Great video, I'm not even local but was researching the Xpel line. Great info, thanks for making this. Going with the Prime XR all around. :D
@tintmanfl2 жыл бұрын
No problem thank you
@danielmejia10962 жыл бұрын
Awesome video, found this super helpful in explaining the differences in them. Thanks!
@louiswilliams4657Ай бұрын
Thank you for the clarification!
@abdullahal-shimri30912 жыл бұрын
I do a lot of day time driving and just installed the 35% Prime XR on my windshield. My eyes are thanking me! Furthermore, no more headaches from glaring LEDs at night.
@hhova29 Жыл бұрын
How is the tint holding up on your windshield? Also is it dark and allows you to drive at night?
@fauguy235 жыл бұрын
Could you do a comparison between the Prime XR Plus vs 3M Crystalline? I think you did a Formula One vs Crystalline video before.
@talthan4 жыл бұрын
i 2nd this because i was going to do the 3m but was talked into this wondering if i did the right thing (prime xr plus)
@mannygi19773 күн бұрын
How much does a prime xr cost to install on a 2024 corolla all around except windshield at 5%. ?
@chazmithnewton9989Ай бұрын
@tintman - you had a video that showed the visibility difference between the Xpel 70% and llumar 70% … I was wondering if you have video that also shows the difference between xpel and 3m
@jamesvwalker2684 жыл бұрын
Huper Optik, 3M Crystalline, Xpel or Llumar for the Windshield? I want the best heat rejection film out there! Preferably in 70 or 50% Thanks!
@mad9934 жыл бұрын
i believe the best is either xpel prime xr plus and nanoflex
@jamesvwalker2684 жыл бұрын
@@mad993 Thanks, I'm familiar with Xpel Prime XR Plus, but not Nanoflex
@LeafyCEE2 жыл бұрын
I have an Appointment to get XPEL XR PRIME in about 20 days, I feel like i have 35% factory tint on my car right now but i wanted to go darker. Here in Arizona 33% is legal but it also gets 115 degrees here so im sure the cops are more lenient, so I might go with 20%. I just cant be too much of a risk to get a fix it ticket. That would be $1000 down the drain if i had to take this film off.
@cedric86264 жыл бұрын
Can you please give us a back to back comparison between llumar and xpel. With the heat sheet and stuff.
@tintmanfl4 жыл бұрын
I'll see what I can do but I'm not at the shops anymore. I'm back on the road doing residential and commercial so my time is limited to do these types of experiments. I'm sure I will eventually get a slow day where I will have time to do this. Thanks
@PearsonSpottingHD4 жыл бұрын
Hey, can you tell me if Xpel Prime XR is affected negatively by the defroster lines? I recently got an excellent Xpel Prime XR tint job done from a very reputable shop here in Toronto. I've heard using the defroster can cause bubbling on window tint and it brings down to life of the tint...I should've asked the shop installer but I forgot to.
@tintmanfl4 жыл бұрын
No you should be able to use your defroster like normal.
@definitionXrp Жыл бұрын
Is lexan better quality or lower?
@compacheo6032 жыл бұрын
Is the 5% on the xR plus darker than the reg XR or is it just the camera
@chrisaurous3 жыл бұрын
Hi me again I just got my windows tinted with ceramic I’m seeing quite a bit of white bubbles on the tint. I’ve never gotten tint before so I wasn’t sure if this is normal or if you’d suggest I take it back?
@ryanhendricks4265 жыл бұрын
Why did you switch from Llumar to Xpel?
@tintmanfl5 жыл бұрын
Problems with film and customer service for the past 3 years now. I've been experimenting with different films for over a year now and have found everything I've wanted from a film for me, customers and installers in Xpel.
@frankramirez22064 жыл бұрын
FWIW Xpel is manufactured by Garware who also supplies SolarFX and Global. Llumar is manufactured by Eastman who also makes SunTek. Garware makes a much higher quality film with a superior scratch resistant coating.
@ac7384 Жыл бұрын
What’s best to clean the Xpel tint. Should we use the xpel cleaner. Or can others be used. What’s best option ?
@tintmanfl Жыл бұрын
Sprayway and Invisible Glass work great too.
@edz18905 жыл бұрын
What up shawn where can i find a peel board the one you have in your video
@tintmanfl5 жыл бұрын
Home Depot residential door and window section.
@E995845 ай бұрын
Would stratos 30% be more blue than xr plus or xr black?
@tintmanfl5 ай бұрын
XR Black 30% is the blackest out of the three.
@brywong933 жыл бұрын
My local shop has the XR Black 70, I also have the option to special order the XR Plus 70 for a bit more. Color/ darkness wise are they virtually the same?
@tintmanfl3 жыл бұрын
Yes
@brywong933 жыл бұрын
@@tintmanfl so the XR Plus 70 doesn’t have a blue-ish tint to it compared to the XR Black 70?
@tintmanfl3 жыл бұрын
@@brywong93 no it does not.
@shadetree100003 жыл бұрын
Cool video 😎
@tonyquiroz281111 ай бұрын
Is it normal to feel the sun a bit through xpel prime xr ? I got 70 on the front windshield
@tintmanfl11 ай бұрын
Yes, it rejects 89% of the Infrared Heat, and 49% Total Solar Energy, so there's still 51% coming through. It makes a huge difference, but unfortunately, they will eventually get through. That's why it's best when the vehicle is in motion to blow the heat off the glass. This is why we usually tint residential and commercial buildings with reflective films. Ceramic absorbs while metal reflects. Unfortunately, reflective films are illegal on vehicles and can interfere with electronics. We recommend the Plus series on the windshield as it rejects a bit more than the XR. Thanks, Shawn TintManFL.com
@desmorider7479 ай бұрын
How much is the xr plus on a 2dr coupe?
@tintmanfl9 ай бұрын
Usually $550
@chrisaurous3 жыл бұрын
What’s your prices for the XR and XR Plus? I called a tint shop near me they use xpel for ceramic and they said it’d be $350 I’m guessing that’d be the XR cause $350 isn’t too expensive but I don’t want to ask them what specific one they use lol was just wondering what your prices were so I could infer what they are using
@tintmanfl3 жыл бұрын
For the average sedan we charge $200 fir Xpel CS, $350 XR & $500 XR plus. This is for the sides and rear window.
@chrisaurous3 жыл бұрын
@@tintmanfl awesome that’s what I figured around the prices were thanks for answering!
@iPapaRuss2 жыл бұрын
@@tintmanfl what about for just the front windshield xr plus?
@kurpal8904 Жыл бұрын
Is Xpel XR is comparable to Llumar CTX or IRX?
@tintmanfl Жыл бұрын
IRX
@kurpal8904 Жыл бұрын
@@tintmanfl How about XR Plus?
@nickkrikorian59094 жыл бұрын
what is your opinion on stratos?
@tintmanfl4 жыл бұрын
Great film
@3030hp2 жыл бұрын
@@tintmanfl would you do xpel xr plus or stratos for windshield, if you had a choice?
@tintmanfl2 жыл бұрын
@@3030hp Xpel XR Plus. FormulaOne Stratos 70 is extremely blue.
@3030hp2 жыл бұрын
@@tintmanfl thank you
@edz18905 жыл бұрын
Thanks
@IdeaMusicKen2 жыл бұрын
How do I know as a consumer I am getting what I pay for plus vs cs etc
@tintmanfl2 жыл бұрын
Every roll has a roll number to prove it that's written on the warranty card.
@IdeaMusicKen2 жыл бұрын
@@tintmanfl thanks
@toastyroach11995 жыл бұрын
Is this new film your best one for blocking heat?
@tintmanfl5 жыл бұрын
Xpel XRPlus rejects up to 98% Infrared Heat & 71% total solar energy aka radiant heat.
@missayawk4 жыл бұрын
Getting Xpel XR plus 45% for my windshield.Only the best for my Chrysler 300c.
@chrisaurous3 жыл бұрын
Hi me again I just got my windows tinted with ceramic I’m seeing quite a bit of white bubbles on the tint. I’ve never gotten tint before but I read online that they’re contamination bubbles so they won’t go away but I wasn’t sure if this is normal or if you’d suggest I take it back?
@shawnmangrum3 жыл бұрын
Are they still there?
@FRWD_FXLRST4 жыл бұрын
What % does XR Plus come in?
@tintmanfl4 жыл бұрын
70, 55, 45, 35, 30, 20, 15 & 5
@djgerbamusic72553 жыл бұрын
xpel hp?
@gurkhaman3 жыл бұрын
Can you please do this with the XR and XR plus clear tints. Thanks
@tintmanfl3 жыл бұрын
Yes I've been meaning to do that
@TheJayaldae3 жыл бұрын
Overall: for window tints, would you recommend 3M or XPEL? What is the overall best brand & series? (Doesn’t have to be either of those). I want the opinion of someone who installs these. Price is NOT a factor in this question
@tintmanfl3 жыл бұрын
Xpel has a better warranty and more options. 3M has a bad reputation of only lasting a few years. So Xpel.com 👍🏻
@TheJayaldae3 жыл бұрын
@@tintmanfl what is their top of the line series?
@arthurmumford36343 жыл бұрын
Quick question, if a customer gets too light of a film applied but wants to go darker is he or she charged for the removal or is it warranteed out.
@tintmanfl3 жыл бұрын
Depends on the situation. Sometimes I'll just put a layer of CS on top to darken and ask them to write a review.