Host Phil Godeck and Henkel Engineer, Andrew Paluch, demonstrate how to properly apply LOCTITE® anaerobic threadlockers to achieve maximum benefits. LOCTITE® Anaerobic Threadlockers: na.henkel-adhesives.com/indust...
Пікірлер: 207
@SkillBuilder4 жыл бұрын
In rust we trust. God's own threadlocker
@thedude89763 жыл бұрын
Until the truck disappeared into a pile of road treatment induced rust. Up here in New England nothing lasts anymore and they still shithouse every storm..ABSOLUTELY terrible
@miamiwax55043 жыл бұрын
🤣🤣🤣
@cristianarvizu83292 жыл бұрын
Lmaoo
@yourmom7052 жыл бұрын
Yes
@joshoconnor9666 Жыл бұрын
I was just going to say all I learned way use rust as a thread locker
@lizandrocampos83953 жыл бұрын
All I wanted to learn was how to apply this so my kitchen faucet handle doesn't loosen up and these two made this a lot of fun to watch.
@terryzak17425 ай бұрын
I never thought of using Loctite Blue to prevent corrosion between fasteners! What a brilliant idea.
@rcs30305 жыл бұрын
Not much to learn here. I was looking for a tutorial on the different types of "Locktite" and their applications.
@VernNorrgard3 жыл бұрын
I learnt how to destroy a desk with overzealous ratcheting
@zybch2 жыл бұрын
I learnt that using Locktite does the OPPOSITE of whats its advertised as doing. I want the damn thing to LOCK TOGETHER tightly, not allow more easy opening!
@RuhulAmin-vn4ij3 жыл бұрын
the clamp coming off at the end was genius and funny
@prairiepatriot21622 жыл бұрын
Great concise and informative video, thank you.
@nomadicwolf61322 жыл бұрын
Us unlearned millennials & generation Z kids need these videos. Very entertaining and informative! Great video! Thank you!
@hhjhj393Ай бұрын
I mean every product should have demos of their use and how they work. IDEALLY we would even know what chemicals are in the product and what's going on at a chemical level, but it's reasonable that companies don't want to go and give away their secret recipe.
@micksbiggestfan40067 ай бұрын
Exactly what I was looking for. Thanks 😊👍There is a video on the project farm channel that "Likers" of this video might find useful.
@SoItGoes19856 ай бұрын
Good job. Kudos to the media staff.
@paradise3562 жыл бұрын
Woo! thanks for the info, it was helpful!
@AimGobalWorldBibleSchool5 ай бұрын
Good Job man! ... just bought one...
@LordMcMPA4 жыл бұрын
When a sales guy does something with an engineer - the engineer at some point or another usually gets a good laugh out of the typical sales guy's "over the top"-goofiness. In this clip to be witnessed at 3:01
@Driftmotion15 жыл бұрын
From watching this video I learned that without Loctite on a rusty bolt you will likely ruin the fastener, your socket wrench, and the table that the test fixture was attached to. Thus proving that Loctite will save you a lot of money!
@manuelvazquez87584 жыл бұрын
Oil is cheaper.
@enricofermi67 Жыл бұрын
@@manuelvazquez8758 So is water, but it won't hold the fasteners together against motion such as vibration.
@mrcarrepairman Жыл бұрын
In a way i get a flashback from the Police Squad! series, Mr. Olson and Det. Frank Drebin 😂😂
@FixItPleaseJ4 жыл бұрын
@Loctite North America First off, I love LOKTITE Blue 242. It does a phenomenal of job holding fasteners were I put them, even when there are ridiculous vibration loads trying to shake everything apart. I can take it apart later with just a little bit of extra grunt, and not a torch. It is very challenging for people who know how and when something works to explain it to someone who doesn't. I think you were trying to let it show for itself, but clearly you could make a video to show where and when to use it. Most people don't actually read instructions, and even fewer will call the 800 number. He should have said, " Loc-Tite blue is made to increase the initial holding torque of a fastener, and as a side benefit, since it keeps the threads clean, the torque to break it free will be same, even if the fastener is exposed to harsh elements. You won't need an eight foot breaker bar, or a torch, to take off that rusty 1/2 inch bolt, even if the bolt is underneath your snow plow." A top down view of a Beam torque wrench, with slow motion at break point would have been very effective and everyone loves slow-mo. An graphical overlay of of the breaking torque would demonstrate how much difference it makes. @Gary Anderson Think of Blue LokTite 242, as a drop of glue to keep the nut from vibrating off when you don't want it to, but still breakable enough to take it off when you do. Blue is the most practical for most uses since you don't need a torch to break it loose. There are other products that prevent rusting threads such as anti-seize with copper, aluminum, nickel, graphite, or teflon, if you only want to prevent the threads from seizing up.
@riskinhos2 жыл бұрын
I can't take it off. something is wrong
@voiderez45092 жыл бұрын
I'm a 243 guy myself
@vincentlok8894 Жыл бұрын
242 or 243? The video shows 243, is 242 another similar product or is this a typo? EDIT: OK, I looked it up. So 242 is the older threadlocker. Loctite says 243 is an updated version and it's a touch stronger, but more importantly it is oil resistant. So according to the guy who's website I read, with 242, yes, you should clean the threads to get grease and oil off...with 243, you don't need to (though go a head and do it to be thorough). So do some research and decide which to use and whether you need to clean it or not. So maybe that's why they didn't clean it in the video?
@elliottsalt Жыл бұрын
Stopped the screws from falling out the bottom of my 12 year old MacBook Pro. Great stuff.
@ohjesushesaiditagain.67483 жыл бұрын
The moment I seen people the white jackets I knew I was listening to experts in their field...
@DeadRingerMachine2 жыл бұрын
I find it VERY interesting they don’t to tell us that you should first clean your threads - or whatever - with alcohol or some kind of solvent (and let it fully dry before applying the Loctite, of course - I debated whether or not to add that, but this is KZbin, so of course I need to add it). This is going to remove any oil or grease or anti-corrosive agent that might be on the surface (stuff like that is quite likely to be on nuts, bolts and screws, right? The answer is YES, it’s quite likely). Any of that crud will cause Loctite to fail miserably in its purpose. And let the Loctite cure before using the machine or item - that means at least 24 hours of inactivity but of course it all depends on temperature, humidity, blah blah blah. Yeah. So you came here to get good info from a video, but you had to read the comments to get anything really worthwhile, eh?
@nordicpride9708 Жыл бұрын
If I recall all strengths of Loctite have differing set times. Pretty sure BLUE is 4 hrs but might want to confirm. If it’s torqued to spec I don’t see the need to go to the full cure point in my applications
@loctiteNA Жыл бұрын
We are happy to assist with your product & technical questions. We need additional information to ensure we are providing the best answer, so please feel free to contact our Technical Experts at Contact Us - Henkel Adhesives (henkel-adhesives.com)
@hughmungusdong480310 ай бұрын
@@loctiteNA is what the original commenter said true??
@michaelg68902 жыл бұрын
Cross-threading is nature's threadlocker.
@Dastardly_X2 жыл бұрын
🤓
@permafrost__2 жыл бұрын
Thank you LOCTITE® :)
@ericstorm46135 жыл бұрын
No table was harmed during the making of this video.
@dwade33 жыл бұрын
Uses all his strength on the rust nut "Wow pretty ease" lmao 🤣
@XxJaguar222 жыл бұрын
Too be fair, there wasn’t any penetrating fluid, breaker bar, or impact wrench used… so in my world, that seems pretty easy 😂
@TURTLEORIGINAL3 жыл бұрын
Wearing lab coats add true authenticity!👍
@will1luv14 жыл бұрын
Do they sell tubes of rust? I'll take a case please!
@johnnyaraujo35134 жыл бұрын
Can it be use on mini split AC refrigerant lines?
@viplavchhabra903 жыл бұрын
Very nice
@Zuubeecom3 жыл бұрын
Thank you.
@saravanang22722 жыл бұрын
Loctite 204 how do apply in the thread?
@fculs4 жыл бұрын
can i use loctite 5400 as a sealant on a hydraulic hose joint
@jenniferwhite60896 жыл бұрын
you have something on 660 loclite
@ThePackDad2 жыл бұрын
When using 242 on bicycle screws, do you need to use a primer or something to prevent seizing like with Park Tool's AP-1?
@duckacid2 жыл бұрын
AP-1 is only required for Carbon, but Park Tool sucks at being clear about it.
@Mentorcase5 жыл бұрын
They look like stainless bolts, with stainless and brass fasteners you should use an activator like lockquick in a spray can.
@Alias10554 жыл бұрын
whos table was that?lol I use it its great!
@gromkour53412 жыл бұрын
So it stops it from loosening on its own but we can still tighten and loosen it ourselves after?
@pjn2001 Жыл бұрын
Yes
@solarsynapse2 ай бұрын
With VC-3. With regular locker, it would need to be reapplied, if moved.
@DS_painting Жыл бұрын
Is is possible to remove LOCTITE 243 residue from painted surface? I used Loctite 243 for the screws to attach black painted bar ends weights to the handlebars of my motorcycle. Unfortunately, I had some Loctite residue on my hands during assembly, which left some ugly fingerprints on the shiny black paint of the new bar end weights. Is it possible to remove the loctite residue from the bar end weights somehow without damaging the paint? Maybe with chemicals, heat or buffing?
@loctiteNA11 ай бұрын
We suggest using alcohol to remove Loctite 243. For additional resources please feel free to contact our Technical Experts at Contact Us - Henkel Adhesives (henkel-adhesives.com)
@jasoncrawford14894 жыл бұрын
Pierce the tip? I have a small tube of Loctite 242. I'd love to apply it to some threads, but as hard as I squeeze the tube, nothing comes out. I look at it with a magnifying glass and don't see a hole at the tip. I don't see it mentioned anywhere, but are we supposed to find a pin and pierce the tip? Or snip the tip off?
@joenunya84492 жыл бұрын
I have had blue set up in the nozzle. You can unscrew the cap and use a wooden toothpick to clean it out and it should flow better.
@adammcguinness99502 жыл бұрын
I just wanted to know how to open it!😂 Mine is all in Chinese or something like that. Cheers. I was thinking I had to cut some off or put a pin in there. I never would of thought to pull it. Very cool design.😊👍🏼 I use mine to put my pocket knives back together.
@kellismith43292 ай бұрын
There are so many others though the orange loctite, and the green wicking grade one
@scottbush5 жыл бұрын
What product should I use on a metal screw that will touch plastic (screw goes into metal but will pass through the plastic shell of a ski boot)?
@loctiteNA5 жыл бұрын
Dear Scott, please call 1-800-LOCTITE Option 1 to discuss with an engineer. Thank you!
@mancaveedc75963 жыл бұрын
Wow that was so easy to takeoff when I have it in a vice grip using a torque wrench
@falcon7593 жыл бұрын
If the thread is "locked," of course it's going to require some force to remove. That simply means the thread-locker was doing its job. Obviously in real-life applications, a bolt that size is going to be in something fairly substantial and won't require a vice-grip to loosen. They were just using a loose nut and bolt for demonstration purposes. Also, he was using a fairly small ratchet (not a torque wrench, which should only be used for tightening, not loosening) which is a perfectly normal and common tool for loosening nuts/bolts (other options would be a breaker bar, combo wrench, or adjustable wrench).
@BOMBON18710 ай бұрын
I dont understand why doesn't the color of the liquid match the bottle.
@hamidizadi10 ай бұрын
If I use a low strength loctite like 222 instead of silver or copper anti-seize would it affect a fasteners torque specification.
@loctiteNA10 ай бұрын
We are happy to assist with your product & technical questions. We need additional information to ensure we are providing the best answer, so please feel free to contact our Technical Experts at Support center | Henkel Adhesives (henkel-adhesives.com)
@sanjhaigopinath4 жыл бұрын
Oil from my oil drain pan is leaking from the drain bolt which Loctite should I use ?
@newfie-dean58034 жыл бұрын
Use Teflon tape!
@edmor10864 жыл бұрын
You're probably missing your copper washer
@dablet4 жыл бұрын
what's the difference between this 243 and 242???
@BrettJamesSuperRoach3 жыл бұрын
243 is oil resistant
@solarsynapse3 жыл бұрын
Is there a product that can wick into where an inner and outer race of a sleeve/bushing bearing come together? It is a one-way type "bearing" that I want to lock so it is bidirectional. I have considered welding it.
@jff987jl2 жыл бұрын
Green loctite
@solarsynapse2 жыл бұрын
@@jff987jl Which green? Do you have a number? Thanks.
@jff987jl2 жыл бұрын
609 ….for press fit applications
@jff987jl2 жыл бұрын
Loctite 609 is a low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to 0.005" in diameter. Adds up to 3,000 psi holding power.
@Saaaaab3 жыл бұрын
Can you use this to pre-threadlock bolts a few days before you use them?
@prs3143 жыл бұрын
That depends on the specific product. Some activate after metal contact, so those would not be ideal to pre-apply.
@joenunya84492 жыл бұрын
You can buy bolts with it pre-applied. They call it thread locker patch. It usually has the same color as the loctite. The liquid in the bottle kind is usually not good once it is broken loose though.
@DSC8003 жыл бұрын
Does Loctite threadlocker spoil? I mean, if it's a few years old but comes out liquid, it's still effective? Thanks.
@solarsynapse2 жыл бұрын
They should have answered this. I don't know the official answer, but from my experience, as long as it has not set and is still liquid, it is still good.
@joenunya84492 жыл бұрын
Easy enough to test the blue. Shake it up, apply to a screw and see if it sets with twenty minutes.
@tnig6 жыл бұрын
Does this work on split rims alloy wheels?
@loctiteNA6 жыл бұрын
Hi Ahmed, thank you for your question! In order to give you our best suggestion for your project, please contact our tech team at 800-562-8483 or email Tech.services@henkel.com. Thank you!
@brenthawkins2042 жыл бұрын
Loctie 648 green has no solvent to remove ..just alot of heat. What would be a good replacement that could be removed by solvent or less heat. My gear is on an electrical motor shaft. Stainless shaft and aluminium gear with keyway. Worried about the high heat to remove 648. A solvent would be great to use everytime i need to replace the motor. The gear is protected from water in a gearbox but does have lucas red n tacky in it. Please help our comunity of people with the problem. A torch is the only way right now.
@joenunya84492 жыл бұрын
Call the 800 number.
@stevenjosephs911 ай бұрын
Can you use Red Loctite 243 on brass nuts & bolts ??? 😮
@loctiteNA11 ай бұрын
We are happy to assist with your product & technical questions. Please feel free to contact our Technical Experts at Contact Us - Henkel Adhesives (henkel-adhesives.com)
@DeliberateNRandom3 жыл бұрын
"Oh, Andrew is tall! Pan up! Not enough room! Zoom out!"
@davidgruen74235 жыл бұрын
I remember people were arguing with me whether putting blue loctite on wheel lug nuts or bolts, would prevent it from coming off next time, they tell me you can’t take it off if you put loctite on it, lmao, I mean what boggles me is that people who argued with me already knows the difference between the red and the blue one and they used blue loctite on many parts on a regular basis but when it comes to something that doesn’t usually require loctite, they can’t think straight.
@martind3495 жыл бұрын
Good God what fool would think to argue with so concise and informative a man. More about the purple loctite s'il vous plait.
@solarsynapse2 жыл бұрын
Does the torque spec change on lug bolts with threadlock or antiseize? Dry torque vs wet torque.
@davidgruen74232 ай бұрын
@@solarsynapsenot by a significant amount
@gauravswarankar25574 жыл бұрын
i want to stick my laptop base, is this best adhesive??
@bldjln31584 жыл бұрын
No, try super glue instead.
@dennis83092 жыл бұрын
@2:21 Pushes as hard as he could, then says "That's actually pretty easy"...lol
@profile12515 жыл бұрын
In Russia Loctite tightens you
@augustxiii25804 жыл бұрын
Its all good.
@josephliptak4 жыл бұрын
Trust me, Don't use the red loctite if you plan on removing a nut from a bolt with tools. Always use the blue loctite. A lot less cussing with blue.
@RaffyMaBoi2 жыл бұрын
I thought red needs heat to loosen the adhesive
@JDougyJ2 жыл бұрын
Where am I supposed to buy 243 at? Everything on Amazon is knockoff
@JadeGeminiM39011 ай бұрын
I heard for knife pivots that there are fewer metal ions transferring that can cause Loctite to stay uncured. I think in this video that part was not touched on very heavily is the importance of the ion transfer to act as an activator. Something like a stainless, dlc coatied, or titanium has less ion transfer. But, what you can do is after you clean the pivot and screws with isopropyl alcohol. You can put the Loctite directly on a copper penny to start that ion process as an activator. You can mix it around and then place the blue Loctite on your pivot screw and dial in your knife action and let it dry for over 24 hours and bang… You’ve got an action that won’t come loose.
@Roland_Deschain_2 жыл бұрын
"the nut engagement area" :)
@daviddibble2879 Жыл бұрын
How long does it take to cure??
@Cuandoman8 ай бұрын
Look up the TDS
@Devo19875 жыл бұрын
Can I use on water pump bolts ?
@southport974 жыл бұрын
Yes. Only use the blue (medium strength) and cover all the threads for a little insurance from rust, oil and wear. A word of caution: Do NOT use the red locker (maximum strength) which would be overkill for a water pump and would make a future replacement costly and frustrating.
@rfreitas32984 жыл бұрын
Yeah, a lot of experts... rust locked bolts may snap its head or break and you end scraping a part or having to machine a new thread...
@jaked9642 жыл бұрын
Well if you’re not a citizen of tard town, most people would know that when the bolt/nut gets tight on the rusty threads, you tighten it back down a few threads and begin re-loosening the bolt as a repeated process. Cleaning the rusted threads on the way off. Or you can just use the retard strength and no brain and snap the bolt/nut off without that process.
@rfreitas32982 жыл бұрын
@@jaked964 IF, and only if, you are able to tighten it back to get it loose... get a drop of the wicking thread locker and have a happy life
@robertfacundo68662 жыл бұрын
RIP Table
@davidbraucht5444 жыл бұрын
This video just made loctite look like eazy off. I was here to research cure time, and overall dry time not to convince myself that loctite is designed to loc things tight but be easy to remove a bolt and nut it was used on? This video is very oxymoronic.
@soli.deo.gloria3 жыл бұрын
243 is removable, stays on until you need to remove with hand tools.
@MatthewNugentmonty543 жыл бұрын
It keeps things 'locked' until you need them, and doesn't require a blowtorch to remove them like stronger loctites do (like say a wheel lug. It would keep them connected, but would still allow it to be removed with just hand tools and the inside wouldn't be as prone to rusting)
@trisho63952 жыл бұрын
How do you poke a hole in the tube??????
@trisho63952 жыл бұрын
I have the permanent red and there is no pulling up!!!
@CreachterZ Жыл бұрын
Wait. Mine is 242. Is that one worse?
@loctiteNA Жыл бұрын
Each product was designed to fit different needs. We are happy to assist with your product & technical questions. We need additional information to ensure we are providing the best answer, so please feel free to contact our Technical Experts at Contact Us - Henkel Adhesives (henkel-adhesives.com)
@miamiwax55043 жыл бұрын
"Nut engagement area" 🤣
@Friedrich-Wilhelm-19805 жыл бұрын
i like to use red all the time blue just seems to do nothing
@manuelvazquez87584 жыл бұрын
It appears by this video that blue locktite makes it easier to take things apart?
@exiledwolfch2 жыл бұрын
@@manuelvazquez8758 I use the blue one when I upgrade any laptop for my customers , laptop screws tends to unscrew itself . It is helpful and also to avoid corrosion
@ammar-28236 жыл бұрын
Dry time ?
@loctiteNA6 жыл бұрын
Hello! Since different Threadlockers have different cure times, I recommend contacting us at 800-562-8483 or email Tech.services@henkel.com so we can give you a more specific answer and recommendation. Thank you.
@FixItPleaseJ4 жыл бұрын
less than five minutes for blue.
@haraldkoch97173 жыл бұрын
You people are funny
@kristianvendramin2 жыл бұрын
Loxeal THE BEST
@50willienieves4 жыл бұрын
Question I just use lock tight on my motorcycle exhaust now I was trying to take it out to to put the exhaust to the right angle and my nuts strip out now I can’t take the out
@furonable4 жыл бұрын
I thought I was putting it on wrong for some reason lol
@ma10coll3 жыл бұрын
probably coulda re-shot this one fellas
@tongbunsing3 жыл бұрын
What's different between 245 and 265?
@ozziejim84723 жыл бұрын
20!
@colinwatts43203 жыл бұрын
This video is 95% of the way to being in Dr. Steve Brule territory
@andrewjarvis7777 Жыл бұрын
FORYOUR HEALTH
@chieflouie28213 жыл бұрын
My 242 is like oil. I barely see blue.
@solarsynapse2 жыл бұрын
Shake it first.
@larrycroft4704 жыл бұрын
why are these guys wearing safety glasses
@spwan102 жыл бұрын
That last bolt was red locker 😄
@karenwills-hassan94834 жыл бұрын
What is your daughters name if you have one
@mondavou9408 Жыл бұрын
It would have been better if it wasn't like an infomercial.
@VeganBytes Жыл бұрын
I could only find blue loctite in paste form (it's in an applicator stick now, like lipstick). Why have you done this when the liquid would be far superior for gap filling and also curing 😡
@karenthomson9749 Жыл бұрын
Slapstick loctite who would haven thought!
@highcarbrider6 ай бұрын
If you apply to the female threaded section you will achieve much better distribution of Loctite than applying to the male part 🤓
@chrisyerp1742 жыл бұрын
That moment when he tryed to screw the pop off cap off, we all knew he has never used it.
@g1ld3 жыл бұрын
opening it up is strangely not completely obvious for someone who never used it before, should have been mentioned
@solarsynapse3 жыл бұрын
I found out if you get any crumbs of fake plastic wood in your threads, the only way to remove the nut would be to cut it off.
@manbunmyname58662 жыл бұрын
Which kind of stroke are you having?
@solarsynapse2 жыл бұрын
@@manbunmyname5866 Usually 4, sometimes 2 with glow fuel.
@donschutte1418 Жыл бұрын
Why do I never hear or see people degreasing before they apply threadlocker , I fly rc heli and work with Loctite at least once a week I feel using brake clean a must and prefer the ford product I can tell you that get a bit of a trouble spot and don't do everything perfect in your construction and you crash . Also witnessed someone remove red Loctite with a 24 hr soak in CRC degreaser if that helps anyone oh ya heat also works but it must get 500 degrees to carburize unless it is high heat stuff
@mattcavanaugh60822 жыл бұрын
camera work made me dizzy while obscuring what needed to be seen.
@johntechwriter3 жыл бұрын
You should have included instructions for opening the bottle. It is not intuitive!
@anelson829311 күн бұрын
This should have been done WAY better... tighten one up at 30lbs no LT...and then tighten one up with LT at 30lbs .. then we see what lbs it takes to loosen each after they cure.
@Septagrim Жыл бұрын
"threads don't hold as well as you'd think. Which is why you need a threadlocker product." Ya know, with any other brand, i'd call that a load of bull, but i genuinely agree with that statement
@PeterPan-ix7ny2 жыл бұрын
U WANT TO LOOSEIN ANYTHING WITH RED THREAD LOCK JUST ADD GASALINE IT EATS UP THE THREAD LOCKER I CLEANED MY BLOCK WITH GASALINE AFTER I dropped inserts in my block guess what when I checked to see if the threadlock was holding 8 of my inserts came out so ha don't clean your area with gasoline before or after you insert the threadlock I used the red one 272
@Cuandoman8 ай бұрын
Or heat it, as the TDS suggests.
@jackpine10332 ай бұрын
Why are you talking down to us? I don't have a white lab coat either!
@HL-OOI5 жыл бұрын
243 is almost to the red side of the threadlock..
@VladOnEarth2 жыл бұрын
nobody needs a corrosion tutorial, thats obvious. I was looking for applying tutorial not for corrosion, for corrosion I can use a drop of oil there that will stay there forever. I bought a blue and it doesnt hold 5hit. Was trying to see maybe I was doing something wrong. It is super thin and has no effect on small screws AT ALL.
@MarkMc263 жыл бұрын
Just crossthread it, AKA "the Kentucky lockwasher"