ICM 1/32 Gloster Gladiator MkI I Build Series I Part Two I

This is part two of my build series of ICM’s Gloster Gladiator MkI. In the video I get most of the actual building finished and get the kit into primer coat.
Tim’s Scale Modelling
/ joesdad1
BAIS
www.facebook.c...
Thanks for watching
#icmgladiator #britishaviationinscale #timsscalemodelling

[@SprueFascinationChannel]

Very nice Tim, enjoyed it.

[@TimsScaleModelling]

Thats great to hear Sprue...

[@bigcharliesmodelgarage296]

Looking good so far

[@TimsScaleModelling]

Cheers Charlie 😎😎

[@Arno_L]

Dry fitting the wings in order to set the struts correctly is the tip I was waiting for! TY

[@TimsScaleModelling]

Glad to be of service Arno 😜

[@allanrichards6448]

Great video and your like me in posing the control surfaces slightly off neutral. I usually build 1/48 and spend hours cutting out the control surfaces to do this. As you say a nice big bird, and you can't beat those!!

[@TimsScaleModelling]

Cheers Allan.. yeah she a great kit really, I’ve since built the MkII for my Battle of Britain GB #bob80

[@the-primered-thumb]

Looking good 😉👍

[@TimsScaleModelling]

Cheers Timbo 👍

[@ChampionScaleModelling]

nice work Tim! Good save with the drill bit and nice sharp masking on the canopy

[@TimsScaleModelling]

Thanks Jas... glad you enjoyed it mate

[@davidi4306]

Looking like a really nice kit. While Extra Thin is a great adhesive, Tamiya White Cap is handy for the big jobs. Great video, Cheers.

[@TimsScaleModelling]

Yep Dave, I definitely use both and the fast drying green cap version, although during these videos I’ve been using Mr Hobby’s fast setting adhesive. Thanks for stopping by 👍

[@idleonlooker1078]

Great video mate! Lots of tips for my forthcoming 1/32 Gladiator build. One piece of advice: use Parafilm" for masking your canopies. It is much, much easier and quicker to use, and easily covers any compound surface that Tamiya tape cannot do. Trust me, once you use Parafilm, you won't use anything else thereafter! 👍

[@TimsScaleModelling]

I did order some awhile ago... but it failed to turn up.. must get some Idle thanks for reminding me 👍👍👍

[@dgvinn]

looking good , it does look like a great kit - i prefer the cutting mat myself .

[@TimsScaleModelling]

Ta Vinnie.... ok point taken.. 👍

[@MottysMilitaryModels]

Great work Tim really well done on the masking of the canopy you made it look so easy. I hate masking with a passion and I'm crap at it, hense why I'll always try to buy the masking set. Ha ha lazy git I am. Anyway looking forward to the painting and weathering progress. Stay safe my mukka

[@TimsScaleModelling]

Same here Motty, I would definitely have used a mask set if one was available mate. Ta mate 👍👍

[@johnf3885]

Great video Tim I'm learning so much from your videos. Cutting mat for me sir.

[@TimsScaleModelling]

Glad to hear John... another one for the mat 👍

[@idleonlooker1078]

+2 for the mat!! 👍

[@toboldlygosmodelworks1973]

Cutting mat, as it gives a proper sense scale to the kit.

[@TimsScaleModelling]

Ok James, thanks for that mate...

[@vicparratt7523]

Hi Tim I see you were using an Infini tape cutting mat. I Purchased one recently ( it wasn't cheap ) but what an investment! I don't know about you but I don't know how I managed without one previously. Best wishes Vic. ps. Have subscribed just love your channel.

[@TimsScaleModelling]

Thank you very much Vic. Yes they are very good indeed, in fact much a lot of Infini stuff is brilliant...

[@ivanwomack]

Great work as always Tim! Im not familiar with the Gladiator but should the aileron deflection be in the opposite direction on each wing?

[@TimsScaleModelling]

Good point Ivan... more work required anyway before I get it into paint. Thanks for the comment mate 👍