Get Better V-Carves with Flat Depth (Better CNC Router Projects)

[@IDCWoodcraft]

Sanding brushes → link.idcwoodcraft.com/tbuo1i

[@lylehandeland8020]

Great video Garret. I really enjoy the way you explain things. Vetric software is amazing but can be challenging to learn. You do a nice job walking through the process to make it relatable. Keep them coming please. Thanks, Lyle

[@IDCWoodcraft]

lylehandeland8020, Thank you for your kind words, Lyle! I'm glad you find the explanations helpful. Stay tuned for more videos!

[@bobshomewoodshop7996]

Garrett: I am new to CNC and this video (actually, all your videos) was very helpful. I'm still at the stage where I don't know what I don't know. I ordered that sanding brush set a few days ago and I plan on ordering the "truly complete" set in the next day or two.

[@IDCWoodcraft]

bobshomewoodshop7996, That's great to hear! It sounds like you're on the right track with your CNC journey. The sanding brush set is definitely a good tool to have in your arsenal. Keep up the good work!

[@RAcreativewoodworks]

Thanks Garrett love your videos. I get discouraged with my cnc but you help get me back on path. I am taking Kyle class and it a lot to learn 😂

[@IDCWoodcraft]

RAcreativewoodworks, You're welcome! I'm glad my videos are helping you stay motivated with your CNC work. Kyle's class sounds like a great learning opportunity - keep practicing and you'll improve!

[@richardwilliams5520]

As expected, you did a really nice video lesson job. Learned something here I did not know Aspire had inside of it.

[@IDCWoodcraft]

richardwilliams5520, Thank you! I'm glad you found the video helpful and learned something new about Aspire. Keep experimenting and exploring its features!

[@dougharshbarger1700]

Thanks for the tip on sanding brushes.. got some on the way. Also thanks for the 15% discount

[@IDCWoodcraft]

dougharshbarger1700, You're welcome! I'm glad I could help you out. Enjoy your new sanding brushes!

[@atienne_navarre]

Love your videos - I was wondering if you could explain how to extend a carve if your bed isnt long enough? For instance, if you have a 16" bed but need to do a 25" carve, whats the best way to carve the first part and then slide it up and carve the second half? Assuming your bed is straight, is there a way to use registration marks so that the two pieces are correctly alligned? Thanks in advance if you have the time.

[@IDCWoodcraft]

atienne_navarre, That's a great question! To carve a longer piece than your bed allows, you can carve the first section, then move the workpiece up and reposition it based on registration marks to align it properly for the second carve. Using registration marks on both the workpiece and the wasteboard will help maintain alignment throughout the process. I do not have a video on this quite just yet but it is on my video list for the future! Thanks for reaching out brother.

[@tomasriascosbonilla-n6h]

GRACIAS PROFESOR POR COMPARTIR TUS CONOCIMIENTOS SOY NUEVO Y ESTOY CONSTRUYENDO MI CNC

[@IDCWoodcraft]

user-ww7ky6ie3g, ¡De nada! ¡Es genial que estés construyendo tu propio CNC! ¡Ánimo y sigue adelante!

[@et1871]

Great video excellent detail thank you

[@IDCWoodcraft]

et1871, I'm glad you enjoyed the video! Your support means a lot.

[@wagsman9999]

Thanks. Great explanation.

[@IDCWoodcraft]

wagsman9999, You're very welcome! I'm glad you found it helpful.

[@theyachtshop]

Just a thought. larger angle tool bits will also limit your depth if you want to avoid flat depth settings.

[@nickharvey5377]

That’s great I have a dremmel I need those brushes thanks !

[@IDCWoodcraft]

nickharvey5377, You're welcome! I'm glad I could help. Have fun working on your projects with your Dremel!

[@KimberlyWendt-lc2iv]

ordered the dremmel brushes

[@IDCWoodcraft]

KimberlyWendt-lc2iv, Great choice! Dremel brushes are versatile and great for many projects. Happy woodworking!

[@JoeBravata]

Sure wished I used your checklist. Broke my Big Stiffy hitting my metal holddown clamp😢😢. It was my 2nd carve with the Big Stiffy.

[@IDCWoodcraft]

user-pk1um4oo7c, Oh no, I'm sorry to hear about your mishap with the Big Stiffy! It can be tricky when you're just starting out. So you know, I have a no questions asked 90 day guarantee on all my products. Just follow this link here to the replacement form on the website and fill it out for me. It will help my shipping gals get all your information so they can get you a replacement bit ASAP: idcwoodcraft.com/pages/the-idc-woodcraft-60-day-guarantee Then, you'll just send the broken bit back and I will send you a replacement ASAP! Here's is our address in case you need it: IDC Woodcraft 313 West Main St Madison, Indiana 47250

[@JosephBravata]

@@IDCWoodcraft Garrett, thank you for the reply. I purchased this bit in December 23 but just getting around to using it. I just reorder the bit along with 3 other bits. Breaking the bit was my fault and can't expect you to pay for my mistake.

[@davidhittenberger1651]

Thanks Garrett!

[@IDCWoodcraft]

davidhittenberger1651, You're welcome! Happy to help.

[@ryanjacobson5164]

Garrett, when will you do a video on the new v12 vcarve inlay toolpath?

[@IDCWoodcraft]

ryanjacobson5164, I'm glad you're excited about the new V12 VCarve inlay toolpath! I'll definitely consider doing a video on that in the near future. Stay tuned!

[@karlriley1314]

Your V-Carve Jeep Wrangler plaque isn't on your ETSY site anymore? I was looking for it. I saw your video of Oct 25, 2020 and it said that it was there.

[@IDCWoodcraft]

Unfortunately, I had to pull it down because it was reported to Etsy as a trademark violation.

[@karlriley1314]

@@IDCWoodcraft WHAT. Really. It has no indication with any word of JEEP on it. Funny things. Could you send me the file anyway?

[@DonaldRindal]

Great video's, very informative. I am trying to get the free checklist and it keeps bringing me to a page to sell me a design bundle that I don't need. Am I doing something wrong? Thank you.

[@IDCWoodcraft]

DonaldRindal, Thank you for watching! I'm sorry about the confusion with the checklist download. Try to use this link and enter your email and name when prompted: www.click.idcwoodcraft.com/setup-checklist The list should be sent to your email brother!

[@KennethKraemer-h1g]

Love your videos. I recommend them to everyone! But I’m begging you…please rename your v-bit series to something other than big stiffy!!!!😂😂😂. Maybe challenge your viewers to send some ideas.

[@IDCWoodcraft]

user-eg2ux6bs7m, Thank you so much for your support and recommendations! I appreciate the feedback on the name and will definitely consider it.

[@worrallswoodcrafts4366]

Where can I get that eagle head pattern? I've looked everywhere.

[@IDCWoodcraft]

worrallswoodcrafts4366, I have a file for sale with the eagle head included! Here is a link: www.etsy.com/listing/994524257/3-patriotic-vectors-american-flag-with

[@fritzbatzke4329]

Do you have a link for the check list?

[@IDCWoodcraft]

fritzbatzke4329, no problem brother. Here is a link: bit.ly/3ug35Uj

[@dennisbracci9212]

Can you use a flat tip V bit?

[@IDCWoodcraft]

dennisbracci9212, Yes, you can use a flat tip V bit for certain projects. It's great for carving intricate designs and adding details to your woodwork. Just make sure to adjust your feeds and speeds accordingly for optimal results.

[@billholt5573]

You should fix the spelling of Vetric on the thumbnail. But a good video. Thanks.

[@IDCWoodcraft]

billholt5573, Thank you for pointing that out! I appreciate your feedback and I'm glad you enjoyed the video.

[@eitantal726]

I want to recommend against a sanding brush, and in favor of a nylon wire brush. The wire brush doesn't degrade details, and doesn't degrade by itself. Give it a try!

[@IDCWoodcraft]

eitantal726, Thanks for your input! Nylon wire brushes are a great option for certain projects, depending on the wood type and the level of detail needed. It's always good to have different tools in your arsenal for different tasks.

[@kerrymorley6086]

Why didn’t you show using a clearance tool to achieve the flat depth

[@IDCWoodcraft]

kerrymorley6086, Using a clearance tool to achieve a flat depth is one approach, but in the video, I wanted to focus on a different technique to show viewers another method of achieving the desired result. Feel free to explore using a clearance tool in your own projects to see what works best for you!

[@alexbordo4449]

Why didn't you show everyone that you can use a 1/8 or a 1/4 flat end mill to get rid of those v bit carving lines. I really love your videos but this time you missed a critical step. You placed the 1/8 end mill then removed it. I don't know if you addressed this issue on other videos

[@IDCWoodcraft]

alexbordo4449, Thank you for your feedback! I appreciate your suggestion about using a flat end mill to smooth out v-bit carving lines. I'll make sure to demonstrate this technique in future videos.