ICERIVER KS0PRO SPECIAL EDITION - HEATSINKS, FRUITION DESIGNS KIT - READY FOR OC, ORIGINAL MUSIC

ICERIVER KS0PRO SPECIAL COMMEMORATIVE EDITION PREPARATION, IN THIS VIDEO WILL OPEN AND INSTALL HEATSINKS AND FRUITION DESIGN KIT. ORIGINAL MUSIC SOUND WRITEN AND PLAYED BY MY SON.
Discord Channel:
/ discord
THIS VIDEO IS NOT SPONSORED AND THIS IS NOT A FINANCIAL ADVICE TO BUY OR SELL YOUR CRYPTO DO YOUR OWN RESEARCH
- Meter Box discount code 10% off! = ANDREY
www.themeterbo...
DOWNLOAD FREE ICERIVER MONITORING TOOL HERE:
t.me/swift_min...
If interested in purchasing OC contact Tswift
Official Contacts:
Discord: tswiftz
Telegram: @TswiftUSA
FREE DOWNLOAD DEV FEE 0.5% FIRMWARE HERE:
t.me/swift_min...
Thermal Imaging camera
TOPDON TC005 256 x 192 IR High Resolution Dual-Camera Thermal Imaging Camera with 12-Hour Battery Life and 2MP
amzn.to/3vn1UTV
Affiliate Amazon links for thermal glue, heatsinks and thermal paste. Thank you for your support.
Alphacool 17425 GPU RAM Copper Heatsinks 6,5x6,5mm
amzn.to/3TMJsOo
GENNEL G109 10gram Thermal Conductive Glue
amzn.to/47hJ3qB
ARCTIC MX-6 (8 g) - Ultimate Performance Thermal Paste
amzn.to/3NP831u
ARCTIC TP-3: Premium Performance Thermal Pad, 100 x 100 x 1.5 mm
amzn.to/3tHw7fL
JBtek All Black Sleeved PWM Fan Splitter Cable 1 to 2 Converter, 2 Pack
amzn.to/3NZ0LIs
Fancasee 4-Pin PWM Fan Power Supply Cable 1 to 10 Way Splitter Hub 4 Pin Molex Powered PC
amzn.to/3NZ0Mfu
BUYMINERS.CA PWM Fan Splitter Extension Cable - 1 to 5 Computer Fan Splitter Cable Compatible with 3 & 4 Pin PC
amzn.to/3TZ9xKc
skineat 4-Pin PWM Fan Splitter Cable, 11.8" Sleeved Braided Adapter Computer PC Fan Power Extension Cable
amzn.to/3UhHia7
some parts I used to build my KS0-PRO rig:
Disclaimer:
please do your own research before using any of this hardware for voltage converter, it may as well effect or void your KS0/KS0 PRO warranty or damage the product, this video for entertainment purposes only.
Affiliate Amazon links for KS0 power supply, fan, fan temperature speed controller. Thank you for your support.
HP server PSU
amzn.to/3tbpFxl
Power supply board
amzn.to/489amEq
pcie power cables:
amzn.to/3t9q8QB
NOTE:
DO NOT USE THIS ADAPTER ON ABOVE 10amp LOADS
AAOTOKK DC 5.52.5mm to XT60 Adapter Cable Female XT60
amzn.to/3saIShJ
MCIGICM 10 Pair XT60H (XT60 Upgrade)
amzn.to/47HIlEc
OR
Onyehn 4 Pairs 150mm 12AWG Silicon Wire XT60H Plug Male and Female
amzn.to/45gTzy4
2Pcs No Wires Connector XT60 XT-60 Parallel Connector
amzn.to/45i6gsf
HTRC 150A High Precision RC Watt Meter
amzn.to/3QMEfoz
Glutoad 50 Pcs Lever Wire Connectors, 1 to 1 Inline Wire Connector Push-in
amzn.to/3KPKiVz
OTHER ITEMS FOR ICERIVER ASICs:
AC Infinity CLOUDLINE PRO T8, Quiet 8”
amzn.to/3GAbgOu
Power cord for KS3L:
amzn.to/3OCMjWa
Smart Home Energy Monitor with 16 50A Circuit Level Sensors
amzn.to/3qHTGU9
AC Infinity MULTIFAN S3, Quiet 120mm USB Fan
amzn.to/3qyKe5C
2 fans option - PWM Driver Module, DC 12V 24V
48V 2 Channel 4-Wire Fan Temperature
Controller Speed-
amzn.to/43QA7rd
230W Stealth Charger for MSI GS66 GS65 GS76 GS75 WS65 WS66 WS75 WS76, MSI Laptop Power Adapter Supply
amzn.to/3R4yC3w
Wathai 12038 120mm x 38mm PWM Computer PC Case Fan 12V 4pin 5300rpm High Airflow Duall Ball CFM FG DC Brushless Cooling Fan-
amzn.to/3poxQol
disclaimer:
This is not financial advice and I don’t recommend ordering this miner. This video is for entertainment purposes only. Do your own research.
ice river iceriver kso KSO ks0 MONITOR TOOL MONITORING TOOL Commemorative

[@GreaterGoodMining]

Nice, green looks sweet! Mine should arrive tomorrow!

[@DontMindMeMining]

Perfect, good luck and happy mining.

[@DontMindMeMining]

I was able to fit max 10x10x16 mm heatsinks individually, if you are looking for one long heatsink I think you need to have max 6.5mm x 70mm and max 18mm tall I think to avoid touching the other parts

[@AlteredComponent]

Pretty special edition. I have a few of these in route as well

[@DontMindMeMining]

May come today, right

[@AlteredComponent]

@@DontMindMeMining only one is marked shipped. Ordered 3 orders of a single pro at different times. Avoiding those import duties

[@DontMindMeMining]

@@AlteredComponentvery good idea I got hit with use tax after duty customs fees on all iceriver. Hopefully they won’t charge you customs but what I’ve learned is $800 total imports exempt from customs in 30 days period for California. I had luck with individual orders as well but trying to stay under $800 in a month.

[@AlteredComponent]

@DontMindMeMining I'll let u know if I get hit with customs on the 3 separate orders setup

[@OzSkyking152]

Looks fancy and hope it runs well.

[@DontMindMeMining]

Thanks, Will be setting up and overlooking today.

[@lexxel01]

nice cannot wait till i receive mine

[@DontMindMeMining]

It was a nice surprise as it was scheduled for delivery next day.

[@lexxel01]

@@DontMindMeMining I kind of dont want to overclock it so its in mint condition, collectors item reasons as that warranty sticker lol do think the design is good in regards to colour and the kaspa emblem - hope i get the keychain with mine I just started only a month ago with mining kaspa and starting to build ks0 pro collection to overclock - just curious have you ever gotten a mining speed from a pool of 400gh/s - i managed to do it a few times now without stressing the chips or temps in the fluctuating speed within the pools

[@DontMindMeMining]

I did't have any luck going over 350GH on the pool

[@lexxel01]

​@@DontMindMeMining I had the setting on pbfarmer oc tool - at 255Mhz at 39mV if I recall properly - im still new to this and its interesting, is why I watch your videos as really you taught me some things - i have to get the same power supply you have also where did you get your shroud from that you used on this video?

[@lexxel01]

@@DontMindMeMining my current speed in herominers is 390gh/z at settings 255mhz 40mV I dunno if you can duplicate it - all heat is in tolerance levels and the chipsets are without any jutter so completely stable for 6hrs - night time and day time i change the settings due to room temps

[@andyboy-oo9wf]

Nice

[@DontMindMeMining]

Thanks

[@garajulluivalivalisgarage489]

Hi, why 4 small radiators for mosfets instead of a big an more, more efficient? there is enough space....

[@DontMindMeMining]

There are other parts sticking out I think like those resistors wick may prevent one large heatsink unless there is 6.5x50 mm available. Would be nice to see someone’s done it.

[@garajulluivalivalisgarage489]

@@DontMindMeMining at the next cleaning, I will send you pictures. Good luck !

[@user-um9hk4kp9r]

Hello sensei. Why not to put 1 large heatsink on 4 mosfets? I think this is quite real. How do you think?

[@DontMindMeMining]

Not sure about heat transfer from other mosfets but one guy was gonna do it few weeks ago and send me results but still nothing from him m, maybe cannot find correct size there are resistors I think slightly higher then mosfets so have to avoid touching them

[@user-um9hk4kp9r]

@@DontMindMeMining Can you please provide the maximum dimensions of heatsink that fits in ks0? I will try to find big peace of aluminium heatsink for tests. Or just a photo with ruler near mosfets.

[@Stantheman-f3r]

When you ordered what day ??? I've ordered on 13 March and still to be shipped

[@DontMindMeMining]

On Feb 29th, but on ice river it still shows waiting to be shipped, make sure you register with DLH for notifications then you’ll receive delivery notification when it sent.

[@Stantheman-f3r]

@DontMindMeMining good idea 💡

[@DontMindMeMining]

@@Stantheman-f3rgood luck and happy mining

[@Stantheman-f3r]

@DontMindMeMining I've received today a call from dhl to inform me I have a delivery. uhaaa Green is coming

[@AlteredComponent]

Those holes are not like the og ks0 either. The og ks0 had holes across the entire top and not just the middle section.

[@DontMindMeMining]

Yes, you are right. This one exactly the same as regular KS0PRO just looks like more holes on green color lol

[@AlteredComponent]

That garbage thermal pad lol

[@DontMindMeMining]

Yeah, thermal pads are all pretty much single use. Personally I like extreme odyssey a lot better 12.8W/mK

[@AlteredComponent]

Go get some 🐛 🪲 🐞

[@DontMindMeMining]

Are you mining any bugs?

[@AlteredComponent]

@DontMindMeMining stacking a very large bag.

[@DontMindMeMining]

with low hashrate on bugna network its easy now to get more of this coins, will keep on mining on 6 of my ks0 og

[@AlteredComponent]

@@DontMindMeMining 6 og overclocked should get you near 100k a day. Stack a bag and hold my friend

[@DontMindMeMining]

​​⁠yes, it does. Almost 1M coins already. 😊