iFlight Nazgul vs. Cidora SL5 | ONE SETTING TO MAKE THEM FLY AMAZING

[@LuMaxQFPV]

I have a 4S Nazgul 5. The first time I looked at the video from the camera , I knew something was off..... Used the provided camera controller to get into it's menu, reset a lot of stuff.. I think it was set to PAL, and had other odd settings. Changed several things, got my saturation just the way I like... now, when others look at it's video, they always exclaim how gorgeous it looks. Bright, colorful, but not over-saturated or with artifacting. I'd bet getting into the cam menu and checking those will solve that blue noise in the shadows. Agree on the battery pad... the oem is not good, Ummagrip works great. Also, flying at night is AMAZING. Color and sensitivity is outstanding! Really cool experience in twilight. Have to admit, after crashing many, many times... I have yet to break any single thing on this quad. I'm really impressed! I paid $165 for mine, without receiver. I took my arm bumpers off, as the 'squishy' TPU kept me from properly tightening, and keeping the motor screws tight. Plus, after a couple of weeks, they warp down and away from the arm, and look sloppy. As for the Antenna jack spinning loosely, the fix is to use 2 regular and 2 star washers, and tighten them to the TPU with Blue locktite or similar. This will semi-permanently anchor it so that that connector will stay put. even after crashes. As always, Joshua, thanks for what you do!

[@maplefpv]

I have the nazgul 4s as well and I gotta agree with the stuff u said. I got a gel pad with mine, and about the camera, after resetting the settings and switching it to PAL, looks beautiful. One thing I would recommend with whoever has the nazgul 4s is that: stay with 4.0.6, in filters disable gyro 2 and 1, dterm 2. Set ONLY dterm 1 lowpass 1 on, to biquad with min 60hz and max 175. These settings on top a good tune makes this quad a dream to fly.

[@manvsfoodfpv]

@@maplefpv i am looking comment about nazgul5👌

[@neilfeatherstone824]

Maple FPV waiting for mine to be delivered, in new to drones so I’m interested in your comments but they don’t mean much to me, is there a simple version of what you said? Haha 👍

[@haxhxm841]

can i know what receiver u ur using with the nazgul5

[@jamesnitsch5238]

Hey Lu Johnson, which settings did you change to make the camera look nicer?

[@d.o.3293]

The moment JB admits he is not a robot and draws light to the fact we all have inherent bias. Freaking genius. JB is the most self aware and honest reviewer in the business.

[@chrisB_OG]

yes! well said

[@mcfly22005]

I must confess one of my absolute favorite things about Josh's videos is when he does a punchout for whatever hangtime maneuver hes setting up for , then he kills the throttle and a half a second later it seems like, you hear the echo of the punch out. I love the view out there wherever he lives its absolutely beautiful country and its so quiet.

[@airfriedquadsbw]

Just got the nazgul v2 6s with crossfire. Best quad I ever had. Changed my fpv world. Goes rite where it should. Like smooth rails, slide a corner. Or bank tight. Live it.

[@MBrulla]

Joshua "I've Got a Video for That" Bardwell. Great review! Very in-depth, as always.

[@fpvjitsu8861]

thanks JB i ordered a Nazgul last week cant wait to try it and thanks for the CLI dump. You do alot for us guys thank you.

[@AndrejSturm]

Out of the box the current meter is not calibrated on the Nazgul5. Not a big deal though.

[@madladdan]

At 15:34 it looks like your mmcx to sma cable is broken at the sma joint when you wiggle the tpu mount. Mine also broke. Seems like when the atennna flexes towards the rear props it pushes on that stiff cable and bends at the join.

[@BengalCatChilli]

Just to confuse you guys trying to choose between the two...add in the cidora-SL5-e. A budget version of the cidora. Bonus - those rubbery/silicone jar openers make really good battery pads. You can usually get them from a dollar store.

[@mikehoffman9119]

I use cellphone dash pads. Super cheap and you can "renew" it just by wiping it down with some H²0

[@sowhat-fpv4137]

I tried 6 or 7 different prop on my Cidora and best for me was GemFan Hurricane 51466.Really brought the quad to life.

[@noname-xq5ie]

JB sometimes i watch the same reviews more than once , esp the reviews on qwads that are in the post.Great reviewer , great live chat great discord and his flying is somewhat improving rapidly

[@Gosuminer]

Flying the Nazgul5 6S for a few weeks now, ordered it because it costs less than the components combined and all the components are really nice. Banggood advertises it having 1700kv motors but mine came with 1800kv and with the higher kv the Nazgul props work nicely, though I would rather recommend something like the Gemfan 51499 or the HQProp 5141. The weight difference between the Cidora and the Nazgul5 is propably down to the LEDs on the Cidora illuminating whatever is *above* it (??) and the skids. Propwash handling with stock settings is abysmal as demonstrated by your flight footage. With JESC and RPM filters however it flies amazingly smooth (rigid frame and good bearings). I love the picture of the Ratel which is right up there with the best FPV cams money can buy and I did not notice discolored shadows. The FPV antenna surprised me with good performance. Adding a GPS was easy, too. Pro: Solid components, perfect build quality, price. Con: Antenna mount not perfect, needs some configuration, i.e. current and voltage sensor calibration. Would recommend, best value you can get.

[@xpycFPV]

Stock pids for 6s are ok?

[@Gosuminer]

@@xpycFPV Yes. It flew fine with stock pids out of the box, not perfect but already quite good and totally flyable. With RPM filters and reducing other filtering it was even harder to get propwash.

[@kacimierz]

I read a lot of stuff, I watched a lot of your videos which were very helpful. I decided to get the nazgul5 4s as my first quad, went for a 5 inch because I live in an area that has a lot of places to fly it safely. I know it might be more expensive to repair but I'm alredy used to repairing stuff from my rc cars. Anyway keep fingers crossed for me, I'm looking forward to the first flights and the first mods, probably some that you recommended like BF update etc.

[@joshuasterling2144]

How did it go?

[@kacimierz]

@@joshuasterling2144 Very nice of you to ask on an update after some time. I am very pleased to say that I got hooked onto the hobby. I now own three 5" quads (wife only knows about two :D), just bought a whoop for winter, upgraded my radio to a tango 2 and goggles to hdo2 and I pretty much try to fly every single day as long as the weather allows it. My flying skills have improved significantly over these 3 months (there's one video on my channel, nothing special, just one random pack I threw on youtube to show my friends). I've met a lot of great people thanks to the hobby, I even participated in a chill-race event on an indoor gokart track, quad took a beating but worth it.

[@joshuasterling2144]

@@kacimierz Very nice, I go in spurts especially during the fall and spring when the weather is temperate. I just got done getting all my DJI gear together. Two DJI goggles and six air units, some that are in pre builds or yet to be used. Lets just say ramen was on the menu but it was totally worth it. I just managed to pick up the explorer lr from flywoo with the DJI system and its a blast of course.Cheers and its always good to hear from others who share interests. 👍

[@salem.mcmxci]

@@joshuasterling2144 hey 👋 im new to this and noticed you have the dji goggles eventhough i was told it’s not compatible with the nazgul 5 ..only the nazgul hd ?! Is that correct?

[@joshuasterling2144]

@@salem.mcmxci Yes, the Nazgul and the XL5 work only on the DJI with the HD version. You are looking either for the Caddx Vista or DJI Air Unit in the frame, that is also a great visual indicator when you are looking into the frame. The normal versions of those quads will not work with the DJI goggles.

[@teamferret]

Saw you were visiting us in the PNW today. Hope you're having a great time with the crew!

[@jasonburke2596]

Hey Joshua I've just ordered up a Nazgul 6S. I'm going to bind it to my Jumper T8SG. I'm a Betaflight noob so it's good to hear that it flies nicely straight out of the box! Great video, highly informative and your flying skills are the dogs danglies!

[@MrSabram07]

Dogs dangles lol

[@flywithafatguy5825]

I stuck around till the end.. Thought there was gonna be flight footage of the one with betaflight 4.1 tuned up and all?

[@JoshuaBardwell]

The editor will have to be slapped. *ow*

[@miklosko3355]

@@JoshuaBardwell 😂👍🤫

[@Sylo2Nice]

Yea i thought the same. Wtf . That shit got me mad. I guess 4.1 didnt make it fly better if anything its the same

[@abdulrhmanalaryani8946]

@@JoshuaBardwell hello Joshua Bardwell i just got the iflight nagual its my secound drone the first drone i messed up the fc so i bought the i flight without reciver can u please tell how to connect the reciver to the fc i have the fs-ia6b reciver and tell what i have to do on the remote controller setting i need help please i cant get help from youtube because i am deaf i cant hear and talk please

[@cilipo]

@@abdulrhmanalaryani8946 I managed to do it today after much searching on the internet. I bought a FlySky x6b receiver, connected it by ibus, and soldered it as it shows in the image. You also have to configure in betaflight as indicated in the image. myosuploads3.banggood.com/products/20191129/20191129042419QQ20191129181246.jpg RECEIVER:www.banggood.com/Flysky-X6B-2_4G-6CH-i-BUS-PPM-PWM-Receiver-for-AFHDS-i6s-i6-i6x-Transmitter-p-1101513.html I did not do it with fs-ia6b because it did not fit in the frame I hope it helps.

[@jimscobie6646]

This is the exact review I wanted to see. Fantastic!

[@airgun1974]

I have the 4s Nazgul and like it alot. I added the same gps from your "gps" video but used the 3.3v since they had warnings on the page not to use 5v. I haven't upgraded to 4.1 yet thanks for the cli dump!

[@mcattee1983]

I was just looking at the iflight nazgul yesterday. I'm glad you did a review today

[@LokaLize]

Me to 😂😂

[@RADERFPV]

Very envious of those solder joints. I couldn't solder that good if my life depended on it. Very impressive. Thanks for the great review of these bnf's.

[@flo-ridafpv5713]

Ya just need a 12 year old Chinese girl who's done 17,000 joints...or just use flux man ;)

[@Kopterheld]

very nice review, thanks, My Nazgul5 6S version is current with the 1800KV motors and there are similar to the 4S Version with 2750KV and come with better grippy rubber battery pad. my nazgul5 6S is from BG

[@adrianestrada4137]

Joshua very good review, thank you. I have the Nazgul 6S and you just confirmed I made the right choice!!

[@minime4460]

iFlight now have the iFlight Cidora SL5-E version. Same as Nazgul except you can buy it from your local shop and support a local business. Like me! All of them are good.

[@jorgeromero4680]

I haven't seen the video yet but I would like to say that the vtx of my brand new nazgul5 burned at the first flight. You may want to also upgrade the capacitor for the 6s version to 1000.

[@SQuiDFPV]

Blew one on first power up.

[@flo-ridafpv5713]

Get a $20 AKK vtx they bulletproof n only make vtxs n oem for lotsa big mfgs

[@SQuiDFPV]

I replaced the vtx with unify evo and a nano rx. The vtx had to be sent back faulty. So now has a tramp in there.

[@moedabs]

This happened to me as well... couldnt confirm it was vtx but i suspected as much...now im pretty sure...

[@SkyCandyVisuals]

i have found on iflight frames that the rear of the carbon on the top plate where the bat cables come through is shaped exactly like the xt60 connector and if you shorten the cables you can slide the xt60 right inside of the U shaped curve and it will snap in and hold very securely. Only prob with that is in the event of a hard crash and battery ejection you risk damaging you xt60 but it makes for a very clean look and easy one handed plug-ins. WIN SOME LOOSE SOME

[@89vic3]

When u said come here. I ALMOST WALKED TO YOU

[@lgrip1688]

yeh know the feeling, I have had a ruff week, I put my head closer to the computer, like that was to funny,,

[@meralharbes]

@@lgrip1688 Let us know if you wanna talk about some stuff. Plenty of nice people on the internet too. :)

[@alexmerle66]

the configuration of the Nazgul that you have left in the description (pastebin) is valid to apply to the Nazgul 6s? thanks for your work

[@vermilionpulse]

I just got my Nazgul and am so excited to get out and try it. Tomorrow is probably the last clear warm-ish day of the year though.

[@michaelgrigorian4575]

Great video just wish you would have compared the nazgul5 6s version because the motors are 1800 instead of the advertised 1700

[@lfrecords3970]

i waiting the 6s nazgul...for 140 usd with discounts etc...its nothing to have an extra quad and i ll compare it to built quads of 400-500 usd....the only thing that i m curious is the reliability and how it will last over the flights even without crashing almost at all if not at all.! Something else...if anyone here knows well about rewinding a motor...please if possible reply...i m rewinding a motor ...and i have some heat problems even if it works it heats up in seconds...and i m trying to figure out why.

[@NJOverclocked]

I have a Nazgul5 and I use velcro instead of a battery pad. Works great

[@johncarold]

Hi Josh Great video and review of both the Nazgul and Cidora . I don't know what one I like more. But for the money I would get the Nazgul. Thanks again for the info and advice

[@quadspeedfpv]

Good review Josh full of very useful information thank you I have not flown either one of the BNF from iflight but I do like a lot of their products including the xing motors I have them on four of my quads currently as Always great review keep up the good work

[@lockingpaul]

How does one get over the fear of crashing. It totally hinders. This drone seems to do pretty good cidora. Do u think it’s worth while still buying quads over 249? The naz seem as way quicker and agile. I love the sound of the punch 🥊 Thanks for showing.

[@MeadowlarkFPV]

that was a heck of an intro JB!!

[@bighornriverpaul]

Thanks Joshua. I have the nazgul5 and love it.

[@jt37218]

Nice review. I have a 6S Nazgul and it's a fabulous BNF quad for the money. The 6s version is punchy and plenty agile. Not a fan on the Caddx Ratel on this and it's slightly out of focus out of the box. I have since converted mine to DJI FPV via GEPRC Mk4 HD5 frame and it still flies great with the HD FPV. Succex E stack and Xing E motors are good value components without the more pricey bling.

[@jodyking7278]

Thanks for the new tune. I'm only about 6 batteries worth of flights into this "real" quad. I've been flying a Tinyhawk s for a few weeks and having a great time. What are the correct settings for the current meter? I have 1800mah racedayquads batteries but the OSD was only showing 380ish mah used after a 6 min flight. Also like the voltage might be off a bit because when OSD showed 3.5 in a stable hover, my external meeter showed 3.7 after landing.

[@jtyokomo]

"Antenna tubes look good when you first install them and then they disappoint you..." lmfao. love JB videos

[@graywoulf]

I just bought a Cidora. I have heard that Betaflight 4.1 was a flop. Will this upgrade to BF 4.2? And I thought that it was limited to 4S as well. Thanks for the review and tip about the prop upgrade.

[@nonenone6425]

Cool man...great video.and again I learned something ....thanks again sir .....i get my nazgul 4s tomorrow

[@MrJKillarado]

You might have talked about this in your video and I just missed it, but I noticed you were flying the Cidora on 6s and being that quad comes with 2450kv motors I was wondering if you flew it with a throttle limit or did you just compensate the throttle manually while you flew it. I have 2208 2450kv xing motors on my Rooster and I fly it with 5s, no throttle limit, and full on rippin and my motors are just slightly warm. So I'm confident with flying 5s on 2450kv motors with 5146 Dal props. But I would be hesitant to fly with 6s full on rippin. By the way I'm also getting 3:45 flight time on 5s so efficiency of my quad isn't a problem on 5s either. Thank you JB!

[@vobja5]

Great, thanks so much for this vid. For a newbie noob like me, What remote and goggles does one have to get with this drone?

[@Jimmyfpv_]

Your comment is 8 months old, so you probably already know. But I'll answer for any other person who might find this useful. Goggles: Any ones that work with analog signal will work. Goggles pick up the signal, there is no binding involved. Which ones to get, well, there are many options that vary greatly depending on how much you are willing to spend. If you are a newbie, I would recommend the Eachine EV 800D because they have diversity, built-in DVR and can be converted into a monitor. But there are many many options and you should investigate on your own. Remote: Depends on which transmitter you order it with. If you chose the Frsky option, then you need a radio from that brand or other which is compatible. A good option for FrSky radio is the Taranis Q X7. Another one which is a bit cheaper but also very good is the Taranis X9 lite. If you decide to go for the Crossfire option, then you either need a TBS radio or to install an external TBS transmitter into your controller. I hope this helps.

[@grabszmyd]

Hello Joshua You did not talk about the small black lines with the vtx nazgul (vidéo noises) Have you changed the condo with a bigger...... Thank you for your reply !

[@YuriRosas_]

To solve this only by using an electronic device called LC Filter

[@gmascagni]

lol I watched the whole video waiting for you to show footage with your custom tune. Wanted to see if you tuned out the propwash but in never came. No worries another great review. It definitely looked like the Nazgul was faster. You could hear the pro's working over time on your punch outs. Were you flying the Cidora on 6s?

[@TechVerified2K]

Another thing which I dont think was mentioned, Nazgul is an XL5 V4 True-X and the Cidora is the SL5 V1 which is somewhat a squished-X, i say somewhat, as it s not as squished as most squished x frames, qavr, alien, reverb. Still its squished enough to classify as a freestyle squished x. I have two of the cidoras I built with similar specs as these, both fly great. @Joshua Bardwell, do you agree that the Cidora is not as squished x as it should be?!

[@JoshuaBardwell]

As long as I don't see props in the GoPro I don't care.

[@tiagotiagot]

Regarding the VTX antenna, maybe you could heat the nut and make it a captive nut by pushing it into the plastic?

[@freeridefilms7254]

Hey great video, I’m looking to buy a budget fpv drone and am stuck. So here is my question if you were looking to buy a 6s drone to do some free style and cinema flying would you buy the Nazgul 5 6s or the geprc mark 4? I’m ok with upgrading in the future and just want the best drone for a base to upgrade as I progress

[@SiamFpv]

The Nazgul look a really good quad for this price ! Thanks for the review !

[@neojeets]

I've been enjoying the 6S version of the Nazgul. The xing 1800kv motors perform pretty well. Great value for money quad.

[@dertom1981]

02:39 - quad sounded like you shifted it's gears.. :D

[@jeremybartlett2966]

Mr. Bardwell, What receiver option? Choices are- without receiver, FrSky R-XSR , or FrSky XM+. Please help. “Im new and I don’t know what to do” BTW flying W/ Taranis X9D Plus SE 2019 & FatShark Attitude V5 OLED. Thanks again. Great review BTW. Exactly what I was looking for!!!

[@JoshuaBardwell]

R-XSR would be my choice.

[@gvs3259]

I know tis is an old video but do you now or have you ever used dual lock velcro with your frame and battery? I have been using it along with a grippy battery strap and it seems rock solid. What downside can their possibly be? thanks in advance.

[@SplashFPV]

You forgot the flight footage after 4.1 update you promised in the video 🤣. Excellent quads though. On my cidora all screws were loose so you should check them always. Iflight build quality is great, soldering is state of the art.

[@SQuiDFPV]

Yeah and the tpu add ons just stop you from screwing everything down tight. Took mine all off

[@ufopilotFPV]

The screws come loose with flying too so check em at least once before each flight session

[@matttucker7348]

So I started out with the tiny hawk rtf kit and learned the basics of freestyle fpv. I have progressed quickly after getting the tiny hawk freestyle. I’ve got pretty good ripping in Acro. What would be a good suggestion on the next quad I should get?????

[@Silikum]

I have the Nazgul 5 4s and I like the Camara. I don't get the blue shadows. Maby they have changed it. They also changed the battery pad

[@daFexKM]

I think I didn't get the party where he said why he's recommending the 4S Nazgul over the 6S version. Why not the 6S?

[@tehllama42]

On the stock props, you'll want a higher KV setup for it to feel great. To be honest, if you like the Nazgul more, and want crazy performance, get that in 2450KV and run 5S with a bit of throttle limiting - best of all worlds. If you want to run different props, then either 6S will fly great.

[@ysdyds6449]

id love a review of the Nazgul v2, maybe vs the old one? or a similar contestant? Love your videos!!

[@paulstone9755]

The Cidora is a fine frame. But you are right it should be a 4S pushing 2207/2450 motors. And it will rock the house. 6s is not needed for free style. 4S is great for that, lighter and can rock bigger motors with about 4 min flight times. Perfect.

[@zacbarnes9075]

Not sure if you still see these from older videos. But how would you compare these to the T-Motor ft5? And are you going to do a review on it?

[@NorthStarDrones]

Great flying 👍, great video thanks

[@reztoration3334]

Hi I'm new to FPV so on not really sure if I'm doing something wrong or not. I have the Nazgul 5 and I am finding that I keep chopping up the 2 antenna covers every single time I fly. (even when I don't crash) I can see at 14:44 of this video JB has done the same to one of his right antenna protector. I have changed the props to see if that would help, but its still happening. Is there a good solution around this?

[@JoshuaBardwell]

kzbin.info/www/bejne/gXKVgH-Kd66dgc0

[@mattk8859]

Hi Josh, nice review of both. I have the Cidora...the props it comes with doesn't do 6s justice. The Caddix ratel cam came with colour setting way too high and so I adjusted down and oh man what a cam! Perfect picture, stunning, might even say better than my runcam eagle 2 pro. The succsex f7 has "twinG" but only works upto 8k8k but very smooth. It also has a dedicated "cam" pad to solder OSD pin from cam to fc for cam control (no CLI to change). Iflight hadnt connected this, i did. Why they didnt, i dont know. The TPU arm gaurds and the LED's look nice but it is a weight that can be removed. I'll give your config' a go but UK weather is a b#tch having all four seasons in one day. ""Happy flying you'all"

[@abdulrhmanalaryani8946]

hello Joshua Bardwell i just got the iflight nagual its my secound drone the first drone i messed up the fc so i bought the i flight without reciver can u please tell how to connect the reciver to the fc i have the fs-ia6b reciver and tell what i have to do on the remote controller setting i need help please i cant get help from youtube because i am deaf i cant hear and talk please

[@richard4559]

Hello Joshua Would a Go Pro Hero 8 would be too much weight for either of these Drones. ? Thanks

[@vasilisfellouzis]

Nice review i would like to know your opinion on the 6s Nazgul5 ..

[@joenaylor34]

I have the Nazgul 6S and want to add a compass. Is there a free UART? Is there a diagram which shows where the TX, Rx, 5V and GND pads are??

[@pippifpv]

Great review/comparison, Joshua.

[@billgates7221]

nice i have 2 nazgul 4s's & 1 6s, love them

[@edyhadhari4873]

Im considering to buy nazgul... Which one u prefer... 4s or 6s?

[@TopGian]

Great comparison! What do you think about default PID? Did you change them or not?

[@ivanfpv1767]

Hello I need help with my nazgul5 4s, update the fc for the rpm and I do not get it to fly well and cooler engines and I would like the stock configuration that was going well for me.help please thank you very much

[@joenaylor34]

I have the Nazgul 6S and want to hook up a VIFLY Finder 2 to GND, BUZ+ and BUZ-. Are these pads available on the FC? I cannot find a wiring diagram for the FC.

[@cpicard3740]

I wonder how the new SL5 v2.1 would do against the Nazgul? Maybe the ironed out the kinks

[@DoctorWhom]

What are your thoughts on that OSD layout? Is it better to have them raised upwards like that, or at the bottom of the screen? Lookin at 2:20

[@JoshuaBardwell]

No that's a mistake. The OSD is positioned for NTSC but it's a PAL camera.

[@Harald787]

iFlight makes really good FPV Freestyle frames. I have build and fly the Turbobee 120, iX2, iX5, XL5 and a long range XL7. All great. Just learned that iFlight is a DJI company so perhaps that explains the good quality.

[@pippifpv]

You just blew my mind 🤯 didn't know iflight is a dji company. Not that it matters much to me.

[@leole9449]

Thats the video i wait for a very Long Time wooho

[@paulmccleary6875]

Hey Joshua I had a question about a command in the CLI line and applying it to beta flight 4.1.4 I wanted to know should I enter paid some limit = 1000 to unleash PID in the Nazgul 5 6 S version ?

[@neilfeatherstone824]

You are awesome! Been watching your channel tutorials to help me learn to fly, just using SIMs at the mo really but I got a Emax Hawk Pro (got a nazgul on order) what’s your best tip for my first real FPV flight? Thanks.

[@ufopilotFPV]

Take a deep breathe and send it !

[@JPREEDY77]

I thought that antenna mount was supposed to have 3 washers, lock, round and star?

[@dizzydeanfpv45]

Just bought the new 6s version iflight... well about a month ago and used the affiliate link hope you can retire now?!?! Lol this drone is a beast and super fun to fly I'm saying this and I already have 4 other builds with much "better" parts esc, motors,etc... just can't believe how this rips!!!! I'm a huge fan JB and I owe you some gratitude 🙏 without you I'd be lost in fpv cheers

[@davidtomasgaitanrodriguez1356]

Hi guys, I am checking just now if the arms of both the SL5 and XL5 V5 frames are the same. I think they are, but I cannot find exact measurements, do any of you know for certain?

[@jhughes2286]

I don't think you went heavy enough on the props my brother, those hq 4.3 pitch props are pretty weak gemfan windancer 5043 are a better pairing I think. What do you think about this?

[@ufopilotFPV]

I think the stock props were too weak, stuck some juicy props on and its much better

[@finkelmann]

Would you say the Nazgul is still the trusty budget BNF to beat even now in 2020, or are there any other obvious choices?

[@ziontsui9656]

The freestyle at about 10:00 is just so cool

[@mrmidnight32]

Which is better? The 4s or 6s Nazgul? I have a 4s 5" and want to try 6s.. but am not sure if it has downsides over the 4s...

[@nathanvegerano8649]

Hello JB, i have a question. I activated the bidirectional dshot on my Nazgul5 and follow all the settings in your video then save and reboot, i even buy a JESC firmware for BLheli S ESC, but when i get back to configuration tab, the bidirectional dshot is not activated... . Maybe the board of Nazgul5 is not supported by bidirectional dshot?? Please help. Thanks.

[@QuadDamageFPV]

LOL - I had a few flights with the Nazgul before my brain kicked in and realised airmode wasn't on. Flew nicely afterwards.

[@SpreadingKnowledgeVlogs]

Hey Josh i got the dji titan and the megabee the titan flies nice seems to have tuned pids but the megabee doesnt im wondering can you get me tuned pids for the megabee? also im getting a vibration on the titan but only when hovering at certain rpms and its definitely not my cameras because its coming threw the dji system and my run cam 5 so its not the mounts wondering what you might think it could be this is almost brand new so im stumped.

[@beardedalienfpv1294]

Josh one question I have is can I change the feet off the cidora and put them on the nazgul? I was going to purchase the ptu for the nazgul for more protection on the screws

[@eisenbherg]

Yeah, I would like to know as well

[@prottentogo]

Antenna placement underneath the arms? I thought you meant in a 90° angle. That’s not „underneath“ tho. I’m confused.

[@JoshuaBardwell]

kzbin.info/www/bejne/gXKVgH-Kd66dgc0

[@elBo-gd]

i dont know if its possible, but maybe you can make new review and compare iFlight Cidora SL5 V2.1 HD vs Nazgul5 V2 HD :>? What do you think :D?

[@ca8064]

Hi, i have a problem with my Nazgul 5. I cant Switch the frequence of the VTX by pressing the butten, even If i follow the Instructions correctly. It just jumps back to a speciffic frequence. I use the Fatshark Attitude v 2. It would be nice If someone could help me. And sorry for my bad english

[@paulmccleary6875]

Hey Joshua great video !!! Can I copy & paste these settings you have for the Nazgul 5 in the CLI ? I just flashed my Nazgul 5 to Bettaflight 4.1.4. I paid for the JESC four pack Blheli license. Is it still okay to copy paste these settings ?

[@JoshuaBardwell]

I think probably so.

[@althafraja544]

hello, i am a newbie and i dont know how to do your nazgul base config setting like on the link that u gave, could you please make a video about that ? so i can easily follow your instruction about how to set the nazgul config, pleaseee, thank you.

[@brettalexander.studio]

Would changing my motors on my 6s build from 1800kv to 2150kv help with a heavier cine setup? I have a build where I’m trying to hold 2 GoPros and 1800mah battery and the 1800kv Xings seem Kinda weak and struggle with the extra weight. While it is a cine setup, I am still looking to do advanced acro.

[@scrogfpv7443]

How do you determine the prop pitch you need? More aggressive pitch equals better freestyle?

[@stefanopangilinan3003]

Can you please review the HGLRC Sector5? I know it's similar to the Nazgul in terms of specs and price, but I wanted to know if you think it's better, worse, or about the same

[@ianyboo]

Bardwell finally doing ASMR! Bout time! A+

[@SQuiDFPV]

Ps cut the nazgul rx and vtx antenna mount in half. Now I mount the rx on top of the stack and the vtx fits in the back perfect. Using different vtx

[@eZFlow]

Yes, Grommets are rubbish, especially on FatShark 18650 holders they just cut through the wire and mid-air black screen! Both mine and a friends failed within a day of each other when bought at a similar time too.