
This might be a bit difficult to answer, but do you think it’s possible to ROI before the KS3? I’m sitting on 42000 Kaspa that I could use for a KS0, but I’m scared it might not be worth it?
@RabidMining Жыл бұрын
That's the tough part for sure if you had it already there is a good chance yes but ordering now guess depends how long it takes to get out the door.
@WiseSilverWolf Жыл бұрын
How much noise does the KS0 make? is it enough to be annoying if you put it in a living room?
@RabidMining Жыл бұрын
Ya can go anywhere next to 0 noise
@tomaszzajac5362 Жыл бұрын
You may have received a CE certificate
@herrguru4264 Жыл бұрын
Quick question about Miners... new and I dont know how it works. Do Miners only work for 1 coin? Or can I use the miner to mine another crypto in the future like Litecoin or Monero in a few months, or a more profitable coin? The reason I`m asking is *everywhere this is advertised as a "KAS Miner".*
@RabidMining Жыл бұрын
These are for kaspa only. ASIC miners are usually dedicated to a single algorithm and can only mine the coins on it.
@herrguru4264 Жыл бұрын
@@RabidMining cool many thanks... and much appreciated for taking the time to respond, Sir!
@IceyCoinMining Жыл бұрын
Keep there customers @ RPM
@user-sk7fo8dx1l Жыл бұрын
Have you tried on node solo without stratum+tcp:// ?
@IceyCoinMining Жыл бұрын
Props!
@zack97811 ай бұрын
hello if i put wrong update.bgz ,now cant long in how to fit it?
@RabidMining11 ай бұрын
Download the latest from iceriver and try it might need to hold the reset button on the miner.
@stuartmarshall7099 Жыл бұрын
Ive got both green and red blinking lights? Anyone know what this means or where I can find out? Thanks
@RabidMining Жыл бұрын
Is it hashing? Both are on when it's mining.
@stuartmarshall7099 Жыл бұрын
@@RabidMining working now but yeah both were flashing at the same time. Did a couple of resets and changed mining pool
@mrtavana Жыл бұрын
why cheaper in belaymining than iceriver website tho? can i trust it?
@RabidMining Жыл бұрын
Yes belay is real not sure when the shipping date is.
@raresoupninja Жыл бұрын
still hitting gpu blocks off my node but im watching tht difficulty flux badly this might be the first asic i go buy as i love kas sad face kso is about max price reach
@PeterWatson Жыл бұрын
think its too late? im ready t buy but now im thinking might be better off putting $999 into kas directly.... hmmm
@RabidMining Жыл бұрын
@PeterWatson ya getting close to that at this point
@yojomojo Жыл бұрын
better hold your kaspa..pump is coming
@chrisomiohue880110 ай бұрын
Is it possible to plug the KS0 on socket when there is no light and it turns up (on) when the light comes in my absence????? Please someone should help me with a reply. I mean does it need manual way to switch it on? Or will it automatically turn on itself when the light comes up?
@pdath Жыл бұрын
What size is the fan mount on the top designed for? 120mm? I have a ks0 on order, and I'd like to bolt the fan into that built-in mount.
@RabidMining Жыл бұрын
120mm yes
@michaelkent1942 Жыл бұрын
I went to set mine up & can't open the batch mining tool so how can I get it started?
@RabidMining Жыл бұрын
Is it in hiveos?
@michaelkent1942 Жыл бұрын
I have a Chromebook & Android phone, I don't have a computer w windows
@REDSignalone Жыл бұрын
How long did you wait after placing the order?
@luxuryvending8847 Жыл бұрын
Which icer river website is legitimate? I see two online.
@RabidMining Жыл бұрын
.io
@angeloluxpt Жыл бұрын
hello, I have an iceriver ks0 but I'm having problems, mine worked fine for 20 hours on F2pool and then it keeps changing the pool and address, whenever I put my pool it changes everything after 2/3 minutes. after a day off I went back to configuring the kaspool but after 10 hours or so it changed the pool settings again, How can I solve this problem??? ? thanks
@RabidMining Жыл бұрын
That's weird never seen that happen not sure what's going on.
@amplifiergamingBTC Жыл бұрын
this is why i plug in asics and leave them and not try to do anything fancy with them
@RabidMining Жыл бұрын
You Been Looking At Kaspa ASICs? KASPA Hardware Wallet: bit.ly/40MMp2v code "RABID" 10% off
@isiprojects8084 Жыл бұрын
RM- do you think some corsair ML140 are enough cfm for a hotter mining room or do you think some smaller Noctua Industrial 120mm would be better?
@RabidMining Жыл бұрын
Not sure as long as there is airflow should be OK
@motleygarage420 Жыл бұрын
epic i wanna try n get one
@Lil_Time_Mining Жыл бұрын
Nice fam 🔥
@Quattrotothemoon Жыл бұрын
how long did you wait to receive your KS0 once the order had been placed? Is shipping safe? Do the terms and conditions mention that they cover lost items and customs clearance? Have you had any surprises? See you soon :)
@RabidMining Жыл бұрын
No surprises yet lol
@Quattrotothemoon Жыл бұрын
@@RabidMining Nice , I'm still hesitating to order a KS0. If shipping is 3 weeks, won't it be too late ^^?
@RabidMining Жыл бұрын
@baptistequattrociocchi4321 will be close
@BlessedNoob Жыл бұрын
@@Quattrotothemoon I just bought one this morning, ship date is July 1 - 5. So we'll see when it arrives
@FrostBite7800 Жыл бұрын
Do you have the webside the good one for order this ks0 thanks rabit
@dougiee6589 Жыл бұрын
ks0 with no psu wtf kinda product is that
@artembespyatyh4000 Жыл бұрын
😂awesome next you must buy kaspa asic k1 next k2 etc. This is crupto business.😂
@RabidMining Жыл бұрын
Ks29 1 EH coming lol
@setab9693 Жыл бұрын
If you bought it, I'll buy it too
@RabidMining Жыл бұрын
This was sent but am debating on a bigger one am running numbers lol
@setab9693 Жыл бұрын
have some 4k dollars after the last reset for justminer x-16, which of course I don't have yet, I wasn't supposed to risk it now I'm sure there is a probability that it will reach Poland@@RabidMining
@Nerd8east Жыл бұрын
Are those noctua fans underneath?
@RabidMining Жыл бұрын
not 100% sure but sure look like it
@ESMINING Жыл бұрын
What pool you use
@RabidMining Жыл бұрын
Kaspa pool but trying solo now
@BlackRoseCrypto Жыл бұрын
How long did it take too come bro
@ThatGuy-sh5ib Жыл бұрын
If your mining kaspa to hodl till next year, consider every week swapping the monero you mine on tradeogre to btc then to kaspa, my 5900x is bringing in 266 kaspa a month after i swap but when kaspa hits a dollar i made 266 a month on my one cpu rig... something to consider if your still mining monero, you have a ton more hashrate then i do, curious how much you can pull in a month after swapping, it would be 100% worth it.
@ThatGuy-sh5ib Жыл бұрын
only way this cpu rig is paying itself off by 2024-2025 and will make profit above the cost of the build in said timeframe.
@Mooria Жыл бұрын
is solomining to own node working yet?
@RabidMining Жыл бұрын
Some people say they are mine isn't working maybe the new batch has new firmware.
@yannaungsoe3702 Жыл бұрын
is it mean that iceriver is not scam any more?
@darrenjohnson9019 Жыл бұрын
What's the daily earnings now that this video is a month old?
@RabidMining Жыл бұрын
Around 12 bucks depending on price
@edmundolozada5494 Жыл бұрын
This miner make noise?
@edmundolozada5494 Жыл бұрын
I wondering if it make noise or not?
@RabidMining Жыл бұрын
@edmundolozada5494 nope
@theheadiestfisherman Жыл бұрын
What kind of barrel connector?
@theheadiestfisherman Жыл бұрын
I just can't find what size the barrel connector is bc my psu isn't shipping with my ks0 haha
@theheadiestfisherman Жыл бұрын
Just a heart?
@anto1.9.8.0 Жыл бұрын
Hi my friend, is this company serious? I intend to invest for the ks2 .... thank you for your answer.
@aozhiminer_Louis Жыл бұрын
my ks2 13300u
@rogerm.4090 Жыл бұрын
I finally received my KS0! I am new to asic's, is it normal for the miner to crash to zero hashrate for a few minutes (in the dashborard) and then go back up to normal? Seems odd to me...
@RabidMining Жыл бұрын
Hmm shouldn't goto 0 once running what's the pool showing same thing?
@rogerm.4090 Жыл бұрын
If it sits at zero long enough the pool will show it. I didn't think the hashrate would fluctuate as much as it is.
@mdmostafiz4079 Жыл бұрын
Where can i find the ip address
@RabidMining Жыл бұрын
In your router or use ipscan
@hossain3833 Жыл бұрын
Ks0 my home page 😢hashrate abnormal please help me
@UPsideDOWNworld321 Жыл бұрын
They drop the price so it's always 1 month to pay off
@raresoupninja Жыл бұрын
nooo lol i soo want one lol dont hurt them
@madechannel6370 Жыл бұрын
Now GPU is Useless like trash ☠️
@dubbyx8490 Жыл бұрын
😂
@shakester2010 Жыл бұрын
Yeah, it's sad but inevitable.
@sophiant6755 Жыл бұрын
😢😢kaspa Profit 24h 21.76$ 😢 -3.28$ lose
@LowBuckMining Жыл бұрын
Sounds like a disgruntled bitmain employee went out and made his own company with those price drops 😅
@RabidMining Жыл бұрын
Lol never know
@afzaalkhitab6449 Жыл бұрын
How long kso will work @rapidminning
@benoittheminerandgamer Жыл бұрын
WTF, 110$ for shipping cost. Don't buy this shit.
@shakester2010 Жыл бұрын
It's from China, probably by DHL Air, how much cheaper could it be?
@goodenoughhoney1667 Жыл бұрын
How do I find the ip address?
@RabidMining Жыл бұрын
Check your router or use a ip program like ip scanner