An extremely accurate kit and of course museum quality build, I've never seen more creativity in any other resin dioramas. Thanks for sharing .
@samuel-studio Жыл бұрын
Thank you~
@colegensch787 Жыл бұрын
Like how you made a pocket hole so can set the ship inside the resin and take it out when want to so you can light her up that great enginuity on your part Samuel.
@cerisekappes580 Жыл бұрын
A beautiful look into what should have happened. You created the scene perfectly!!! ❤😊❤
@samuel-studio Жыл бұрын
Thank you
@SomeOne-of7nd Жыл бұрын
Its actually stolen from 4THECRAFT
@colegensch787 Жыл бұрын
@@SomeOne-of7nd nah 4thecraft did this one before Samuel ever got to it so I crafting minds think alike in a way Samuel the resin artist and Michael from 4thecraft are very good model makers.
@colegensch787 Жыл бұрын
@@samuel-studio say Samuel how difficult was the assembly of the funnels? Just out of curiosity since those are made of metal I'm guessing that's where you got finger cuts?
@colegensch787 Жыл бұрын
@@samuel-studio or was it at the beginning of the assembly of the ship ?
@colegensch787 Жыл бұрын
Love the light up at night scene that is impressive.
@delorean_time Жыл бұрын
14:27. Yes, I remember this scene from the movie! 😁 The moment when the Carpathia Steamship sailed near the Statue of Liberty. And on board this ship stood Rose and looked at the New York statue. If "Carpathia" sailed near the "Statue of Liberty" at such a close distance, then he would have to plow the entire island on which it is installed.
@svetlanakamneva787 Жыл бұрын
About statue of liberty, you watched kinomiraru?
@michaelschad7555 Жыл бұрын
You should make a 1/400 scale titanic model but it is the wreck, it think it would be amazing with the amount of detail you could put, or you could also make the 1/400 model during the split. I would also love to see that made. Also, love the video.
@candacehoffacker9644 Жыл бұрын
Wow. What a great job❤
@Inottxim Жыл бұрын
This is soo good once again❤❤❤❤ also did no one notice when he was building the bow jack and rose was there lol
@MonkewantsbananaOfficial Жыл бұрын
Can u time it?
@Inottxim Жыл бұрын
2:04 its kinda hard to see it but there you go
@petricapetrache587 Жыл бұрын
😍😘✨️💕
@NotecardLine Жыл бұрын
Ya
@NancyPerez-qb3np6 ай бұрын
What!!!!
@BiancaPerfino2 ай бұрын
I’m a titanic fan and I love your work bro
@mariocinque8588 Жыл бұрын
Se non fosse affondato ora sarebbe un museo "credo". Complimenti come sempre ottimo lavoro.
@samuel-studio Жыл бұрын
thank you
@colegensch78711 ай бұрын
It's amazing how these kitts like this one are mechanically made into sheets. And they give challenging task to transform it from a flat piece into a 3D form like this model was designed with prepainted parts Lazer etched and cut to be folded and bend to transform flat pieces of sheet metal into the famous ship titanic and it has bendable connect tabs that can be bent to properly secure the pieces into a tight fit pretty cool 😎😀.
@rafsanahmed4948 Жыл бұрын
you are very creative😮😮 good job Samuel👍👍💞💗💕
@christianrudolph1138 Жыл бұрын
Looks Great modelfriend 😊
@zWizard-Magolor Жыл бұрын
Beautiful creation
@samuel-studio Жыл бұрын
Thank you~
@zWizard-Magolor Жыл бұрын
@@samuel-studio your welcome
@abramopiyo14684 ай бұрын
You're so smart at making things
@paulogermano82605 ай бұрын
Perfeito ❤
@south_oceanic Жыл бұрын
wow, metal Titanic is so beautiful
@samuel-studio Жыл бұрын
Yes, I think so too
@JosephSmith-dw4mm3 ай бұрын
@@samuel-studio I like the titanic
@Pro052du973 Жыл бұрын
Thats such a beautiful scene
@cosettekonzelman95188 ай бұрын
It feels like a paradox
@laevateintechnology5634 Жыл бұрын
Awesome video keep up the great work Incredible
@samuel-studio Жыл бұрын
Thank you~
@colegensch787 Жыл бұрын
Oh a new one this should be interesting 🤔 we shall see the results in 5 hours.
@bigscwvon5011 Жыл бұрын
최고의 작품입니다.
@MesinTempurMechanicArmada Жыл бұрын
there is great idea😊
@ЕвгенийПавлов-ф5ы Жыл бұрын
Its awesome! Great Job!
@samuel-studio Жыл бұрын
Thank you~
@RandomGuyVids-l9j7 ай бұрын
You should be in the movies
@mariadeliaroblescardenas25785 ай бұрын
Bro it passed 1997😅
@Yes-xv2eb Жыл бұрын
Truly amazing 👍👍👍
@teamtripledent31nextgentls94 Жыл бұрын
The wait for another video for you to post is torture so when I see you post a new video, I waste no time and immediately click on the video to watch
@samuel-studio Жыл бұрын
thank you
@lilyworld1711 Жыл бұрын
It’s beautiful
@samuel-studio Жыл бұрын
Thank you
@KathrynRiffell Жыл бұрын
I love roses safe and the grand staircase
@LukeSimonCarino Жыл бұрын
i love titanic and if it had made it i will love it more
@Ice-cream-vans-of-Northolt Жыл бұрын
Here before its popular
@St4rfilled Жыл бұрын
Can you do Lusitania?
@Battleshipfan Жыл бұрын
i love it a lot
@samuel-studio Жыл бұрын
Thank you
@AngelLpoezcordoba Жыл бұрын
Que quedo increíble ❤
@samuel-studio Жыл бұрын
Thank you~
@colegensch787 Жыл бұрын
A fictional scene of what could have been we will never know forever to guess what history could've had in store for the titanic if she hadn't sunk.
@jamesdennis2004 Жыл бұрын
I agree but it was something we had to go through because the people that got on her. Challenge God and you don't do that that is why I believe she sink.
@colegensch787 Жыл бұрын
@@jamesdennis2004 yes I believe that is true. DO NOT CHALLENGE GOD!!!!!! Or you'll regret for the rest of your life and they found out the hard way they lose their precious ship that they dared claimed unsinkable in front God the actual gull to say that God himself can not sink this ship only to have it backlash in their faces.
@colegensch787 Жыл бұрын
@@jamesdennis2004 some say that titanic's aft expansion joint was tampered with to many times during final stages of fitting out construction which probably would explain why she tore herself in 2 so easily.
@colegensch787 Жыл бұрын
@@jamesdennis2004 well I mean she flexed as her stern rose up in the air but I believe she was tampered with to many times trying to perfect her for her maiden voyage so yes I believe she broke in 2 easily by the aft expansion joint being messed with to much if noticed that the bows forward expansion joint is buckled on the wreck from being bent and contorted to much so besides being broken the titanic is pretty much for the most part bent out of shape and twisted whoever thoughts water could be so cruel to architecture of a ship especially the outward profile.
@jamesdennis2004 Жыл бұрын
@@colegensch787 apart so easily because she could not handle the stress of her whole entire Stern lifting up in the air that high the hull of the ship was not designed to deal with that kind of pressure. And she broke on the back side of the expansion section So for the people that claim that they are not smart because it broke up way behind that expansion joint. And the pictures from the wreck clearly show that. She could not handle that type of pressure on her hull
@colegensch787 Жыл бұрын
See you then Samuel 😉
@labananastronzaa10 ай бұрын
Beautiful video and great job! I love it!! ❤ But where is the pinned comment?😅
@milvitt8 ай бұрын
When ships arrive in New York Liberty Island is at starboard
@Ivan-vv9pf Жыл бұрын
Пожалуйста можно сделать Лузитанию
@chrisserfass86353 ай бұрын
Back in 1912 the Statue Liberty would have been an golden brown ! Because of how copper is.
@CaledonianDrummondProductions Жыл бұрын
Nice job! I have one question, what is the scale of the ship?
@MrMonsterJamFan Жыл бұрын
Did this model require model glue at all? And what carrier is it from? For how much? It's a great build
@samuel-studio Жыл бұрын
99% do not require the use of glue, only 1% require the use of glue. There is a purchase link in the comment I put at the top.
@bjw4859 Жыл бұрын
Was that scale 1:700 ?, that was so detailed, I might have to look into metal models the Jack & Rose figures was a nice touch & no bloody glueing, wow !.
@Alfredo32b6 ай бұрын
Mi artista favorito
@taiwansouthkoreajapan Жыл бұрын
can we get a diorama of saburo sakai's m2a6 zero plane number v-103 flying next to a Dutch civilian c47. or matsumoto castle ?
@modelleisenbahner024 ай бұрын
Can you make the sinking of Lusiana? thank you.
@ScottCawthan.9 ай бұрын
you said something about looking at the pin commet to buy the same one you got, there is not pinned commet :(
@CharlieNugent-fq7di7 ай бұрын
Can you make a pogoney
@NancyPerez-qb3np6 ай бұрын
Can you do titanic but the final plunge pls?
@caysenmetcalf35864 ай бұрын
More like the final plunger
@caysenmetcalf35864 ай бұрын
More like the final plunger 💀
@williamkcfu9 ай бұрын
I’ve seen this model
@lindametzler87405 ай бұрын
Yeah. Maybe he put it the description
@ColleenWilcox-qx2ll9 күн бұрын
If only the Titanic had enough lifeboats for everyone, no one would die
@hisyamyusoff97067 ай бұрын
How do you build this?
@teemusomero6840 Жыл бұрын
✌️❤️
@McElia-s7b10 ай бұрын
theres no pinned comment
@caysenmetcalf35864 ай бұрын
There isn't you sure?
@caysenmetcalf35864 ай бұрын
Try to look harder.
@Thomasthestreamliner Жыл бұрын
Dude I just had a great idea, have you heard of the stupid theory if godzilla sank the titanic? If so then you should try making a model of that
@HoppyHopscotch_OFC842 ай бұрын
Clique no comentário fixado para adquirir o mesmo modelo do vídeo 8:46
@MalenaColmenares4 ай бұрын
Puedes crear el arca de Noé por favor 🙏
@qorymij3710 ай бұрын
Just to let yall know, this is the Mu 3d puzzle titanic model
@Yamato663 Жыл бұрын
Make what if Britannic never sank
@crossfitislife Жыл бұрын
voice reveal when? like 100k subs?
@manolorivera774311 ай бұрын
Hola donde puedo comprar el kit del Titanic que mea gustado mucho ese modelo Gracias
@samuel-studio11 ай бұрын
Hola, puedes buscar en Amazon.com.
@manolorivera774311 ай бұрын
No lo encuentro si me pudieras mandar el enlace te lo agradeceria ya que tu las comprado ya Gracias
@samuel-studio11 ай бұрын
@@manolorivera7743 Lo compré en un sitio web chino.
@manolorivera774311 ай бұрын
@@samuel-studio y no sabes la pagina o el enlace si no es mucha molestia Gracias
@manolorivera774311 ай бұрын
@@samuel-studiohola la buscado en amazon,aliexpres y ebay y no me sale es para regalarsela a mi sobrinillo para los reyes si tienes el enlace o la pagina donde la compraste te lo agradeceria de verdad Muchas Gracias y perdonas las molestias
@Gruselkämmerlein6 ай бұрын
Mal die Modelle Verlinken hätest können damit man sich die mal Ansehen kann zum Bestellen.
@ThexEpicxMechanic10 ай бұрын
Where's the pinned comment? I'd like to buy this.
@samuel-studio10 ай бұрын
You can contact me: Instagram: sresinart2022 Whatsapp:+8618924069773
@АнтоновАН2252 ай бұрын
No. It should be "If Thomas Andrews Didnt Mock God"
@SpringsPlushАй бұрын
@@АнтоновАН225 😐
@nes2000py. Жыл бұрын
Titanic
@Achilles201610 ай бұрын
This is what prob should have happened if they kept it/her straight
@Enzonanoralpeganopau9 ай бұрын
Me portuguese
@NancyPerez-qb3np6 ай бұрын
Then make titanic hit the iceberg
@elburro6750 Жыл бұрын
Can I ask why your wearing a mask? It’s just kind of weird. Great modeling skills though.
@colegensch78711 ай бұрын
I believe he wears a mask cause there's a lot of stuff he works with that are probably toxic and doesn't want to inhale toxic fumes from his crafts such as the epoxy resin which probably has a strong odor that is to toxic to breath
@colegensch78711 ай бұрын
I mean we wouldn't want to get sick from inhaling toxic fumes now would we?