IKEA PLATSA Wardrobe Assembly/PLATSA interiors/PLATSA doors/PLATSA drawers / Part:2

[@KennethBDone]

The trick with the bottom layer is just what i needed. Thanks!

[@PPFlatPack]

Thank you for watching

[@ina.lionxx397]

Thanks for all the Good videos of the Platsa wardrobe. It helped me a lot !!

[@PPFlatPack]

Thank you for watching

[@moonlightdusksky]

Thank you so much for these videos. So helpful as our Ikea instructions were even more sparce so no idea how I'd have done it otherwise. Electric screwdriver was a lifesaver

[@PPFlatPack]

Thank you for watching

[@nullnull4381]

Great video, thanks a lot!

[@PPFlatPack]

Thank you for watching

[@younanorthman]

I can not for the life of me go past step 1 and 1 on the drawers - putting those metal brackets together. I spent 45min on it before I gave up, and I have 8 more to go ... any tip? was it really so easy for you? I've been building (and loving) IKEA furniture since I was little so I'm in shock...

[@saraho4289]

im at exactly the same point

[@joergm9273]

After spending 1h on this drawer driving me nuts: The only way I could me it work was to attach large tapes - because the frist 3 parts of the drawers are so instable that they all fall apart when inserting the bottom. The only way was using tape. Later I would lean one side to the wall when inserting the bottom.

[@dominikajolantad]

Are you placing the part with the rollers in the right direction? If you flip it so that the "pocket" in the bottom can fit the slided wall of the drawer, it should work.

[@moonlightdusksky]

@@joergm9273 Replying in case anyone reads in the future. The trick with the draws is that the the bottom part of the draw that slides in is ever so slightly longer on one side so you have to make sure you are sliding it in the right way (eg it's slightly rectangle and wider than it is longer) or the clips will never click into place. Someone had marked our ones with a pen to suggest they slide in that way but we only spotted this after spending forvever trying to figure out the first one that wouldn't click in!

[@blueroom1007]

Very instructive, thank you!

[@azukimochipan]

Hello! Thank you for the awesome video! Do you happen to have the name of the hanging rail in this video?

[@cherie7725]

This is really helpful, thank you. I haven't seen the plastic drawer front mechanisms before. I'm interested in buying a PLATSA dresser second hand and replacing the drawer fronts. Would it be difficult to remove the plastic piece that attaches it and reuse it?

[@PPFlatPack]

Can replace or change all doors or drawer fronts same as interiors similar to pax system same measurements for old and new frames.

[@cherie7725]

@@PPFlatPack Thank you :)

[@radidconstruction7902]

Nic work

[@allytaylor4164]

Amazing thank you! I did all my drawers wrong 😢. Any idea how to remove plastic so I can change to bottom line please 😊

[@rocklivesonforever1990]

Hi did you find out how to remove plastic as I have have made same mistake 😅

[@goldfarmerfx]

How many ikea hjälpa soft closing hinges per door? I heard you can use both standard and soft, but its not clear how maany and what placement

[@MrSmid888]

Very well edited sir. It’ll take you longer to film and edit than to build!! I’ve been building this stuff it’s pretty easy, I glue most of my stuff also. I’m just browsing other combinations. All the best 🏴󠁧󠁢󠁳󠁣󠁴󠁿✌🏻

[@PPFlatPack]

You right one 10-15min video take around 20-25hours to film edit and post. Thank you for watching

[@pliantimpala7858]

The little clips at 2:40 would NOT go in, they put up a huge fight and barley wiggled in.

[@maudbijldevroe3164]

Hi! I did something wrong while assembling the drawers, but already clicked the white plastic bit in place. I'm trying to unclick it now, but not having any luck. Do you have any advice?

[@pascalemeyer9381]

Hi. Thank you for your videos, I love them. I have a queation: do you have an advice how the shelves can be removed again? We would like to change the position of the shelf but it's stuck very strongly to the cubboard/frame. Thank you & best regards!

[@wenqing89]

Helpful thanks. The clothes rail is different now.. Can't put the clothes rail at highest due to need to use the hole for door.

[@PPFlatPack]

Oh yes need to do update on PLATZA system. Thank you for watching

[@marhensa]

how did you do?? it seems so easy in 2:35??? i tried it with anything but it wont move / snug. edit: nevermind, I found the way. I use screwdriver and wrap it with cloth or something, and hammer it down to snug that thing.

[@alla7572]

Same problem, it won't move an inch and the surface of the drawer front is so delicate it started to come of from all the nudging.

[@dominicmurphy8142]

Thanks!

[@hill16upthedubs]

great video, would that be straight forward to disassemble? just for moving house etc... just looking to buy more storage.

[@PPFlatPack]

Yes easy to dismantle and reassemble similar to pax.

[@victorvogels643]

Top

[@leceyluna3050]

Hi, thank you for sharing this video. Can you please share with us the dimension of this wardrobe (height, width and length)

[@PPFlatPack]

Sorry don’t have access to this wardrobe anymore

[@DonKJB]

Really like the new drawer and shelving system. Super fast!!! Also, it seems that you're doubling up your work by not mounting to the wall before attaching the doors. Did you for the purpose of demonstration/experience with new product? Thanks..

[@PPFlatPack]

You right parts where is super easy I speed up there is not much to explain. Yes I wanted to do wall fixing at last for demonstration this video was recorded over 2days. Usually I fix frames to the wall first. I liked the new way they did shelves and drawers and frames finally something refreshing after long years of Pax wardrobes.

[@DonKJB]

@@PPFlatPack thought so..

[@megan_beveridge]

We need two 80cm frames to fit the space we have so we were looking at Platsa over Pax. However the quality of the drawers seems really low. Cheap runners and no soft close. Interested to know your opinion. I think we're gonna go with Metod and Maximera instead (even if it's for a wardrobe).

[@PPFlatPack]

You right regarding drawers would be nice if they did soft closing should be the standard in 2020 I guess is the price. Regarding Metod units I like them and if the price is not issue go for it.

[@megan_beveridge]

@@PPFlatPack thanks for your reply. I think long-term Metod is the better choice. The drawers are really nice and they open all the way.

[@Fugitive292]

Agree with you. I was ready to order Platsa but decided to visit IKEA and see them myself. Indeed the quality seems low and overall has a more cheaper look. I'll go with PAX I guess.

[@ChemicalViruS004]

Platsa is like a budget alternative to PAX for the price we can't expect a lot from it. My mom has a pax for years holding on pretty good. I wanted the platsa cuz allows me to make a kind of a bridge in between closets giving me a place where I can put an office table in between them yet allowing me to have some place where I can storage extra stuff above the office table. Unfortunately PAX system doesn't allow such things :/ I think pax is a lot more sturdy and probably will hold longer than platsa

[@megan_beveridge]

@@ChemicalViruS004 went with Metod in the and very happy. Used some filler pieces and made it all look built in. So far holding up to the use by two small kids (even if they admit they've stood on a drawer 🙄).

[@psysya]

still thinking of getting this or pax

[@PPFlatPack]

Personally I would go for pax

[@НуржанСапабеков-м3с]

👍👍👍👍👍👍

[@thechip2727]

ur so cute.

[@PPFlatPack]

;)

[@Kearz.]

Great Video, but you should have mentioned you dont need to take the doors of this is just something you decided to do. this caused me loads of pain!

[@KingPAZmma]

Thx for this hint. 🙏 kzbin.info/www/bejne/jJyWgoywjd6Jl8k I thought, i am stupid or they send me the wrong stuff. 😅