IS OUR CASE 895 REALLY SOLD AND WHAT HAS REPLACED IT???

[@PhluterGoode]

I’m another person who’s glad that the Case isn’t leaving the yard. A few bits and pieces that you’ve outlined will make her a very handy machine. Thanks for all the great videos Adrian, keep them coming.

[@gerry6420]

You were right to keep it. It’ll go up in value over time. Especially with low hours

[@abbiemoran3053]

Adrian,so glad you didn't sell the case,lot of men have sold tractors for nice shiny one's and have regretted it,when u have a good tractor you mind it,bought a Massey 4235 with loader last year and love it,but still held on to my case 1394 that I have for years,no money would buy it.great video as usual.

[@anthony342]

we sold a 4wd drive 590 and wished we hadn't

[@ritchieblackmore5204]

I glad you are keeping the CASE 895 great bit of kit, I used to drive a CASE 985xl with loader never had any problems, but only put loader on when I needed it, you made a good choice, still loving your videos

[@dodge7679]

Another great vlog A.....love how well you look after everything and keep everywhere so neat and tidy

[@davidcooke8002]

Great to see a fella that appreciates the classics, and is adding value to his machines instead of them depreciating and being broken up.

[@Kt-ro2fm]

The headlights/dims are on the indicator switch along with the horn 👍

[@stephenmorrin3959]

Indicator stalk back and forth to switch between dips and fulls if I remember correctly

[@nickyconaty2093]

Might be no harm to look into a quicke soft drive for the loader, easier on loader and tractor, takes alot of the sudden bangs and hops out while working/driving

[@seancronin5916]

You should tell where you got the LEDs as someone else could get caught out..

[@spideybrent]

Hello from Yorkton, Saskatchewan, Canada. Thanks for sharing your great video’s please keep them coming.

[@gofish1468]

Brilliant decision to hold on to her Adrian.....she owes ya nothing and is a mighty wee yolk in fairness!! Looking forward to the total transformation and best wishes as always!! Might pop in tomorrow night for a wee natter !!!!

[@davidm03955]

a wise decision Adrian..there a bombproof little tractor and with that low hours you'd be mad to sell it..we have always had quicke loaders..we currently have a newer q series loader on our tractor..but before that we had a q980 on our previous loader tractor..it was over 20 years old and due to the fact we religiously greased it once a week it hadn't a crack or weld on it after all its years of work..i have no doubt you will maintain that loader the same as we did ours, and you will get many years of top service from it..good luck to you sir👍

[@michaelsweeney12]

Id recommend piping the loader up under the seat so your loader is live all the time and you still have all your spools free at the back

[@IFarmWeFarm]

Yes that’s the way we have it planned, easily done

[@williammcbride5731]

We have 885 XL super full beam and dip is on indicator. Pull it back and forward like a car. Tidy machinery good to see tidy well run yard great videos 👍👍

[@WilliamStevens007]

We used to run a Quickie 3200 us on a 885xl, big loader for the tractor though. Nice to see she is staying though.

[@MrShanbla]

Looking forward to seeing it in action!! Good choice in the end I think, no point spending money you don't need to spend especially with the way farming is these times!!

[@IFarmWeFarm]

Very true

[@philiptyndall4968]

Have a look at getting a weight for the back end or wheel weights Adrian. It really saves the front axle on them and keeps the stability. Best of luck with it 👍

[@IFarmWeFarm]

Yes we will be putting a rear weight on for sure, thanks lad

[@philiptyndall4968]

@@IFarmWeFarm we had a 1998 case 4240 with a loader that we put 20k hours on. The king pins broke on the front axle on the end. Weight on the back on loader tractor since

[@yant8777]

I think you made the right move Adrian.The Case is in good condition and fine for your job.

[@scrapjockey]

Had 895XL for 15 years,10000 hrs with Tanco loader.You will need a weight on the back.Think about putting spot lights near where the indicators are,makes a massive difference.Kep up the good work.

[@georgerome]

Cracking video as always Adrian. Finally figured out all this KZbin Malarky ha . Great to see you've the 895 Case I'm sure she will do you a good turn for a few more years yet . Also means the money you've saved can put towards something else

[@MrBfg1978]

Nice to see the 895 staying.I have a 885 and for the high beam you pull on indicator stalk for high and low beam.

[@jonnymcnamara7019]

Yea our 695 is the same

[@michaelstaunton1632]

Great video, glad yer keeping the Case Tractor now. Best of luck with her now 👍👍

[@franklintucker5712]

I wouldn't sell the back loader.if the case brakes down in the winter always gos wrong on a Sunday morning bean there done that. It doesn't ow u any money. Keep up the good vids.

[@danielmccallister7719]

But it will have a different head stock

[@theghostofcornpop4175]

Fair play these things happen for a reason and the loader on the case was ment to be , can't wait to see the finished job ! Im wondering what gerry6420 has bought , mabye a hedge cutter as well 🤔🤔

[@anthony342]

nice to see his face in the vids now , lovely fella

[@chucklesx]

@IFarm Wefarm well may it wear, should be a tidy outfit. If you want to have the loader a bit faster without using high engine revs there is a high speed drive gear kit available from case for the hydraulic pump on the 85/95 series tractors. Is the mast you have the shear grab on heavy enough to put a set of pallet forks on? If so it might handy to keep it for moving stuff around the yard.

[@shanemannion4077]

When the loader is on and working tilt the bucket out all of the way and check for Rot around the pins

[@barry885xl8]

Glad you didn't sell it, a good stockman's tractor.

[@lfcfan2490]

You spoiled it on me

[@jmcagri4922]

You might need to invest in heavy centre rims or a weight block for the back to balance her out once you have the loader on. We put heavy centers on our fiat 82 94 an made some job of her

[@jdmunro9831]

Good your keeping the 895 I have mine for 17 years and delighted with it . The full beam is on the left hand stalk it’s propably the relay that’s gone had the same problem . When your diesel tank is off make sure you clean the gauze filter on the pipe outlet ! When you run the pipes over the diesel tank put the plastic flexi pipe guards on them help keep them good . Great video and a very tidy 895xl 😎

[@eamonmcgrath6798]

Very clean 895 and with the loader on,it will be handy for around the farm 👍

[@user-pe4sx7ey3m]

Love to know which is better topper or disc mower for grass , value your advise

[@aaronringland9671]

I have my loader joy stick mounted to the bolts under the spool valve levers. It then comes up in front of the arm rest. Means you have no reaching. Also mine is connected under the seat to the main hydraulics. Good tractor for the loader

[@IFarmWeFarm]

Yes that what I meant about removing the rear wheel as then we can pumb it in under the seat so it’s always live fed. I like the idea of mounting it at the spool valve levers, can you send me a pic of that? Thanks

[@aaronringland9671]

@@IFarmWeFarm ill get 1 tomorrow. You have to remove a wee s shape pipe and join her up. Good luck with it anyway. Also wee had to jack front of cab up to get brackets in. But mine is a tanco loader so could be diff

[@paulsweeney8938]

You should get bale handler's for the front loader

[@archiearmour2828]

If you find case is light on backend you could half fill back tyres with water so you don't need a weight.

[@Matthew-zj1jx]

The end when you said u got a whole days work done with out the loader really made me laugh 😂

[@mrnate4280]

Very smart decision in my mind. Great luck finding that loader. Every bolt....nice!

[@paddykelly656]

Great video. Good decision to keep the case. always enjoy seeing clips of it.

[@jamieshields9521]

Glad you are keeping the CaseIH, nice loader, can’t wait to see finish paint job on loader n other farm equipment👍just wondering if bushing need replacing on loader n front tractor suspension?

[@pmurphs07]

Quicke r great loaders Adrian well ware 👍👍👍👍 is d full lights not on d indicator switch??? On steering colum??? Keep up d good videos Adrian

[@lesrose800]

Great video look forward to seeing the loader going on, had the same loader , it was a great tall , Cher’s. Les

[@thomasosullivan7532]

Tidy tractor loader around yard, you'll get some use from it, jf good mower have one myself! Look forward to video's of all your projects.

[@nickhill3362]

I think you did the right thing and as you said it owes you nothing so all the work you get out of her now is a bonus 👍

[@liamhennessy31]

Great video, really look forward to them each Sunday. I’d imagine Farmer P influenced this decision. I follow him as well. A great guy to get advice from. Keep up the good work 👍

[@IFarmWeFarm]

Thanks lad, Farmer P is a gentleman

[@loganjennings9230]

Well Adrian, I was just wondering if you could give a rough price on how much you payed for just your slurry tank alone. Dosnt have to be exact price just a rough figure. We are planning on putting up a shed a bit like your own and would love an idea on what sort of money there is involved

[@johnlong3214]

It seems I found you at a very interesting time, 👍 and 🔔

[@MrMjdi]

Looking forward to seeing the Case and Quicke matched up. That tractor has very little done so she should serve you well for a few more years yet. Very tidy outfit for around the yard for winter feeding etc. How do you find the JF mower? We have an SB2000 model from new since 2006 and its faultless.

[@IFarmWeFarm]

Great mower, we’re very happy with it. There’ll be a video on it soon

[@jerryodriscoll3691]

Good luck with her will you be getting a concrete weight for the back as shed be light enough with a bale on the front. I'd say keep the silage grab for the rear, if you had any burst hose or something to stop you feeding the cattle you will have some backup rather than a pike and wheelbarrow 😂, Great video and congrats on 11k subs!

[@IFarmWeFarm]

Thanks lad, Yes definitely will be getting a rear weight very soon

[@jerryodriscoll3691]

Soft ride for the loader would make a massive difference with the lifespan of the tractor, really saves the front axle

[@IFarmWeFarm]

If shes not blue she'll not do definitely going to look into that 👍

[@johnsheahan7914]

Great video as always you have a good tidy farm

[@MrSherry2011]

Nice video. They are a great loader. Are you still going to make a video on topping??

[@IFarmWeFarm]

Definitely as soon as there’s something to top 🙏☔️

[@MrSherry2011]

IFarm WeFarm Goodman Cheers.

[@pauldunnelandscaping9781]

Love the videos, I have my one Chanel Paul Dunne landscaping. Can I ask what came you use. Quality and stability are top notch.

[@IFarmWeFarm]

Hero 9 and Canon G7X Mark 2

[@wildcat22]

we have the same shear grab, blades need replacing though.

[@dazzercullen948]

Good to see the case stay shes a fine lady

[@ggkid409]

U finally got a front loader well done

[@Eoin-zn5li]

Good video case and loader are in good condition, what hedgecutter is that i own a pa93 mcconnel i think, good machine nice bit done with it now

[@IFarmWeFarm]

McConnell PA 93 Hi Power, there the pick of the older machines

[@Eoin-zn5li]

@@IFarmWeFarm ya same as mine good machine has done good for us very basic which is good

[@agoodbluewilldo8359]

Adrian, goin to do a bit of ploughing and reseedin next week. Have u ever put slurry on after its ploughed, before power harrowing of course? Any advantage to it

[@IFarmWeFarm]

Yes it works very well, the more the better. Advantage is simple, it won’t cake on the ground or need to get washed in, its there and working from day 1

[@odhranbyrne7434]

i’ve a quickie 340 loader on a 100hp massey and it’s a little big for the massey so i dunno how it’ll do on the case

[@davieanderson3856]

Great tractor loader combination that I drove for many years. The only tip I would give is fill the back wheels with water as it makes a hell of a difference to stability. The full beam is on the indicator switch like a car just pull it forward for on forward for of

[@IFarmWeFarm]

Was thinking that, but our’s doesn't do anything, will have to look closer at it as it’s probably a relay that’s at fault. Were getting a weight block for the back to finish all off

[@davieanderson3856]

IFarm WeFarm the 895 we had used to draw the silage bales with a trailer and load so got a bit hairy at times wit a back wheel lifting. You won’t be disappointed with it

[@nicklad9463]

Why not put a loader on the Massey since it wont be used with the rear loader

[@IFarmWeFarm]

We would need it if the case is able to handle the feeding, besides we want to run our hedge cutter on it for the winter

[@delidan1]

Looks like you look after your kit!

[@scotiain481]

She’s a clean and tidy example of a 895. We had the stockman version on the loader and handled it well

[@cathalroe687]

I’ve the same loader on a 895 . Service the engine before you put loader on really awkward once it’s on

[@IFarmWeFarm]

Can you send me a video on Facebook or Instagram of the latching mechanism on the front, want to see where the tension spring should be attached and if that handle is bent 👍

[@carjacker0]

You should do a little out-take blooper at the end of each video , would help to put a smile on everyone's face till the next time. just a thought sure what could go wrong. ;)

[@willfox4714]

Don't get rid of the Case, she's very clean and tidy

[@jeremydaniels305]

Older machines which are well maintained is the way, too many potential electrical issues with the new kit. How reliable would a tractor purchased today be when it reaches the age the Case is now.

[@Nialll87]

Hello Ifarm, is the full lights not activated by the indicator switch when the dims are on? If I am not mistaking, turn on the dims via the switch and then press the indicator forward to turn on the full lights? Also you can flash the lights by flicking the indicator switch to you. That's how it was on the 885xl we had few years ago

[@IFarmWeFarm]

Ours doesn’t work so it must be a relay that’s gone

[@philipjmcloughlin5880]

Good vid best of luck with loader should be a good job

[@mikeyfromkerry8722]

We have a 4270 it's a great tractor were milking 108 cows

[@poleary9292]

Repaint the red on the doors to match the rest of the tractor!

[@IFarmWeFarm]

No I’m thinking of repainting the tractor to match the doors 😉

[@samr8833]

Thomas LED make good quality led lights so it might be worth checking them out

[@IFarmWeFarm]

I will do, thanks mate

[@johansoons8413]

Wel my frend u got a new follower from flanders belgium. Loveley what u are doing. cheers and greetings.

[@IFarmWeFarm]

Hello to all in Belgium 🇧🇪, Welcome to the Channel and hope you enjoy 👍

[@trystangaynor325]

What is the name of the man that spreads machinery for you as we need some done

[@IFarmWeFarm]

He told me not to say because he’s only going to do this for me as he’s a friend of mine for years, normally only paints cars. If you know any panel beaters you should ask them as they’ll be glad of the work

[@trystangaynor325]

IFarm WeFarm The thing we want to get somebody to pain is a diet feeder

[@johncrosse9964]

You finally got a loader 👍

[@upthereds4939]

Lad it feels like I’ve been waiting a long time for this 😂👍🏻🙌🏻

[@upthereds4939]

You hit the jackpot there Adrian you wont know yourself now, great purchase 👍🏻👍🏻

[@noelmartyn9034]

Thank God she is staying.

[@johnleonard7963]

Good man for not selling case great wee yoke better the devil u know what i say 👍👍👍

[@pauldoc567]

She’s a fresh yoke yet!!

[@causewayfarming4x494]

Indicator stalk for high beam

[@colmcoogan92]

There full light on that same case 895 xl

[@shanereade2114]

Some clean tractor for its age

[@lukagiltrap77]

Tis a grand joystick in all fairness!!

[@IFarmWeFarm]

One off a kind that

[@antonyfarming]

Great you won't regret it 👍 has it 3rd service on the joystick?

[@IFarmWeFarm]

Hopefully so, Yes it has 3rd service

[@jimmyd390T]

Please yourself with your new decals but lotus design in kilrea will give you a better match to original than anyone else I know in the north.

[@JonDingle]

Tidy tractor and worth holding on to young man!

[@danielmccallister7719]

I have a 885 with 3800 ish hours

[@Fordman99.]

Love ur collie dog btw

[@michaeltangney5212]

You will have to purchase a 500kg weight block for the rear so she won't lift or turn upside down!

[@archiearmour2828]

If you find case is light on backend you can put water in back tyres so you don't need a weight.

[@michaeltangney5212]

@@archiearmour2828 haha until it freezes 😂😂

[@archiearmour2828]

@@michaeltangney5212 anti freeze will do the job

[@michaeltangney5212]

@@archiearmour2828 haha 🙈🙈

[@danielwilkin4444]

I think I passed u today in a massey 7720 at tractor run in cavan

[@russellpetrie119]

is it worth sandblasting the loader

[@IFarmWeFarm]

We would have to remove a lot of stuff to sandblast it so probably not, a good sand and degrease should be 100%

[@cjyt6491]

There’s one to stop the laughing lol👌

[@harry.bethwaite]

Nice video but make sure you put it together on perfectly flat ground

[@aaronwymbs4710]

That's a great tractor

[@christopherwalsh1573]

I love the case 885

[@pjdoyle5105]

Great video.

[@johnfoley9617]

What horsepower is your massey 6470

[@IFarmWeFarm]

135HP

[@johnfoley9617]

@@IFarmWeFarm nice I'd say it could pull a massive tanker my ts115a pulls a 2500gal abbey

[@seancollins926]

A tractor loader is the best purchase around the farm .

[@ant-gn4tp]

Tats a really fine case

[@shanebergin3358]

that case is mint love it

[@lfcfan2490]

This video is going to blow up

[@FIAT-TURBONewHolland]

I love bkt my self great tyre bit cutty on soft ground but good job .. us donegal men like a bargain .....

[@jerryodriscoll3691]

Us cork fellas are the same 😂

[@anthony342]

another super vid ...