IKEA Kitchen Cabinets | Best IKEA Cabinet Installation Is…

[@silekiernanphotography]

Great job! I love that there is no chit-chat and running commentary.😀You give the right amount of detail to do the job at hand. Very helpful! Thank you!

[@DaruDhillon]

Thanks so much! 😊

[@DaruDhillon]

VIDEOS YOU MAY LIKE: IKEA MAXIMERA DRAWER BUILD + INSTALL: kzbin.info/www/bejne/kJqWn6J9ptKZfac IKEA COUNTERTOP Installation + IKEA SINK: kzbin.info/www/bejne/h6iQiGusYr2SiZY KITCHEN FAUCET Installation: kzbin.info/www/bejne/rpPIipWthpZ_qas If you have any questions on IKEA Kitchens please let me know!👋🏽

[@cameronandrews4061]

Thankyou! Explained the most important part of how to install cabinets; leveling, using correct screws,. Surprisingly this info is missing from a lot of other youtuber's how to do videos.

[@DaruDhillon]

Your welcome! The screws make a big difference.

[@johnpena4592]

Thank you do much for your IKEA Cabinet installation video. I’m planning on installing all new base kitchen cabinets and a pantry. After watching your video, I bought and installed 2 base cabinets and they look great. Thanks to you and your helpful instructions. Now, I’m confident enough to install the rest. Back to IKEA. 😊

[@user-ur9rd5wj1p]

This was great - Perfect video for a beginner with quick steps in the right order to make a quick and easy install!

[@veroandariega]

@Daru Thank you so much for this video! I've watched a lot of videos trying to figure out how to find the high spot of the floor. I didn't understand why it is so important to know where it is until you explained the toe kick placement.

[@DaruDhillon]

Hi Ronnie, thanks for letting me know! I find that knowing the reason can save some time and help out down the road on other projects. Good luck with your install I hope love them too!

[@min_oz14]

you're so good and pro at what you doing

[@spiffybluehippo]

So glad I found your channel! I just finished installing an Ikea base cabinet. The next step is putting on the countertop. Can't wait for your next video!

[@DaruDhillon]

Great job! Glad you found us. Good luck with the rest of your project! Countertops video should be posted tomorrow. ⭐️

[@alexandrakerestegian6103]

I really enjoyed your videos, it made it very easy to put the cabinets together! Now I have to add the hanging rail, not sure how to install it as the wall is concrete....any thoughts/ideas how to due safely, what could be behind it and how do I know that I am not drilling into a pipe or electrical??

[@noonsound4894]

I certainly appreciate a video that's quick to the point but this is insane. 😳😳

[@DaruDhillon]

Too fast! Thanks for the feedback. I’ll be retooling as needed. 👍🏽

[@noonsound4894]

@@DaruDhillon 😁😁

[@conservativeamber1216]

Great Job as Always..Glad I found your Channel

[@DaruDhillon]

Me too Amber, glad you found us! Thanks 😊

[@jonathantromsness1491]

Don't forget to run a level vertically on the studs to see if the wall is level. I installed my uppers and the L cabinet had a 1/2 inch gap between the boxes. I took everything down and had to shim the suspention rail. On one side of the wall my studs were level, on the other side, I had to shim over a 1/4".

[@DaruDhillon]

Thanks Jonathan for sharing your tip! It's always better to take things apart and do it right. You'll never regret doing it right. Like you did. Great job!!

[@jonathantromsness1491]

@bina nocht In many houses the wall is not vertically level which can cause really big gaps in corner "L" cabinets. If you're not installing a corner cabinet then it's not as critical. Put a 4' level on the wall and see how it looks. Check in all the spots that you're going to fasten your cabinet track. If it needs to be shimmed on the top, then put some washers or something behind the track. If it needs a shim on the bottom, you can do this once the cabinet is hung with a shim. Hope that makes sense. If it doesn't, then I suggest getting someone to help you out in person.

[@abdelbenghazi1677]

¹⁰

[@tnahvu]

Quick and to the point. Thank you.

[@DaruDhillon]

Thanks Tuan, for taking the time to let us know! I’m currently working on some more IKEA videos…please subscribe if you’d like to learn more!

[@mikebolt9753]

Clear concise video. Nice job 👌

[@DaruDhillon]

Thanks for watching Michael! Counters are coming next week!

[@mikebolt9753]

@@DaruDhillon I'll be sure to tune into the next video 😎

[@kkbird21]

Thanks for the video and I appreciate your willingness to hear feedback (I concur with the comments about too fast, albeit A+ for just getting to the point!). I'm installing LVP and the floor guys told me to install cabs *first*, which puts my Ikea Knoxhults on concrete slab. I keep getting conflicting info on this (ditto for bathroom vanity). What say you? Also, my cabs have cheap adjuster feet that keep moving on their own accord- any tips on how to make them behave? Thanks again (and I'm jelly of your job- I only get to DIY on my after work hours)!

[@DaruDhillon]

Love the feedback, thanks. I agree cabinets first then floor. If your feet are moving you can try wedging a thin shim under the feet to stop it from moving. Sometime cabinets are installed to sit on a wood frame behind the toe kick too. Securing the cabinet to the wood, wood to wall. It won’t move but a little more work.

[@JL-hn6hi]

Great explanations. Subscribed.

[@DaruDhillon]

Thanks for subscribing JL, I’m glad you found it helpful!

[@shiftseven]

Really helpful videos: thank you

[@DaruDhillon]

Thanks for watching and taking the time to comment. You’ve got this Tom!

[@keska01]

what screws did you use to tie the cabinets together ?

[@waynekey7419]

Thanks for sharing! What type and size of screws did you use to attach adjacent cabinets? I appreciate the detailed tips and video edits to make this a quick view.

[@DaruDhillon]

Hi Wayne, please check out the description box for the screw sizes. They are seriously awesome. Thanks for watching! I hope you enjoy your kitchen!! 👋🏽

[@ChristopherShawnPike]

Great video. Is this an edit down version from a full video?

[@DaruDhillon]

Hi Chris, thanks! This is the full video on cabinets. We also have a video on IKEA countertops and sink. Is there another part of an IKEA Kitchen build that you would like to see? We appreciate your feedback and can add more if that would be helpful!

[@pennifold]

Thanks for the quick edit - was getting board of watching people slowly tighten screws! How did you get it on its legs without breaking them?

[@DaruDhillon]

Thanks, it actually really easy to install the legs. They simply push in. Once you adjust them they will firmly stay in place and are designed to carry a lot of weight. If they pop out while you are moving your cabinets, not a big deal at all, just push them back in place. Good luck with your install Pennifold. They are great kitchens. I hope you love yours!

[@eartherinfire]

What screws did you use to attach the cabinets together? The washer head cabinet screws look like they were used in the anchors. Did your cabinet screws come with the cabinets?

[@noodles806]

Clear and concise - love it! How did you know the bottom of the suspension rail should be 32 3/16” from the floor?

[@DaruDhillon]

Thanks Jeremy! I’ve installed a lot of IKEA Kitchens over the last ten yeas. I follow IKEA recommendations for all installations.

[@noodles806]

@@DaruDhillon OMG - we’ve been waiting to install our kitchen for so long that I forgot about those instructions! We just finished putting our cabinets together - time for the rail! Appreciate you taking the time to reply!

[@DaruDhillon]

@@noodles806 I know the feeling, I’m sure you have a lot in the go. Good luck with your installation!

[@stevevavagiakis5165]

The backing of those base cabinets is so flimsy, especially when you need to cut out for the plumbing. I'm thinking of replacing it with sturdier plywood. What do you do?

[@DaruDhillon]

I haven't had any issues for kitchen cabinets. For closets I reinforce the back with a strip on wood on the back to hold it in.

[@linnns7104]

I'm installing a small cabinet with minimal tools and this will be really helpful, thanks! Except how did you cut down the rail? Would a hand saw be sufficient?

[@DaruDhillon]

I’ve used a hacksaw in the past for cutting the rail. A handsaw with a blade for metal will work. It’s faster to cut halfway through on one side, then flip the rail over to finish your cut. It will weaken the metal faster. You can bend it too to speed it along. Good luck! Thanks, I’m glad you found it helpful!

[@idntknwwhtname2use]

my floor is pretty uneven... could I use the mid point of my slope? Can the front legs be shorter than the height specified... and then go to higher on the other end?

[@DaruDhillon]

It’s best to go from the high point to avoid problems with your countertops not lining up with your stove. They should be at the same height. Also it will allow for clearance if you have a dishwasher. Appliances have legs that can be always be adjusted to make them higher. I work in older homes with uneven floors too and it’s the safer option to go from the high point. If your floors are terribly uneven , you should double check your countertop height around your kitchen to make sure you’ll be at the correct height for your stove. Good luck David 👍🏽

[@SuperAcp3]

which cabinet screws did you use to join the cabinets together?

[@PhoBoDacBiet]

1:46 I used #10 3inch wood screws that you're showing here.. am I in trouble? They dont seem bend the ikea washer though, or slip through the gap. Would I potentially mess up/loosen the screw hole in the wood if I replace the wood screws with the washer head screws? What if I sized up and used #14 instead of #10 for the new screws?

[@DaruDhillon]

You’re good to go. Not to worry! I’m a huge fan of cabinet screws and structural screws because the holding power is impressive. Congrats on building your own kitchen that’s awesome!

[@lmercer]

Great job. I see you measured the rail from your finished floors. If I am installing on concrete which is the unfinished floor do I then add the size of my underlayment and LVP?

[@DaruDhillon]

Thanks Imercer! I would do just that. Add the thickness of your floor + underlayment. So your dishwasher and appliances will fit and line up with your countertops. Thanks for the great question! ⭐️

[@aasifchaudry8835]

loool your skill range is impressive. Doing all the stuff without even tying the hair up. Impressive... but as other people have called it; Can still follow with the joys of rewind/pause etc. and all the good detail and shots are there, but your editing is a pretty cray cray in this one! Sometimes better to do a smooth re-take from the top - (the mid-sentence chops can be jarring to watch.)

[@DaruDhillon]

Thanks for watching Aasif and for taking the time to share your recommendations! I’m looking to hire an editor starting this summer because I’m not the best editor. I promise to tone down the cray!😄

[@xiaojies6953]

I think i need to pay ppl come to my house to do this, lol

[@lynnb2562]

At what point is my home considered newer Construction? Our house was built in 2000

[@DaruDhillon]

Hi Lynn, your home should be built 16” on center. I would consider your home newer construction but there’s no hard rule on that. Good question, thanks.

[@lynnb2562]

@@DaruDhillon thank you!

[@lukabegu8376]

Thank you

[@DaruDhillon]

Hi Luka, hope your project is going well!

[@edmiller5576]

We are installing our own kitchen cabinets. Do I raise the bottom of the lower cabinets to match the height of the floor? I want to be able to get the dishwasher in and out easily.

[@DaruDhillon]

Hi Ed, the measurement in the video is the height that IKEA recommends measured up from your finished floor. That distance will allow clearance for your dishwasher and so that your countertop lines up with your stove.

[@jamesnicol9810]

In the process of installing an ikea kitchen and my opinion is that if you have an older house then the rail system with make your work harder. Also ikea does not give room for plumbing so will need a lot of hacking if your services run on the wall. If your walls are not plumb and wishing to use 200/220 units then you may find it difficult to make all units level. I can go on and on but long story short. Ikea was not the best choice for our upgrade.

[@DaruDhillon]

Thanks for sharing your struggles James it may help someone in a similar situation. If your walls are in rough shape that can involve a lot of shimming, starting with the high point in your wall. But that can be a bit of a headache lining them all up to match. When running pipes in front of your drywall, I have installed my rail built out on a 2X4s. I extended the depth of the countertop a few inches to allow for the plumbing. Appreciate your feedback James. Hope you were able to find a solution.

[@jerrycho9869]

i hope you fired your video editor. they cut you off at the end. sooner than i can press the like button.

[@DaruDhillon]

I’ve changed editors now. Always listening to feedback like yours and making improvements. Thanks for letting me know.

[@raynash4748]

WOW.... who did the choppy editing??

[@DaruDhillon]

That’s me. Thanks for the feedback! We’re listening and making adjustments along the way.

[@jaylii2696]

The editing is excellent. Short quick and to the point. No one wants to watch a 5hour install video

[@DaruDhillon]

@@jaylii2696 thanks for the support Jay! I’ve slowed down our latest videos a touch. It’s still to the point.

[@christopherdasconio8022]

WTF doesn’t anyone show WTF you put the screws in the sides to hold them together. This is the sixth video I’ve watched, and nobody shows where to put the screws to connect the cabinets together.

[@DaruDhillon]

@@christopherdasconio8022 you choose a hole that doesn’t interfere with a hinge or drawer glide. One near the bottom, top and middle. I don’t count them out. I don’t think any installer would. If you do that’s cool.

[@gabemarzsin3841]

Be prepared for lots of headaches... from an experienced cabinet installer.

[@DaruDhillon]

What was your experience like Gabe? Any issues? I’ve installed a lot of IKEA kitchens over the years. I’ve been happy with the results. IKEA cabinet installation is opposite to traditional cabinet installation. Starting bottom first so it could be an adjustment if your used to installing different cabinets.

[@Eastvanucks]

Punjabi 👌🏽👌🏽👌🏽🔥🔥🔥

[@DaruDhillon]

🙏🏽💕

[@yudel3899]

Nice video but speaking too fast for me 😢

[@DaruDhillon]

Thanks Yude, I appreciate the feedback. I’ve changed the pacing on my new videos. I hope you check them out. 👍🏽

[@ישראלמסאס]

את יכולה להאט את הקצב בהגדרות

[@arthurtazo9840]

Is there anyway to hide those hideous cheap looking legs?

[@DaruDhillon]

Absolutely. They are meant to covered with the IKEA plinth. It’s a white flat profile toe kick that clips onto the legs. Everything is completely hidden the finished look is great!

[@noskyimo319]

I barely understood anything she said

[@DaruDhillon]

Subtitles are also available if you require them.

[@pallecla]

Slow down.....

[@DaruDhillon]

Noted. Thanks for letting me know! 👍🏽