In Win 301 - Micro ATX Tempered Glass Style

[@fredrikcarlen3212]

Been using this for about 2 weeks now with full custom water cooling. At first I was worried that wouldn't be able to fit both of my HWLabs Black Ice gts 240 rads in it but it works just fine with slight modifications to the front fan bracket as well as some new holes in the bottom. After the build I was surprised to see how little space was wasted when water cooling, which was a surprise to me. On top of the 2 240mm rads I was able to fit my r9 fury X (short gpu) with an ek block, and the EK D5 pump, with the larger 140mm res on it as well as about 30ish bitspower fitting and hardline tubing. Just thought I should share some information about water cooling in this case.

[@Gobeldeg00p]

What do your temperatures look like? I was planning on building a similar configuration and I'm wondering how it would perform.

[@fredrikcarlen3212]

about 50C on both CPU and GPU, water temp is like 40C with 4 noctua NF f12 fans. Just note that you have to mod the case a bit if you want to fit the bottom 240 radiator, just a few holes and make sure your rad is short and thin enough.

[@stoianovich972]

Any pics or link to your custom setup please ?

[@fredrikcarlen3212]

sure lemme take some :P

[@fredrikcarlen3212]

i.imgur.com/lNPH4G9.jpg, there you go. Sorry for the crappy phone photo, but if you need anything else, I am happy to provide it! Also if you need to know anything about the mods I had to do to fit everything I can provide that too. It's REALLY tight in there lol :)

[@TheEGGtech]

I've got this case as well. Extremely well built with thick steel, especially for the cost. A little warm but very quiet imo. I managed to fit the Noctua D15S (160mm in height) despite InWin stating it will only fit 158mm coolers. i7-7700k (4.8ghz) with a 1080ti and temps are just fine :)

[@peterreisberger150]

Did your Noctua D15s acutally hit the side panel or was there still a gap between? Because I acutally planned to buy this case and wanted to use a Be Quiet! Dark Rock 3 as a CPU cooler but its 16mm in height.

[@TheEGGtech]

There is still a gap. The 2 fans (I added a second fan - a Noctua F12 as a second A15 fan would not fit) and heatsink do not touch the side panel and do not move or get bumped when I install the side panel. I managed to fit a few pieces of paper between the panel and the heatsink to check how close it was and they move freely so there's probably about 1mm-2mm of room. It's tight, but it works.

[@TheEGGtech]

I will say thought that cable management is a bit of a nightmare in the case!

[@adrianocosta1214]

Can you please tell me about GPU temps? Does it goes beyond 80 degrees?

[@Dino-zc5wi]

I was looking for a high quality compact case and this case delivers. Sure there are some compromises but that is to be expected when trying to cram lots into a small package. Overall though very happy with this case and with careful planning everything fits nicely.

[@willrun4fun]

That hinged side is nice looking. I can’t use a Micro case though and that drive layout isn’t the greatest.

[@bradleylappin6107]

What mobo was that and does LGA 2011 get really hot in this case and I'm making a very similar build

[@skorpysk]

Does something like this exist, with a mesh front?

[@James-si4je]

The InWin 327 is the same case with a mesh front

[@skorpysk]

@@James-si4je Yooo Thanks mate

[@JudasRapidFire]

The front audio jacks are too small and I cant plug in my headphones or headset (both have standard 3.5 mm plugs). Do I need to buy an adapter?

[@speedburger5410]

Can a 3.5" drive sit in that space above the HDD cage?

[@teeblack06]

nice looking case from the outside but most In Win cases have little to no airflow which is an issue for me.

[@nikolakopun6779]

After almost year using it for gaming in average 3-4hours each day I must say that it was hard to find dust in PC since I dissassembled it whole. Also, airflow is pretty good. II get 50 celsius on CPU max on full load for hours and 70 celsius on GPU.

[@Icanthelplt]

looking forward to the build!

[@MdotAmaan]

According to you, what is the best inexpensive Matx case on the market? Currently trying to find one due to my cramped work space but cant afford to switch to an Mitx motherboard

[@BPSCustoms]

Define C Mini TG

[@GrumpyWolfTech]

Just bought one for my mini itx build with a 3950x and 2.5 slot 2080ti. Seems impossible to find and itx case that shows off your pc without choking the video card.

[@tomasvaris8162]

How's the temps?

[@MrEightCS]

Man really wanted this to be good. Air flow seems like big problem for beefy build im doing. Nice review

[@strongXP]

few monts ago i got its big brother, 303 white (it was the the first cases from in win sold in this country) and now i`m a bit gelous becouse i like more this one

[@jaceyc9418]

Kinda late review, especially when 301c is available now. For some1 like me who loves mATX form factor, 301c is probably the best option now since it offers the compactness a mATX case should be, and motherboard controlled RGB lighting.

[@Rikon01]

Love this case but was not noob friendly :) takes some planning to get things in. But once it’s done it’s beautiful:) I will not upgrade ever!!

[@TacoUP]

what an interesting take on a case the airflow looks tough as you said but another quality video and different as you dont normally do cases but hey its great!

[@BPSCustoms]

I do a lot of cases actually. More coming soon.

[@TacoUP]

BPS Customs my sincere apologies I have only been watching you for about two months and haven't gotten to your older videos yet!

[@jandkwhite6459]

I have this exact case...I love it

[@BPSCustoms]

It's definitely an attractive case.

[@stopdropandroll]

How are the thermals?

[@jandkwhite6459]

stopdropandroll could be better but could be worse. I never hit thermal throttle so thats all that matters

[@antiXa]

Thanks mate another grEAt video always nice presentation, I just wonder why you don't have 1m plus subs, grats mate.

[@jandkwhite6459]

I mounted my fans on the inside and i get better airflow

[@BPSCustoms]

Definitely an option

[@kennethpalacios4548]

Hi

[@HarmanSingh-gu4gg]

I want this case please give me one .