INAV 3.0 & 4.0: Final tweaks and how to maiden the model (2/2)

  Рет қаралды 13,050

Painless360

Painless360

Күн бұрын

Пікірлер: 48
@Simpo20
@Simpo20 3 жыл бұрын
Been a viewer for a long time! Quit flying back in 2015 and returned to it last year (quads). Cant believe how far the hobby has come! Loving quads so much and fancied a wing - have ordered an AR Pro. Your guides have helped immensley since my return. Was a bit nervous about using INAV, but this series is by far the most concise and useful out there and now have 'confidence' to build and maiden. Cheers :-)
@mikeflight9
@mikeflight9 3 жыл бұрын
I am exactly in the same situation as you Adrian. I was flying with fixed-wing glow and electric for about 4 years and that is going back about 10 years ago. As you say the hobby has become more advanced in that period of time. Far more advanced since the first computer transmitters came out. This channel is, in my opinion, the best channel to learn from. It is a totally new learning curve.
@Idefix70
@Idefix70 3 жыл бұрын
Thanks Lee! Again very informative. Now it is waiting for spring and summer to start here in NZ so I can get it out for first flight! Thanks
@johanwessels4071
@johanwessels4071 3 жыл бұрын
BIG thank you for all you share so generously! Your videos are absolutely some of the best available and has helped me immensely. Much appreciated!!
@CurryKitten
@CurryKitten 2 жыл бұрын
That was super-helpful Lee. Just about to try a wing out and wasn't sure on all those auto tune/level modes worked. Have set everything up, ready for a maiden!
@Painless360
@Painless360 2 жыл бұрын
Best of luck with your maiden!
@mikeflight9
@mikeflight9 3 жыл бұрын
Top class teaching channel. Just getting back into the hobby and I am really amazed at all the new technology involved. A new learning experience for me now. Keep up the brilliant work mate. 👍
@Painless360
@Painless360 3 жыл бұрын
Thanks and welcome!
@maxun1
@maxun1 3 жыл бұрын
Fantastic Lee, you got a little monster with the Zhod.
@MCsCreations
@MCsCreations 3 жыл бұрын
Fantastic tips, Lee! Thanks a bunch! 😃 It's going to be REALLY useful! Stay safe there with your family! 🖖😊
@nolimits1155
@nolimits1155 2 жыл бұрын
I would like to thank you for sharing your knowledge. I have a doubt I don't see the RTH option in flight modes, but in your video it appeared, I have the same version 3.0.2
@Painless360
@Painless360 2 жыл бұрын
GPS flight modes only appear when the GPS is setup correctly. Best of luck
@BBSlats
@BBSlats 2 жыл бұрын
Thanks for these videos. Just to confirm you only use auto level on set up and its on a switch. Or do you use it all the time when in horizon like your older video.
@Painless360
@Painless360 2 жыл бұрын
How it work changed. This is is how it works now in the latest versions.. Happy flying
@DadsRCHangar
@DadsRCHangar 3 жыл бұрын
I swear that’s designed from the Lippisch P.15. Great tip video 👍🏻
@swissfreek
@swissfreek 3 жыл бұрын
The way the new autotune works is crazy. You're right, it's totally sluggish at first. Do a couple complete rolls and you can almost see it speeding up as you go. Same with loops.
@zcontrol1
@zcontrol1 Жыл бұрын
great videos hello from switzerland! I just trouble with putting and connecting my matek411 in my dark Brize can you please show you soldered the connector sreight or 90 deg or cable directly soldered into the board
@Painless360
@Painless360 Жыл бұрын
Check out my soldering video where I do just that - kzbin.info/www/bejne/fF6VY4iQZ993Z5I - I hope that helps.
@tausifpv
@tausifpv 2 жыл бұрын
Great Videos! I'm wondering if one should do the autotune with cruise or max. throttle. With max. throttle the detected rates should be higher and the PIDs maybe lower. Perhaps cruise throttle is better because the navigation modes mostly use cruise throttle and therefore the PIDs and rates should be tuned for this. What do you think?
@Painless360
@Painless360 2 жыл бұрын
I tune at cruise or 50% throttle... Happy flying
@imadabualia4843
@imadabualia4843 2 жыл бұрын
Thanks Lee. Do you have the horizon mode on when you auto launch? It showed Acro then jumped back to horizon. Did have horizon the whole time or you switched to it when you took over?
@Painless360
@Painless360 2 жыл бұрын
Three flight modes: Horizen, manual and Acro usually. Horizon bring the one selected for it to use when Autolaunch is cancelled..
@WernerBeroux
@WernerBeroux Жыл бұрын
The WiKi also suggests to enable failsafe to RTH but isn't that only a good suggestion if and only if you have a GPS?
@Painless360
@Painless360 Жыл бұрын
Yes. I've never installed INAV without a GPS here... Best of luck
@roomdiTof
@roomdiTof 9 ай бұрын
Hi. Thanks for the video. I have one problem. Servo work perfect. But the engine cannot be activated. I use a speedybee f405 wing. Inav 6.1, radiomaster tx12 mk2 and use model delta . Motor calibrated and I see inav/receiver trottele get signal from my tx12. Maybe you can tell me something.
@Painless360
@Painless360 9 ай бұрын
kzbin.info/www/bejne/iHeyZYd6fr1opbc
@traxxi2003
@traxxi2003 2 жыл бұрын
Hello Lee! In the video, you mentioned something about reducing the Rates to what the model setup guide calls for. But right after reducing the rates, you put them back to 100%. Do I need to leave the rates @ 100% before my maiden/autotune/auto level flight?
@Painless360
@Painless360 2 жыл бұрын
Set the rates to give the the travel needed when in manual mode. My linkages were setup so 100% worked for me on this model.. Happy flying
@traxxi2003
@traxxi2003 2 жыл бұрын
@@Painless360 , Thank you for the lightning-fast reply!!!
@sparkey044
@sparkey044 3 жыл бұрын
Following your video and setting up a wing as per your video. Using a F411 controller. Problem I’m having is cannot get the arm switch to activate. Motor runs in output tab, but cannot get the arm to work. I have not activated or installed the gps as yet.
@Painless360
@Painless360 3 жыл бұрын
See my video on troubleshooting arming - kzbin.info/www/bejne/m3qyZXp5pLipjdk
@haoxie4402
@haoxie4402 2 жыл бұрын
Thanks for your videos ,its a huge help for the new beginner ,may i ask you ,i haven's see autolevel autotrim in my inav 4.1.0 modes,could you please show me something,thank you so much.
@Painless360
@Painless360 2 жыл бұрын
They don't appear unless you have selected a fixed wing model... Happy flying
@haoxie4402
@haoxie4402 2 жыл бұрын
@@Painless360 ahh ,i see ,Thank you so much.
@kirkjensen1718
@kirkjensen1718 3 жыл бұрын
when you have the board backwards, i.e. 180 in yaw.... to adjust for nose up flight is board alignment for pitch now (with 3.0) always positive? in 2.6 it was negative for a backwards board.
@Painless360
@Painless360 3 жыл бұрын
No idea. I mount the FC in the right orientation and strongly recommend you do too. Best of luck!
@willay747
@willay747 2 жыл бұрын
i love the autotrim, worked great on my same plane as yours. I do not get as much speed though. What battery are you using? And yes, the roll rate is crazy! Love it.
@Painless360
@Painless360 2 жыл бұрын
I'm using a 4s 2200mah pack.. Happy flying
@willay747
@willay747 2 жыл бұрын
@@Painless360 omg stupid me, being a small plane i thought it was 3S max. Thanks for the help!! Love your channel!!
@willay747
@willay747 2 жыл бұрын
@@Painless360 followup- i put in a 4S now and she is a screamer! Super fast and fun to fly. Thanks again!!
@Stephanbrown1987
@Stephanbrown1987 2 жыл бұрын
I noticed in a previous video, you have auto level activated with horizon mode together on the same channel, yet in this video, you have it on separate channels, then you turn auto level off. I'm confused as to whether should you have them together or separate?
@Painless360
@Painless360 2 жыл бұрын
I've used both but was advised that it's better to use it on a seperate switch and only use it whenever you trim the model. Best of luck
@AndrzejRoszkowski
@AndrzejRoszkowski 2 жыл бұрын
is it possible to set "autolaunch" to spin motor after throw?
@Painless360
@Painless360 2 жыл бұрын
Yes, see my video on how to set up it up. Best of luck
@jamiebrunton6696
@jamiebrunton6696 2 жыл бұрын
What are the bars at the top of your OSD?
@Painless360
@Painless360 2 жыл бұрын
kzbin.info/www/bejne/j3WqhnaAdsmbn5I
@EliteFpv
@EliteFpv Жыл бұрын
On maiden do you start CG dead on or a little nose heavy?
@Painless360
@Painless360 Жыл бұрын
Both are good options. I try to get it spot on if I trust the vendor... Happy flying
How to calibrate your INAV compass at the field using the sticks
7:02
How to setup and fly INAV 3.0 Missions (including POI!)
19:04
Painless360
Рет қаралды 16 М.
SISTER EXPOSED MY MAGIC @Whoispelagheya
00:45
MasomkaMagic
Рет қаралды 19 МЛН
Хасанның өзі эфирге шықты! “Қылмыстық топқа қатысым жоқ” дейді. Талғарда не болды? Халық сене ме?
09:25
Демократиялы Қазақстан / Демократический Казахстан
Рет қаралды 357 М.
INAV 3.0 & 4.0: How to setup a Fixed Wing model. (1/2)
23:07
Painless360
Рет қаралды 19 М.
How easy is it to setup INAV 4.0? Different from INAV 3.0?
13:13
iNAV PIDs Tab -- 100% EXPLAINED! 🏹
22:56
UAV Tech
Рет қаралды 11 М.
Setting up auto launch, or launch mode, in iNav
33:16
Mr.D - Falling with style
Рет қаралды 20 М.
Baby AR Wing Pro - my build and maiden flight
6:43
BaneM
Рет қаралды 2,6 М.
My Top App Pick For 3D Scanning: You'll Be Shocked!
16:26
My 3D Print Lab
Рет қаралды 178 М.
SISTER EXPOSED MY MAGIC @Whoispelagheya
00:45
MasomkaMagic
Рет қаралды 19 МЛН