If you put on AFTERMARKET WHEELS…

[@LonestarHawaiian]

From our ‘Ohana to yours, HAPPY THANKSGIVING everyone. Aloha.

[@HockeyRef14]

What size are those hubs??? Can you send a link on where on Amazon you purchased

[@brandovillasenor8049]

Anti sieze will help for future removal,

[@HockeyRef14]

@@brandovillasenor8049 talking to a noob - apologies - mind sharing a link that would fit his wheels / tires size? Thanks for your help!

[@MNKiwi]

Happy Thanksgiving Bra! - Kiwi who used to live in HI / TX and Now Minnesota !! Much Aloha to you and the Fams!! Kia Kaha and go the All BlackS!!! -- Just have got onto your vids after looking to get a Silverado Trail Boss !!- Keep up the good work -Mahalo

[@ashleyvillalpando512]

Are they 78.1 - 106

[@Dougprince72]

On the inside of your hubcentric ring very light coat of anti-sieze, this prevents siezing to hub. Same to rim . Very lite coat.

[@Dumbass_mechanic]

That's a good point, and it's often overlooked. The purpose of the hub is to not only center the wheel, but to bear the weight. Without the spacers the lug nut studs are now bearing all of the weight, which puts the studs in a sheer rather than a stretch. Just driving around using the truck as a car this is probably fine, but if you're loaded up to max payload or pulling a heavy trailer then this becomes a very dangerous situation, the studs could sheer, the wheel comes off and you have a bad time. 👎 also, put some anti sieze on the rings to keep them from siezing to the hub.

[@LonestarHawaiian]

Appreciate the anti seize tip!

[@taylorbokshowan5713]

The hub does not support the weight of the vehicle it does help to centre it but the weight is supported by the friction between wheel and mounting surface.

[@325-k9k]

Not true at all so please stop spreading this lie.. some cars have no hubcentric at all. Bcuz absolutely 0 weight is on the studs or centering rings. think about it, the clamping force between the rotor hub and wheel is what holds it. The cone of the lugnut is seated to the wheel, which applies clamping pressure.. the threaded studs themselfs do not come in contact with the wheel. Thats why trucks got more studs for more clampimg force. It doesnt ride on the centering ring or lug nuts. The lip of the hub is sometimes used to help center the wheel but again sometimes theres no hub-centric system at all referred to as lug centric bcuz all you have to center is is the lugs. You can easily center a wheel missing its hubcentric with just the lugnuts perfectly everytime just make sure the lug nuts go on star pattern and dont bind up. but hub centric is used to make it easy for any soccer mom to slap on a wheel on side of road and get a perfect fit and not have to carefully install the wheel. Just takes a extra few seconds. But they arent load bearing at all not called hub-supported or lug-supported. Its just for centrics

[@dnalor8753]

wrong, the hub doesn't support any weight

[@Dumbass_mechanic]

@dnalor the hub supports all of the weight on that corner of the vehicle. Without the wheel fitting securely to the hub, now the lug nut studs support the weight. These studs aren't designed to support weight in sheer, and they can sheer off, if that happens, you lose a wheel, have an accident, and possibly kill someone.

[@caseyamberg1669]

I have a 2020 trail boss and have been on the fence between a leveling kit or a full suspension lift. Your videos have shown me I can achieve the look I want without having to jack it way up in the air. Thank you for your help

[@LonestarHawaiian]

Glad the videos help! Thanks for watching. Aloha

[@seanrayebizaholonie653]

You should paint the tow hooks to match the blue on the tires. 👍

[@jaredflood7580]

One reason I go to discount tire back when I had my 2012 Silverado I bought aftermarket wheels with the Nitto Terra- Grappler and one of the techs noticed I didn't have that hub bushing or whatever you want to call it, anyway he ordered them for me and installed them all free of charge

[@RaytardedAdventures]

Discount tire has the best customer service, they hooked me up when I was broke and couldn’t afford anything good

[@dwightschrute9508]

I don’t know if you know this or not, but those hub centric rings also work really good when mounting a full size spare under the rear. My 2017 Silverado had XD Hoss 2 wheels on 35x12.5R20 tires. I replaced the factory spare tire with a full size spare. The 35 fit under the truck perfectly with about an inch all around. The only thing I needed was a hub centric ring for the XD Hoss 2 to fill the gap for the end of the spare tire hoist.

[@coreyschell2918]

You just solved my problem!!

[@April8989]

My 2016 F150 has aluminum rims. After 8 months i could not get the wheels off the hubs. I loosened the lug nuts and drive around the block. Solid. I ended up using a 12 lb mall and swung it across the floor to the back side of the tire to bust it loose. Before reassembling, I added a nice coat of antiseize to the hubs and inner race.

[@LPCliftonMusic]

Love seeing your “helpers” getting involved. Some of my fondest memories as a child were “helping” my dad doing various things around the house. Great job dad.

[@noyufly]

Mahalo! I lived in Hawaii (Oahu and Maui) as a kid through 4th grade and relocated to Oklahoma. Miss those manapuas the most! Just bought a silver 2017 Silverado LT 2WD and looking to do a level and put 33s on it. Love these rides!

[@johnnya.quevedo2552]

I was not expecting another video today. Have a happy Thanksgiving brother

[@martingomez4884]

Olights are such good flashlights. They’re sturdy, last a long time and the magnetic backs allow u to place them anywhere when your working on your vehicle.

[@jedd1004]

Also, food for thought, with those wheels if you have any clips from the factory holding on the brake rotors then the wheels will not sit flush like the OEM, those clips have to come off first.

[@SGTCantu]

I had the same issue on my ram 1500 and the shop where I got the lift done did the same thing on all my wheels and fixed that "high speed" vibration on the highway.

[@jepunit12]

I got the 4inch SST on my 3.0 diesel LT Silverado and 35s. I still average an awesome 19 average and 22-24 highway.

[@wrr2112]

Put antiseize between the spacer and the rotor and the spacer will come off easy the next time you want to remove it.

[@LifesGreatNate]

Came here to type this very same thing. Anti-seize will help greatly in the prevention of galvanic corrosion.

[@ernestonevarez1276]

I am grateful this thanksgiving for the two uploads within 3 days

[@Jekyll__]

I believe I have this EXACT problem on my 09 Silverado. I have gotten a terrible bounce/shake from the front end that I never had before after lifting and upgrading wheels/tires. All the shops around me have rebalanced the tires and road tested the truck and just chalked it up to being lifted... I half-heartedly accepted that it was just the rough country kit.. now I'm going to have to buy some of these and see if it fixes my highway shakes. You may have just solved my problem! 😄 Edit: 78.1mm to 108mm ordered 😃

[@LonestarHawaiian]

Hopefully this does the trick!

[@fredthechihuahua]

Did they help?

[@joshraines]

Ugh...if only I had remembered this video last week! I bought new wheels and ran into the same problem as you...slight vibration. I ended up going with plastic rings...but thinking of changing to aluminum as I noticed a small amount of play with the plastic rings and still just a very slight vibration.

[@andrewphilcox3428]

Me running spacers with two studs missing on one hub😂💀

[@Midwesternlifestyle]

5:40 what you’re describing is galvanization. AR-15 armorers think it’s something to be concerned about, but not really on a rifle. With this case, yes. Corrosion is going to be a problem. Just slather it with lithium grease. It’ll never seize on you.

[@VikingHill83]

Just put some anti seize on the steel where the aluminum touches or pentitrox there’s lots of compounds for dissimilar metals out there

[@cameronreed7912]

Came into the same problem but used the plastic ones. No problem what so ever. And I drive my Sierra nation wide 🤘🏻

[@blatantdisregard2312]

Watching these videos have inspired me

[@CaffeineThrottle]

LSH,you can help your power loss by going down to 33x12.50's. This is only half inch bottom x top. I started doing this year's ago cause I got sick of buying ring and pinion sets and also setting them up correctly.Would not do salvage yard swaps on new trucks,nah. This size is easier to spin and next to impossible to spot as you drive by. I've done so many truck mods over the years from frame up to none . Your stock tires were 32's. I have same truck in every way except year 2021. With Pulsar LT and factory GM high performance intake system, truck runs 131mph.Have fun and live.

[@shon9995]

I just have some rims and tires and start on my 2011 Chevrolet Silverado LTZZ71 and the guys didn't put those rings on in my truck vibrate and vibrate vibrate and they just now figured out the problem without the problem I'll be getting my hub centric rings installed next week

[@YouTubeflakeland]

I think it's to make them universal with Toyota, they have a bigger hub. Wheel companies usually send them with the wheels.

[@darksidechevy5720]

I have the same husky toolbox but mine came with a full size locker as well.. it's totally worth having. you should look into seeing if you can add it.

[@DJJOHNNYKNOX]

I lightly lubricants my aluminum hub with Anti-Seize so it doesn’t stick, Works like a charm.

[@drequannhill4190]

Did not having the hub centric ring on do any permanent damage? I did the same thing recently and would like to know if I need to fix something

[@crazymikecrazyfly2727]

Cool looking wheels and thanks for the tips from aftermarket wheels !!! Mahalooo

[@LonestarHawaiian]

🤙🏽🤙🏽

[@mochaleui7814]

Aloha and mahalo Hawaiian awesome video my braddah. Btw happy Thanksgiving and be bless🤙🏽🙏🏽

[@MexicanMarine04]

Sounds like you're ready to re-gear or reprogram for the 35s.

[@brandonelrod04]

I really do not understand why anyone would thumbs down your videos!!

[@LonestarHawaiian]

Can’t please everyone I guess 🤷‍♂️. Thanks for watching!

[@mikehughes8023]

They probably wanted video of the Camaro in action!😎

[@christopheromarrah1785]

Because he doesn't know much and should of known to buy hub rings

[@jasontindall54]

You should install the high country cluster in your trail boss. All digital.

[@timothygregg2223]

Just picked up a 2023 Silverado RST Redline 6.2 in all black. Just can't decide between 4play 4P63, 4P08, 4p83, or Fuel Rebel all in black 22x12 with 35x12.5 Nitto Trail Grappler and a 6" lift.

[@pat14lang]

The hub rings you need is the exact same size as the ones I needed for my setup on my ‘17 Silverado. Less than $20 from Amazon for a set of rings

[@zestymushr00m85]

What do hub rings do? My last set of wheels had hub rings that were squished so I just threw them out and put the wheels on like normal

[@pat14lang]

@@zestymushr00m85 without them the weight of the vehicle is pretty much just sitting on the stud instead of the hub (that can sometimes break studs and/or cause a slight vibration like he mentioned in the video) basically they are made to make sure the wheel sits true and perfectly centered on the hub, so the weight is on the hub and not the studs

[@zestymushr00m85]

@@pat14lang I better pick up a set.. its been two seasons now without them but its good to know thanks alot!

[@pat14lang]

@@zestymushr00m85 they helped with the slight vibration i had. Amazon was running a little behind on my order, so my wheels showed up before the rings did

[@calebfelts962]

Do your tow hooks in the same blue as your wheels

[@tdlawson]

Make sure you recalibrated your speedometer. I have 37" tires and I gained almost 8-10 mph. This will effect your mpg calculation

[@jedd1004]

He likely recalibrated it when he set up the Pulsar tuner, it has that feature.

[@Duramax_LSX_DenaliL5P]

Have you thought about re gearing the truck front and rear since you put the 35s to help with better torque multiplication off the line and passing power? On my 2000 Silverado Z71 originally had 3.73s but was ok not great but ok on 33s.. as soon as I went 35s it felt super slow and like total dog 💩… I re geared front and rear to 4.56 and that helped it on take off, off the line and passing power and towing and MPG… still gets 11-12mpg around town but on a road trip on the highway averages 18mpg. Before with stock 3.73 and 35s it was doing like 7mpg around town and 13mpg at best highway… for a lack of better words, the 4.56 helped “trick” the truck into thinking it’s running stock even though it’s on 35s

[@joeyingle8286]

Just wanted to say I love the channel. Enjoy watching your videos because I'm trying to do a lot of the same to my new to me 19 LTZ 6.2. I enjoy your honest approach and that you do all the work yourself like a lot of us.

[@codydunn242]

You do realize that they have been doing the bigger wheel centers for years, decades. That is why you are supposed to slowly tourqe down and do a cross pattern. And as for the mpg I get 7mpg in my 97 k3500 cclb on 35s.

[@davidarreola2013]

Yo that my boy Bryan!! His truck looks nice with the new wheels

[@LonestarHawaiian]

🤙🏽🤙🏽

[@Techangler65]

Lol I about always use a headlamp getting older can’t see lol. These are great lights

[@cbrunson11]

Man that truck is nice.....But I love the CAMARO!!!!!

[@LonestarHawaiian]

Ditto my friend. 👌🏽

[@CrashLarue]

Small yet great vid. Thanks!

[@HockeyRef14]

What size hub did you buy? Can you share a link please?

[@halohalohikers3571]

Is this why custom offsets and other wheel/tire shops are saying they recommended at least a .75” wheel spacer with all aftermarket rims on the trailboss? Thanks for the demo on the hub centric ring! 🤙🏽

[@raulvaquera9705]

Also be careful not to double stack or use with oem equipmen. There's no telling how many people have come in with hub rings stuck into the spare, barley wobbling into the shop

[@fkh1600]

What about plastic rings does it solve it?

[@MickeyWu7r5]

Yours looks like it has an o-ring groove on the ring itself. Some are press fit or o-ring tension. Never seen loose floaters like that.

[@91Bronco]

Better then my MPG lol. I have a 5.7 Hemi and with 35” I get 13.8 average. I also don’t really go light on the gas pedal lol love hearing the hemi

[@chrismarbrey9678]

I get about the same miles per gallon as you get with a 6.2 but I don't have 35s. Gas prices the way they are right now I'm a little scared to go that big I don't know. I'm pretty sure if I did I'd get like 13.7 or something

[@LonestarHawaiian]

6.2s make better torque low down, if you do a lot of highway driving the difference will be very minimal. The loss is on stop-and-go, getting all that extra weight moving.

[@lorenzocardona4750]

I have a 6.2 with the Readlift SST kit with 35’s and get on average 13.7 mpg around town and a little over 14.4 mpg on the highway.

[@Hypedhitman]

Woah, another video already !? Someone must have some extra time off from work. Appreciate the content Brotha !

[@LonestarHawaiian]

Took a week for vacation! Happy Thanksgiving!

[@Hypedhitman]

Thanks for responding ! Happy Thanksgiving to you and the family.

[@jrc0004]

Wow. All my experience, this is new to me. The three shop(s) have never even mentioned these.

[@SilentWolf68]

How are the wheel hubs holding up after installing the lift kit and aftermarket wheels and Centric rings? Have you had any issues with any of the hub bearings?

[@anthonywalls3281]

Great information . Your new camera man has really grown since I first started watching you in Hawaii keep up the good work. 👍👍👍🙂😎

[@joseramos7476]

Love the stance of your truck.

[@fkh1600]

What about the load is it going to be on the nails or with the rings is going to handle it?

[@Highkeyhawaii808]

Yessaahh Hayn, Aloha and that is one sick rig

[@alexdag8t358]

That was educational I wouldn't have known

[@txdolo3069]

@lonestar Hawaiian; what do you recommend for tires rubbing fenders after installing a lift? Wheel spacers? Cutting out the carpet-like material in the fenders? Mine rub so bad. I had a 3.5” lift. Cheers from Keller, TX

[@5697johns]

Looks like Prosper Texas!

[@TylerGamer765]

That’s absolutely funny I’ve got the same husky box but mine is red….and my granddad gave it to my dad who gave it to me but it’s a craftsman box not identical but pretty much the same size and style 😂 Still has a lot of paw paws wooden handled stuff. Nvr getting rid of it Great video. Just put new wheels on my raptor build. Went from stocks to aftermarket and I’ve got a lil bit of vibration. Gunna have to sort that out now Thx bro!

[@jttribe7683]

When you swapped wheels and tires did you get new tpms sensors?

6 tapered (angle) seat lug nuts assure the rim is as centered as it can get.

[@tweakandshred]

Crazy the fuel economy. I have a 17 with a 6.2L, 2-inch level and 305x55x20s. Diablo tuner and put 3.73 gears in it. I have now been averaging 21.4 mpg. I got 17.8 mpg before the tuner and gear swap. Moral of the story don't over look swapping to 3.73 gears.

[@LonestarHawaiian]

Right on. Did you regear the front end as well?

[@tweakandshred]

@@LonestarHawaiian yep front and rear. Runs way better now and actually gets better mileage. Never would have though lower gears get better mileage but with the big motor it just smoothly runs without any struggles anymore.

[@variableknife4702]

Hello! Love the video and explanation. Great point about the hub centrics. Hoping you could answer if you think the stock 20x9 would work in the same situation - possibly with the 11.5" 35 vs the 12.5? I have an LT non-z71, non-TB. The lift I'm considering is the GM OEM accessory lift, plus a roughly 1.5" leveling setup meant for the z71/tb. I do have some specific reasons for going this way - one is leaning towards OEM and the other is the height without cutting. Don't want to go aftermarket as garages here aren't crew-cab truck size and aftermkt wheels will disappear one evening parked on the street.

[@dennisjordan8300]

Love these videos, just found your channel! #bam (Can't stop watching) I just ordered the RST 1500 Silverado Diesel 3.0 2024 there is a strike going on now but sounds like mine is built will be here in a few weeks.

[@bryangonzalez8942]

Your truck looks fire bro and have a happy Thanksgiving

[@Myksgarage]

Every wheel I bought for my truck came with hub adapters to fit my hub.

[@262ford]

What size spacer are you running? Currently trying to figure out what I want on my truck without overloading the suspension

[@noneyabusiness8394]

I’m thinking about getting the trail boss wheels on my 2008 Silverado since the stock wheels are rotting

[@adamnorwood29]

5.3 are very reliable I have a 2001 Tahoe and it has the 5.3 in it and it has 322,000 miles on it

[@darkside2521]

The new 2020 ones are junk mine with out in 5000 miles 😭

[@ericsalas5106]

Did you add spacers as well ? Just wondering installing new wheels and wondering if I can put my 1/4 spacer and the hubcentric rings on new wheels ?

[@colefalls979]

@LonestarHawaiian please, please help! The wheels you put on with the spacer. Was the wheel bore 106mm or 106.25mm. The method wheels I want to use say 106.25. Im assuming it cannot be exactly 106 otherwise it would not fit right?

[@richardalexander1838]

The wheel tells you its hub size....and you can get your stock and just subtract. Internet is a beast.

[@danielstonebreaker4727]

If I run the same rims on my 21 trail boss do I use the same Hub centric ring 78.1 to 106 or do need to measure the rims when I get them.

[@christopherlongazel8932]

Have you seen any significant rock damage on the rocker panels from having the tires outside of the fenders?

[@Techangler65]

You have the best helper’s in the world lol. That’s great 😃

[@josephmarquardt]

Do you have spacers on any of your trucks?

[@siclsx]

Did you re calibrate the speed o to the 35s? For mpg. So many people don't think about that. They tune it and are like wow I picked up 5mpg with just a tune. Then I tell them is more like 2 to 3 now that your tires are calibrated

[@LonestarHawaiian]

Speedo has been recalibrated (I have a Pulsar LT installed). Truck could definitely use a trans tune though…

[@joediduch5457]

Dont remember seeing a video or if you did it or not but have u upgraded you speedometer or gauge cluster! Its awesome i did mine an got it from WAMS!

[@alexsiguense8489]

What if I have a spacers? I just buy 4 centric rings and when I took the wheel off the truck, I saw the spacer so my cuestión is , should I put the ring on the spacer or on the wheel ?

[@cwilson80]

Perfect timing! Just received my Ready Lift leveling kit this week and am waiting for my new aftermarket wheels and tires for my 2020 Trail Boss. I looked up the specs for my new wheels and ordered the hub centric rings from amazon. Love your channel…learned a ton! Aloha from Montana!

[@stayshredded3293]

Hey! Im going to order these rims for my trailboss but dont have the caliper to take the mesuerments for what rings to get. What are the ones you bought for these rims?

[@limitlessstunts]

Do you have a link for the hub rings? I am ordering the same wheels and I cant find the specific ones that you have. Thanks!

[@gunsnsails]

This is exactly how I envision my future channel to be. Learn from my mistakes! Awesome vid!

[@ern153]

Couldn’t you put anti size on it to keep it from seizing?

[@LonestarHawaiian]

Yessir

[@Boobtube.]

@@LonestarHawaiian did you?

[@manuelsantistevan6527]

Is it possible to send a link for ur centric hub spacers gonna but put the same rims on my truck ?

[@ldr9426]

@LONESTAR HAWWAIIAN I bought the trail boss custom and I’m wondering if you know if the headlights that you have for your LT would fit with the grill the custom has I know they fit on the truck I have but I wanna keep my grill

[@LSMONTE454]

Did the spacers take the vibration away ?

[@alexsiguense8489]

What if I have a spacers? I just buy 4 centric rings and when I took the wheel off the truck, I saw the spacer so my cuestión is , should I put the ring on the spacer or on the wheel

[@mdg4902]

I have a 2012 siverado 1500 with factory wheels. I don't want to change the wheels out, just the center caps. Any suggestions please?

[@datsmoothbrotha]

I've been running into this issue with my obs....On another note, I need to figure out how to get my garge floors like yours🤔🤔

[@gearsspinning9762]

Happy Thanksgiving 🤙🤙 Can't wait for the 100,ooo subscribers

[@LonestarHawaiian]

🤙🏽🤙🏽

[@torresbpxlife]

What tipe of cordless inpact are you using?

[@rsw9480]

Where did you purchase your Hub centric Rings .Looking for a set For my GMC Canyon

[@redrado0841]

I’d recommend “plastic” rings. You would be f*cked if you were on the side of the highway trying to install a factory spare tire and couldn’t get the hub ring off. No access to a torch there. They seize on extremely commonly especially if you live along the coast where the air is humid and/or salty or if you live where it snows and they salt the roads. I’ve seen plenty of cases where the wheel, hub ring and hub of your vehicle get seized together and you’ve gotta give it a hell of a knock with a 20+ lb deadblow hammer. Which may make it impossible to remove the wheel at all on the side of the highway in attempt to install your spare. The plastic rings we use on all of our aftermarket applications at work are made from a very durable and extremely heat resistant material. These rings DO NOT carry any load whatsoever so there’s absolutely nothing to worry about there, the aluminum rings are far overkill in that department. But hey if you typically carry some tools in your car, have a decent amount of strength, and get your tires rotated every 6-8,000 miles AND MAKE SURE YOUR WHEEL AND VEHICLE HUB IS WIRE BRUSH BUFFED OF RUST BUILDUP EVERY SINGLE TIME, then you’ll probably do just fine with the aluminum ones. No hate whatsoever to this awesome guy, just want to share some information to the public since I work in the field. Everyone have a great thanksgiving 🥂 🦃

[@mrprfct7069]

Most gearheads like all kinds of brands as long as it’s fast. I have a preference for oem manufacturer but I don’t hate on others. You like GM but hate Ford. Me, I am happy if you are happy and enjoy modifying vehicles like me.

[@projectkarr]

Not sure if you added this into your mileage calculation, but your tires are now larger meaning you cover more distance with each rotation. You can add the percentage difference to your mileage.

[@LonestarHawaiian]

Tries/odometer are recalibrated to the 35s