ICOM IC-703 / IC-706 / IC-706MKIIG LCD Screen Repair

NEW UPDATED VIDEO VERSION
This repair is for a fading screen on the IC-703, IC-706 and IC-706MKIIG models. See my older original video at:
• Video
BUY THE CORRECT LCD FILM:
I sell both the Bright Mode & Dark Mode LCD Films at:
qsl.net/kg5jmv/
ICOM LCD REPAIR SERVICE:
Contact me if you'd like me to do the work for you.
I service the IC-703, IC-706 and IC-706MKIIG models.
LCD TYPES:
Original Factory Bright Mode $90.00
Dark Mode $100.00
Includes parts, labor and shipping costs both ways for U.S. addresses only.
Secured by PayPal and insured by USPS (ship the radio-head only).
Go to: qsl.net/kg5jmv/
NOTE:
If you're having other issues like marks, signs, missing numbers/characters, incomplete numbers/characters or strange flickering numbers/characters. This will not fix those issues. This repair only covers the common classic "fading screen" problem for the IC-706 and IC-706MKIIG models.Ribbon/Flex Cable Ribbon Video:
www.youtube.co....
MAKE SURE NOT TO DAMAGE the Ribbon/Flex Cable inside the front panel when opening it. Here's a link to a video that shows how to disassemble the front panel and remove the flex cable -
• ICOM IC-706 Transceive...

[@klb2005ao]

the best job!!! 73!!!

[@brutonstreettailor4570]

Just followed your procedure as found your tutorial video confidence inspiring enough for me to tackle this repair. I went for the negative lcd look. Regards.

[@KG5JMV]

Excellent!

[@AlbertoEPuig]

Hi Lowell well done. Great job on repairing my IC-706 MKII LCD screen. Thanks very much. 73' 👍

[@enriquecucalonarosemena2803]

good video . where i can get the film? regards

[@KG5JMV]

Thanks. I list the item and repair services on several platforms. But here's my direct website link to the item tandycom.net/vacuum-tube/product/icom-ic-706-lcd-screen-display-replacement-part/

[@ziggytravis1305]

Love your vids

[@larryfields2652]

QUESTION I am running the ic706mk2 and been told there is a Battery in the unit, either in the main body or the external, I have open the main unit and have not found the battery, can you tell me where to look for it

[@KG5JMV]

There isn't a battery in the radios control-head that I'm aware of. I'm only familiar with the control-head. Here's a link to the service manual. After a quick look. I could not find the battery. It might not be a coin type battery? I'm curios now too. It has to have some sort of internal power for the memory. What is this issue? Why do you need to find the battery? Factory reset: With radio turned off - Press the Power button and the "Down" Band button (located in bottom right corner) at the same time. This will re-boot the radio to its original factory settings. www.repeater-builder.com/icom/pdfs/ic-706-svc-man.pdf

[@larryfields2652]

@@KG5JMV Was told this many times by KE0OG that there is one, so I been searching the main body but never found one

[@c.j.deyoungiii2704]

I miss my 706! Wish I didn’t give it up!

[@KG5JMV]

These are excellent HF radios. The original IC-706 was manufactured from 1995 - 1996 before the MKIIG series was produced, which was manufactured from 1999 - 2009. And the IC-703 QRP model was released in 2002. Today the used resale value is $300. - $500. which proves how amazing these units are.

[@markcantrell457]

What adhesive did you use to re-attach the 2 communication strips? I guess it is important to keep the ports clear.

[@KG5JMV]

I don't use adhesive. I use the metal frame to group everything together and snap it back in place. Hope this helps.

[@markcantrell457]

@@KG5JMV Great! It just took 2 tries to get it realigned and working again. That screen looks like brand new!

[@ed-jf3xh]

Looks good. But my display isn't green but orange.

[@KG5JMV]

IC-703 QRP radios have a orange screen. The repair works the same way for both the IC-703 and IC-706 units.

[@bobbylackey7142]

also directions for hardwiring face plate for ic 706- ic 706mk2g. reversible if you ever need to for resale. don't know why you'd part with one. great mobile rigs. . 73.

[@anwarmahmood4648]

Nice job and excellent presentation. By the way where to get the LCD film?

[@KG5JMV]

Thanks. I have some available that are high quality from Japan. Email me. My address can be found on my KZbin About page and on QRZ.

[@the1spyderryder]

I have a 706 that needs this done to it what would a person charge to do it right any idea? I cant see to do it.

[@KG5JMV]

tandycom.net/vacuum-tube/product/icom-ic-706-lcd-screen-reapir-service/

[@scudellarovincenzo1078]

hi, can you tell me what it's called or where you bought the film? Thank you.

[@KG5JMV]

tandycom.net/vacuum-tube/

[@jimlynch9390]

I'd like to take you up on your offer to repair. How do I contact you?

[@KG5JMV]

Email me. My email address is on my KZbin About page and QRZ page. Thanks

[@tonyg5572]

Thanks for sharing. I literally have a boatload of marine electronics displays I'm about to overhaul including an Icom M802. Do you still have polarized material I can obtain from you? 73's. W5LIT

[@KG5JMV]

Yes, contact me via QRZ, email or you can always order here tandycom.net/vacuum-tube/product/icom-ic-706-lcd-screen-reapir-service/

[@HI5MLE]

Greetings, friend, I'm HI5MLE, I want to see if you can help me increase the reception of an IC-706, it is very low, a hug.

[@KG5JMV]

Hello, email me for better service. I would need a description of the problem in more detail.