Implementing and Troubleshooting Site-to-Site VPN

Working towards your CCIE Security Lab certification? Would you like to learn how VPN works? Would you want to learn how to troubleshoot VPN issues? If so, join INE instructor Rohit Pardasani for an interactive session on site-to-site VPN. Follow along with Rohit and learn how to configure site-to-site VPN on Cisco IOS-XE and Cisco ASA firewall. You will learn how to configure and troubleshoot site-to-site VPN. You will learn the configuration difference between IKEv1 and IKEv2. Familiarity with VPN is advised, but not required to join this session.

[@shalinkaravadia6447]

One of the Best Video on Internet for Site-to-Site VPN Configuration as well as troubleshooting. Understood each and every thing in detail and helped me the clear the concepts more better way.

[@christostz03]

Great tutorial !!!! Very explanative !!!

[@princerajsingh4838]

Need IKEV2 explanation in the same way...this one was also pretty awesome

[@joyantadebnath2797]

It is the best tutorial for ipsec vpn❤😊

[@laptoplifestyletutor679]

This was one of the best diagnostic videos I've ever watched I am a subscriber for life thank you

[@puneetgupta5967]

Very well explained! Clear voice clear concepts and everything to the point.

[@Gattsu1986]

Excellent video and breakdown, I learnt a lot from this one, thank you kindly sir 👍🏻👍🏻👌🏻👌🏻🙏🏻🙏🏻

[@Pankaj268hp]

There are many tutorials from many guys on KZbin, but ony few of them have a clear vision to explain in that way that how much it would be difficult but they make things easy at the end of their tutorials, thats one of you Rohit sir. Thank you very much to share it on a open platform. Wish you a happy new year, stay blesses.

[@anshusinha2378]

One of the best troubleshooting and von explanation video. Thank you

[@kevinacosta19]

I love the way you explain everything. Very nice video. Thank you so much.

[@geoffreyonyedikachi5923]

The six-steps concept made it easier to understand.

[@ashfaquddin4925]

Really very good explanation.. Thanks Rohit.

[@mmrana99]

fantastic webinar, Thank you Rohit

[@mohanrajaj3]

amazing teaching sir i understood a lot better than books

[@myohannes3036]

Excellent Video clear and concise explanation

[@stiven988]

Thanks for sharing, your webinar was really helpful and clear

[@ravindrapinge2431]

Great explanation with example...

[@radhakrishan2418]

This was really excellent video & thanks so much.

[@kayengvang342]

very well explained! Always follow your video. 5 STARS!!

[@cairocruz3615]

Very well explained!! Thank you so much for this!!

[@Mrherox982]

Wonderful explanation Man.. Like the way you teach

[@rockinron5113]

Great video. Thanks.

[@TJ-tt1ck]

Got things very clear! Thank you so much!

[@hcetc]

Good job. Thanks Rohit.

[@mayurhabbu7361]

great video !! detailed troubleshooting steps

[@paulthangbawi]

Simply the best, you earned my subscription!

[@sameralnassr8239]

Great Video, just what I needed, thanks a lot.

[@aravindk.r7949]

Very well explained sir👏🏼

[@kronos1505]

Great video!

[@sureshchand1308]

Today I realize how easy was it...... thanks a lot

[@edmundjohnhofmannjr]

Great Job - I learned allot.

[@ashishsolanki86]

Hi Rohit, This is very helpful thanks for this webinar. What will be the use of having a NAT in between our S2S tunnel and what changes we have to make on our side to get this scenario working. TIA

[@familysharifs2692]

Very pretty explained.

[@sehunoh8688]

Very useful thanks so much

[@Mrherox982]

Many many thanks

[@yilaksergualem5632]

really highly impressive and interesting

[@shivendrasinhmore9995]

Excellent

[@csoengg2749]

Nice way of tshoot... In step by step approach 👌🏼

[@khurshidkhandy6622]

Thanks Rohit.

[@rahulnamdev5985]

one word...awesome

[@golus4963]

Thanking u, i have learnt a lot.

[@sonarsan]

One question. How do you enable "logg buffered debug" while making sure that your ASA CPU spike doesn't kill a production device? Is there any way to reduce a logs queue beside configuring "no logging message xxxx" statements?

[@fairplay8347]

Outstanding

[@vishal5210]

Very useful

[@anilkpat]

You are gear sir.

[@sandhyakandwal4696]

amazing :-)

[@rahulnamdev5985]

Super sir

[@hariprasad-uw2yn]

Sir, When I upgraded the ASA 5525-X from 9.12 to 9.14 I got Phase 2 issue in L2L vpn. When compare the backup config before and after upgrade shows "set pfs group14" group14 missing after upgrade. Even after applied group14, VPN not come up. Finally I reverted it to 9.12. please help me with the solution.

[@veerabsc]

Hello Rohit, thanks for the videos, i have issue with my ASA S2S tunnel is up, one side ASA(SITE-A)encap is packet but not decap the packet, I have checked other side ASA(SITE-B) encaps and decaps happening here and also default route pointing towards ISP. But why cant i ping SITE-A to SITE-B vice versa?

[@hasan135]

Please share IKEV2 explanation in the same way.

[@sswaminathan9840]

HI Sir, in our site there is ASA FW which is has a IPSec tunnel built from it to a remote customer site which has fortigate FW. The tunnel is up and working fine from long time, but recently we have added one entry in the crypto map interesting traffic ACL as one new subnet has been added at our end and same has been allowed in tunnel ACL. But while doing sh crypto ipsec sa im not seeing anything for that particular ACL entry but the forward traffic is reaching ASA and not getting into the tunnel, even routing is also in place. Can you please check and help

[@jaytebib4053]

This dud is a beast, I had to go X1.75 speed tho

[@RajivKumar-ee7xv]

Are ASA and router IKEV1 debug messages same. I need to learn debug on ASA please

[@samadkv]

Hi Dear, I would like to know what is the motivation behind you to pass all 5 Cisco CCIE Exams!!?

[@robinrose9126]

Thanks bro ! Can some one reply me the 6 steps of implementing site to site vpn ?

[@networkfreddy2000]

"I have about 5 CCIES" Goals lol

[@gustavoythalo6031]

funciona whatsap?

[@martinsalvesroberto]

Edmundo...Foi pouco, muito pouco. O nosso time é 10 vezes melhor que essa ...

[@cammycam45]

I don't know why you teach tshooting via debug. If you came into my environment and ran a debug I would ask you to leave immediately! This is not something you run on real world mission critical networks. Next time howabout showing how to tshoot via the show commands.

[@r.duraipandi3809]

Excellent