IMTS 2022 FULL Video Tour! CNC Machines, Tooling, Workholding & More!

[@mkemachineinc.8058]

Love the Okuma guy's comment "I'll buy anything you're selling as long as it comes with an operator."

[@EVOMAN14]

Good programmer setter operators are gold dust at the moment 😎

[@rgetso]

The Okuma and Hermle machines are so nice! Speedio earns its name!

[@BavariaCNC]

Thanks for sharing!!! I love the Häberle Axis on the robofdrill at 1:55:14

[@MachinistJohn]

Running my mills all day, finally got through the whole video. Thanks again Saunders

[@nyccnc]

:)

[@burningdieselproduction5498]

As people have mentioned earlier - we all have been waiting for your IMTS video. Otherwise IMTS without NYC CNC didn't happen. The stuff from HERMLE is just SICK!

[@TheDandyMann]

It sure was, got a free Oktoberfest beer from them 😁

[@jimdean7335]

Many years ago I worked in field service for GE CNC, prior to the deal with Fanuc. Always wanted to go to IMTS but never made it. Watching your video shows me what I’ve missed. Thanks.

[@weyers17]

Love Okuma and their new technology. Crazy cool!

[@brutusyt2842]

Good in depth video, good information. Head and shoulders above all other youtuber IMTS2022 content thus far.

[@SuperstarComponentsLTD]

I’ve been waiting for a decent imts report 👍

[@rtrottier14]

Thanks for showing at least some of the small stuff. From someone who is just starting out, the machines you've grown into are so out of my realm of possibility currently that its nice to see some things that are more relative to what I do.

[@jimsvideos7201]

Props to a guy who is both the president of a meaningful company and still happy to climb into one of the machines at a show.

[@joncaliguri4469]

Great video as usual!

[@Max_Marz]

A dream since highschool come true this year, it was awesome running into you!

[@mohammedraheemuddin7002]

IMTS 2024 is going to be LIT!

[@warrior69fox]

My first full time job in the machining trade was working for Data Flute running Anca and Rollomatic grinding machines! Was a great introduction to the trade and gave me a serious in depth perspective on cutting tools, specialty tools, and what is possible to make or later on in my career able to have made.

[@PM.al.whatmough]

Thanks for labeling the sections of the videos

[@AnthonyGriz]

Awesome video, thanks for sharing John!

[@alirezabehnodfar672]

The best IMTS tourist .Thank you JOHN

[@168mfg_ShawnNelson]

Great report, we were so busy in our booth I did not see any of the show. Missed you by 10 feet when you were at Noga.

[@tobigforyou]

Always loves seeing Hermle.

[@floxmfpv5295]

Awsome video so far... about making a plan before attending imts.... Well I didn't make one, thinking it will be fine... OMG I completely underestimated the scale of AMB (the German equivalent to IMTS). I think I spent around 3 hours just in the first hall. However there were ten others to go... to sum it up, I ended up, running out of time. But still, it was awesome. Also this was the first trade show for me... definitely overwhelming to say the least. John please keep up the great work and awesome videos.

[@craigm712]

9:50, CAS by Okuma is not related to CAMPLETE or other of the shelf collision simulation. This is an in house software developed and maintained by Okuma. We have had this software for over 15 years and it is amazing once you are proficient with it. Compared to other offerings out there, the user has a lot of power to add their own models and even update them in the middle of a program.

[@iltubal]

Content here is always super interesting even inspiring...it's a struggle though when the audio is a challenge. Keep it up NYC CNC you're awesome. !

[@edmundzadurian8908]

Amazing Machines ❤

[@robertross7028]

Awesome! Thank you! Watched the entire video!!

[@fix.make.play.]

Aww, no Mazak?! Some new stuff in their booth this year. Why skip Mazak?

[@AwesomeProjects20]

Thank you for showing the Penta Co. I was looking for information on the new machine. There is no update yet on their website.

[@harezy]

Willemin guy knew his stuff. Not often I say that and he was in MM not Inch. One sexy machine 🧡

[@CJAbraham]

Jim is the man

[@jacobbotden5641]

There is 7 of those Robodrill Plus K with the carousel a couple towns away from Grimsmo

[@PetterStetter]

Great tour. The sound is not good though. Some noise filtering even in post-production would've helped a lot.

[@wrighty338]

Hermle impressive as always, but Brother also impress with their speedio's

[@TheDandyMann]

Seriously, i was blown away by videos but once I saw them in person it was amazing the speed those brothers have.

[@joemccarthy1991]

Stoked to see you show Devon and Phil. I loved the video of 1186 mfg. I signed up for the DSI summit and can’t wait. I hope I can get to meet y’all.

[@SimonPEdwards63]

Thank you for this John. I hoped to attend in person but was unable.

[@BuildItAnyway]

Looking good!

[@95dodgev10]

Coincidentally we just worked with DSI on a fusion 360 custom post. I think i even spoke with Devon.

[@minjamedia333]

Great tour. Please use some Zoom audio recorder with Lavalier microphone or something else. Audio is really bad.

[@derekcapron5718]

Our current CEO is on a Hermle buying spree. We got the C650 and C400 a year ago and are probably getting one more of each within the year. Always love your IMTS videos, John.

[@mattiasarvidsson8522]

and I respect that first sales guy for being down to earth, and realistic .. I like his attitude ..on the level of what the machines are.. others I've seen are going on bragging like its a 5 million dollar machine for a fleamarket price..

[@bcbloc02]

Crazy to think what all it took just to set up for that show.

[@thesignspecialist1067]

awesome!

[@BrilliantDesignOnline]

Incredible.

[@Mr.King-1983]

I saw you up at the Okuma booth ✌️

[@MarkPuglia]

Why no coverage of Mazak?

[@Rimrock300]

there are hundreds of companies, too much to cover, think he focus on the companies he and friends are most familiar with

[@ERxWASTEDx]

Did you by chance swing by the Modig Machine booth and check out the inverted millturn center they have?

[@lokmanguneysu2705]

Gayet başarılı bir çekim

[@MrZmm95]

guy at 9:47 made my day

[@Jonnywoods_049]

I think the Williman was the coolest. I hope that guy from yamazen didn’t tell everybody a speedio has 35 hp 😂 great coverage john 👍🏻

[@kisspeteristvan]

seems like a very focused tour . But it's still good .

[@elluisito000]

I was there and it was awesome 😀

[@Rawspeedgarage]

Great video, unfortunately the audio sounds like it had been recorded with a patato

[@honda86tb]

I’m like Wade. Started on horizontals then many different vertical but never got to work on a Bridgeport. Instead went to Okuma lathes and then Holroyd flute machines

[@chrisstavro4698]

Great coverage. I just wish you'd used a mic. I was straining to hear them speaking over the din.

[@ddutton0]

I miss read this and thought wait you are with Bob from ILTMS.

[@Ddk90]

No Mazak? ☹️

[@edwalker7400]

Very Cool

[@iltubal]

so glad to at least virtually visit IMTS again as indusry-economy picks up again. greT VIDEO but low audio - loud noise need refinement. GREAT overall though

[@mattiasarvidsson8522]

the sub spindle still have extremly slow travel on the new haas lathes?

[@doubledarefan]

I was waiting for you to cross paths with Abom79, but I missed that part. Anyone who caught it, timestamp, please. I watched Abom79's IMTS vids, but missed him meeting you. Did not know until I read the comments on those videos.

[@colonialroofingofnorthcaro441]

Was he talking about Charlotte NC, and has that already happened

[@stephengalvan1487]

Any one have the IG for that CJ guy holding 5micron true position? Curious to see his processes and work

[@bastardthread1317]

Iam also looking for him.

[@CJAbraham]

@cj.abraham

[@brettbernhardt7608]

What's going on in the background of 1:55:48

[@Rimrock300]

Carousel with pallets for different work holding tools, possible with raw material attached

[@TheDestroyer1250]

Pierson Workholding didn't have a booth?

[@RobbieWhits]

My man! Go Bills @ 40:30

[@YoDaPro]

What happened to the audio quality? It literally sounds like failed active noise canceling.

[@MadisonsMunitions-mx6rm]

IMTS next month. You should have gone by Mazak.

[@KnoxKaram]

Why did ya skip Mazak?

[@SimonPEdwards63]

I had hoped you visited the Kitamura booth but alas no.

[@dreamcat4]

who was that guy with the 5 micron tolerances? the audio was so bad i couldn't hear his name

[@macroliko]

No doosan? why man!?

[@85CEKR]

Ha they get too much coverage on titan's channel.

[@greenbuttonpusher_hc6453]

Nice one (Brother...what few influencers can do...) But all those axis...one day, they will come back to bite you. :D :)

[@joesephrodrigues]

whoa, Bre Pettis, havent seen him since Makerbot.

[@brianmcbrinn7564]

What’s cj’s company name? (With the two willemins )

[@Rimrock300]

Search for CJ abraham willemin

[@GetBlitzified]

John, please fix your microphone :)

[@saundersmachineworks]

Agree. That whole video setup was sold after this trade show - been replaced with better camera (and mic)!

[@chestervaldes7551]

Ok, good, already answered.

[@Rimrock300]

It's not the official NYC CNC that replayed here, no grey field around the channel name. Could easily be taken for a impersonator account. Can be John even though. Fair enough answer. But in general, look out if such unofficial channel accounts sends link, contact info wanting you to get in thouch or something.

[@nyccnc]

@@Rimrock300 FWIW, yes, it was me (john) that replied. Our mic / setup (for whatever reason) stunk on this trip; it used to be "fine". So got some solid new gear for the next tour video!

[@Rimrock300]

@@nyccnc I had a good feeling about that. Thanks for a great channel, keep it coming)

[@coltonmorris7958]

Whaaaaaaat? No GROB machines?

[@PreciStrike_96]

@1:42:24

[@Jay-wq4qr]

Is Hermle now producing for Ukraine?

[@Rimrock300]

Hermle sells their products worldwide

[@williammahone7830]

rookie, no background noise cancellation!

[@bh3141]

Haas is so screwed. Everyone is going to automation because of lack of decent employees and Haas doesn't have a reputation for reliable lights-out machines. Serves them right for what Gene did to Fadal back in the day.

[@ALampkin52]

Fairly new in the machine tool world.... what did he do?

[@julianwatts9024]

Lol if you think it’s lack of decent employees boy are you in for a rude awakening when it’s your job that’s replaced soon enough.

[@jonjon3829]

why are people so obsessed with hermle?

[@Rimrock300]

Are they? Hermle is one among several German and Japanese top end brands.

[@alfa0mega74]

sound is terrible :(((

[@life.is.to.short1414]

What. You were there too.. dam. This us a long video. Should of cut I in different parts

[@jackb8208]

Username checks out

[@ryanrosser8520]

Okuma what in the heck is with your programming and support? These "LAP" cycles are a joke and the OD and ID grinder canned cycles are way too complicated. Your control panels need standardized. Stop changing things. Find something that works and stick with it.

[@tryingtolearnthis]

The sound is terrible

[@BillyMildred-k2x]

Thomas Michelle Robinson Karen Thompson Matthew

[@HoneyDooley-g5n]

Smith Helen Clark Kenneth Hall Linda

[@BartonSebastiane-p8p]

Young Edward Anderson Thomas Hall Jeffrey

[@WalkerMarlon-v6d]

Anderson Paul Miller Mary Walker Helen

[@DefoeBrian-x9m]

Robinson Barbara Young Cynthia Young Linda

[@AnDy-of3mj]

Sound is terrible. Such a shame.

[@joshuaorange8290]

No stupid bingo card this year? I always thought that was ironic from a guy that makes fixture plates for living chiding the rest of the industry for lack of innovation.

[@RalfSRobotRalf]

Unwatchable with bad sound. Sorry.