Igniter screen dead dead zone fix.

A video of me fixing my LG G2 AT&T D800, dead zone on screen.
Using a quartz igniter from a lighter.

[@jigarparekh78]

thanks a million, it worked!!!!!!! I fixed my dead spots on my cell phone within seconds... I used normal home gas lighter with flint ....God bless you! you saved lot of my money since I was told by the mobile repairman to put a new screen altogether.. once again thanks a lot!

[@strangedude9008]

was that a permanent solution, or had to repeat one was powered off?

[@operitivexdm]

$2.00, 15 seconds, i have my phone back. ive been posting about this and refering people to this video. as it took me 2 years for this answer, i dont want that for anyone else when the soloution is so simple... your videos saved my phone and my sanity.... thank you so much....

[@cptnjarhead1]

+Dallas dallas I'm glad it worked for you. Its not a permanent fix for some. If you have an LG G2 and the deadzone comes back.. try this Try going into the hidden menu for "LG G2" only Go to your phone dialer and enter the code for you model. 3845#*802# (for International model) 3845#*801# (for T-Mobile) 3845#*800# (for AT&T) 5689#*980# - (for Sprint ) Dial: ##228378 + send (Verizon) Then go to HW device test. Touch Test, then scroll down to Check Synaptics Touch Panel. run that test until each category passes. when you have pass on all 4, leave the phone in that menu for a few minutes. Just set it down and leave it for a bit. I have found that by doing this, you do not need the igniter, but if you exit the menu too quickly, you will get ghost touches. Just stay in the menu for a few minutes. This works on my G2 every time, i will make a video next time this happens. Hope this works for you. If your knock knock stops working, then run the Touch Firmware upgrade in the same HW test menu. That usually solves the knock knock.

[@akaihola]

This actually works! I was getting more and more dead zones and ghost touches on my Fairphone 2. I used a handheld gas igniter and didn't even take it apart - I just placed it against the screen and clicked a couple dozen times. All problems disappeared. Thank you!

[@FireVortex720]

Holy crap dude, God bless you, my Samsung s9 had touch screen problems for a year and the ghost touch started a few days ago. I was about to spend $200 to replace the digitizer but I saw this video and bought a $1 lighter instead and it worked!!! Thank you!!!

[@DiceHoover]

Was going to buy a new phone, I was skeptical about this but I gave it a try for desperation and it saved me! Many many thanks

[@TakiTamMagik]

Dude, you're the real MVP. This actually worked! I was electrocuted, but I'm not even mad, that's amazing. Screen is working just fine now on my G3 :D

[@Yvonne_ozlife]

hahahahahaha I have been zapped by those horrible things and I was waiting for him to be zapped!

[@TreDogOfficial]

Adam Pyźlak I'll remember to wear rubber gloves then

[@paulc4878]

Thanks so much! Feeling my G2 to have new life (and me too) after apply this fix!!

[@EmmiEmsen]

Found this video through a blog, never would have thought that would work.. Huawei P20 Lite, i had "Ghost Touches" basically on the same spot you have your dead zone, and it just worked. The weirdest thing though, the "Ghost Touches" also weren't there when I had my phone plugged in... Wonder what that's about. Anyway, thanks a lot for that weird, but very helpful trick! Even if it shouldn't be a permanent solution, it's easy enough to just repeat it when it happens again (and hopefully it keeps working!) :)

[@jpsinger16]

Thanks! This trick worked on my LG G3. My dead zone was near the bottom of my screen so I couldn't even enter my PIN to access my phone. I bought a Bic Clic piezo lighter, pried off the metal top, and then the clicker slid right out. After just one click over the affected area it was working again. Part of the dead zone still exists, but at least the "OK" button for PIN entry is working again.

[@cptnjarhead1]

Glad it worked for you. This is not permanent but its cheap.

[@jpsinger16]

You're right, it's definitely not permanent. I've had to spark it multiple times a day. I take the igniter everywhere with me now! Time for a new phone.

[@cptnjarhead1]

sounds like an addiction problem.. lol. Yes, it can be intermittent. If you google lg g3 hidden menu, there are some diagnostic options than can sometimes fix the issue, or at least last longer. I'm not exactly sure what the G3 hidden menu looks like, but on the G2, you can run the Check Synaptics Touch Panel until all the test pass. when they do, just leave the phone sit for a few minutes. Then exit out of the menu and see if the dead zone is gone. This worked really well on my g2, and lasted much longer than the igniter.

[@sidhusidhu3688]

@@cptnjarhead1 is it also for i phone

[@chucksullivan7933]

I can't believe this actually worked. Thanks for the video!

[@jafarsherief]

My one plus three one area was either dead/having ghost touch Saw this video, done the same thing. Instead of all dissembling process I took a lighter used to ignite gas stove. And it worked like a charm Thank you very much 😁😁😁😁😁

[@AllTheGo0dNamesRGone]

Okay guys. I had this issue (with a heavily cracked screen which I assumed would be the cause/end of it). Went out bought a $2 plastic electric BBQ lighter, disassembled it. Secured the 2 wires from the device within 5mm of each other. Opened up notepad with drawing to locate all the areas that didn't work (it was fucking huge) and then went to town on it sparking it, the ark was very obvious between the two wires. Did probably 20-30 clicks across the whole thing (testing the screen occasionally between). THE DAMN THING WORKED PERFECTLY! Not sure what level of magic fuckery this is but I'll be damned. THANK YOU! This saved me $400... well $398 and only took all of 10 mins.

[@lienbijs1205]

Was the fix permanently? Did you do it with bbq lighters because of the higher voltage?

[@AllTheGo0dNamesRGone]

@@lienbijs1205 Nope, was temporary fix. Eventually it got worse, to the point of not being usable. It was a pretty heavily damaged screen. But for the time being this definitely worked.

[@AllTheGo0dNamesRGone]

@@lienbijs1205 I didn't really aim for anything specific for the lighter, just a trigger lighter from a $2 store (not a cigarette lighter).

[@dwaynevictor6857]

omg thank you man I can believe this actually worked need more realistic videos like this

It fixed my Elephone P9000! I applied that 5-6 times and now full screen is working! Thanks a lot!

[@allanerickbacalzo8786]

hi bro, also experiencing it right now with my Elephone P8000, is is still working now? im viewing your comment has been posted 6 days ago

Allan Erick Bacalzo it fixes screen for 4-5 days. now I have to apply it again

No AFAIK

[@shkumbini7]

Man you are the Genie...This is the first time I am thanking someone for proper Genie soution

[@cptnjarhead1]

Its not permanent, but im glad it work for you.

[@kongbullies6709]

@@cptnjarhead1 how long will the trick work based on your experience?

[@maryy1793]

Totally worked for me, and only had to quick 2 times right where you showed and I have LG G2, as well. Phone was completely useless prior, as it had dead zones and stuck on clicking over and over again. Thanks!

[@cptnjarhead1]

Awesome! im glad it worked for you. Its not permanent but its cheap. Sometimes it last hours, days, weeks even months. Good luck!

[@Steve_Mazza]

I tried this a few times, and it cleared the dead zone on my HTC One M8! I don't know why the problem started, and I realize that the fix may be temporary. Still, if there's a chance it will be permanent, or even last for a few months, it is a big help!

[@zubabuba2860]

Xperia z2 Ghosting problem i did this and first time work like a charm. Huge thanks from Ukraine mate

[@divxxx]

You added one year of life to my phone, and still counting... Thank you

[@divxxx]

8 months later still doing great

[@skleenis]

@@divxxxty for the update

[@bobbyb7672]

Man! I cant believe this really worked! I think I may of just fixed my Galaxy S9 Plus! This video should have millions of views!

[@CarterHerrigstad]

I have the same phone. Aight, gonna give this a try

[@y.khangkok2691]

Guys so does it work??? And after few months the dead zone not coming back? please reply thanks, I'm having S9 and the dead zones are troublesome

[@FireVortex720]

@@y.khangkok2691 just tried on s9 plus, it worked!

[@akshitrawat9061]

I SERIOUSLY LOVE YOU BRO!! used the kitchen lighter and now my phone works like a charm!! THANKS A LOT DUDE!!

[@cptnjarhead1]

Glad it worked for you. Its not a permanent fix, but its easy.

[@amitbhalala3660]

akshit rawat hii, how are you ?

[@manavarora9269]

I was about to get the screen replaced. This totally saved the day and money. Thanks

[@swatikhanna2968]

U sure this works.. I facing similar issue with my galaxy s9..the cost of screen is 17k bucks

[@bucki911]

Awesome video, thanks for sharing it. Unfortunately it didn't work on my Motorola Nexus 6. It worked initially but lasted only about half a minute and would never work again.

[@TreDogOfficial]

wow that is amazing! I was literally JUST about to buy a new digitizer, LCD, Screen, with screw drivers and everything but then I came across this video. you have saved me close to $100 for the price of a Bic. THANK YOU

[@akshaysharma8469]

From the bottom of my heart Sir thankyou ❤️

[@Rocketsblazed2thesky]

Amazing!! Fixed the 'phantom' touch on a huawei honor 10 lite. Ripped open a bbq Igniter and zapped the ghost area. Thanks for sharing

[@Ethipriva1]

bro u did it like in the video?

[@Ethipriva1]

Explain please, phantom touch is driving me crazy

[@AndreyMolchanovMANbiker]

It WORKS!!! I've got the absolutely the SAME dead zone on my HTC EVO 3D mobile and it was fixed using this trick! My touch screen works fine now, thank you bro!!!

[@AndreyMolchanovMANbiker]

1 day later it didn't work again. I have repeat this trick, and it works again for... 1-2 hours (in my pocket) and didn't works again. I have done another trick: i use CRT TV screen instead of quartz igniter from a lighter. And it WORKS again. I just brought the smartphone screen to the screen of my working old CRT TV for a few seconds.

[@rucker69]

That's pretty rad. Old school tech for the win.

[@AndreyMolchanovMANbiker]

Another way to make it works: rub the screen (switched on) on synthetic or wool fabric for electrization. Works too.

[@HamzaZia5]

What!? No freakin way, this worked like a charm, in the first try itself. I never thought it would work, this is my 2nd G2 which got the same issue, and i thought it was a goner. Thank you so much man, you rock!

[@cptnjarhead1]

+Hamza Zia Awesome. glad it worked for you. If you still have trouble, try this. Go to your phone dialer and enter the code for you model. 3845#*802# (for International model) 3845#*801# (for T-Mobile) 3845#*800# (for AT&T) 5689#*980# - (for Sprint ) Dial: ##228378 + send (Verizon) Then go to HW device test. Touch Test, then scroll down to Check Synaptics Touch Panel. run that test until each category passes. when you have pass on all 4, leave the phone in that menu for a few minutes. Just set it down and leave it for a bit. I have found that by doing this, you do not need the igniter, but if you exit the menu too quickly, you will get ghost touches. Just stay in the menu for a few minutes. This works on my G2 every time, i will make a video next time this happens. Hope this works for you. If your knock knock stops working, then run the Touch Firmware upgrade in the same HW test menu. That usually solves the knock knock.

[@muzammilhussain8416]

hamza plz give me your contact num or cntct me on this num. i also have g2 320l with same issue. i want to know how did you remove it. 03205500170

[@HamzaZia5]

+Muzammil Hussain just follow the procedure in the video

[@muzammilhussain8416]

+Hamza Zia want to know 2 things that will it work with gas lighter and how long will that work

[@HamzaZia5]

+Muzammil Hussain you will have to take the igniter out of the lighter...no fixed period when it stops working do the procedure again

[@SeikoHolic314]

works on my meizu mx4. i used the ones that are in those mini criket lighters. different ones though coz it doesnt have a wire but i did find a way for it to shock the screen and it worked like a charm. Thank you so much dude. seriously. THANK YOU SO MUCH!!

[@chuchotarantino]

Thank you. This video saved me a lot of money

[@dnust1]

I just used this technique on my ZTE Zmax and it worked. Thanks so much!

[@Trilltendo64]

I was skeptical at first but now I'm able to use my rdx keys now thanks

[@fantasymodelers]

Just worked for me also!! BTW, to get the ingniter out of the lighter, just empty the butane (press knife tip into the filler valve and it'll release or just use it up) and then squeeze the lighter base in a vise until it shatters. Then pick away plastic with your fingers. Easy, 5-minute screen fix.

[@chiroyce72]

I pulled an igniter from an 88 cent candle lighter. It worked flawlessly. I'll keep this handy in case this happens again. I've been dealing with this narrow upper area across the screen not working just like in his video. This works! Thanks

[@cptnjarhead1]

Glad it worked for you. Its not permanent, but its an easy fix.

[@williamwong2004321]

It works for my HTC 10! Thank you so much

[@bolodon2784]

On my blu hd 6.0 after I did screen replacement I had a dead zone. I just tried it once with a powerful igniter and it instantly worked

[@Marko-of5ou]

Thank you !!! I just fixed my Xiaomi redmi note 2 screen with this method.

[@johnisraeldelacruz2080]

Hi man, really? I am using a xiaomi mi 9t pro and i have a problem like this

[@hazi91]

It really works, not just with unresponsive screen, but with ghost touch as well. We'll see how permanent is this solution, but so far so good. You just kickstart back your screen digitizer.

[@gothakane]

Oh my god I revived the dead zone on the top of my HTC 10, I'm so happy!! Thank you so much for this!

[@pityploop3502]

Got the same problem dude my htc 10's upper screen is not working hope this work

[@jamesholley]

My HTC 10 has gone at the top as well. I will give this a go.

[@AladdinSadok]

i bought a second g2 cause the first one really surprised me how good it is. the second one have a dead line and tried your method and it worked. my question is will it cause something bad to the phone after a while ?

[@fastsolution]

you are a life saver man only solution that works!!!!!!!! thanks

[@cptnjarhead1]

Glad it worked for you. Its not permanent, so good luck!

[@fastsolution]

lasted 1.5 days.. dont know why i think its battery problem

[@tesla120]

I first read this in a forum and blew it off as complete BS. But the more I thought about it the less of a crazy idea it became. I'm going to give it a try on my HTC, thanks

[@lzychannel3853]

heyy thats is very very genius idea. thank you for your helping😆

[@slimsketchy1489]

I love you so much man I can't thank you enough....... My HTC 10's upper half started to work now.....

[@shibashou1157]

True? Please respond

[@slimsketchy1489]

@@shibashou1157 1000000% it's working now..... Just put the igniter on the position where the screen is not working.

[@slimsketchy1489]

@@shibashou1157 do you want me to upload a video on it? I made the video when I was doing it.. But I haven't uploaded because i didn't have any intention to do so. If you want I can upload it.

[@shibashou1157]

@@slimsketchy1489 no need bro, thanks for response ☺

[@slimsketchy1489]

@@shibashou1157 no problem bro

[@homermanalansan5214]

Wow, it really works.... Thanks dude

[@gherwelllalican1727]

Got a Razer Phone 2 not more than a month a ago and already experiencing dead zone on the top part of the scree, Will this work on any phone?

[@romarsibunga6884]

Had to do it a couple of times but it works! thanks dude!

[@cptnjarhead1]

Awesome, I'm glad it worked for you. It's not permanent, but its cheap.

[@romarsibunga6884]

+cptnjarhead1 it also fixed an error i had with my zenfone 2. the screen detects something touching it even though there isnt any. its cheap i agree with that. thanks again dude.

[@user-yw9py3dv8s]

it works for my car multimedia. thanks dude

[@fasadua4520]

Афигеть!!! Помогло! Автору видео ОГРОМНАЯ БЛАГОДАРНОСТЬ! Исчезла аналогичная мертвая зона на Samsung Note 5 N920, Спасибо, Дякую, Thank you, Grazie, Merci ....

[@ratziooh]

I had the same problem with my Fairphone 2 and this actually fixed it. What the hell? xD Thank you very much :)

[@PhantomDogman]

It also works agaist ghost touch problem?

[@btraffordphotos]

It worked for ghost touch on my tablet that I've not been able to use for 2 years, I used a stove top lighter it took just a few clicks.

[@candycane9633]

thxs bro worked for me so far

[@eternall808]

LOL I purchased a 2 pack D Match lighter pack from Dollar General and it worked..! Thanks.....

[@cptnjarhead1]

+John Staples glad it worked for you!

[@mukulsoni22]

wow... just wow. yes it works very well. just did it to UMi Touch and now screen is fully working. thanks for excellent tutorial.

[@Adimns]

It worked bro.... thank you so much 😊😊😊

[@gameplayandfun]

Works for me!!!! Thank You!!!

[@Jil1A]

Thank you so much for this. It worked like a charm on my LG G3!

[@cptnjarhead1]

+Jil Amine Awesome! glad it worked for you.

[@Jil1A]

+cptnjarhead1 the problem came back again today and i used the igniter again to fix it.

[@cptnjarhead1]

+Jil Amine Yes, it seems to be a temparary fix, but sometimes it can last weeks, sometime hours. You an also try this - Not sure of the menu options on G3, what you need to do is type the corresponding code into your phone dialer: AT&T: 3845#*850# Sprint: 5689#*990#. T-Mobile: 3845#*851# Verizon Wireless: ##228378 (+ send) International Models: 3845#*855# This will get you into the hidden menu. "On my G2", in the "HW Device Test" menu, then go to the "Touch Test" menu, then find and run "Check Synaptics Touch Panel" until it passes all 4 categories. When you get a pass on all test, do NOT leave the test. Just let it sit for 3-5 minutes. Exit out of the menu and see if your deadzone is gone.

[@Jil1A]

On the G3, there is no Check Synaptics Touch Panel. Is it an automated test or you must try and touch blocks? Can you please post a link to a screenshot to see what it's like. Thanks.

[@cptnjarhead1]

+Jil Amine Sure, but mine is a G2, that test might not exist on the G3.

[@BudiAnto7]

thank you! its work on my s8+ on first try!

[@emi539]

wow lol in first i thought was a joke but when i tried it really worked xD thanks bro

[@robergo19732]

IT WORKS! IT WORKS! IT WORKS! On my Lenovo K3 Note. I had only to remove the protective film...Thanks a lot!

[@cptnjarhead1]

+Robergo Robergo Awesome! I'm glad it worked for you

[@jrponal]

Robergo Robergo hey I'm also using Lenovo but k4. is this a perma fix if not how long till u redo it again?

[@robergo19732]

Jan Rain Onal It is not a permanent fix. It lasts one or two days if you are lucky. at the end I bought a new mobile :-(

[@jrponal]

Robergo Robergo damn that's bad news. Thanks for replying!

[@faizan862]

thanks for your precious time.. really thank you for rplying

[@cptnjarhead1]

+Faizan Ali No problem, hope it works for you! have a great day

[@kmf3014]

Will it happens any thing if spark it on the screen? Will the mother board shocks?

[@Akshanali1]

worked on my s7...good stuff

[@mbardos]

Worked on my Sony Xperia XZ2 Compact too, thanks! I had ghost touches, even more annoying than a dead zone, I think...

[@MikoHecate]

how did it work for u? mine is my phone randomly when i press it nothing happens have to lock and unlock and suddenly it works again

[@mbardos]

@@MikoHecate yes, mine similar, after lock/unlock was working. The zapping fixed it, no more ghost touches, but had to zap it again after a few months, the ghost touches started coming back

[@MarinoNJr]

I have a LG G2 (model D805).After perceiving this issue on my phone, I started to investigate on internet to know if it was a software or hardware problem. In my case, which was pretty similar to this, the stripe of unresponsive touch was at the middle-down part of the screen. After I tried the hidden menu, the restart, the igniter trick, I realize that if a put some pressure with a finger in the earphone hole and another in the top of the phone, vertically I mean, the touchscreen started working fine (sometimes awkwardly). With this idea in mind, I searched for a disassembly tutorial, removed the sim card, opened the back cover, removed the 5 screws of the lower black plastic part with a tiny screwdriver and I found a plug actually unplugged in the exact portion of the phone where I put the pressure. It probably disconnected itself when i removed that lower black plastic part. Well, I found the problem. With caution to not touch the connections directly with my fingers, I started trying to connect the plug. I found out that the plug needs to be with a constant amount of pressure to work properly. So I connect it and put a little piece of paper folded with 4 layers over the connector and screwed back the lower black plastic part. I turned on my phone and the touch was restablished. I'm so happy it worked. I needed buying nothing (ok, I bought the tiny screwdrivers kit). Please, give the phone a try before sending it to the garbage can. The connector I talked about is the one that the guy disconnects in 10:15 of this tutorial watch?v=iih4DRxwfEY (LG G2 Screen, Digitizer, Bezel, LCD replacement, Complete disassembly). I feel the need of assist the people who unluckily got this issue. I hope this comment actually helps someone.

[@ZahirKhan-121]

I m buying this phone so plz tell me that every lg g2 has this issue????

[@MarinoNJr]

+Zahir Khan My girlfriend has one too. Her phone is free from this issue. We bough them together, from the same store. She uses it a lot more than me. So, it's a question of luck, apparently. By the way, my phone is fixed since the day I posted my fix. I never had to open it again.

[@ZahirKhan-121]

I heard that this is best phone in best budget is it lag or slowing as it is 3 years old?

[@cptnjarhead1]

The G2 is a great phone, even by todays standards. Camera, screen and speed is still able to run all task with minimal wait times. The main reason i got a G2 was the battery, 3000mAH makes the G2 hang with the top five phones of today when it comes to battery life. I just bought a Galaxy S7 edge because it has a 3600mAH battery. And i received the gearVR for free! Its a great phone.

[@ZahirKhan-121]

Is there an issue of dead zone in g2?

[@noelchristiansantos755]

IT WORKS!!! THANK YOU!!

[@MyImthebomb]

I used a tazer and its been working well

[@rakshithprakash9858]

I used a kitchen stove lighter and it worked perfectly Thanks

[@cptnjarhead1]

Glad it worked for you.

[@binsonchalumattu8059]

I thought of the same, but it didn't work with me on my Mi Max (2015) phone. Any further suggestions ?

[@musaabdul-qayyum4747]

literally same but it made it worse for me

[@persil3625]

Thanks ! Worked for Lg g3

[@cptnjarhead1]

Glad it worked for you

[@DIYStangsandFreedom]

Nice this work my bros POS Razer 2 phone. Thanks!!!

[@DrFunkenstein1988]

It worked on Mi A1, thanks!

[@johnoliversantiago2165]

didnt work on mine.. lg g3.. the dead spot is on the notification bar. i cant drag the notif bar down. any advice?

[@mostbeautifulfiji4u220]

I don't have that kind of lighter. Anything else I could use instead?

[@zimasadume9526]

I did a factory reset on my G3 now its stuck on the first screen,what do I do in this case ? The screen is not responding at all.

[@143codydrewbieber]

Is this method works when I'm using a tempered glass?

[@joboyjhemfrancisco5914]

Done this still working. Found what was causing deadzones, wearing tight jeans and putting my phone in the pocket eventually squashed the touch screen

[@cptnjarhead1]

Glad its working for you. Good luck!

[@addiegupta]

thanks a lot worked perfectly on my Nexus 5!

[@amitbhalala3660]

Aditya Gupta hii

[@amitbhalala3660]

Aditya Gupta me amit bhalala. baat kar raha hu. kya aapka phone repaire ho gaya ?

[@amitbhalala3660]

Aditya Gupta aapne kaise kiya please muje bataiye .

[@mrkchrstnlgdr]

what else can i use if i dont have an igniter?

[@animalyshorts]

Hi, does it last 24 hours before you have to shock the screen again?

[@harshitsrivastava398]

does using an ignitor solves the problem of dead zones in lg g2 permanently?

[@sidikacolakoglu6048]

I have the same issue on the same location. I will try it. I will let you know after that. Thank you

[@emargento]

what happened this work or not?

[@CCTVReport]

Love u bro its works. I spoused before try this it fake or will not work in my phone becouse my touch issue was different but i was have no option then try this, but this work 100% im much happy

[@Thethirtylife]

I watched your video yesterday did you make a video to show how to take the lighter apart

[@kursatakbulut537]

hahahhaha :D

[@SuperChuna]

Thank you sir! I own you a beer. :)

[@eta3027]

It worked! It really works! The bottom part of my screen stopped working and I couldn't even type. Thank you. I just tried it and it actually worked. Thank you so much!

[@vijaybaswant]

Eta • is it a permanent fix

[@hmemcpy5807]

Holy effin sh!t! I just fixed my wife's HTC 11 using this trick! Her top 15% of the screen was dead, and after two clicks with the igniter it just started working! O M G!

[@zegirdor]

Reminds me of the time when i repaired my mouse wheel stuttering by pressing the wheel digitizer or whatever it is called with a gripper gently and voilah, it saved me from buying a new mouse

[@nospamhelodz]

YOU ARE AMAZING!!!! THX THAT'S WORK

[@cptnjarhead1]

+nospamhelodz Glad it worked for you!

[@kurniaadilaksono809]

thanks alot bro...its worked for my LG G2 VS980 :)

[@cptnjarhead1]

+kurnia adi laksono Awesome!... might not be permanent though If it comes back try this... Try going into the hidden menu for "LG G2" only Go to your phone dialer and enter the code for you model. 3845#*802# (for International model) 3845#*801# (for T-Mobile) 3845#*800# (for AT&T) 5689#*980# - (for Sprint ) Dial: ##228378 + send (Verizon) Then go to HW device test. Touch Test, then scroll down to Check Synaptics Touch Panel. run that test until each category passes. when you have pass on all 4, leave the phone in that menu for a few minutes. Just set it down and leave it for a bit. I have found that by doing this, you do not need the igniter, but if you exit the menu too quickly, you will get ghost touches. Just stay in the menu for a few minutes. This works on my G2 every time, i will make a video next time this happens. Hope this works for you. If your knock knock stops working, then run the Touch Firmware upgrade in the same HW test menu. That usually solves the knock knock.

[@kurniaadilaksono809]

+cptnjarhead1 thanks :)

[@suleman111]

+cptnjarhead1 hello sir, IN vs980 i didnt find the Synaptics Touch Panel test can you please tell me where it actually resides thanks for your great work

[@cptnjarhead1]

+star suleman Hidden menu, HW Device test, Touch Test, scroll down to "Check Synapics Touch Panel"

[@suleman111]

+cptnjarhead1 thanks for your reply but in think there is a difference in every models hidden menu. according to you i haven't found such test "Synaptics Touch Panel" except touch draw test -manual ( which i have followed but didn't succeeded. it would be helpful if you could make a video on it please. thanks for your effort by the way.

[@saad3677]

It worked for me!!! I don't know how but it worked :D

[@sidharthmnair3843]

Thanks bro helpful video

[@iknikblackstone9082]

man ! it worked ! Genius ! Thanks a million for saving me the time and money man !!!

[@TheBladeGuy522]

I don't know if my phone will be damaged after letting the high voltage touch the screen, i need to make sure if my phone will be damaged or not.

[@dombivlibrothers1255]

thanks brother it is working all right

[@cptnjarhead1]

Awesome. Glad it worded for you!

[@lungraspanta6254]

Can This fire ignition fixed for TFT touch screen does not work?

[@Throughalanslens]

Keeps coming back on my iphone xs, any way i can make this more permanent?

[@ibrahimfajar1842]

should i take off the tempered glass?

[@johnbenedictmaningas7727]

Working but only limited time. Any suggestions?

[@janegarcia2780]

does it work with tempered glass?

[@enjouratbu3478]

does this also fix ghost touches?