MOAR FAN - KS0 Pro Overclocking

Lets cool this puppy off
Buy the stuff:
➡️ Buy KS0 Pro here: www.cryptominerbros.com/?wpam...
➡️ 12v Fan: amzn.to/4bxPxoo
➡️ Thermal Grizzly Paste: amzn.to/3w8QzHn
➡️ Thermal Glue: amzn.to/3Sv8dwr
➡️ 5mm Copper Heatsink: amzn.to/489efZl
➡️ 230W PSU: amzn.to/49qbpjU
➡️ 120v Axial Fan: amzn.to/3OCBjsJ
➡️ 12v Fan controller: amzn.to/3OAkG0M
➡️ Blue heat sinks: amzn.to/49qbsMC
➡️ Thermal pads: amzn.to/3SAktLY
➡️ 3d Printer I used to print these (cheap, beginner model) amzn.to/3SwTXDl
➡️ Better, faster 3d printer: amzn.to/49plj5h
Mad Electron Engineering's YT: @madelectronengineering
SerpentX Tech's YT: @SerpentXTech
Tswift KS0 Pro Firmware, Instructions, Iceriver Monitoring Software: t.me/swift_mining/3133
3d Print files I used:
Shroud: www.thingiverse.com/thing:644...
Stand: www.thingiverse.com/thing:625...
If you need a 3d printer, the Ender 3 is cheap and great beginner option.
Buy it here: amzn.to/3SwTXDl
Follow me on X: X.com/TheTechnicals
All muh links: linktr.ee/thetechnicals
Have hardware and ready to start mining? Try HiveOS!:
➡️ hiveon.com?ref=9720549564
Nicehash is good too if you’re mining on your gaming rig (Free!):
➡️ www.nicehash.com/?refby=b46b1...
Ready to graduate to ASIC miners? Got you covered:
➡️ www.cryptominerbros.com/?wpam...
Primochill WetBench:
➡️ amzn.to/47DFhrw
Email me: [e-mail]
“TheTechnicals” is not a financial advisor. The information contained within this media is for informational and entertainment purposes. The Technicals assumes no responsibility for any actions taken by viewers. We encourage viewers to do their own research on products, services, and investments themselves.
#cryptomining #kaspa #ks0pro

[@bobsingle45]

"Captain, we're cavitating, he can hear us", love that movie!

[@AlteredComponent]

Glad to see you back in the game buddy

[@chefsas80]

For a minute there you had me worried. I thought I wasn't going to get a sharpie spreadsheet! Not only did I get one, but there were EMOJIS!!! Great video

[@MrDj599]

thank you myfriend

[@motleygarage420]

Epic video I am doing this to my first kaspa ks0 miner I finally saved up to get one ks0 ultra

[@AlteredComponent]

Looks like some fun testing and whatnot, but i cant see it worth the time and investment. For example, my ks0 pros, i put new heatsinks for like 8 bucks, new thermal paste *mx-4, new thermal pads, like 3 bucks worth, a usb fan blowing in the side for 10 bucks, t swift software, 180w psu for 18 bucks. Running 280ghs on only 125w at the wall.

[@Astro-StarCitizen]

Great Video thanks for the Detailed step by step going through swifts OC's I mapped out the same for my KS0 Pro. Mine runs best at 280g

[@WoTReplaySK]

If you want more air, use the server's fans, for example Nidec.Just fasten the cooler properly so that it doesn't blow them out.

[@RaptorMining]

Great Video Bro!!!👍

[@hdcomputerkeith]

Great idea,

[@SalmanSaleem1985]

ticking time bomb

[@horstmay]

Nice video, Intel and AMD install copper cores in their PC fans to increase thermal conductivity. m/s airflow is not linear

[@AlteredComponent]

toasty

[@jsides1979]

Matt. Your videos are much better than that panda guy! Have you looked into setting it on a piece of marble to absorb some of the heat?

[@TechnicalsMatt]

Don't speak ill of the king my guy. Seriously? Marble?

[@AlteredComponent]

L definitely is the LOW POWER. for example, my 280-L is running 125w total

[@Hansen710]

print a whole kaninet/(boxe that fits a real exaust fan that moves some real air (more silent) that will get some cooling and airflow where needed.... it should more or less be inside a large fan, not bieng sourounded by 20 small oness that does much less work also to remove the hot air so its not reused

[@massaffected8643]

Since you have two shrouds. Try a push / pull configuration like antminers.

[@TechnicalsMatt]

i was waiting for professor flow to enter the chat my issue currently is finding a power supply that can handle 2x2amp antminer fans just the one psu is only rated for 2a itself so i'm overloading it

[@richsainsbury2285]

I just got my KS0 Pro and set it up last night. My first time mining. I have mine with the fans pointing down is that the wrong way?

[@TechnicalsMatt]

face down is stock config i believe

[@purecaneshot]

What 3d printer did you get?

[@TechnicalsMatt]

Kobra 2 Max

[@mikeallensonntag]

What I don't understand with all you guys is your efficiency is way down overclocking. Yes your mining more but your using 200w plus 20-50w in fans. Doesn't make whole lot of sense to me.

[@TechnicalsMatt]

I don't chase efficiency as much as the next guy. With KAS's emissions schedule, and an "imminent" bullrun, I believe in yield right now very much. If that extra power translates into X more coins, that X(gain) i'll enjoy during the appreciation. Hopefully anyway