INCREDIBLE!! This Creality Falcon 2 Laser engraver, VERY POWERFUL AND FAST

Per la prima volta provo un' incisore da 22W che fa delle incisioni sul metallo lievemente colorate e taglia con un' altissima definizione e pulizia
🛒STORE UFFICIALE: store.creality.com/eu/product...
If available:
SUPER COUPON ESCLUSIVO: 👉Dan180👈 (240€ di sconto)
🛒 GEEKBUIYNG: www.geekbuying.com/go/7TacOXo7
🛒TOMTOP: www.tomtop.com/it/p-os6802au....
SEGUIMI SU TELEGRAM, grazie ai miei SUPER COUPON potrai farti un laboratorio gargantuesco spendendo pochissimo e prendere apparecchiature da me consigliate per costruire tutto quello che vuoi. non te ne pentirai:
👉👉👉👉👉 TELEGRAM: bit.ly/2V9CWVY (for coupon)
🛎🛎 SOCIAL
👉 KZbin SUBSCRIBE !! bit.ly/2Kn6yco
👉 INSTAGRAM: bit.ly/3kPlAon
👉 FACEBOOK PAGE: goo.gl/s6Utqw
〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️
ALL THE EQUIPMENT I USE IN MY LAB AND THAT YOU SEE IN MY VIDEOS
👉 10 Must-buy Banggood: bit.ly/3mP76Yz
👉 my video making equipment: amzn.to/34LvVM1
👉 my tin soldering equipment: amzn.to/33RlBmB
👉 My power tools: amzn.to/3711O6d
〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️〰️
Specific:
Model: Falcon2
Laser Power: 22W
Cutting Capacity: Cuts 15mm wood in one pass
Engraving speed: 25000mm/min
Colored Engraving: Support
Dot size: 0.1mm
Working area: 400*415mm
Laser wavelength: 455+5nm
Resolution: 254dpi
Laser source: diode laser
Input voltage: 100-240V~50~60Hz
Output Voltage: DC 24.0V 5.0A
Supported file formats: svg, png, jpg, jpeg, bmp, dxf
Supported software: LaserGRBL, LightBurn
Supported materials: Cardboard, wood. bamboo. eraser. leather, fabric, acrylic, plastic, metal
Engraving file format: Gcode
Operating system: windows/macOS
Package weight: 10500g
Pack size: 72.5 x 62.5 x 15cm
#engraver #creality #falcon2

[@DanieleTartaglia]

DIDN'T FIND THE COLOR ENGRAVING CLIP? You can find it here, in the Italian version: kzbin.info/www/bejne/g52xmZSLfKqVa7s

[@atreyuarg]

Clickbait

[@Spookjuhh]

So, ehm, what happened to the color engraving?

[@MauiRedMan]

The laser is in color not the engraving lmao😮

[@DanieleTartaglia]

In the video editing for this versione, I forgot to put the part where you could see a colored effect due to a chemical reaction on stainless steel. Excuse me. You can see this part in the video on my Italian channel kzbin.info/www/bejne/g52xmZSLfKqVa7s

[@DanieleTartaglia]

@Ryan Bagwell 😂😂😂😂

[@DavZell]

​@@DanieleTartaglia It's at 7 min, 54 seconds in that video

[@id104335409]

Wait, What happened to the "engraves in color" part????

[@DanieleTartaglia]

In the video editing for this versione, I forgot to put the part where you could see a colored effect due to a chemical reaction on stainless steel. Excuse me. You can see this part in the video on my Italian channel kzbin.info/www/bejne/g52xmZSLfKqVa7s

[@id104335409]

@@DanieleTartaglia Thanks!

[@spam.stuff.things]

Then you should rename the video

[@MikeJones-wq4qv]

@@DanieleTartaglia so change the title, lol

[@blaccouttv.3846]

I didn't see color effect in your Italian video either!!

[@NomadSoul76]

It's funny how even the company website for the laser says almost nothing about the alleged color capability. It's a large page that goes into depth on many of the features of the system, but the supposed color capability is only mentioned at the top of the page and then is essentially forgotten.

[@kolbywaddilove3898]

Thanks man, appreciate this. You are one of few that actually tests this machine with material other than 3mm laser ply! Thankyou. I work with a 40w co2 laser at work and with what you have cut here, this thing is equal to it. Very impressive. Only thing is the speed is alot alower but hey, for the price, i might just have to get one for home jobs. Thankyou friend

[@hotsonaj]

I’m trying to work out why I’m unable to etch stainless steel with same laser same software and same setting can you help me

[@Pepa667]

Does it cut 0,8mm steel and clear acrilyc ?

[@miharix]

Interesting product. Please next time add some visual marker when video of operation is in real-time and when speedup (example put analog clock in background).

[@StellarbrizHub_987]

Nice Product ❤

[@edgardsalas8269]

Hi, do you know the code of the laser diode which your machine uses?.

[@MegaGraham123]

What about extraction? How it works

[@mikolajmikun5337]

Is possible to buy only laser module?

[@philong02]

It's mine too. This machine is so powerful. I engrave glass too, amazing. I very interesting on color engraving. I want push the test but I need to buy some stainless plate :)

[@user-xt9zp1qo1t]

Can you say ,if i can use it for concrete

[@bOrR3gO69]

Por favor, sube mas videos cortando con más materiales. 😄

[@cosmicaug]

8:07: Careful with that! A lot of faux leather out there will contain polyvinyl chloride. You should never engrave or cut chlorine containing polymers with a laser. Even if you are certain that that particular sample used did not contain PVC, you really should not be showing a video of cutting this material without making it clear to viewers that this particular issue exists and that they should always validate that the composition of their faux leather does not include PVC.

[@NerdSnipingBatman]

PVC is relatively innocuous. It doesn't react with anything in the human body. Yes you should wear a respirator, but only because you don't want to breathe in small particles of anything: the physical damage of small particles in your lungs is bad regardless of what the particles are. But PVC itself is pretty safe: hence why your drinking water comes in PVC pipes.

[@cosmicaug]

@@NerdSnipingBatman , is it really that difficult to google "can I cut vinyl-PVC in a laser" before you go and post a comment like that? Check what should be the 1st or 2nd hit when you google that (depending on whether you search with quotes) and look at the photos. Yes, PVC is "relatively innocuous". The comment I made, however, was not about plumbing. The comment was about what happens to PVC when you hit it with a high powered laser (which does not generally happen to household plumbing) and about whether doing so produces any decomposition products (hint: it does) and whether such decomposition products might be dangerous to your equipment or to human health (hint: yes, they are). HTH

[@abhayart456]

Very nice sir

[@jkjome4095]

Have you tried cutting thin metal?

[@huhuhu543]

how to do color laser engraving?

[@3dler923]

color ??

[@AndrewAHayes]

There are some really really nasty chemicals released from that PVC faux leather, your a brave man!

[@rockymarciano9569]

Ciao Daniele, volevo sapere una cosa...hai mai testato i laser Feungsake? Sarei propenso per acquistare il loro laser con area di lavoro molto estesa!!! Addirittura 200*240 cm!!! Il mio dubbio rimane sulla qualità del modulo laser.... sarebbe un 22w ottici....come il Neje E80! Volevo sapere se hai mai avuto tra le mani un loro laser!

[@yusufsalim5524]

hi, can it cut thru 4mm fibreglass composite?

[@flixmyswitch]

No 100%

[@LaszloBagi]

Its a shame these are not bad with a full enclosure and exhaust fan like the Roly 10

[@Dead_inside....]

Один парень использовал кислородный балон, было интересно) Резался металический корпус от пк)

[@alirezarahimi3708]

very very nice

[@Rouverius]

You mean "engraves in color" like creating temper colors in stainless steel?

[@DanieleTartaglia]

Yes 👍😀

[@jwoodshed1108]

No color or color on the Italian video

[@Fancylooks]

No colour but marvellous cut!

[@taloot123]

Yes liers

[@Vitalic39]

Зачем такую фотку ставить, если самой цветной гравировки нету?

[@zolatanaffa87]

ero di passaggio...Vediamo cosa fa il Daniele stavolta. usti! pure primo commento, wow tricche ballacche e putitu! Ah la versione "mondiale" del video parlato, ok!

[@DanieleTartaglia]

Ciao Zola, si è la versione per "tutti" quelli che non conoscono l' italiano 😜

[@zolatanaffa87]

@@DanieleTartaglia Ottimo montaggio, davvero comprensibile ! Alle prossime!

[@subhradeepsharma]

Nice

[@azadiIranaziz]

❤درودبرشمــــــــــــــــا مبارکت باشه،عالی، بسلامتی .ممنـــــــــــــــــــــــــــون

[@otter5555]

clickbait-no color engraving

[@carlosalexan2]

Bellissimo video amico mio! Inoltre, un promemoria della tua promessa di rilasciare la seconda parte del video laser CNC che hai realizzato. Ricordare? Quello che dice che dopo aver raggiunto i 30.000 verrebbe rilasciato? Ha già raggiunto più di 45mila e ancora non è uscito! È tempo! Un abbraccio!

[@DanieleTartaglia]

Potresti mettere il link del video? intendi la mini cnc con vecchi cdrom?

[@carlosalexan2]

@@DanieleTartaglia SÌ! Questo! kzbin.info/www/bejne/iZLQhKyQqdh0a6c&si=EnSIkaIECMiOmarE

[@bigcheesevirus]

No burn on the wood top with no tape I call bullshit.

[@daves1203]

Good video but could really do without the music.....

[@HalkerVeil]

6:38 Getting to the point of the thumbnail...

[@Lugh21]

Ciao, il codice promozionale non sembra funzionare.

[@DanieleTartaglia]

Vieni sulla mia pagina telegram per i coupon. Troverai il link nella descrizione

[@klausbrinck2137]

7:21 Why didn´t you search how deep the engraving of metal can go, using high resolution (thin lines)? It seems as a promising way of cutting thin metal, if several passes are made... That would be the main use for me, since humans cut wood pretty precise and with much ease since millenia, while precise metal cutting still is in its infancy.

[@SintaxBSD]

What do you mean precise metal cutting is still in its infancy? what makes you think that?

[@klausbrinck2137]

@@SintaxBSD I meant for home-makers, and not if you can spend millions on it...

[@makerartfamily]

Un bel giocattolo! Troppo costoso però. Non trovo giusto il prezzo per un prodotto in serie. Forse non ha mercato? Lo comprerei, ma non a questo prezzo. Complimenti per i video 👍

[@DanieleTartaglia]

Grazie innanzitutto, Comunque guarda che su tomtop era a meno di 900 euro. e' una bella macchina, ne ho provate tante e posso dirti che non è da prezzo pieno, ma se segui la mia pagina telegram, potresti trovarlo anche a 700€

[@stresaoutdoor]

@@DanieleTartaglia seguo subito la tua pagina ! sono un Fan dei prodotti Crality, ho in officina 3 stampanti di quest aazienda, cercavo un laser di buona qualità e credo proprio acquisterò questo. Grazie per il video esaustivo su questa macchina.

[@josephKEOarthur]

CLICKBAIT - WARNING !

[@Massimo68ac]

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🤗🤗💜💜💜💜

[@myronv4390]

Thank you for not telling me anything and making me read a video 🤬

[@Bazzdiver]

That thumbnail ist totally faked with these saturated colors!

[@drbelli]

wtf?!

[@DailyTipshowto]

1mm steel can cut this machine

[@usenowdesijugad]

Very good brother from.... #usenowdesijugad