IH 1086 gets a new Make over

[@mooseguyable]

Out in the barn, covered in dust, There's a tractor that's seen its share of rust. With faded paint and worn-out tires, The IH 1086, it never tires. But now it's time for a new makeover, From old and worn to shiny and sure. With a fresh coat of paint and a brand new shine, The IH 1086, it's looking fine. With wrenches in hand and hearts full of pride, The farmers gather, side by side. They work day and night, with passion and zeal, Restoring the tractor, it's the real deal. With attention to detail and love in their hearts, They breathe new life into this work of art. From engine to seat, every part they renew, The IH 1086, it's as good as new. So here's to the IH 1086, with its new lease on life, A symbol of hard work and dedication, in times of strife. With pride in their eyes and smiles on their faces, The IH 1086, it's ready for new races.

[@TAHDAHFarm]

👍

[@Pennies_on_the_dollar]

The 1086 is looking fantastic!! I would never be able to put a cab kit in, the OCD and wrinkles would get the best of me! I think you did amazing!! Looking fwd to seeing the seat installed, and everything back together!! I like the foam you put in as extra, that should help quite a bit with the noise!! Looking fwd to seeing this tractor in the field soon, when y'all dry up 😳 Thank you sir for bringing us along,look fwd to more!!

[@TAHDAHFarm]

I don't think we will ever dry out, lol. Thanks for being here and commenting.

[@richaust8718]

You can go to hobby lobby or other model/hobby stores and get a testors paint stick to do the silver lettering on the shifter consoles.

[@TAHDAHFarm]

That's a good idea, I haven't done anything to the markings but since I have a silver sharpie, I was just going to use that. Thanks again for your comments and watching.

[@iafarmer]

Looking good! That big piece of foam is definitely a challenge. Will be alot more comfortable to run with all those upgrades 👍

[@TAHDAHFarm]

It smells SO MUCH BETTER. Wow. Thanks for being here and supporting me.

[@stinsonfarms6724]

Coming together. That's a big job!

[@TAHDAHFarm]

It has been worth it but I don't want to do it at time again, lol. Thanks for being here and commenting.

[@FarmallFanatic]

You guys get your tractors all right and I'm ready to buy em

[@TAHDAHFarm]

But it is not for sale, lol. Thanks for being here and commenting.

[@gleanerk]

A lot of work but it’ll be worth it!

[@TAHDAHFarm]

Yes sir, it is nice. Thanks for being here and commenting.

[@farmerpete]

Making good progress! That air ride seat should be nice. I'm lucky, my 1486 came with the factory hydraulic seat, it's fairly comfortable. Maybe you'll inspire me to get an interior kit 🙂

[@TAHDAHFarm]

My main reason was to help with the sound. It is definitely not as load in there. Thanks for being here and commenting.

[@Mark-Marine]

Tim, I could tear it apart - no problemo - BUT I would be lost trying to reassemble it in no time! I don't think even cataloging my disassembly with a ton of phone photos would help put that Humpty Dumpty back together again lol. How you are able to is beyond me.

[@TAHDAHFarm]

I do use the phone camera to help. Thanks again for all your support and commenting.

[@LampleyBrothersFarming]

1086 is looking good.

[@TAHDAHFarm]

Thank you.

[@Thomasfarmstn]

Where did you get the air ride from? Our 5088 has the hydraulic seat. I hope to have it back in 2 months.

[@TAHDAHFarm]

I found them on Zoro.com. it is an A&I set. The same company that John Deere and other dealers go to for after market parts. But they were a lot cheaper. Good luck with your set.

[@404nitro]

That's gonna be just fine when you're all done with the install. Any wrinkles may flatten themselves out once some sun gets to baking it a little. There aren't any of those bristle/brush things to line the shift and range slots in that piece to keep dust out more?

[@TAHDAHFarm]

It look fine and it definitely helped with the sound. Thanks for being here.

[@dehavenfamilyfarm]

You made good progress! Those seats are heavy and awkward to get in the cab.

[@TAHDAHFarm]

My neighbor came over the other day to help me put the set in. There was no way to do that myself. Thanks for being here and supporting.

[@onehappyfarmer3461]

Lots of fun dealing with some of that stuff. I know I couldn’t put that new liner in without 10,000 wrinkles.

[@TAHDAHFarm]

It looks so easy but man did it kick my butt. Itdoes turn out nice. Thanks for being here and commenting.

[@billsauberlich7337]

Have you tried Steiner for parts or All States Ag for used parts,I wonder if someone with a 3D printer could make the plastic piece,probably cost prohibitive

[@TAHDAHFarm]

I tried both of those companies 1st. They did not have one. I went though about 6 salvage yards and came up empty. Thanks again for being here and supporting me.

[@jmooff]

Il avait quoi comme problème ton IH 1086 ??

[@TAHDAHFarm]

It had some electrical problem from mice. In general, it needed a make over from age MD use.

[@jmooff]

@@TAHDAHFarm Ok, and it works well as IH 1086 tractor?? Because I am French and these tractors have never been marketed in France, and I would like to know if the IH 1086 are reliable tractors??