INCUBATOR AND EGG BOX

[@HBPExotics]

Awesome video Gavin...a lot of info...helpful info

[@Balls2U]

Thanks for watching

[@rachelscott3084]

Awesome video Gavin! Always learn so much from your videos!!

[@Balls2U]

Thanks Rachel 😊😊

[@joshuahigar7779]

Great info. Thanks for sharing.

[@Balls2U]

Glad I can help 😊👍

[@stevenajera5908]

You always keep it 💯 thanks for the info. It will be a great help.

[@Balls2U]

It's the only way to be 😊👍

[@BrunoSaraviaPhotography]

Hi Man!, this video is one of the simple and greatest in KZbin I could find, very nice job. I just have one question, those plastic containers where you put the eggs are hermetic sealed or have holes so the eggs can breath? Thank you

[@robnagle26]

Great vlog man thanks for all the great information have a nice day

[@Balls2U]

Glad you enjoyed it 😊

[@adventureswithreptiles1659]

Thanks for the tips! 🙂👍

[@Balls2U]

Your welcome 👍

[@itsmeluke1990]

Great advice! Keeping it simple, thanks gavin! 👍

[@Balls2U]

I agree 😊👍 keep it simple

[@BillPerryBCPythons]

Great tips!! And right on time!! Thank you very much!

[@Balls2U]

Hope it helps 😊👍

[@GraysReptiles]

Another great video. May I request when you touch on this subject again if you could please show a video of your incubator setup. That would be awesome. Thank you as always for sharing this great information.

[@Balls2U]

For sure my friend 👍

[@GraysReptiles]

Balls2U thank you.

[@calissaobviouslycannotdeci7419]

Good advice for us newbies...

[@Balls2U]

Thank you

[@MarroneMade]

Your channel provides such honest advice its invaluable. Thank you!

[@Balls2U]

Thank you for your support 😊👍

[@GoingYooper]

I had them in my egg box till I seen it was stable and took them out. Holding strong.Great stuff Gavin.thanks for all you do.

[@Balls2U]

Thanks for watching 👍

[@Dub.45]

Awesome Gavin, I just build an incubator and was wondering about these things. Expecting a clutch in about ten days. This video saved me loads of time and worry. Thanks a lot, your vids. always help me out so much.

[@Balls2U]

Best of luck with your clutch 😊👍

[@shannongrimes4807]

This was SPOT ON!!!!!!!!!!! Thanks so much Gavin this was soooooo helpful!!👏👏👏

[@Balls2U]

Your very welcome 😊

[@powerhousereptiles6314]

Awesome video!! Iv learned so much watching your videos it's good to have someone that gives great knowledge and like you say yours is all from your personal experience I apply a lot of the stuff you say with my collection and have to say everything's great but just wanna say thanks again for your awesome "videos" big fan!!

[@Balls2U]

Thank you glad I can help 😊👍

[@KYKonstrictorsandExotics]

Awesome video... going thru my first clutch right now. Did the exact same thing with the didgital probe inside the egg box. This helped me alot. Huge relief off of my shoulders. Thanks man.

[@Balls2U]

Best of luck with your clutch 👍

[@KYKonstrictorsandExotics]

Balls2U thanks bro... I need it lol

[@boxingboa]

Wonderful video Governor. I agree. I use temp in the egg box when I M.I. but I found I never look at it. I pay more attention to humidity.

[@Balls2U]

Thanks brotha 👍

[@geofflewis8144]

Awesome video sir more more more!

[@Balls2U]

😊🙏🙏🙏🙏🙏

[@briantrujillo81]

Gavin, u been helping me along the way for years now.. And I still learn from you! thanks bro awesome video

[@Balls2U]

I'm glad I can help bro 👍

[@nicolahall2556]

Great vid Gav. Nicand Ball Pythons

[@Balls2U]

Thank you 😊

[@theserpentscave5812]

Great video love the infomation

[@Balls2U]

Thank you 😊👍

[@jeremiehasbrouck979]

Excellent tip. Love watching you. My wife and I have an ultramel project going. Any tips for that particular morph?

[@Balls2U]

Make as many different combo hets as possible for future projects. best of luck 👍

[@Im_localtherian]

Gav, great educational vlog once again champ. Cheers. 👍🤓

[@Balls2U]

Thank you 😊

[@TC-King]

Really well timed video for me hahah Thanks! great video :)

[@Balls2U]

I'm leaning 😂😂😂

[@macksmorphs153]

Ha ha ha ha ,,,just what I need bro ,,,all sorted in the incubator now 👌🏻👌🏻👍👍

[@Balls2U]

😂😂😂 awesome bro 👍

[@jasonsamson1563]

Thank you Gavin for all the info I always appreciate it.

[@Balls2U]

Great to hear and thanks for watching 👍

[@SpartanReptiles]

Great video Gavin! I truly appreciate you bring this to everyone’s attention

[@Balls2U]

Thanks brotha, hope the family are well 👍

[@levigowens6953]

Great info, I've been curious if this myself

[@Balls2U]

Thanks for watching

[@t.aexotics427]

Great video gav,I was like that my first clutch lol,putting multiple thermometers in the incubator,I think it is just wanting to protect the little babies inside as best we can,now experience now allows me to be a bit more sensible about it 👍

[@Balls2U]

I agree 👍

[@BOYZBALLZ]

Great vid mate, 👌

[@Balls2U]

Cheers mate

[@neilphillips810]

Hi Gavin, i had a go at making a incubator out of an old vivarium, i got the temp up ok but at night the temps in the incubator drops by 2 or 3 degrees, is that ok or should i try something else? I have been keeping my eye out for a drinks cooler but no joy with that so far. Cheers mate 👍👍👍

[@Balls2U]

It's not going to hurt however the stat should keep it up to temp

[@neilphillips810]

Balls2U ok thanks Gavin.

[@ThePythonBurrow]

Great video!!

[@Balls2U]

Thanks brotha

[@ballullmustang]

Awesome info I have seen a few with more thermometers than egg boxes lol it's seemed to redundant to me and what you say makes more sense

[@BrianGundy]

Great video My Friend. Brian / FGS

[@Balls2U]

As always thanks for tuning in my friend 😊👍

[@jimiwilliams7176]

If the temp is bang on now i run the incubator for months the humidity in the incubator is holding at 90% the tubs in the herpxotics incubator are rubs 5 litre so not air tight do i need a hole in the front and back as the eggs are a couple of days old and have a dimple in the top of them and its a 50 50 mix vermiculite water or do they need more humidity

[@matthewrice1226]

I know I’m really late here but. I’m going to be having my first clutch soon. So just to recap as you said. Make sure the incubator itself is set to 89.5-90 degrees Fahrenheit.

[@neilphillips810]

Hi Gavin, i know you said just get the incubator to 90degrees and not worry about temps in the egg box, but the temp in my test egg box is 85-86 degrees but stable day and night, is that ok? My actual incubator is between 88 and 90 depending on time of day. Thanks Gavin.

[@Balls2U]

Yes that will be fine, over the course of the 55-60 days it will change and you should have babies 😉👍🏼

[@neilphillips810]

@@Balls2U brilliant, thanks for your time again Gavin.

[@briantrujillo81]

probe in the middle of the middle. Thanks bro gonna change mine now. have mine in the middle front. thanks gavin!

[@crystaltripi6775]

If I breed snakes that be me one hundred percent, freaking at temps , freaking cause the eggs has a dimple, so I think it is better I just keep to pets and leave all the hard work to pros like you great video will be very helpful information for newer breeders and maybe even some with a little experience under their belts thank you so much for sharing 😊

[@Balls2U]

I'm sure you would make a awesome breeder 😊

[@LucasLandonRoyals]

Whoaaaa! The eggs change the temperature in the egg box?!?! How?

[@Balls2U]

Yes, because the embryo is growing and moving

[@nrnr6895]

Gavin great video! Please next one is about switching live to frozen thawed :D ı really need your advices about that. Have a good day.

[@Balls2U]

That's coming in the next few days

[@nrnr6895]

Balls2U Great!

[@nrnr6895]

I also have tried almost everything. He s not even interesting about frozen thawed. But when ı put alive rat he never misses always wants to eat.

[@shednscalz4620]

Can we see your incubator. Do you have any homemade incubators or have you in the past can we see pics?

[@Balls2U]

Yes, I did do a video on it a few years ago, but I'll do a update on it soon

[@jimellisGF_Exotics]

Educate the masses brotha!

[@Balls2U]

That's the way to do it brotha!!

[@bubbat6498]

Hey gavin I just wanted to say thank you! I recently got a spider female from pet co which I know I shouldn't have but she was so beautiful I wanted to save her. She came home with mites😢 I recently saw a video of yours about how you used bedding and got mites. I ditched the bedding and got rid of the mites.😊 I also so your video about strike feeding and drop feeding. I set her set up similar to what you do and guess what?! She had her first strike feed ever for me lastnight😁😊😊 so thank you very much I'm so happy

[@Balls2U]

That's great to hear, glad all's going well

[@hilljacklife2073]

Dude you know im new and dammit i was going to put one in my egg box when i got my first eggs LOL ! Thanks for the info and now I know not to put it in there ! Get info ! you keep it up dude ! Great vid!

[@Balls2U]

Your welcome dude 😉👍

[@dciexotics2008]

Nice vid

[@Balls2U]

Thanks

[@t.jagnew4417]

Sorry bud ive done exactly as uve said haha eggs due soon. Do u mean put the thermostat probe of the mat and put it in the middle of the incubator itself ? Or middle of the heat mat ? Going now to rip all temp probes out of egg box haha

[@Balls2U]

Put the prob in the middle of the middle in the incubator

[@t.jagnew4417]

Balls2U thank you buddy ! So not attached to the heat mat actually attached in the middle of the incubator

[@Balls2U]

That's right

[@lkbpythons6210]

Great advice one again from snake god

[@Balls2U]

😊🙏 thank you

[@chrisgraham2837]

👍🏻 not long now until Donny will see you there mate

[@Balls2U]

Look forward to it mate 👍

[@reesespythons]

👍👍

[@Balls2U]

Thanks G

[@TRreptiles]

Great stuff Gavin. You don’t want to over think it. KISS Keep It Simple Stupid Lol

[@Balls2U]

😂😂😂 totally agree Bud

[@scottgoveiareptiles]

My temps are reading 88.5 but when I temp gun my eggs their self they are reading 86 why that

[@Snackbadger]

Im going to run out of stuff to ask you in Glasgow.

[@Balls2U]

Haha I'm sure there will be plenty to talk about 👍

[@saveon231]

I just saw this video and I actually put my a thermometer inside the egg box and my incubator is at 89 but inside the egg box it reads 98 is that bad

[@Balls2U]

Your thermometer is faulty...... It can't be hotter inside the egg box then the incubator

[@saveon231]

Balls2U that’s what I thought thanks so much because I have an extra thermometer on top and middle and they all read 89

[@janebritishborn3901]

Hey Gavin! How are u hope ur ok 💗

[@Balls2U]

Hey Jane, alls OK, hope your OK too

[@janebritishborn3901]

Balls2U all good thankyou ! X

[@Balls2U]

Good 😊

[@janebritishborn3901]

Balls2U 🌶 !! Lol

[@BrunoSaraviaPhotography]

Hi Man!, this video is one of the simple and greatest in KZbin I could find, very nice job. I just have one question, those plastic containers where you put the eggs are hermetic sealed or have holes so the eggs can breath? Thank you

[@BrunoSaraviaPhotography]

Hi Man!, this video is one of the simple and greatest in KZbin I could find, very nice job. I just have one question, those plastic containers where you put the eggs are hermetic sealed or have holes so the eggs can breath? Thank you

[@BrunoSaraviaPhotography]

Hi Man!, this video is one of the simple and greatest in KZbin I could find, very nice job. I just have one question, those plastic containers where you put the eggs are hermetic sealed or have holes so the eggs can breath? Thank you