Improving the shot count on the Airmaks Katran

[@Tim_Bassett]

A nice simple upgrade with great results. Another clear video…..great stuff

[@sub12airgunners]

Cheers Tim, 130 shots from such a small rifle isn't that bad. Thanks for watching.

[@paranormalyacine2500]

@@sub12airgunners where can I purchase one for my katran LB hp 5.5 please?

[@lukeatkinson30]

Where could I purchase one of these reducers please

[@philangel4273]

Jim & Sam offered me one and fitted it and one of you rotating sidelever handles in anodized blue to go with my blue laminate Katran that I picked up from Crawley Surplus yesterday, thanks for making such clever little bits of kit!

[@sub12airgunners]

No problem, you wont be disappointing with the Katran, quickly becoming one of my favorite rifles. Thanks for watching.

[@stevekemp7718]

Increased the shot count on my Katran B by a massive amount, plus the increase in power was also greatly increased, reduced the hammer spring to bring the rifle back to sub 12 ft lbs, The fitting took about 2 minutes to do , the hammer spring adjustment was simple to do using a chronograph to check the reduction in power , this is a brilliant piece of kit,I would highly recommend the fitting to your Katran

[@sub12airgunners]

Good to know, such a simple thing glad to hear it worked out for you. Thanks for watching

[@paranormalyacine2500]

How did you get it?

[@markhomer5704]

Great mod , love watching the tech stuff , beats the hell out of coronation street that's for sure .. keep the vids coming ..

[@sub12airgunners]

Thanks much appreciated. Thanks for watching.

[@samdaley1443]

Hi there, great video! Can you possibly tell me where I can purchase one these restrictors for the TP?

[@bartoszpajak2285]

Simple and effective! Great job! I really like the concept of this rifle, including it’s mechanics with the pivoting hammer. I’m considering buying one since the HW100 laminate I’m shooting is great for bench rest but a bit front heavy and bulky for freehand shooting in the fields.

[@sub12airgunners]

definitely give it a look, very light, point able and great for field work. Thanks for watching.

[@bashm5767]

Amazing increase in Shot counts, Great video guys👍🏼👍🏼👍🏼

[@sub12airgunners]

Thanks, much appreciated, thanks for watching

[@elninoairguns2793]

Sir good day what is the common hole for transfer fort cal 22 thanks sir watching from philippines.

[@khamishusain]

Thanks for sharing. Excellent simple and straightforward.

[@lukeatkinson30]

Have you made the transfer port restrictor your self. Got a katran yesterday in full length haven't had a chance to test it out yet but that will be something to look out for

[@jaytee8188]

What a simple yet clever mod, well done. 👍

[@sub12airgunners]

Cheers, works a treat. Thanks for watching.

[@janrobertbos]

NICE!!! Greetz from the Netherlands!

[@sub12airgunners]

Thanks for watching

[@markwood-kt2dw]

Hi where can I get one of these port restrictors for my sub 12 katran.177 Thanks Mark

[@RatSpetsnaz]

Just ordered this rifle on the back of your videos from ron daley air guns via CDR suppliers. Will the newer Katrans have the port plug fitted and if not do you sell these. Brilliant videos always a pleasure to see an expert at work

[@sub12airgunners]

These are great little guns i think they come with them now 😀

[@RatSpetsnaz]

Thankyou very much for the reply. Love your channel..a mine of information. Cheers again💯👍

[@chrisfigueroa3361]

Awesome wow that's great work figure out stuff like that 👍thanks for sharing bsafe buddy

[@sub12airgunners]

Thanks, much appreciated.

[@facatube]

Hello. This update is only effective for sub12pf? For a 17 foot pound which increase of shoot may l expect? Purchasing link please

[@andydowden8117]

👍I need more shots out of my fx Dreamline tac compact bottle any suggestions I’m getting about 80shots out of 300 cc bottle … what do you think about a 17 .cc power plenum!

[@sub12airgunners]

That sounds very low for a 300cc bottle, have you tried re-balancing the hammer spring? turn the power wheel down on the side and see if the power drops, if it doesn't you can wind some hammer spring tension off and you should get a few more shots. The power plenum won't really effect your shot count, you may get a couple more just because of the increase in air volume but it will be minimal at best. Thanks for watching.

[@rafimax11]

any option to buy this nice load lever ? that standard one is ugly

[@studssmith2008]

Hi buddy , would you be interested in working on a delta wolf , need some screws put in the picattiny rail at front of gun to hold the barrel in place , I’ve just done 1 from the top at the moment and it’s made a fantastic improvement, , let me know if you could , many thanks studs

[@sub12airgunners]

Thanks for the interest but we can't work on other peoples rifles. thanks for watching.

[@stevencordery3608]

Brilliant and simple. Suits me. Easy to follow and no bs. Nice little upgrade. Does this work well for .177 and .22? Seeing how easy the barrel comes out, in theory my long barrel could easily be swapped for a standard length. Are the spare barrels and shrouds available?

[@sub12airgunners]

Thanks, I see no reason why not for .22 sub12, you can swap the barrels very easily although you will need the pellet probe for your caliber obviously, I believe you can get the shrouds from the UK Importer Chris over at CDR guns. Thanks for watching.

[@nephtalilucero8084]

Can it be converted to bottle?

[@petergajdosech404]

Excelent work , perfekt video and comment. THX .

[@leevespa4564]

What do you think of the gun?

[@grahamgeorge1130]

Hi can you get a larger cylinder for this Katran c

[@sub12airgunners]

yes i believe you can get the L cylinder the one in the vid is the compact

[@grahamtooley6782]

Are these available to buy now? Have a katran L looking for one of these.

[@sub12airgunners]

we don't sell them but your suppler might have one 😀

[@TheSniperno99]

what power did you set it to in .177 mate ? as mine has started jetting i have been told its using up far to much air

[@sub12airgunners]

Hi, we set the power to 710 fps with 10.34

[@blackops.bowhunter559]

that is a beautiful rifle.

[@jesusgonzales3226]

how much and where's the link to buy product please . hello from California.

[@sub12airgunners]

You can get them from Utah airguns, link below. utahairguns.com/airmaks/

[@paranormalyacine2500]

Not found.

[@andydowden8117]

👍

[@jeffhello1444]

Nice job 👌

[@sub12airgunners]

Thanks for watching.

[@lisawood516]

😁😁 Very Clever.

[@josefernando5193]

Like friends

[@1001space]

can I buy a puck yet follow you on Facebook please let me know

[@sub12airgunners]

sorry Haven't got any at the moment