IKEA PLATSA Wardrobe Assembly/PLATSA Frames:Part:1

IKEA PLATSA Wardrobe Assembly this is part one where I will show you how to put together Ikea Platsa wardrobe there are 3 bigger Platsa wardrobe frames and 3 smaller top Ikea Platsa frames I will show you in detail how to assemble both Platsa wardrobe frames so you do not need Ikea Platsa wardrobe assembly instructions. Assembly of Ikea Platsa modular storage system is simple and part one you will be able to complete without any tools. Good luck with Ikea Platsa assembly let me know in the comments how it goes. Next part two will show you how in done Platsa drawers, Platsa doors and hanging rails with shelves. Let me know your experience with this Ikea wardrobe. I would say this Ikea wardrobe assembly easier than Ikea pax wardrobes.
ONLINE SUPPORT:
Here you can get extra online support if you having a problem with assembling your Ikea furniture. Online support one to one video call will be available to Patreon supporters and all funds will go directly back to the channel helping buy better equipment enable me to spend more time to continue creating more Ikea furniture assembly tutorials. Thank you for your support.
/ ppflatpack
All this assembly of Ikea PLATSA wardrobe is in 4 parts and here are the links
PART:2
IKEA PLATSA assembly/ interiors/PLATSA doors/PLATSA drawers
• IKEA PLATSA Wardrobe A...
PART:3
Joining Ikea PLATSA wardrobe frames
• IKEA PLATSA Wardrobe A...
PART:4
IKEA PLATSA Wardrobe wall mounting/PLATSA doors adjustment
• IKEA PLATSA Wardrobe w...
**Tools I'm using **
Small electric screwdriver
amzn.to/2AYddCK
Bigger drill and screwdriver all in one
amzn.to/2RJMJiP
For more tools for furniture assembly or general DIY adventures.
www.amazon.co....
Here is my stuff :
www.ppflatpack....
[e-mail]
/ ppflatpacklondon
/ ppflatpack
/ ppflatpack
/ ppflatpack

[@aloe9179]

We havent even started building ours yet because I wanted to watch your video again. Thank you so much! Your explanation is wonderful and you've saved us a lot of time and stress :) Thank you!

[@PPFlatPack]

Glad to help. Thank you for watching

[@Jovane2707]

Thank you we just built 9 of these today we couldn’t figure out getting in the back-board. Thanks for the help :)

[@angelicacombi9089]

Thanks to the video and clear instructions, we managed to assemble our Platsa unit in a blaze! Don't know how long it will last, but that's a different story! 😛

[@IlanaGalWaizer]

Wow, I don't know how you did this- I watched the video yesterday for the back board and I was able to do it. Today I had the closet of 180 cm and couldn't get it to go in the line. Watched you video again and it went through like aa charm. Thanks!

[@PPFlatPack]

Glad it worked for you. Thank you for watching

[@barbarybar]

Thanks for this. Makes it easier than using the instructions.

[@PPFlatPack]

Thank you for watching

[@nullnull4381]

Thanks a lot, great explanation!

[@DonKJB]

Really like this new series. 🛇 nails. Easy assembly. The joints come together more like old school carpentry. Seems a lot more steady than pax.

[@PPFlatPack]

Yes easy to put hem together. Thank you for watching

[@The2follow]

Really good to put together solid but easy to take apart if you need to

[@Tephnos]

Really? The hollowfibre frames seem more stable that PAX? The frame construction seems similar to BESTA to me, which on the taller frames the sides would bow out making door attaching a bit haphazard.

[@adriftinaboat3452]

Thanks for taking the time to share.

[@PPFlatPack]

Thank you for watching

[@maximotto8947]

This is honestly an awesome video! Something like to go ask a friend who did it before.

[@PPFlatPack]

Thank you for watching

[@ex0ja]

Thank you! I got stuck with the back, in the instructions it looks like you insert it still folded, your video showed to straighten/flatten it first!

[@bajumbel3468]

Danke für deine Videos. Vorab sehr hilfreich.

[@SovereignThrone]

Video still holds up, thanks!

[@ewhite18]

Excellent video PP Flatpack, thank you. I agree you should be on IKEA's payroll

[@PPFlatPack]

Agree ;)

[@clayusmcvet2242]

Can't wait to do one of these, I hate the pax.... Your the man brother

[@emiris15]

Hi, can you tell me why you hate the pax? I'm looking for wardrobe and was looking at it.👀

[@Tephnos]

@@emiris15 Agreed, curious on why the PAX hate. PAX is solid particleboard and this is more hollow like BESTA.

[@stasiacoban7555]

I’m about to assemble one of those tomorrow. Thank you very much for clear instructions!

[@poltronafrau]

On one side mine doesn't have the keyhole thing to slide the other shelf into. It's just a round hole so nothing aligns.

[@senolgonul8034]

Nice video with very detailed explanation. I'd like to know how to disassemble the plastic fittings those are used to fix back panel to the frame. Can someone describe how to do it?

[@J4Tears]

Thanks bro you’re the best

[@intimno_no]

Мерсибо ❤

[@alfredalfredo5080]

Great video 💕💕💕💕💕💕💕

[@IONHowTo]

Thanks really useful video!

[@FabianKreutzerSound]

Nice video, mate. And really helpful. Thank you 🙏

[@rokopraznik7966]

Thank you

[@duc9139]

well tutorial video

[@nazmakhatunofficial]

Hi thank you for this - can you tell me how to dismantle a platsa - I clipped on together and it was incorrect - how do I dismantle it

[@GopalKaranam]

Really great video. My room height is only 5 cms more than the height of the frame. How can I put the back panel? Is it possible to build the unit vertically like PAX? Thanks

[@Ceevee22]

Thank you for helping us with our storage! Really helpful for the backboard part

[@PPFlatPack]

Thank you for watching

[@User24feb2012]

Fantastic explanation, but I’ve rushed and put the back side with white colour on outside , and I put the plugs in already😭 how to get the plugs out pls to turn the back panel?

[@samellis1055]

You might be able to use a flat head screwdriver to lever up the inside pin first, then pull out the outside plug.

[@mariadankova9033]

Great series, thank you. From your perspective is this system significantly worse than PAX? It fits better in my space, but not sure if it is not a waste of money and it will disintegrate quickly from a daily use. Any thoughts would be much appreciated.

[@PPFlatPack]

I would go for Pax. Structure and all build is sturdier and what I see significantly more people ordering Pax system competing to PLATSA.

[@foxfou]

Thanks for your videos. I'm about to construct one of these next week. One question: which size you use for the connecting screws hold the furniture together ?

[@ArturDZGN]

Any idea or suggestions on how you can close the side gap between the closet and the wall?

[@chris46214]

it is not supposed to, it can easily build mould

[@stephenlivesey1]

Is it possible to swing the doors what ever way u want. Thanks

[@gerardfoster5116]

What size is the wardrobe unit you used. Thanks

[@seannovak9733]

Is it necessary to put the feet on, i havent put any feet

[@PPFlatPack]

Without feet the bottom drawers or doors may touch the floor

[@drnadaalshazly]

I’m having hard time disassembling this very same frame, do you have any tips?

[@MrGillThomas]

Ever think about using folding tables to build on?

[@PPFlatPack]

One day One day when I will do these videos in my studio. Usually, I work in small spaces. But it is a good idea definitely would save my knees can feel them after long day.

[@anikocarlo]

Is it possible to disassemble this?

[@PPFlatPack]

Yes

[@H.Furniture]

good job , Why throw away the catalog this way ?

[@petertr2000]

And if the room isn't twice the size of the unit, how the FUCK do you put the back on?

[@rdrrr]

I'm two years late but the backboard is flexible so stick it against the wall and bending the board line up the ends, then feed it in.