Incredible Satisfying Production Processing with Modern Technology & Amazing Factory Machines

Incredible Satisfying Production Processing with Modern Technology & Amazing Factory Machines.
🔥🔥 Subscribe StarTech TV: kzbin.info
==========
In this video:
1. Özkoç Hidrolik Makina
KZbin: kzbin.info/door/NB4IdCbE9EfSuD1YAviriA
Website: www.ozkoc.com.tr/en/home/
2. Yankang Plastic Machinery
KZbin: kzbin.infofeatured
Website: www.yankangmachine.com/
Facebook: yankangmachinery/
Twitter: MiyaWang12138
LinkedIn: www.linkedin.com/in/miya-wang-543905164/

[@BlackMaker]

기계 돌아가는 소리가 너무 좋아요 ❤️

[@reginaldbowls7180]

That match factory is terrifying

[@jkrolak7978]

Almost hypnotic watching how fast a properly manufactured machine works.

[@lindanewall9683]

I hope the workers in the match factory dont strike.

[@Dr.K.Wette_BE]

🤣 Very good one !

[@theelectricunicyclist9069]

We've got a winner here!

[@Tom_0815]

That would be lit.

[@arbjful]

😂😂.. great one. You are a wordsmith

[@AvoxionYT]

If I was a kid I would loove to play astronaut in those barrels.

[@jeffreywhitlatch1409]

I love watching how things are made.

[@RegebroRepairs]

2:50 I have actually several times wondered how those are made. Now I know. Very clever.

[@Perfectly_Satisfied]

This video is so satisfying that I can't stop watching it.

[@fromscratch2654]

2:58 I have never wondered how they are made. Now i know. Thanks.

[@etiennebouquet9305]

les tonneaux bois sont splendides ! bravo

[@harmonicresonanceproject]

I was relaxing along until I saw the massive open centrifugal cauldron of mortal danger ! 4:27

[@superdau]

Yep, that will twist your arm right off. Of course you can say "don't reach into it while it's spinning". But imagine you as an employee got time pressure and a quota to fulfill. You might start reaching in a second or two before it stops completely. That goes well a thousand times until it doesn't and you have a broken wrist or shoulder. That's also exactly the reason why washing machines won't open for quite after having stopped (and can't be tricked even by disconnecting power, because it's a thermal switch that has to cool down before releasing the latch).

[@stanleydenning]

Just the same as the spin-dry on your washing machine. What's the big deal?

[@brycering5989]

That first one wound me up with that rhythmic beat.

[@yarrdayarrdayarrda]

4:58 That's what the lumber manufacturer must do to a lift of wall studs before shipping to my local renovation store.

[@jeffaurand2345]

First piece is titled incorrectly, that's a rotor being wound. Loops up the shaft will go to the commutator.

[@theelectricunicyclist9069]

It's cool how you can see how it winds the three phases one at a time, pulling the wires for each phase up when it's done.

[@jackmclane1826]

3:16 I seriously asked myself several times how these foam pieces are made! Awesome!

[@edwardmitchell6581]

Same. Never expected that. Can't even believe that it words after watching it, although I understand how.

[@CSNingYouKeJi]

Thanks for the sharing

[@Necromorphicon]

2:58 have always wondered how they make it, thanks

[@anthonyesquivel5863]

what kind of paint is on the green discs that survives the pressing? shorts and flip flops on the factory floor?

[@iamamodel7]

I know that guy at 6:05. His name is Cooper. I'll get my hat...

[@timmckee2813]

...those oak tanks...wow...

[@Bianchi77]

Nice video, keep it up, thanks :)

[@dron7995]

Ого круто.

[@333movie]

예전에는 다 수공으로 얼마나 많은 시간이 들어갔을지.

[@kimt6333]

Cool, a youtube channel to add to the never watch again list.

[@TechTcheHD]

Great video! 🙏

[@indymark4064]

Large wooden barrels...for what?? It would be better if you knew what was being made and shared. No yellow hose in thumb nail???????

[@sunsetpark_fpv]

@ 7:14 you see Oceangate explorer, ready to go

[@schalotten]

I'm pretty Shure that the first thing is a rotor not a stator ;)

[@herdmay1]

It’s a brushless motor.. hence a stator .. by definition that it’s stationary

[@sitiradziyah2159]

Rad, stysafe, this video lk great, amazing, interesting, show how to made this product with type of item in this industry it can inport,,export other country, bless to all staff worker in this video, stysafe, stystrong, this machine, made types of item. Lv this video. Frm. Miss. Rad.

[@davecooper406]

The video was good until and awful and unnecessary music started - ugh.

[@CesareVesdani]

Today's modern machines are amazing and more accurate than ever.

[@m1leswilliams]

And more polluting unfortunately.

[@DaviD-we6hm]

Than ever 🤔🤔, then how Pyramid is made.

[@Dr.K.Wette_BE]

​@@m1leswilliams Not really, when everything was powered by steam...

[@Dr.K.Wette_BE]

@@DaviD-we6hm Way more easily than we first thought. Search for Jean-Pierre Houdin, French architect who found out "how".

[@jackwhitestripe7342]

good job sir, from india

[@BhimSingh-rk4zp]

It Is Very Nice.

[@lepremierquidortreveillaut5178]

5:29 meilleur de tous!..

[@geopwd]

That was a rotor winding not a stator winding

[@pook6212]

It's incredible how dissatisfied I am!!!

[@viggo48sam]

Sejt❤️❤️🏁🇩🇰

[@sky173]

The machine of my nightmares - 7:18

[@reums95]

Sympa a la fin le gobelet tombé par terre et remit dans le bac...

[@melearningtech8741]

Very impressive and Interesting

[@davidplenderleith4176]

Needs some editing to kill the boring parts

[@mattikaki]

First I thought that this was a channel of STMicroelectronics because the logos are almost the same. Anyway, interesting to see these and try to guess what’s going to be the end product. These would be much better if you had 100% audio of the factory’s instead of boring muzak.

[@PresidentBust]

I only know a basic amount about 3 phase power. May i ask why the wires are allowed to touch? I thought that would be a no no but obviously it doesnt stop them?

[@Dr.K.Wette_BE]

There is a varnish coating on the wires. (that's what smells when a motor burns)

[@amitmaddheshiya4419]

So wash you disposable containers before using it.

[@user-uw1gt9rc8v]

ПОСТАВЬТЕ пожалуйста геолокацию !!!!?

[@10812059]

I thought it was from STMicroelectronics.

[@user-lr6iu7sk6v]

سبحان الله الخالق العظيم علم الإنسان كثير من التقنيه ولكن ويبقى كامل العلم عند الله عز وجل ما نراه الان شيء بسيط من نعيم الدنيا و جنه الفردوس فيها كل شي ونعيم أبدي يا ربي يا الله حسن الختام والموت على دين الإسلام

[@ToolMachinebeast]

✌✌✌👍😎😎

[@poppabear9279]

So, imagine how bad it would suck, getting pulled into that Profiling Roller at 2:58 ... dear god, that's a horrific contraption. I wonder what type of safety device they have on that, which would stop someone from getting pulled into that nightmarish device? Gotta be some type of a foot based safety, or maybe someone right there on the off switch.. eesh.. the things that go through my head... but that machine is what nightmares are truly made of.

[@Dr.K.Wette_BE]

On the left, you can see a blue button on a red box. A red coated steel cable is attached to it (hard to see). At 3:25 you can see the other side. If you push or pull 1 cm on it, it causes a hardware emergency stop. (the blue button is for reset) 😉

[@theelectricunicyclist9069]

When Stephen King saw that machine he immediately went home and started writing a new novel.

[@dannoren8547]

I would love to see that in slow motion.

[@theelectricunicyclist9069]

Click on settings (the gear), playback speed.

[@stanleydenning]

7:17. Stick matches. Does anyone ever use these anymore? Bick kind of kicked its ass. Right?

[@gorkgorkahn8301]

modern technology doesn't need crew, even badly paid.

[@Wolf359HeavyIndustries]

Why are you using STMicroelectronics logo? I could be wrong but I can't find a relation between StarTech TV and STM.

[@QuasiRandomViewer]

0:00 What body part are we seeing there? It looks like a heel and ankle bone, but that seem unlikely.

[@JeffDeWitt]

Looks like an elbow to me, likely the operator is doing something with what feeds to wire into this machine.

[@QuasiRandomViewer]

@@JeffDeWitt I can't _quite_ see it, but that would make a lot more sense.

[@mrstarfire9336]

So am i the only person wondering what happens if you fall into these machines???..Ok i will get some help

[@theelectricunicyclist9069]

Reference: Stephen King's 'Graveyard Shift'.

[@whereswaldo5740]

That’s a lot of copper wire. And that used to be done by hand.

[@SIE44TAR]

My grandfather was somewhat of a tinkerer/inventor who once built a winding machine out of scrap parts he had laying around his shop, to help with a contract he had to wind stators and rotors for a motor company back in the 50's.

[@FatJesusLive]

I want to see the finished product... So angry right now!!!!!

[@peckelhaze6934]

How on earth do you start to make a machine to produce something in large quantities?

[@cameronvadnais4388]

Engineers design it. Machinists cut the metal to exact sizes. Fabricators assemble and size any last parts. Operators run and fix the machines.

[@alexandrinaalexandra1357]

Vitor ola Portugal 👍👍👍😃😃😃🇵🇹🇵🇹

[@PGRvlog]

txt

[@alexanderthevoice]

Love how they copycat the ST Micro logo

[@Coboldt64]

Wer übersetzt eigentlich so dusselige Überschriften?

[@derechteBenderBaer]

Ich glaub, das macht KZbin automatisch.

[@user-jp2yo1so2j]

16:17 ตามเวลาภาวะ และประโยค ระยะเวลา ตามเวลา มีผู้ ประสงค์ ให้ประสพ จาก แผนการ ทางภาวะ กระทบ กระแทก หรือ แผนการ รพ. ไตร่ตรอง โครงสร้าง ให้ดำเนิน การ ไตร่ตรอง ตาม แผนการ ของคนร้าย ผู้ร้าย ผู้ ไม่หวัง ผล ของ การ รอดพ้น จาก แผนการ สร้างรูปมูล เหตุคดีจน ณ ปัจจุบัน ฉกาจ ประกาศิต และ อักขระ คำ หรือ คนร้ายคำ ใน แผนการ ที่คนร้าย ฉลาด เก่ง ทุก อริยาบท สมองความคิด ชมคนร้ายในแผนการว่าเก่ง เป็นผลของ อะไร ได้บ้าง เมื่อ ตกในสถานการณ์ พาล ผล ถึง จำนวนคนร้าย แต่ละรูปแบบ แต่ละประเภท หรือ มุม บีบ ทรัพย์ แต่ ได้ ไม่ ก็ ไม่ยาก หรือความต้องการ เช่น ....... เรื่อง คำ ง่ายๆ เช่น ตบ ทรัพย์ ...... หลักการ ที่ พาล มาใช้ ให้คิด อย่าไป เข้าใจให้ยาก

[@seanwatts8342]

Are these rinsing machines or filling machines?

[@m1leswilliams]

I used to love watching these videos now all I see is more plastic being dumped out....it is a shame.

[@theelectricunicyclist9069]

It's all recycled right back into the hopper.

[@IsleOfFeldspar]

This presentation technique where it changes what you’re looking at once per second is bizarre, fatiguing, and unnecessary. I can’t follow what’s going on.

[@MobileMood]

no music is better

[@robertrollandin2681]

🤔………😉

[@extradiamonds.utubestolemyname]

Did you just steal STMicroelectronics logo?

[@ikbal8557]

.

[@MrNewcarscott]

The music does not help in any way. Lose it. Lets hear actual production sounds. Its part of that life. Its real. Enough of the disney BS. I've worked these jobs. there is no sill inane soundtrack playing.

[@davidgraham9053]

It's a bunch of other peoples videos (including music) that the uploader has combined and is making money from. Unless logo is present, no credit to the original producers. Heck, the video doesn't even show the click-bait picture used to sucker you in.

[@MrNewcarscott]

You're trying mask the terrible mind-numbing soul-destroying drudgery of these jobs. why? Incredible Satisfying?????????

[@grinsikleinpo7]

If your video description translate into this "Unglaublich zufriedenstellende Produktionsverarbeitung mit moderner Technologie", then you have a very stupid Google-tanslator. Its very unsatisfying.

[@davidronson8712]

@9:44, they touch the cups with their filthy hands, disgusting, glad it is not in Canada.

[@johnh8615]

Same old repeat. Nothing new. Waiting for some new content.

[@user-ip1oj7xr3v]

Последние, чистые колхозники, без масок, перчаток, формы, епта( такие же отбросы, русские, ужас!((

[@prohkbr]

нет, это не русские, 9:50 слышна какая-то речь, спасибо что не плюют в стаканы..

[@pat14162]

Arrêtez avec cette traduction française complètement débile et ridicule !!! ça veut dire quoi "satisfaisant" dans ce titre ? arrêtez ce genre de lamentables conneries

[@mecharena-tezcatlipoca5085]

Clikbait dislike 😒

[@Likelite]

nice