Рет қаралды 29,459
As an Amazon Associate I earn from qualifying purchases.
🔥 Icom-7300: amzn.to/2srAkRD
🔥 Jacktite Fiberglass Mast: amzn.to/2GZEMhk
🔥 TekPower: 13.8V Power amzn.to/2SQeF0T
🔥 G5RV Antenna: amzn.to/2FuCmrR
🔥 Yaesu 991 Field Radio: amzn.to/3BfwYEM
🔥 MFJ manual tuner amzn.to/2WarftS
My favorite ham gear:
🔥 Sling Shot 4 tree antenna: amzn.to/2SRCDZT
🔥 Arborist Throw Box: amzn.to/2SSwJr8
🔥 Throw Bag2: amzn.to/2BVfNt1
🔥 Tree Antenna Weight: amzn.to/2Fvj6dS
🔥 Xiegu G90 HF Radio: amzn.to/3O6Ktho
🔥 Portable Speaker: amzn.to/2VNK2v4
🔥 CW Notes, Space Pen: amzn.to/2BQoEvX
Solder Station
🔥 Work Bench found Here: amzn.to/2s5a8Md
🔥 Weller Solder Iron: amzn.to/2WRmvKn
🔥 Printed Circuit Board Holder #1: amzn.to/41kOvpr
🔥 Printed Circuit Board Holder #2: amzn.to/2TC3Akz
My Favorite Camping Gear
🔥 Foldup Camp Table: amzn.to/2SyziSu
🔥 Mr. Buddy Propane Heater: amzn.to/2FJk6Lv
🔥 Columbia Mens Mosquito Shirt: amzn.to/2BQufCC
🔥 Hults Bruk Hatchet Axe: amzn.to/2AzhZqn
I'm sharing the Icom 7300 using the Chameleon MPAS antenna.
This is a 360 VR video using the Icom 7300 and RP40 is a powerful and highly-effective ham radio software program that decodes received CW audio that has been fed to a computer’s sound card. The decoded text is displayed on the computer’s monitor. For transmitting CW, the program encodes keystrokes from the computer’s keyboard. Hams use MRP40 to send and read QRQ (high-speed) CW, to help read weak DX signals, and to improve CW contest scores.
The Icom IC-7300 is Icom's latest SDR HF/50 MHz Transceiver. It offers 100W of output power and receieves from 0.030 to 74.800 MHZ. It operates on SSB, CW, RTTY, AM and FM modes. The Icom IC-7300 features a RF direct sampling system, 15 discrete band-pass filters, a real-time spectrum scope and a large 4.3" color touch screen display. Additional features of the IC-7300 include a built-in automatic antenna tuner, 101 channels, SD memory card slot and 3 CW functions. In the box you will find the IC-7300 transceiver, a HM-219 hand microphone, DC power cable, fuses and plugs along with a warranty card and manual.
Output power: 100W (25W AM)
RX Frequencies: 0.030-74.800
Receiver type: Direct sampling
RF direct sampling system
The IC-7300 employs an RF direct sampling system, where RF signals are directly convert to digital data. Then processed in the FPGA (Field-Programmable Gate Array), making it possible to simplify the circuit construction as well as reduce noise that can mask weak signals.
The new “IP+” improves the 3rd order intercept point (IP3) performance improving the ability to copy a weak signal that is adjacent to either a strong interfering signal. In this process, A/D converter is optimized to reduce or eliminate signal distortion.
RMDR and phase noise characteristics
The IC-7300’s RMDR is about 97dB* (typical value) improving the Phase Noise characteristics by about 15dB (at 1 kHz frequency separation). The superior Phase Noise characteristics reduce noise components for both receive and transmit signals.
* At 1 kHz frequency separation (received frequency: 14.2MHz, MODE: CW, IF BW: 500Hz)
15 discrete band-pass filters
The RF Direct Sampling is protected by an array of bandpass filters. The signal passes through one of the fifteen bandpass filters, where signals outside the passband are rejected. To reduce the insertion loss, the IC-7300 utilizes High Q factor coils.
Large color touch screen
The large 4.3” color TFT touch LCD offers intuitive operation of functions, settings, and various operational visual aids such as the band scope, waterfall function, and audio scope.
Like on the high-end rigs, the waterfall shows a change of signal strength over a period of time and allows you to find weak signals that may not be apparent on the spectrum scope.
CW functions: full break-in, CW reverse, CW auto tuning
SSB, CW, RTTY, AM, FM modes