In Win 303 , (one) of the cleanest water cooling Gaming pc time-lapse build.

Hi guys!
This time i have decided to switch into a different color option and i'am sure many of you up there likes this color combination.
Like always, i do appreciate your support. Will keep on doing special builds in the near future if you keep this channel up with your likes and subs.
Here i present you the "Silent Machine".
COMPONENTS:
CHASSIS: IN WIN 303 amzn.to/2SVf16X
PROCESSOR: Intel Core i7-8700K 3,7 GHz LGA1151 amzn.to/2RJSJns
GRAPHICS CARD: Geforce Gtx 1080 ti Poseidon Platinum
MOTHERBOARD: ASUS PRIME z370-A amzn.to/2ASCkqX
RAM: Team Group Delta RGB DDR4-3000 16GB amzn.to/2RInDMF
SSD: Samsung VNAND 850 EVO 250gb m.2 SSD amzn.to/2PivnIv
SSD: Transcend 240gb 2" SSD amzn.to/2RGv5Is
PSU: Seasonic Snow Silent 750W amzn.to/2yYDFLv
SLEEVED PSU CABLES : Shakmod’s sleeved premium cables.
WATER COOLING PARTS:
CPUBLOCK: Barrow Lga 115x Cpublock
FANS: Aigo RGB C5 120mm fans
RADIATOR: Freezemod 360x27mm full copper
FITTINGS: Barrow 10x14mm compression fittings
PUMP&RES COMBO: Barrow DDC PWM 17W with manual + pwm
DISTROPLATE: Barrow In win 303 distribution panel.
HARDTUBES: Barrow 10x14mm PETG hardtubes
Where to buy water cooling parts?
Barrow&Bykski
www.aliexpress...
Music by Epidemic Sound (www.epidemicsou...)
ES_City Night (Instrumental Version) - Mikael Persson
ES_I Told You So (Instrumental Version) - Lvly
ES_Hurrungane - Luwaks

[@juliashenandoah3965]

This watercooling system is absolutely stunning beautyful! But after having lost one PC because of a watercooling leak on the CPU connector, I prefer classic air cooling now.

[@IamLastKings2049]

I have the same PC case and I want to install bottom fans, and I cant because the plugs in the motherboard are in the way. Great timelapse and setup

[@hoyle038]

I really like this build. The colours you picked a super clean. Good job.

[@Kaiser_XIII]

Daaaamn! You weren't kidding when you said this was clean! It's fucking spotless is what it is!

[@WombatMuffler]

I don't know a ton about building computers, even though I built my own, but DANG this is one sick build, nice work.

[@patrickegan8866]

That is cool. I can only dream...

[@cwadeh1]

This is good. I've been inspired by the same guy that's inspiring you. Well done.

[@VistaPanoramicabyLello]

Beautiful AF!!! Congrats!!! Regards from Brazil!!!

[@Lando6969]

That looks sick, one day im gonna own one like this. GG bro beautiful masterpiece.

[@b3ice]

Great looking build!!! Looking at using this case for my next build.

[@DJshadowXD]

Very nice build and good production of the video well done!

[@teazqt812]

Amazing work! I will be doing my first loop in this chassis after several months of homework. I'm using an itx mobo so I will have plenty of space inside to put a rad at the bottom. That res is beastly!

[@henrykerim4410]

Awesome time lapse, finally a diferent channel, congrats bro!!

[@brucepapuni5372]

So entertaining to watch. Well done.

[@aldenroswell8504]

N o i c e, that looks so clean. Amazing job

[@UltraVert]

Man that's awesome there is a distro plate for this case.. I have the MSI version. Wish you could still install the 3rd intake fan tho :(

[@sharlinespinal3287]

Full hypnotic effect kicks in at 7:50!

[@stefanramage1660]

so every fan is blowing the air out.. how do you think air will come in the case?

[@zeyuzha6657]

easy, open the plate hahaha

[@Lyle-km1lf]

It’s probably for show

[@Danth01gt]

The inside of the case isn’t a dang vacuum...

[@GB3770]

Differential air pressure???

[@RodDonnelly]

Bit late to the party, but what connections are you using and how many are actually needed? want to go liquid cooled but want to make sure I don't over or under buy the required items

[@FNXDCT]

it's looking so good :O

[@Westopia]

crazy build. i have the same case.

[@rajaahmadfarhan4485]

Hi there. If possible can share what is your loop order, looking to build a custom loop with this case too.

[@natejohnson1991]

Only a true gamer applies thermal paste like this

[@ha3mster684]

want to have it its glorious with project snowblind in the front panel top notch

[@abdullahfahad2006]

‏(وتولني فيمن توليت) إذا تولاك الله سخر لك كل شيء ولو كان في نظرك مستحيلاً

[@ilyakhodkin700]

Fans under gpu must be installed on other side

[@yahyaali658]

Where should they be installed I am noob trying to learn

[@envit0o]

Awesome build man! Where r u from?

[@anihaven7995]

is there really no intake fan for the sake of the cleanliness??

[@felipemagaz1717]

The bottom fans are intake

[@anihaven7995]

@@christianbildstein1047 yeahh it looks like it

[@billlumbergh2103]

The bottom fans should be intake, if not you are setting it up wrong...www.inwin-style.com/media/gaming-chassis/303/20180221075407_50854.pdf

[@LyK0sa]

Yeah, that always gets me with these KZbin builds, 100% negative pressure just so that you can see the prettier side of the fan. I guess it doesn't matter since these builds are rarely used and usually get immediately dismantled, but it still bugs me

[@MrNaigel80]

simply beautiful!!!!!!

[@Grebe90]

nice build but that airflow must be crap with no intake fans

[@Dobido52]

Yea don't know why he has the bottom fans exhausting when they should be intake I'm using this case for my next build too n that's how I'm having it 3 intake at bottom and 3 at top for exhaust

[@leandroferneles5942]

@@Dobido52 it works if you have all fans pushing air out , then it creates a vacuum and the vacuum puls frash air

[@leandroferneles5942]

it works if you have all fans pushing air out , then it creates a vacuum and the vacuum puls frash air

[@RobertD_83]

@@leandroferneles5942 it works but creates a dust nightmare. Ideally you want slightly positive airflow to encourage dust to not creep in through crack and seam. And being that he installed fans in the factory mounting locations, he'd get a slight bump from convection as well.

[@leandroferneles5942]

@@RobertD_83 i agree that

[@epicchris89]

But i have this case my own what is if you close the hole system? Mine gets to warm if i close the backside off it. I mean you are blowing warm air from inside throught the radiator. Could you answer me?

[@klaussapplesauce8136]

Perfectly fit

[@azecece1]

Hello do you sacrifice SSD emplacement with distroplate ?

[@rohanhalder9371]

5:36 what is it called? He didn't use any water block on gpu. What is it called where the fitting are inserted? And where can i get it?

[@BundymaniaReviews]

Nice rig ! I like the LED colour scheme

[@AKTechMods]

Thanks for the comment. I like also your shares.:).

[@ЕвгенийЗеленский-б5г]

beautiful

[@Tommy-lm7iv]

Ok, so nice build but where is the intake and why so many fittings. The performance is probably lowered majorly.

[@joeykido1450]

Are the PSU conectors the same as normal Seasonic Conectors? I want to combin cablemod cables with the PSU but the device is not officialy supported.

[@AKTechMods]

They are the same. Ask to cablemod's facebook page they are responding quickly.

[@jasonwu7461]

Gorgeous

[@DavidSanR]

thats amazing, how much does it cost to build a watercoling system like that? aprox.

[@kimjongskillz9511]

I have a wireless mouse plugged into the front usb 3.0 which works fine, but when i also plug in a usb hard drive in the other usb 3.0 on the front case then the mouse stops working or becomes very laggy. I tried a couple different mice and usb stick combos and this happens when both r plugged in as well as data transfer. Does this happen to anyone else/is my case defective?

[@ImCalvinTam]

I'm new to custom loops and I would like to mimic this build in my Inwin 303. Can someone help me compile a list of the proper fittings for this build. I'm looking at 4:57, but have trouble calculating the number of fittings and the name of each part. Love the build. Keep up the good work.

[@aiden2359]

just curious but why isn't the GPU power cable routed from the top instead from the bottom?

[@niconona6417]

Hey first off all very nice work I ll recreate this. I have one question, where did you get that distroplate from and if you made it by yourself is it possible that you upload your cad template to copy it. Thank you very much.

[@jovannibaeza191]

that one is from barrow. in my build, ill be using the one from bitspower

[@zulukzululk6163]

Can I buy full set of parts incl. case? Oversea parcel possible?

[@yop5349]

It's wonderful!!

[@Birbeh]

Lol I can see why you cut the video at 7:49 :P did you get a lot of spillage?

[@thibaudvanderschrick922]

Nice build, but why not go triple/duo intake on the bottom ?

[@peteward8559]

How good it the pre fit barrow water cooling gear so easy looks nice

[@miraculix9103]

is there any chance to hide the pump at the back?

[@brillywilly2998]

Where are the intake fans?

[@colbybarbour9990]

on the bottom

[@brillywilly2998]

@@colbybarbour9990 bro 2 years later and I’ve built my own pc in that time lmao

[@ongchangheng]

how did he get his fans to look like that?

[@rathahonnidiabo6117]

What did the entire build cost you?

[@juanmiguelrocha6260]

Would the waterwayboard work for a ryzen cpu? It says its only comaptible with intel cpu and the boards indicated on aliexpress. Just wanted to make sure before i buy

[@AKTechMods]

Depends on which brand your cpu block is? Let me know and i check it out

[@juanmiguelrocha6260]

@@AKTechMods Would definitely purchase a Barrow CPU Block for my ryzen. Can you let me know if it would work with ryzen? Then if not, could you let me know a reservoir that would fit the in win 303? Many thanks my man.

[@AKTechMods]

@@juanmiguelrocha6260 I can recommend you the cpublock in the below link. The g1/4 holes are in a vertical position, which most probably is compatible. The reservoir height must be under 200mm. In that case you use ddc pump separately, then i can recommend you to get 130-150mm reservoir. You need to then dismiss 1 x 120mm fan from bottom of the case. Tell the formulamod my greetings:) www.aliexpress.com/item/Barrow-transparent-acrylic-CPU-waterblock-0-3MM-microcutting-micro-waterway-for-AMD-LTYK2A-03/32710756337.html?spm=2114.search0104.3.18.639e3b01oHeobb&ws_ab_test=searchweb0_0,searchweb201602_4_10065_10068_319_317_10696_10084_453_454_10083_10618_10304_10307_10820_10821_538_537_10302_536_10059_10884_10887_100031_321_322_10103,searchweb201603_2,ppcSwitch_0&algo_expid=48b91aa5-8d1b-4812-a4b8-2cd3af72eb25-2&algo_pvid=48b91aa5-8d1b-4812-a4b8-2cd3af72eb25

[@ivoruiter6605]

Do you get the watercooling gear sponsored? I would like to order some barrow gear but the shipping just (almost) doubles the prices. So fittings become pretty much just as expensive as f.e. ekwb in my country..

[@AKTechMods]

I haven't applied for the sponsorship yet. Were you residing? EU or U.S.A?

[@ivoruiter6605]

Eu. The netherlands

[@AKTechMods]

@@ivoruiter6605 Je kan die barrow produkten bestellen door die ebay.de /mizucooling. Hij verzend vanuit england naar Eu .

[@ivoruiter6605]

Daar is het nog erger volgens mij. Rond de 6 euro verzendkosten op alle fittingen

[@ivoruiter6605]

@@AKTechMods i am confused. You don't speak dutch or do you? Anyways i did not get a reply on my dutch comment so ill just try it in english. It is even worse at ebay.de/mizucooling. Pretty much 6 euros shipping on every barrow fitting..

[@mikhaeldebruyne1312]

Hi !! I was looking how people manage they're watercooling with that case then i found your video is amazing really liked it !! But yeah i planed to use Gigabyte Aorus withe that case ( my prefence ) but they say it's only compatible with z370 chipset ? and asus :/ do you know other waterway boards ? or could dis one work with an aorus z390 ultra ? thx for the video !

[@AKTechMods]

You just need a cpu waterblock that matches to the distroplate. Take this cpublock as reference from aliexpress (LTYK3-04). No need to worry about motherboard.

[@mikhaeldebruyne1312]

@@AKTechMods Oh nice thx !! i'll watch

[@tonybalognamacaroni3402]

Pls don’t use aliexpress, especially for water cooling. It’s cheap garbage, with little of something long lasting. Don’t take my word for it if you want to pay for all new parts...

[@Innoox]

Am I right? You take warm flow from graphic to the processor?

[@sebkorsnes]

Loop order doesn't matter with the exception of this: the reservoir should always flow into the pump so the pump doesn't run dry. Here is a good video on it: kzbin.info/www/bejne/iJ-zc5KnapacjM0

[@chrismarshall1358]

What brand fans did you use?

[@AKTechMods]

Aigo c5 rgb fans with manual controller.

[@green4envy660]

block was custom?

[@lePoTo51]

TAKE MY MONEY ! I BUY IT !

[@ardui-soft1637]

The bottom ventilators are in the wrong direction...

[@carlosjames6157]

How much didbit all costs?

[@kingbrosas8458]

nasa mag kano po kaya yan ? pasagot naman po ng tanong

[@Thevolcomice]

only exhaust fans?

[@spazzjunk]

Where did you get fans with those logos in the center?

[@markissboi3583]

look up google :)

[@spazzjunk]

@@markissboi3583 I tried and they all had a different logo

[@felix7120]

if i'm completly new to watercooling, how much must I spend to geht a waercooling setup with my am4 chip

[@AKTechMods]

For the average build approximately 300-500€ for cpu, gpu blocks, water pumps, fittings and tubing etc. Don't spend more then that.

[@felix7120]

@@AKTechMods could you say me which parts you would chose

[@AKTechMods]

@@felix7120 write to me the components you got, and i try my best to guide.

[@felix7120]

@@AKTechMods got an r5 1600 16gb crucial ram b350 msi board and a rx 480

[@aldenroswell8504]

@@felix7120 you might also want to invlude your gpu, unless you dont want to cool it

[@kool1dence162]

What does it cost

[@basti6819]

Whats the price of this?

[@mi5a34]

Can You Include All The Parts Used As I Have The same case please

[@mobarakjama5570]

😻

[@mad2223]

is that Thermaltake Pacific Flow Indicator 2?

[@eeiean]

Mad222 it’s a barrow. It’s aluminum so don’t use it if you have copper or nickel rads/blocks

[@1dakikadakarakalem]

Good job 💛

[@WarriorPleb]

i love the look of builds like this but knowing my luck, leaks will happen all the time and it'll just be a waste of money. I'll stick to the classic air cooling forever

[@jovana7784]

where did you obtain that reservoir ?

[@AKTechMods]

Aliexpress. See the description.

[@peteward8559]

They are barrow google barrowint you will see them they do a lot for popular cases cheap too

[@gidderman]

Wow the comments... Just wow

[@harkamal_kooner]

Hello sir huge fan of your work I just wanted to ask how much does this entire thing costs and if I send you the money can you build it for me please ??

[@AKTechMods]

Hi! Thanks for your interest. I put the links of the parts in the description. i don't take custom orders for now.

[@harkamal_kooner]

@@AKTechMods I can't find all the water-cooling parts i can't find any full kit from barrow. please let me know it's total cost aswell . Thanks for reaching out

[@AKTechMods]

@@harkamal_kooner It's hard to calculate the total cost. Prices are changeable. You can buy from the sellers i have already shared in description. They sell also as a complete kit. Just get in touch with them, then they sort it out.

[@harkamal_kooner]

@@AKTechMods ok brother thanks for your time and you seriously build the best looking PC I have ever seen !!

[@GPStuntMan]

Lol do you buy thermal paste at Costco?

[@동우류-g9u]

What is that fan's name?

[@AKTechMods]

Aigo c5 with remote control.

[@hoodlumnano2986]

I want to do hard tubing so bad but Ik I’ll fuck it up

[@No_Transitory]

You made that look way to easy lol

[@Bigpike.225]

magnifique👌👌👌👌👍👍👍

[@edios300]

Omg

[@장어진-v9j]

It's wonderful...I want got it...may i have money

[@longboredterrie]

This radiator is blocking the power supply intake fan, that's not good, don't do this.

[@MrMxguyver]

White concept

[@GeorgeD1]

PSU at the top is so 20th century...

[@AKTechMods]

Welcome to the past:).

[@yiyun4285]

这是什么风道？

[@ryanthibodeau124]

5 bucks take it or leave it

[@snpzdrdarky2181]

It will be so unfortunate if he finds out motherboard is broke...

[@BIOSKillerBIOSKiller]

И снова пылесос!!!

[@markusbraunholz2220]

why the hell is almost every build video i klick today a white build... i got this in mind so long but now this just feels boring to me to do it anymore -.- But a good one get a upvote from me.

[@renanhenrique5493]

First like ....Brazil !!!!!

[@GB3770]

Can u run crysis 3 on that? Lol.

[@markissboi3583]

🤵2019 🎤NICE PC - I BuilT A PC 3 stage Apollo like rocket 🚀< 🤪 and wanna launch it into space near a satellite the wifi & internet b like100% Only thing is ? i cant repair any damages if hit😳 dam you space rock 1 hit & 37mph im dust then told mite crash into other satellites cause a change rection up in Space the BILL 4 damages be like💲 12 trillion $ eek ok NO launch Bad 🙄 hjaa

[@luisz172]

I'll give you $1250 for it! asap!

[@elstukov]

good video horrible and LOUD music

[@Альберт_Кронштейн]

Нижние вентиляторы стоят на выдув... 🤦‍♂️ Ещё и ССД на двух полосочках говноскотча.

[@Toomanywelps]

PC porn!

[@RecordingViper]

360mm for cpu and gpu??????? hahahaha

[@vietfattyxD]

which gpu block would you recommend to run with this setup?

[@AKTechMods]

Barrow off course. At least the acrylic is fairly thick and the rgb led (4pin) is compatible with Aura Sync (directly into 12v rgb header).

[@vietfattyxD]

@@AKTechMods Did I even need to ask that question? Haha. Thanks for the recommendation. Great build

[@vietfattyxD]

@@AKTechMods sorry to bother, but what is the extra spinning thing that you have connected in-between your tubing? I've been wandering what they're called

[@AKTechMods]

@@vietfattyxD thermaltake pasific flow indicator v2. You can ask anything. I try to help.

[@vietfattyxD]

@@AKTechMods cool so that's what they're called. Is there a mixing of metals in this setup? I was trying to look up which metals the plates were and I think your radiator was a different metal? I might be confused with a different build that I'm looking at too.